diff mbox

[v3,1/2] dt-bindings: Add INNOLUX P079ZCA panel bindings

Message ID 1490147587-4382-1-git-send-email-zyw@rock-chips.com
State New, archived
Headers show

Commit Message

Chris Zhong March 22, 2017, 1:53 a.m. UTC
The Innolux P079ZCA is a 7.85" panel with a 768X1024 resolution and
connected to DSI using four lanes.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
---

Changes in v3: None
Changes in v2: None

 .../bindings/display/panel/innolux,p079zca.txt     | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
new file mode 100644
index 0000000..5c70a83
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/innolux,p079zca.txt
@@ -0,0 +1,23 @@ 
+Innolux P079ZCA 7.85" 768x1024 TFT LCD panel
+
+Required properties:
+- compatible: should be "innolux,p079zca"
+- reg: DSI virtual channel of the peripheral
+- power-supply: phandle of the regulator that provides the supply voltage
+- enable-gpios: panel enable gpio
+
+Optional properties:
+- backlight: phandle of the backlight device attached to the panel
+
+Example:
+
+	&mipi_dsi {
+		panel {
+			compatible = "innolux,p079zca";
+			reg = <0>;
+			power-supply = <...>;
+			backlight = <&backlight>;
+			enable-gpios = <&gpio1 13 GPIO_ACTIVE_HIGH>;
+			status = "okay";
+		};
+	};