diff mbox

[v4,2/4] dt-bindings: add the grf clock for dw-mipi-dsi

Message ID 1490147691-4489-3-git-send-email-zyw@rock-chips.com
State New, archived
Headers show

Commit Message

Chris Zhong March 22, 2017, 1:54 a.m. UTC
For RK3399, the grf clock should be controlled by dw-mipi-dsi driver,
add the description for this clock.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
---

Changes in v4:
- remove "additional"

Changes in v3: None
Changes in v2: None

 .../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt       | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Rob Herring March 24, 2017, 6:27 p.m. UTC | #1
On Wed, Mar 22, 2017 at 09:54:49AM +0800, Chris Zhong wrote:
> For RK3399, the grf clock should be controlled by dw-mipi-dsi driver,
> add the description for this clock.
> 
> Signed-off-by: Chris Zhong <zyw@rock-chips.com>
> Reviewed-by: Sean Paul <seanpaul@chromium.org>
> ---
> 
> Changes in v4:
> - remove "additional"
> 
> Changes in v3: None
> Changes in v2: None
> 
>  .../devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt       | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)

Acked-by: Rob Herring <robh@kernel.org>
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
index 188f6f7..1d722f5 100644
--- a/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
+++ b/Documentation/devicetree/bindings/display/rockchip/dw_mipi_dsi_rockchip.txt
@@ -10,7 +10,7 @@  Required properties:
 - interrupts: Represent the controller's interrupt to the CPU(s).
 - clocks, clock-names: Phandles to the controller's pll reference
   clock(ref) and APB clock(pclk). For RK3399, a phy config clock
-  (phy_cfg) is additional required. As described in [1].
+  (phy_cfg) and a grf clock(grf) are required. As described in [1].
 - rockchip,grf: this soc should set GRF regs to mux vopl/vopb.
 - ports: contain a port node with endpoint definitions as defined in [2].
   For vopb,set the reg = <0> and set the reg = <1> for vopl.