@@ -210,8 +210,61 @@
};
grf: syscon@11000000 {
- compatible = "syscon";
+ compatible = "syscon", "simple-mfd";
reg = <0x11000000 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ u2phy0: usb2-phy@760 {
+ compatible = "rockchip,rk3228-usb2phy";
+ reg = <0x0760 0x0c>;
+ clocks = <&cru SCLK_OTGPHY0>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "usb480m_phy0";
+ status = "disabled";
+
+ u2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "otg-bvalid", "otg-id",
+ "linestate";
+ status = "disabled";
+ };
+
+ u2phy0_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+ };
+
+ u2phy1: usb2-phy@800 {
+ compatible = "rockchip,rk3228-usb2phy";
+ reg = <0x0800 0x0c>;
+ clocks = <&cru SCLK_OTGPHY1>;
+ clock-names = "phyclk";
+ #clock-cells = <0>;
+ clock-output-names = "usb480m_phy1";
+ status = "disabled";
+
+ u2phy1_otg: otg-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+
+ u2phy1_host: host-port {
+ #phy-cells = <0>;
+ interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "linestate";
+ status = "disabled";
+ };
+ };
};
uart0: serial@11010000 {
@@ -467,6 +520,89 @@
status = "disabled";
};
+ usb_otg: usb@30040000 {
+ compatible = "rockchip,rk3228-usb", "rockchip,rk3066-usb",
+ "snps,dwc2";
+ reg = <0x30040000 0x40000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_OTG>;
+ clock-names = "otg";
+ dr_mode = "otg";
+ g-np-tx-fifo-size = <16>;
+ g-rx-fifo-size = <280>;
+ g-tx-fifo-size = <256 128 128 64 32 16>;
+ g-use-dma;
+ phys = <&u2phy0_otg>;
+ phy-names = "usb2-phy";
+ status = "disabled";
+ };
+
+ usb_host0_ehci: usb@30080000 {
+ compatible = "generic-ehci";
+ reg = <0x30080000 0x20000>;
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&u2phy0>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy0_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@300a0000 {
+ compatible = "generic-ohci";
+ reg = <0x300a0000 0x20000>;
+ interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST0>, <&u2phy0>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy0_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@300c0000 {
+ compatible = "generic-ehci";
+ reg = <0x300c0000 0x20000>;
+ interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST1>, <&u2phy1>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@300e0000 {
+ compatible = "generic-ohci";
+ reg = <0x300e0000 0x20000>;
+ interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST1>, <&u2phy1>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host2_ehci: usb@30100000 {
+ compatible = "generic-ehci";
+ reg = <0x30100000 0x20000>;
+ interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST2>, <&u2phy1>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ clock-names = "usbhost", "utmi";
+ status = "disabled";
+ };
+
+ usb_host2_ohci: usb@30120000 {
+ compatible = "generic-ohci";
+ reg = <0x30120000 0x20000>;
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_HOST2>, <&u2phy1>;
+ clock-names = "usbhost", "utmi";
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
gmac: ethernet@30200000 {
compatible = "rockchip,rk3228-gmac";
reg = <0x30200000 0x10000>;
This patch adds usb otg/host controllers and phys nodes on rk322x. Signed-off-by: William Wu <william.wu@rock-chips.com> --- arch/arm/boot/dts/rk322x.dtsi | 138 +++++++++++++++++++++++++++++++++++++++++- 1 file changed, 137 insertions(+), 1 deletion(-)