Message ID | 1498874567-11219-5-git-send-email-jacob-chen@iotwrt.com (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Hi Jacob, Am Samstag, 1. Juli 2017, 10:02:46 CEST schrieb Jacob Chen: > saradc in rk3288-evb use 1.8v ref. > > Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> > --- > arch/arm/boot/dts/rk3288-evb.dtsi | 14 ++++++++++++++ > 1 file changed, 14 insertions(+) > > diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi > index f226ca7..9cee856 100644 > --- a/arch/arm/boot/dts/rk3288-evb.dtsi > +++ b/arch/arm/boot/dts/rk3288-evb.dtsi > @@ -129,6 +129,15 @@ > }; > }; > > + vccadc_ref: vccadc-ref { > + compatible = "regulator-fixed"; > + regulator-name = "vcc1v8_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + }; this looks wrong. Regulators should always be named with the name used in schematics and also, according to the rk3288-evb schematics I have here, the saradc uses vcc_18 directly which comes from either the rk808 or act8846 pmics (depending on the board version). > + > /* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */ > vcc_host: vcc-host-regulator { > compatible = "regulator-fixed"; > @@ -218,6 +227,11 @@ > status = "okay"; > }; > > +&saradc { > + vref-supply = <&vccadc_ref>; So taking the above into account vref-supply = <&vcc_18>; ? Heiko > + status = "okay"; > +}; > + > &sdmmc { > bus-width = <4>; > cap-mmc-highspeed; >
diff --git a/arch/arm/boot/dts/rk3288-evb.dtsi b/arch/arm/boot/dts/rk3288-evb.dtsi index f226ca7..9cee856 100644 --- a/arch/arm/boot/dts/rk3288-evb.dtsi +++ b/arch/arm/boot/dts/rk3288-evb.dtsi @@ -129,6 +129,15 @@ }; }; + vccadc_ref: vccadc-ref { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + }; + /* This turns on USB vbus for both host0 (ehci) and host1 (dwc2) */ vcc_host: vcc-host-regulator { compatible = "regulator-fixed"; @@ -218,6 +227,11 @@ status = "okay"; }; +&saradc { + vref-supply = <&vccadc_ref>; + status = "okay"; +}; + &sdmmc { bus-width = <4>; cap-mmc-highspeed;
saradc in rk3288-evb use 1.8v ref. Signed-off-by: Jacob Chen <jacob-chen@iotwrt.com> --- arch/arm/boot/dts/rk3288-evb.dtsi | 14 ++++++++++++++ 1 file changed, 14 insertions(+)