From patchwork Tue Jan 14 07:22:56 2020 Content-Type: text/plain; charset="utf-8" MIME-Version: 1.0 Content-Transfer-Encoding: 7bit X-Patchwork-Submitter: Shawn Lin X-Patchwork-Id: 11331393 Return-Path: Received: from mail.kernel.org (pdx-korg-mail-1.web.codeaurora.org [172.30.200.123]) by pdx-korg-patchwork-2.web.codeaurora.org (Postfix) with ESMTP id 77CFD13A0 for ; Tue, 14 Jan 2020 07:24:13 +0000 (UTC) Received: from bombadil.infradead.org (bombadil.infradead.org [198.137.202.133]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by mail.kernel.org (Postfix) with ESMTPS id 52C29207E0 for ; Tue, 14 Jan 2020 07:24:13 +0000 (UTC) Authentication-Results: mail.kernel.org; dkim=pass (2048-bit key) header.d=lists.infradead.org header.i=@lists.infradead.org header.b="Aaiq8KqL" DMARC-Filter: OpenDMARC Filter v1.3.2 mail.kernel.org 52C29207E0 Authentication-Results: mail.kernel.org; dmarc=none (p=none dis=none) header.from=rock-chips.com Authentication-Results: mail.kernel.org; spf=none smtp.mailfrom=linux-rockchip-bounces+patchwork-linux-rockchip=patchwork.kernel.org@lists.infradead.org DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=lists.infradead.org; s=bombadil.20170209; h=Sender: Content-Transfer-Encoding:Content-Type:MIME-Version:Cc:List-Subscribe: List-Help:List-Post:List-Archive:List-Unsubscribe:List-Id:References: In-Reply-To:Message-Id:Date:Subject:To:From:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:List-Owner; bh=2BUd0GJEAMcXMbEQdo+pBu8X0tZYLx4BbbNk+mrC0F4=; b=Aaiq8KqLK84QWo7HKSxrhg9mNQ yxGN+A9JGLIbL42FyyQK5BBkkQ50gczs/R58aKW4bbvsiFUiWfXwGbI6AVyMBTIPETlDtIW6R2a4F zdfhMSADu6JiCCd6ES+Htsbxyw4reYmvSyKU8bck+9bnfyUeo/KgZBu+7GfOUicdqZjkxobZfuRUS NVRskiRwJbVaSQ15YNhFR2zR2Pn3CEVPIpgYdMzfGOIoBUayoMqkH7TqkSMINPrkCH4YL4TF0doit UbLuDBN/1j2o1ETGRD5RbJHuDMyMe4qcO122A7edIzwlhVD1nZwRzdXoDFf1g9IbmvANJzsIX1MT+ B9U5G0Dw==; Received: from localhost ([127.0.0.1] helo=bombadil.infradead.org) by bombadil.infradead.org with esmtp (Exim 4.92.3 #3 (Red Hat Linux)) id 1irGYb-0000h1-Rr; Tue, 14 Jan 2020 07:24:09 +0000 Received: from lucky1.263xmail.com ([211.157.147.135]) by bombadil.infradead.org with esmtps (Exim 4.92.3 #3 (Red Hat Linux)) id 1irGYW-0000fN-Ff for linux-rockchip@lists.infradead.org; Tue, 14 Jan 2020 07:24:07 +0000 Received: from localhost (unknown [192.168.167.16]) by lucky1.263xmail.com (Postfix) with ESMTP id B51464FD23; Tue, 14 Jan 2020 15:24:02 +0800 (CST) X-MAIL-GRAY: 1 X-MAIL-DELIVERY: 0 X-ADDR-CHECKED4: 1 X-ANTISPAM-LEVEL: 2 X-ABS-CHECKED: 0 Received: from localhost.localdomain (unknown [58.22.7.114]) by smtp.263.net (postfix) whith ESMTP id P5437T140292994864896S1578986620990337_; Tue, 14 Jan 2020 15:24:03 +0800 (CST) X-IP-DOMAINF: 1 X-UNIQUE-TAG: X-RL-SENDER: shawn.lin@rock-chips.com X-SENDER: lintao@rock-chips.com X-LOGIN-NAME: shawn.lin@rock-chips.com X-FST-TO: heiko@sntech.de X-SENDER-IP: 58.22.7.114 X-ATTACHMENT-NUM: 0 X-DNS-TYPE: 0 From: Shawn Lin To: Heiko Stuebner , Lorenzo Pieralisi , Rob Herring , Kishon Vijay Abraham I , Bjorn Helgaas Subject: [PATCH 2/6] phy/rockchip: inno-combophy: Add initial support Date: Tue, 14 Jan 2020 15:22:56 +0800 Message-Id: <1578986580-71974-3-git-send-email-shawn.lin@rock-chips.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1578986580-71974-1-git-send-email-shawn.lin@rock-chips.com> References: <1578986580-71974-1-git-send-email-shawn.lin@rock-chips.com> X-CRM114-Version: 20100106-BlameMichelson ( TRE 0.8.0 (BSD) ) MR-646709E3 X-CRM114-CacheID: sfid-20200113_232405_059644_03C09636 X-CRM114-Status: GOOD ( 22.99 ) X-Spam-Score: 1.5 (+) X-Spam-Report: SpamAssassin version 3.4.2 on bombadil.infradead.org summary: Content analysis details: (1.5 points) pts rule name description ---- ---------------------- -------------------------------------------------- -0.0 RCVD_IN_DNSWL_NONE RBL: Sender listed at https://www.dnswl.org/, no trust [211.157.147.135 listed in list.dnswl.org] 1.5 RCVD_IN_SORBS_WEB RBL: SORBS: sender is an abusable web server [58.22.7.114 listed in dnsbl.sorbs.net] 0.0 T_SPF_PERMERROR SPF: test of record failed (permerror) 0.0 SPF_HELO_NONE SPF: HELO does not publish an SPF Record X-BeenThere: linux-rockchip@lists.infradead.org X-Mailman-Version: 2.1.29 Precedence: list List-Id: Upstream kernel work for Rockchip platforms List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Cc: devicetree@vger.kernel.org, Simon Xue , Jingoo Han , Shawn Lin , linux-rockchip@lists.infradead.org, linux-pci@vger.kernel.org, William Wu MIME-Version: 1.0 Sender: "Linux-rockchip" Errors-To: linux-rockchip-bounces+patchwork-linux-rockchip=patchwork.kernel.org@lists.infradead.org From: William Wu Add initial support for inno-combophy driver which supports USB3.0 host/device/otg mode as well as PCIe EP/RC mode. Signed-off-by: William Wu Signed-off-by: Shawn Lin --- drivers/phy/rockchip/Kconfig | 8 + drivers/phy/rockchip/Makefile | 1 + drivers/phy/rockchip/phy-rockchip-inno-combphy.c | 1056 ++++++++++++++++++++++ 3 files changed, 1065 insertions(+) create mode 100644 drivers/phy/rockchip/phy-rockchip-inno-combphy.c diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig index 0824b9d..267306a 100644 --- a/drivers/phy/rockchip/Kconfig +++ b/drivers/phy/rockchip/Kconfig @@ -16,6 +16,14 @@ config PHY_ROCKCHIP_EMMC help Enable this to support the Rockchip EMMC PHY. +config PHY_ROCKCHIP_INNO_COMBPHY + tristate "Rockchip INNO USB 3.0 and PCIe COMBPHY Driver" + depends on (ARCH_ROCKCHIP && OF) || COMPILE_TEST + select GENERIC_PHY + help + Enable this to support the Rockchip SoCs COMBPHY. + If unsure, say N. + config PHY_ROCKCHIP_INNO_HDMI tristate "Rockchip INNO HDMI PHY Driver" depends on (ARCH_ROCKCHIP || COMPILE_TEST) && OF diff --git a/drivers/phy/rockchip/Makefile b/drivers/phy/rockchip/Makefile index 9f59a81..6813b95 100644 --- a/drivers/phy/rockchip/Makefile +++ b/drivers/phy/rockchip/Makefile @@ -1,6 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 obj-$(CONFIG_PHY_ROCKCHIP_DP) += phy-rockchip-dp.o obj-$(CONFIG_PHY_ROCKCHIP_EMMC) += phy-rockchip-emmc.o +obj-$(CONFIG_PHY_ROCKCHIP_INNO_COMBPHY) += phy-rockchip-inno-combphy.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_DSIDPHY) += phy-rockchip-inno-dsidphy.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_HDMI) += phy-rockchip-inno-hdmi.o obj-$(CONFIG_PHY_ROCKCHIP_INNO_USB2) += phy-rockchip-inno-usb2.o diff --git a/drivers/phy/rockchip/phy-rockchip-inno-combphy.c b/drivers/phy/rockchip/phy-rockchip-inno-combphy.c new file mode 100644 index 0000000..4656ecc --- /dev/null +++ b/drivers/phy/rockchip/phy-rockchip-inno-combphy.c @@ -0,0 +1,1056 @@ +// SPDX-License-Identifier: GPL-2.0 +/* + * Rockchip USB3.0 and PCIE COMBPHY with Innosilicon IP block driver + * + * Copyright (C) 2018 Fuzhou Rockchip Electronics Co., Ltd. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define BIT_WRITEABLE_SHIFT 16 + +struct rockchip_combphy_priv; + +enum rockchip_combphy_rst { + OTG_RSTN = 0, + PHY_POR_RSTN = 1, + PHY_APB_RSTN = 2, + PHY_PIPE_RSTN = 3, + PHY_GRF_P_RSTN = 4, + PHY_RESET_MAX = 5, +}; + +struct combphy_reg { + u32 offset; + u32 bitend; + u32 bitstart; + u32 disable; + u32 enable; +}; + +struct rockchip_combphy_grfcfg { + struct combphy_reg pipe_l1_sel; + struct combphy_reg pipe_l1_set; + struct combphy_reg pipe_l1pd_sel; + struct combphy_reg pipe_l1pd_p3; + struct combphy_reg pipe_l0pd_sel; + struct combphy_reg pipe_l0pd_p3; + struct combphy_reg pipe_clk_sel; + struct combphy_reg pipe_clk_set; + struct combphy_reg pipe_rate_sel; + struct combphy_reg pipe_rate_set; + struct combphy_reg pipe_mode_sel; + struct combphy_reg pipe_mode_set; + struct combphy_reg pipe_txrx_sel; + struct combphy_reg pipe_txrx_set; + struct combphy_reg pipe_width_sel; + struct combphy_reg pipe_width_set; + struct combphy_reg pipe_usb3_sel; + struct combphy_reg pipe_pll_lock; + struct combphy_reg pipe_status_l0; + struct combphy_reg pipe_l0rxterm_sel; + struct combphy_reg pipe_l1rxterm_sel; + struct combphy_reg pipe_l0rxterm_set; + struct combphy_reg pipe_l1rxterm_set; + struct combphy_reg pipe_l0rxelec_set; + struct combphy_reg u3_port_disable; + struct combphy_reg u3_port_num; +}; + +struct rockchip_combphy_cfg { + const struct rockchip_combphy_grfcfg grfcfg; + int (*combphy_cfg)(struct rockchip_combphy_priv *priv); + int (*combphy_low_power_ctrl)(struct rockchip_combphy_priv *priv, + bool en); +}; + +struct rockchip_combphy_priv { + bool phy_initialized; + bool phy_suspended; + u8 phy_type; + void __iomem *mmio; + struct device *dev; + struct clk *ref_clk; + struct phy *phy; + struct regmap *combphy_grf; + struct regmap *usb_pcie_grf; + struct reset_control *rsts[PHY_RESET_MAX]; + const struct rockchip_combphy_cfg *cfg; +}; + +static const char *get_reset_name(enum rockchip_combphy_rst rst) +{ + switch (rst) { + case OTG_RSTN: + return "otg-rst"; + case PHY_POR_RSTN: + return "combphy-por"; + case PHY_APB_RSTN: + return "combphy-apb"; + case PHY_PIPE_RSTN: + return "combphy-pipe"; + case PHY_GRF_P_RSTN: + return "usb3phy_grf_p"; + default: + return "invalid"; + } +} + +static inline bool param_read(struct regmap *base, + const struct combphy_reg *reg, u32 val) +{ + int ret; + u32 mask, orig, tmp; + + ret = regmap_read(base, reg->offset, &orig); + if (ret) + return false; + + mask = GENMASK(reg->bitend, reg->bitstart); + tmp = (orig & mask) >> reg->bitstart; + + return tmp == val; +} + +static inline int param_write(struct regmap *base, + const struct combphy_reg *reg, bool en) +{ + u32 val, mask, tmp; + + tmp = en ? reg->enable : reg->disable; + mask = GENMASK(reg->bitend, reg->bitstart); + val = (tmp << reg->bitstart) | (mask << BIT_WRITEABLE_SHIFT); + + return regmap_write(base, reg->offset, val); +} + +static inline bool param_exped(void __iomem *base, + const struct combphy_reg *reg, + unsigned int value) +{ + int ret; + unsigned int tmp, orig; + unsigned int mask = GENMASK(reg->bitend, reg->bitstart); + + ret = regmap_read(base, reg->offset, &orig); + if (ret) + return false; + + tmp = (orig & mask) >> reg->bitstart; + + return tmp == value; +} + +static ssize_t u3phy_mode_show(struct device *device, + struct device_attribute *attr, + char *buf) +{ + struct rockchip_combphy_priv *priv = dev_get_drvdata(device); + + if (param_exped(priv->usb_pcie_grf, + &priv->cfg->grfcfg.u3_port_num, 0)) + return sprintf(buf, "u2\n"); + else + return sprintf(buf, "u3\n"); +} + +static ssize_t u3phy_mode_store(struct device *device, + struct device_attribute *attr, + const char *buf, size_t count) +{ + struct rockchip_combphy_priv *priv = dev_get_drvdata(device); + + if (!strncmp(buf, "u3", 2) && + param_exped(priv->usb_pcie_grf, + &priv->cfg->grfcfg.u3_port_num, 0)) { + /* + * Enable USB 3.0 rx termination, need to select + * pipe_l0_rxtermination from USB 3.0 controller. + */ + param_write(priv->combphy_grf, + &priv->cfg->grfcfg.pipe_l0rxterm_sel, false); + /* Set xHCI USB 3.0 port number to 1 */ + param_write(priv->usb_pcie_grf, + &priv->cfg->grfcfg.u3_port_num, true); + /* Enable xHCI USB 3.0 port */ + param_write(priv->usb_pcie_grf, + &priv->cfg->grfcfg.u3_port_disable, false); + dev_info(priv->dev, + "Set usb3.0 and usb2.0 mode successfully\n"); + } else if (!strncmp(buf, "u2", 2) && + param_exped(priv->usb_pcie_grf, + &priv->cfg->grfcfg.u3_port_num, 1)) { + /* + * Disable USB 3.0 rx termination, need to select + * pipe_l0_rxtermination from grf and remove rx + * termimation by grf. + */ + param_write(priv->combphy_grf, + &priv->cfg->grfcfg.pipe_l0rxterm_set, false); + param_write(priv->combphy_grf, + &priv->cfg->grfcfg.pipe_l0rxterm_sel, true); + /* Set xHCI USB 3.0 port number to 0 */ + param_write(priv->usb_pcie_grf, + &priv->cfg->grfcfg.u3_port_num, false); + /* Disable xHCI USB 3.0 port */ + param_write(priv->usb_pcie_grf, + &priv->cfg->grfcfg.u3_port_disable, true); + /* + * Note: + * Don't disable the USB 3.0 PIPE pclk here(set reg + * pipe_usb3_sel to false), because USB 3.0 PHY depend + * on this clk, if we disable it, we need to reinit + * the USB 3.0 PHY when use USB 3.0 mode, in order to + * simplify the process, don't disable this PIPE pclk. + */ + dev_info(priv->dev, "Set usb2.0 only mode successfully\n"); + } else { + dev_info(priv->dev, "Same or illegal mode\n"); + } + + return count; +} + +static DEVICE_ATTR_RW(u3phy_mode); + +static struct attribute *rockchip_combphy_u3mode_attrs[] = { + &dev_attr_u3phy_mode.attr, + NULL, +}; + +static struct attribute_group rockchip_combphy_u3mode_attr_group = { + .name = NULL, /* we want them in the same directory */ + .attrs = rockchip_combphy_u3mode_attrs, +}; + +static u32 rockchip_combphy_pll_lock(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *grfcfg; + u32 mask, val; + + grfcfg = &priv->cfg->grfcfg; + mask = GENMASK(grfcfg->pipe_pll_lock.bitend, + grfcfg->pipe_pll_lock.bitstart); + + regmap_read(priv->combphy_grf, grfcfg->pipe_pll_lock.offset, &val); + val = (val & mask) >> grfcfg->pipe_pll_lock.bitstart; + + return val; +} + +static u32 rockchip_combphy_is_ready(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *grfcfg; + u32 mask, val; + + grfcfg = &priv->cfg->grfcfg; + mask = GENMASK(grfcfg->pipe_status_l0.bitend, + grfcfg->pipe_status_l0.bitstart); + + regmap_read(priv->combphy_grf, grfcfg->pipe_status_l0.offset, &val); + val = (val & mask) >> grfcfg->pipe_status_l0.bitstart; + + return val; +} + +static int phy_pcie_init(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *grfcfg; + u32 val; + int ret = 0; + + grfcfg = &priv->cfg->grfcfg; + + /* reset PCIe phy to default configuration */ + reset_control_assert(priv->rsts[PHY_POR_RSTN]); + reset_control_assert(priv->rsts[PHY_APB_RSTN]); + reset_control_assert(priv->rsts[PHY_PIPE_RSTN]); + + reset_control_deassert(priv->rsts[PHY_POR_RSTN]); + /* Wait PHY power on stable */ + udelay(5); + reset_control_deassert(priv->rsts[PHY_APB_RSTN]); + udelay(5); + + /* Set rxtermination for lane0 */ + param_write(priv->combphy_grf, &grfcfg->pipe_l0rxterm_set, true); + /* Set rxtermination for lane1 */ + param_write(priv->combphy_grf, &grfcfg->pipe_l1rxterm_set, true); + /* Select pipe_l0_rxtermination from grf */ + param_write(priv->combphy_grf, &grfcfg->pipe_l0rxterm_sel, true); + /* Select pipe_l1_rxtermination from grf */ + param_write(priv->combphy_grf, &grfcfg->pipe_l1rxterm_sel, true); + /* Select rxelecidle_disable and txcommonmode from PCIe controller */ + param_write(priv->combphy_grf, &grfcfg->pipe_txrx_sel, false); + + /* Start to configurate PHY registers for PCIE. */ + if (priv->cfg->combphy_cfg) { + ret = priv->cfg->combphy_cfg(priv); + if (ret) + goto error; + } + + /* Wait Tx PLL lock */ + usleep_range(300, 350); + ret = readx_poll_timeout_atomic(rockchip_combphy_pll_lock, priv, val, + val == grfcfg->pipe_pll_lock.enable, + 10, 1000); + if (ret) { + dev_err(priv->dev, "wait phy PLL lock timeout\n"); + goto error; + } + + reset_control_deassert(priv->rsts[PHY_PIPE_RSTN]); +error: + return ret; +} + +static int phy_u3_init(struct rockchip_combphy_priv *priv) +{ + const struct rockchip_combphy_grfcfg *grfcfg; + u32 val; + int ret = 0; + + grfcfg = &priv->cfg->grfcfg; + + /* Reset the USB3 controller first. */ + reset_control_assert(priv->rsts[OTG_RSTN]); + + reset_control_deassert(priv->rsts[PHY_POR_RSTN]); + /* Wait PHY power on stable. */ + udelay(5); + + reset_control_deassert(priv->rsts[PHY_APB_RSTN]); + udelay(5); + + /* + * Start to configurate PHY registers for USB3. + * Note: set operation must be done before corresponding + * sel operation, otherwise, the PIPE PHY status lane0 + * may be unable to get ready. + */ + + /* Disable PHY lane1 which isn't needed for USB3 */ + param_write(priv->combphy_grf, &grfcfg->pipe_l1_set, true); + param_write(priv->combphy_grf, &grfcfg->pipe_l1_sel, true); + + /* Set PHY Tx and Rx for USB3 */ + param_write(priv->combphy_grf, &grfcfg->pipe_txrx_set, true); + param_write(priv->combphy_grf, &grfcfg->pipe_txrx_sel, true); + + /* Set PHY PIPE MAC pclk request */ + param_write(priv->combphy_grf, &grfcfg->pipe_clk_set, true); + param_write(priv->combphy_grf, &grfcfg->pipe_clk_sel, true); + + /* Set PHY PIPE rate for USB3 */ + param_write(priv->combphy_grf, &grfcfg->pipe_rate_set, true); + param_write(priv->combphy_grf, &grfcfg->pipe_rate_sel, true); + + /* Set PHY mode for USB3 */ + param_write(priv->combphy_grf, &grfcfg->pipe_mode_set, true); + param_write(priv->combphy_grf, &grfcfg->pipe_mode_sel, true); + + /* Set PHY data bus width for USB3 */ + param_write(priv->combphy_grf, &grfcfg->pipe_width_set, true); + param_write(priv->combphy_grf, &grfcfg->pipe_width_sel, true); + + /* Select PIPE for USB3 */ + param_write(priv->combphy_grf, &grfcfg->pipe_usb3_sel, true); + + if (priv->cfg->combphy_cfg) { + ret = priv->cfg->combphy_cfg(priv); + if (ret) + goto error; + } + + /* Wait Tx PLL lock */ + usleep_range(300, 350); + ret = readx_poll_timeout_atomic(rockchip_combphy_pll_lock, priv, val, + val == grfcfg->pipe_pll_lock.enable, + 10, 1000); + if (ret) { + dev_err(priv->dev, "wait phy PLL lock timeout\n"); + goto error; + } + + reset_control_deassert(priv->rsts[PHY_PIPE_RSTN]); + + /* Wait PIPE PHY status lane0 ready */ + ret = readx_poll_timeout_atomic(rockchip_combphy_is_ready, priv, val, + val == grfcfg->pipe_status_l0.enable, + 10, 1000); + if (ret) { + dev_err(priv->dev, "wait phy status lane0 ready timeout\n"); + goto error; + } + + reset_control_deassert(priv->rsts[OTG_RSTN]); + +error: + return ret; +} + +static int rockchip_combphy_set_phy_type(struct rockchip_combphy_priv *priv) +{ + int ret = 0; + + if (priv->phy_initialized) + return ret; + + switch (priv->phy_type) { + case PHY_TYPE_PCIE: + ret = phy_pcie_init(priv); + break; + case PHY_TYPE_USB3: + ret = phy_u3_init(priv); + if (ret) + return ret; + + /* Attributes */ + ret = sysfs_create_group(&priv->dev->kobj, + &rockchip_combphy_u3mode_attr_group); + break; + default: + dev_err(priv->dev, "incompatible PHY type\n"); + return -EINVAL; + } + + return ret; +} + +static int rockchip_combphy_init(struct phy *phy) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + int ret; + + ret = clk_prepare_enable(priv->ref_clk); + if (ret) { + dev_err(priv->dev, "failed to enable ref_clk\n"); + return ret; + } + + ret = rockchip_combphy_set_phy_type(priv); + if (ret) { + dev_err(priv->dev, "failed to set phy type\n"); + return ret; + } + + priv->phy_initialized = true; + + return 0; +} + +static int rockchip_combphy_exit(struct phy *phy) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + + /* + * Note: don't assert PHY reset here, because + * we set many phy configurations during phy + * init to reduce PHY power consumption, if we + * assert PHY reset here, these configurations + * will be lost, and increase power consumption. + */ + clk_disable_unprepare(priv->ref_clk); + + /* in case of waiting phy PLL lock timeout */ + if (priv->phy_type == PHY_TYPE_PCIE) { + reset_control_assert(priv->rsts[PHY_GRF_P_RSTN]); + udelay(5); + reset_control_deassert(priv->rsts[PHY_GRF_P_RSTN]); + priv->phy_initialized = false; + } + + return 0; +} + +static int rockchip_combphy_power_on(struct phy *phy) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + const struct rockchip_combphy_grfcfg *grfcfg; + + if (!priv->phy_suspended) + return 0; + + grfcfg = &priv->cfg->grfcfg; + + if (priv->phy_type == PHY_TYPE_USB3) { + if (priv->cfg->combphy_low_power_ctrl) + priv->cfg->combphy_low_power_ctrl(priv, false); + + /* Enable lane 0 squelch detection */ + param_write(priv->combphy_grf, &grfcfg->pipe_l0rxelec_set, + false); + + /* + * Check if lane 0 powerdown is already + * controlled by USB 3.0 controller. + */ + if (param_read(priv->combphy_grf, + &grfcfg->pipe_l0pd_sel, 0)) + goto done; + + /* Exit to P0 from P3 */ + param_write(priv->combphy_grf, &grfcfg->pipe_l0pd_p3, false); + usleep_range(250, 300); + + /* + * Set lane 0 powerdown to be controlled + * by USB 3.0 controller. + */ + param_write(priv->combphy_grf, &grfcfg->pipe_l0pd_sel, false); + } + +done: + priv->phy_suspended = false; + return 0; +} + +static int rockchip_combphy_power_off(struct phy *phy) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + const struct rockchip_combphy_grfcfg *grfcfg; + + if (priv->phy_suspended) + return 0; + + grfcfg = &priv->cfg->grfcfg; + + if (priv->phy_type != PHY_TYPE_USB3 && + priv->phy_type != PHY_TYPE_PCIE) + goto done; + + /* + * Check if lane 0 powerdown is already + * controlled by grf and in P3 state. + */ + if (param_read(priv->combphy_grf, + &grfcfg->pipe_l0pd_sel, 1) && + param_read(priv->combphy_grf, + &grfcfg->pipe_l0pd_p3, 3)) + goto done; + + /* Exit to P0 */ + param_write(priv->combphy_grf, &grfcfg->pipe_l0pd_p3, false); + param_write(priv->combphy_grf, &grfcfg->pipe_l0pd_sel, true); + udelay(1); + + /* Enter to P3 from P0 */ + param_write(priv->combphy_grf, &grfcfg->pipe_l0pd_p3, true); + udelay(2); + + /* + * Disable lane 0 squelch detection. + * Note: if squelch detection is disabled, + * the PHY can't detect LFPS. + */ + param_write(priv->combphy_grf, &grfcfg->pipe_l0rxelec_set, + true); + + if (priv->cfg->combphy_low_power_ctrl) + priv->cfg->combphy_low_power_ctrl(priv, true); + +done: + priv->phy_suspended = true; + return 0; +} + +static int rockchip_combphy_set_mode_ext(struct phy *phy, + enum phy_mode mode, int submode) +{ + struct rockchip_combphy_priv *priv = phy_get_drvdata(phy); + u32 reg; + + if (priv->phy_type != PHY_TYPE_PCIE || mode != PHY_MODE_PCIE) + return -EINVAL; + + reg = readl(priv->mmio + 0x21a8); + + /* + * PCI-e EP/RC runtime special cfg. + * submode 1 is for EP, and 0 is for RC. + */ + if (submode == 1) + reg |= (0x1 << 2); + else if (submode == 0) + reg &= ~(0x1 << 2); + else + return -EINVAL; + + writel(reg, priv->mmio + 0x21a8); + return 0; +} + +static const struct phy_ops rockchip_combphy_ops = { + .init = rockchip_combphy_init, + .exit = rockchip_combphy_exit, + .power_on = rockchip_combphy_power_on, + .power_off = rockchip_combphy_power_off, + .set_mode = rockchip_combphy_set_mode_ext, + .owner = THIS_MODULE, +}; + +static struct phy *rockchip_combphy_xlate(struct device *dev, + struct of_phandle_args *args) +{ + struct rockchip_combphy_priv *priv = dev_get_drvdata(dev); + + if (args->args_count < 1) { + dev_err(dev, "invalid number of arguments\n"); + return ERR_PTR(-EINVAL); + } + + if (priv->phy_type != PHY_NONE && + priv->phy_type != args->args[0]) { + dev_err(dev, "type select %d overwriting phy type %d\n", + args->args[0], priv->phy_type); + return ERR_PTR(-ENODEV); + } + + priv->phy_type = args->args[0]; + + if (priv->phy_type < PHY_TYPE_SATA || + priv->phy_type > PHY_TYPE_USB3) { + dev_err(dev, "invalid phy type select argument\n"); + return ERR_PTR(-EINVAL); + } + + return priv->phy; +} + +static int rockchip_combphy_parse_dt(struct device *dev, + struct rockchip_combphy_priv *priv) +{ + u32 i; + + priv->combphy_grf = + syscon_regmap_lookup_by_phandle(dev->of_node, + "rockchip,combphygrf"); + if (IS_ERR(priv->combphy_grf)) { + dev_err(dev, "failed to find combphy grf regmap\n"); + return PTR_ERR(priv->combphy_grf); + } + + priv->usb_pcie_grf = + syscon_regmap_lookup_by_phandle(dev->of_node, + "rockchip,usbpciegrf"); + if (IS_ERR(priv->usb_pcie_grf)) { + dev_err(dev, "failed to find usb_pcie_grf regmap\n"); + return PTR_ERR(priv->usb_pcie_grf); + } + + priv->ref_clk = devm_clk_get(dev, "refclk"); + if (IS_ERR(priv->ref_clk)) { + dev_err(dev, "failed to find ref clock\n"); + return PTR_ERR(priv->ref_clk); + } + + for (i = 0; i < PHY_RESET_MAX; i++) { + priv->rsts[i] = + devm_reset_control_get(dev, get_reset_name(i)); + if (IS_ERR(priv->rsts[i])) { + dev_warn(dev, "no %s reset control specified\n", + get_reset_name(i)); + priv->rsts[i] = NULL; + } + } + + return 0; +} + +static int rockchip_combphy_probe(struct platform_device *pdev) +{ + struct phy_provider *phy_provider; + struct device *dev = &pdev->dev; + struct rockchip_combphy_priv *priv; + struct resource *res; + const struct rockchip_combphy_cfg *phy_cfg; + int ret; + + phy_cfg = of_device_get_match_data(dev); + if (!phy_cfg) { + dev_err(dev, "No OF match data provided\n"); + return -EINVAL; + } + + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); + if (!priv) + return -ENOMEM; + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + priv->mmio = devm_ioremap_resource(dev, res); + if (IS_ERR(priv->mmio)) { + ret = PTR_ERR(priv->mmio); + return ret; + } + + ret = rockchip_combphy_parse_dt(dev, priv); + if (ret) { + dev_err(dev, "parse dt failed, ret(%d)\n", ret); + return ret; + } + + reset_control_assert(priv->rsts[PHY_POR_RSTN]); + reset_control_assert(priv->rsts[PHY_APB_RSTN]); + reset_control_assert(priv->rsts[PHY_PIPE_RSTN]); + + priv->phy_type = PHY_NONE; + priv->dev = dev; + priv->cfg = phy_cfg; + priv->phy = devm_phy_create(dev, NULL, &rockchip_combphy_ops); + if (IS_ERR(priv->phy)) { + dev_err(dev, "failed to create combphy\n"); + return PTR_ERR(priv->phy); + } + + dev_set_drvdata(dev, priv); + phy_set_drvdata(priv->phy, priv); + + phy_provider = + devm_of_phy_provider_register(dev, + rockchip_combphy_xlate); + return PTR_ERR_OR_ZERO(phy_provider); +} + +static int rockchip_combphy_remove(struct platform_device *pdev) +{ + struct rockchip_combphy_priv *priv = platform_get_drvdata(pdev); + + if (priv->phy_type == PHY_TYPE_USB3 && + priv->phy_initialized) + sysfs_remove_group(&priv->dev->kobj, + &rockchip_combphy_u3mode_attr_group); + + return 0; +} + +static int rk1808_combphy_cfg(struct rockchip_combphy_priv *priv) +{ + unsigned long rate; + u32 reg; + bool ssc_en = false; + + rate = clk_get_rate(priv->ref_clk); + + /* Configure PHY reference clock frequency */ + switch (rate) { + case 24000000: + /* + * The default PHY refclk frequency + * configuration is 24MHz. + */ + break; + case 25000000: + writel(0x00, priv->mmio + 0x2118); + writel(0x64, priv->mmio + 0x211c); + writel(0x01, priv->mmio + 0x2020); + writel(0x64, priv->mmio + 0x2028); + writel(0x21, priv->mmio + 0x2030); + + if (priv->phy_type == PHY_TYPE_PCIE) { + writel(0x1, priv->mmio + 0x3020); + writel(0x64, priv->mmio + 0x3028); + writel(0x21, priv->mmio + 0x3030); + } + + break; + case 50000000: + writel(0x00, priv->mmio + 0x2118); + writel(0x32, priv->mmio + 0x211c); + writel(0x01, priv->mmio + 0x2020); + writel(0x32, priv->mmio + 0x2028); + writel(0x21, priv->mmio + 0x2030); + break; + default: + dev_err(priv->dev, "Unsupported rate: %lu\n", rate); + return -EINVAL; + } + + if (priv->phy_type == PHY_TYPE_PCIE) { + /* turn on pcie phy pd */ + writel(0x08400000, priv->mmio + 0x0); + writel(0x03030000, priv->mmio + 0x8); + + /* Adjust Lane 0 Rx interface timing */ + writel(0x20, priv->mmio + 0x20ac); + writel(0x12, priv->mmio + 0x20c8); + writel(0x76, priv->mmio + 0x2150); + + /* Adjust Lane 1 Rx interface timing */ + writel(0x20, priv->mmio + 0x30ac); + writel(0x12, priv->mmio + 0x30c8); + writel(0x76, priv->mmio + 0x3150); + /* Set PHY output refclk path */ + writel(0x0, priv->mmio + 0x21a4); + writel(0x0, priv->mmio + 0x21a8); + writel(0xb, priv->mmio + 0x21ec); + + /* Physical ordered set for PCIe */ + writel(0x02, priv->mmio + 0x45c0); + writel(0x83, priv->mmio + 0x45c4); + writel(0x03, priv->mmio + 0x45c8); + writel(0x43, priv->mmio + 0x45cc); + writel(0x00, priv->mmio + 0x45d0); + writel(0xbc, priv->mmio + 0x45d4); + + /* Boost pre-emphasis */ + writel(0xaa, priv->mmio + 0x21b8); + writel(0xaa, priv->mmio + 0x31b8); + } else if (priv->phy_type == PHY_TYPE_USB3) { + /* + * Disable PHY Lane 1 which isn't needed + * for USB3 to reduce power consumption. + */ + /* Lane 1 cdr power down */ + writel(0x09, priv->mmio + 0x3148); + + /* Lane 1 rx bias disable */ + writel(0x01, priv->mmio + 0x21cc); + + /* Lane 1 cdr disable */ + writel(0x08, priv->mmio + 0x30c4); + writel(0x08, priv->mmio + 0x20f4); + + /* Lane 1 rx lock disable and tx bias disable */ + writel(0x12, priv->mmio + 0x3150); + + /* Lane 1 rx termination disable, and tx_cmenb disable */ + writel(0x04, priv->mmio + 0x3080); + + /* Lane 1 tx termination disable */ + writel(0x1d, priv->mmio + 0x3090); + + /* Lane 1 tx driver disable */ + writel(0x50, priv->mmio + 0x21c4); + writel(0x10, priv->mmio + 0x2050); + + /* Lane 1 txldo_refsel disable */ + writel(0x81, priv->mmio + 0x31a8); + + /* Lane 1 txdetrx_en disable */ + writel(0x00, priv->mmio + 0x31e8); + + /* Lane 1 rxcm_en disable */ + writel(0x08, priv->mmio + 0x30c0); + + /* Adjust Lane 0 Rx interface timing */ + writel(0x20, priv->mmio + 0x20ac); + + /* Set and enable SSC */ + switch (rate) { + case 24000000: + /* Set SSC rate to 31.25KHz */ + reg = readl(priv->mmio + 0x2108); + reg = (reg & ~0xf) | 0x1; + writel(reg, priv->mmio + 0x2108); + ssc_en = true; + break; + case 25000000: + /* Set SSC rate to 32.55KHz */ + reg = readl(priv->mmio + 0x2108); + reg = (reg & ~0xf) | 0x6; + writel(reg, priv->mmio + 0x2108); + ssc_en = true; + break; + default: + dev_warn(priv->dev, + "failed to set SSC on rate: %lu\n", rate); + break; + } + + if (ssc_en) { + /* Enable SSC */ + reg = readl(priv->mmio + 0x2120); + reg &= ~BIT(4); + writel(reg, priv->mmio + 0x2120); + + reg = readl(priv->mmio + 0x2000); + reg &= ~0x6; + writel(reg, priv->mmio + 0x2000); + } + + /* + * Tuning Tx: + * offset 0x21b8 bit[7:4]: lane 0 TX driver swing + * tuning bits with weight, "1111" represents the + * largest swing and "0000" the smallest. + */ + reg = readl(priv->mmio + 0x21b8); + reg = (reg & ~0xf0) | 0xe0; + writel(reg, priv->mmio + 0x21b8); + + /* + * Tuning Rx for RJTL: + * Decrease CDR Chump Bump current. + */ + reg = readl(priv->mmio + 0x20c8); + reg = (reg & ~0x6) | BIT(1); + writel(reg, priv->mmio + 0x20c8); + reg = readl(priv->mmio + 0x2150); + reg |= BIT(2); + writel(reg, priv->mmio + 0x2150); + } else { + dev_err(priv->dev, "failed to cfg incompatible PHY type\n"); + return -EINVAL; + } + + return 0; +} + +static int rk1808_combphy_low_power_control(struct rockchip_combphy_priv *priv, + bool en) +{ + if (priv->phy_type != PHY_TYPE_USB3) { + /* turn off pcie phy pd */ + writel(0x08400840, priv->mmio + 0x0); + writel(0x03030303, priv->mmio + 0x8); + + /* enter PCIe phy low power mode */ + writel(0x36, priv->mmio + 0x2150); + writel(0x36, priv->mmio + 0x3150); + writel(0x02, priv->mmio + 0x21e8); + writel(0x02, priv->mmio + 0x31e8); + writel(0x0c, priv->mmio + 0x2080); + writel(0x0c, priv->mmio + 0x3080); + writel(0x08, priv->mmio + 0x20c0); + writel(0x08, priv->mmio + 0x30c0); + writel(0x08, priv->mmio + 0x2058); + + writel(0x10, priv->mmio + 0x2044); + writel(0x10, priv->mmio + 0x21a8); + writel(0x10, priv->mmio + 0x31a8); + writel(0x08, priv->mmio + 0x2058); + writel(0x08, priv->mmio + 0x3058); + writel(0x40, priv->mmio + 0x205c); + writel(0x40, priv->mmio + 0x305c); + writel(0x08, priv->mmio + 0x2184); + writel(0x08, priv->mmio + 0x3184); + writel(0x00, priv->mmio + 0x2150); + writel(0x00, priv->mmio + 0x3150); + writel(0x10, priv->mmio + 0x20e0); + writel(0x00, priv->mmio + 0x21e8); + writel(0x00, priv->mmio + 0x31e8); + + return 0; + } + + if (en) { + /* Lane 0 tx_biasen disable */ + writel(0x36, priv->mmio + 0x2150); + + /* Lane 0 txdetrx_en disable */ + writel(0x02, priv->mmio + 0x21e8); + + /* Lane 0 tx_cmenb disable */ + writel(0x0c, priv->mmio + 0x2080); + + /* Lane 0 rxcm_en disable */ + writel(0x08, priv->mmio + 0x20c0); + + /* Lane 0 and Lane 1 bg_pwrdn */ + writel(0x10, priv->mmio + 0x2044); + + /* Lane 0 and Lane 1 rcomp_osenseampen disable */ + writel(0x08, priv->mmio + 0x2058); + + /* Lane 0 txldo_refsel disable and LDO disable */ + writel(0x91, priv->mmio + 0x21a8); + + /* Lane 1 LDO disable */ + writel(0x91, priv->mmio + 0x31a8); + } else { + /* Lane 0 tx_biasen enable */ + writel(0x76, priv->mmio + 0x2150); + + /* Lane 0 txdetrx_en enable */ + writel(0x02, priv->mmio + 0x21e8); + + /* Lane 0 tx_cmenb enable */ + writel(0x08, priv->mmio + 0x2080); + + /* Lane 0 rxcm_en enable */ + writel(0x18, priv->mmio + 0x20c0); + + /* Lane 0 and Lane 1 bg_pwrdn */ + writel(0x00, priv->mmio + 0x2044); + + /* Lane 0 and Lane 1 rcomp_osenseampen enable */ + writel(0x28, priv->mmio + 0x2058); + + /* Lane 0 txldo_refsel enable and LDO enable */ + writel(0x01, priv->mmio + 0x21a8); + + /* Lane 1 LDO enable */ + writel(0x81, priv->mmio + 0x31a8); + } + + return 0; +} + +static const struct rockchip_combphy_cfg rk1808_combphy_cfgs = { + .grfcfg = { + .pipe_l1_sel = { 0x0000, 15, 11, 0x00, 0x1f }, + .pipe_l1_set = { 0x0008, 13, 8, 0x00, 0x13 }, + .pipe_l1rxterm_sel = { 0x0000, 12, 12, 0x0, 0x1 }, + .pipe_l1pd_sel = { 0x0000, 11, 11, 0x0, 0x1}, + .pipe_l1pd_p3 = { 0x0008, 9, 8, 0x0, 0x3 }, + .pipe_l0rxterm_sel = { 0x0000, 7, 7, 0x0, 0x1 }, + .pipe_l0pd_sel = { 0x0000, 6, 6, 0x0, 0x1 }, + .pipe_l0pd_p3 = { 0x0008, 1, 0, 0x0, 0x3 }, + .pipe_clk_sel = { 0x0000, 3, 3, 0x0, 0x1 }, + .pipe_clk_set = { 0x0004, 7, 6, 0x1, 0x0 }, + .pipe_rate_sel = { 0x0000, 2, 2, 0x0, 0x1 }, + .pipe_rate_set = { 0x0004, 5, 4, 0x0, 0x1 }, + .pipe_mode_sel = { 0x0000, 1, 1, 0x0, 0x1 }, + .pipe_mode_set = { 0x0004, 3, 2, 0x0, 0x1 }, + .pipe_txrx_sel = { 0x0004, 15, 8, 0x10, 0x2f }, + .pipe_txrx_set = { 0x0008, 15, 14, 0x0, 0x3 }, + .pipe_l1rxterm_set = { 0x0008, 10, 10, 0x0, 0x1 }, + .pipe_l0rxterm_set = { 0x0008, 2, 2, 0x0, 0x1 }, + .pipe_l0rxelec_set = { 0x0008, 6, 6, 0x0, 0x1 }, + .pipe_width_sel = { 0x0000, 0, 0, 0x0, 0x1 }, + .pipe_width_set = { 0x0004, 1, 0, 0x2, 0x0 }, + .pipe_usb3_sel = { 0x000c, 0, 0, 0x0, 0x1 }, + .pipe_pll_lock = { 0x0034, 14, 14, 0x0, 0x1 }, + .pipe_status_l0 = { 0x0034, 7, 7, 0x1, 0x0 }, + .u3_port_disable = { 0x0434, 0, 0, 0, 1}, + .u3_port_num = { 0x0434, 15, 12, 0, 1}, + }, + .combphy_cfg = rk1808_combphy_cfg, + .combphy_low_power_ctrl = rk1808_combphy_low_power_control, +}; + +static const struct of_device_id rockchip_combphy_of_match[] = { + { + .compatible = "rockchip,rk1808-combphy", + .data = &rk1808_combphy_cfgs, + }, + { }, +}; + +MODULE_DEVICE_TABLE(of, rockchip_combphy_of_match); + +static struct platform_driver rockchip_combphy_driver = { + .probe = rockchip_combphy_probe, + .remove = rockchip_combphy_remove, + .driver = { + .name = "rockchip-combphy", + .of_match_table = rockchip_combphy_of_match, + }, +}; +module_platform_driver(rockchip_combphy_driver); + +MODULE_AUTHOR("Rockchip Inc."); +MODULE_DESCRIPTION("Rockchip USB3.0 and PCIE COMBPHY driver"); +MODULE_LICENSE("GPL v2");