| Message ID | 1578986580-71974-5-git-send-email-shawn.lin@rock-chips.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | Add Rockchip new PCIe controller and combo phy support | expand |
On Tue, Jan 14, 2020 at 03:22:58PM +0800, Shawn Lin wrote: > From: Simon Xue <xxm@rock-chips.com> > > Signed-off-by: Simon Xue <xxm@rock-chips.com> > Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com> > --- > > .../devicetree/bindings/pci/rockchip-dw-pcie.yaml | 132 +++++++++++++++++++++ > 1 file changed, 132 insertions(+) > create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml: properties:rockchip,usbpciegrf: {'items': [{'description': 'The grf for COMBPHY configuration and state registers.'}]} is not valid under any of the given schemas (Possible causes of the failure): /builds/robherring/linux-dt-review/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml: properties:rockchip,usbpciegrf: 'description' is a required property > > diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml > new file mode 100644 > index 0000000..c5205f6 > --- /dev/null > +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml > @@ -0,0 +1,132 @@ > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) > +%YAML 1.2 > +--- > +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml# > +$schema: http://devicetree.org/meta-schemas/core.yaml# > + > +title: DesignWare based PCIe RC controller on Rockchip SoCs > + > +maintainers: > + - Shawn Lin <shawn.lin@rock-chips.com> > + - Simon Xue <xxm@rock-chips.com> indent 2 spaces. > + You need to reference pci-bus.yaml. > +properties: > + compatible: > + enum: > + - rockchip,rk1808-pcie > + - snps,dw-pcie This means the compatible is one of these 2 strings. It's also going to be a problem because it will match on all DTs with 'snps,dw-pcie'. Look at some of the 'arm,primecell' schema for how to avoid that with 'select'. > + > + reg: > + maxItems: 2 > + > + clocks: > + items: > + - description: High speed clock for PCIe > + - description: Low speed clock for PCIe > + - description: AHB clock for PCIe > + - description: APB clock for PCIe > + - description: Auxiliary clock for PCIe > + > + clock-names: > + items: > + - const: hsclk > + - const: lsclk > + - const: aclk > + - const: pclk > + - const: sclk-aux > + > + resets: > + items: > + - description: PCIe niu high reset line > + - description: PCIe niu low reset line > + - description: PCIe grf reset line > + - description: PCIe control reset line > + - description: PCIe control powerup reset line > + - description: PCIe control master reset line > + - description: PCIe control slave reset line > + - description: PCIe control dbi reset line > + - description: PCIe control button reset line > + - description: PCIe control power engine reset line > + - description: PCIe control core reset line > + - description: PCIe control non-sticky reset line > + - description: PCIe control sticky reset line > + - description: PCIe control power reset line > + - description: PCIe niu ahb reset line > + - description: PCIe niu apb reset line > + > + reset-names: > + items: > + - const: niu-h > + - const: niu-l > + - const: grf-p > + - const: ctl-p > + - const: ctl-powerup > + - const: ctl-mst-a > + - const: ctl-slv-a > + - const: ctl-dbi-a > + - const: ctl-button > + - const: ctl-pe > + - const: ctl-core > + - const: ctl-nsticky > + - const: ctl-sticky > + - const: ctl-pwr > + - const: ctl-niu-a > + - const: ctl-niu-p > + > + rockchip,usbpciegrf: > + items: > + - description: The grf for COMBPHY configuration and state registers. > + > +required: > + - compatible > + - reg > + - clocks > + - clock-names > + - msi-map > + - num-lanes > + - phys > + - phy-names > + - resets > + - reset-names > + - rockchip,usbpciegrf > + > +additionalProperties: false > + > +examples: > + - | > + usb_pcie_grf: syscon@fe040000 { > + compatible = "rockchip,usb-pcie-grf", "syscon"; > + reg = <0x0 0xfe040000 0x0 0x1000>; > + }; > + > + pcie0: pcie@fc400000 { > + compatible = "rockchip,rk1808-pcie", "snps,dw-pcie"; > + reg = <0x0 0xfc000000 0x0 0x400000>, > + <0x0 0xfc400000 0x0 0x10000>; > + clocks = <&cru HSCLK_PCIE>, <&cru LSCLK_PCIE>, > + <&cru ACLK_PCIE>, <&cru PCLK_PCIE>, > + <&cru SCLK_PCIE_AUX>; > + clock-names = "hsclk", "lsclk", > + "aclk", "pclk", > + "sclk-aux"; > + msi-map = <0x0 &its 0x0 0x1000>; > + num-lanes = <2>; > + phys = <&combphy PHY_TYPE_PCIE>; > + phy-names = "pcie-phy"; > + resets = <&cru SRST_PCIE_NIU_H>, <&cru SRST_PCIE_NIU_L>, > + <&cru SRST_PCIEGRF_P>, <&cru SRST_PCIECTL_P>, > + <&cru SRST_PCIECTL_POWERUP>, <&cru SRST_PCIECTL_MST_A>, > + <&cru SRST_PCIECTL_SLV_A>, <&cru SRST_PCIECTL_DBI_A>, > + <&cru SRST_PCIECTL_BUTTON>, <&cru SRST_PCIECTL_PE>, > + <&cru SRST_PCIECTL_CORE>, <&cru SRST_PCIECTL_NSTICKY>, > + <&cru SRST_PCIECTL_STICKY>, <&cru SRST_PCIECTL_PWR>, > + <&cru SRST_PCIE_NIU_A>, <&cru SRST_PCIE_NIU_P>; > + reset-names = "niu-h", "niu-l", "grf-p", "ctl-p", > + "ctl-powerup", "ctl-mst-a", "ctl-slv-a", > + "ctl-dbi-a", "ctl-button", "ctl-pe", > + "ctl-core", "ctl-nsticky", "ctl-sticky", > + "ctl-pwr", "ctl-niu-a", "ctl-niu-p"; > + rockchip,usbpciegrf = <&usb_pcie_grf>; You are missing a number of common, required PCI properties. > + }; > + > +... > -- > 1.9.1 > > >
diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml new file mode 100644 index 0000000..c5205f6 --- /dev/null +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml @@ -0,0 +1,132 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: DesignWare based PCIe RC controller on Rockchip SoCs + +maintainers: + - Shawn Lin <shawn.lin@rock-chips.com> + - Simon Xue <xxm@rock-chips.com> + +properties: + compatible: + enum: + - rockchip,rk1808-pcie + - snps,dw-pcie + + reg: + maxItems: 2 + + clocks: + items: + - description: High speed clock for PCIe + - description: Low speed clock for PCIe + - description: AHB clock for PCIe + - description: APB clock for PCIe + - description: Auxiliary clock for PCIe + + clock-names: + items: + - const: hsclk + - const: lsclk + - const: aclk + - const: pclk + - const: sclk-aux + + resets: + items: + - description: PCIe niu high reset line + - description: PCIe niu low reset line + - description: PCIe grf reset line + - description: PCIe control reset line + - description: PCIe control powerup reset line + - description: PCIe control master reset line + - description: PCIe control slave reset line + - description: PCIe control dbi reset line + - description: PCIe control button reset line + - description: PCIe control power engine reset line + - description: PCIe control core reset line + - description: PCIe control non-sticky reset line + - description: PCIe control sticky reset line + - description: PCIe control power reset line + - description: PCIe niu ahb reset line + - description: PCIe niu apb reset line + + reset-names: + items: + - const: niu-h + - const: niu-l + - const: grf-p + - const: ctl-p + - const: ctl-powerup + - const: ctl-mst-a + - const: ctl-slv-a + - const: ctl-dbi-a + - const: ctl-button + - const: ctl-pe + - const: ctl-core + - const: ctl-nsticky + - const: ctl-sticky + - const: ctl-pwr + - const: ctl-niu-a + - const: ctl-niu-p + + rockchip,usbpciegrf: + items: + - description: The grf for COMBPHY configuration and state registers. + +required: + - compatible + - reg + - clocks + - clock-names + - msi-map + - num-lanes + - phys + - phy-names + - resets + - reset-names + - rockchip,usbpciegrf + +additionalProperties: false + +examples: + - | + usb_pcie_grf: syscon@fe040000 { + compatible = "rockchip,usb-pcie-grf", "syscon"; + reg = <0x0 0xfe040000 0x0 0x1000>; + }; + + pcie0: pcie@fc400000 { + compatible = "rockchip,rk1808-pcie", "snps,dw-pcie"; + reg = <0x0 0xfc000000 0x0 0x400000>, + <0x0 0xfc400000 0x0 0x10000>; + clocks = <&cru HSCLK_PCIE>, <&cru LSCLK_PCIE>, + <&cru ACLK_PCIE>, <&cru PCLK_PCIE>, + <&cru SCLK_PCIE_AUX>; + clock-names = "hsclk", "lsclk", + "aclk", "pclk", + "sclk-aux"; + msi-map = <0x0 &its 0x0 0x1000>; + num-lanes = <2>; + phys = <&combphy PHY_TYPE_PCIE>; + phy-names = "pcie-phy"; + resets = <&cru SRST_PCIE_NIU_H>, <&cru SRST_PCIE_NIU_L>, + <&cru SRST_PCIEGRF_P>, <&cru SRST_PCIECTL_P>, + <&cru SRST_PCIECTL_POWERUP>, <&cru SRST_PCIECTL_MST_A>, + <&cru SRST_PCIECTL_SLV_A>, <&cru SRST_PCIECTL_DBI_A>, + <&cru SRST_PCIECTL_BUTTON>, <&cru SRST_PCIECTL_PE>, + <&cru SRST_PCIECTL_CORE>, <&cru SRST_PCIECTL_NSTICKY>, + <&cru SRST_PCIECTL_STICKY>, <&cru SRST_PCIECTL_PWR>, + <&cru SRST_PCIE_NIU_A>, <&cru SRST_PCIE_NIU_P>; + reset-names = "niu-h", "niu-l", "grf-p", "ctl-p", + "ctl-powerup", "ctl-mst-a", "ctl-slv-a", + "ctl-dbi-a", "ctl-button", "ctl-pe", + "ctl-core", "ctl-nsticky", "ctl-sticky", + "ctl-pwr", "ctl-niu-a", "ctl-niu-p"; + rockchip,usbpciegrf = <&usb_pcie_grf>; + }; + +...