diff mbox

clk: rockchip: add missing rk3288 npll rate table

Message ID 1631893.xHvKLXVMyM@phil (mailing list archive)
State New, archived
Headers show

Commit Message

Heiko Stuebner Sept. 24, 2014, 9:41 p.m. UTC
The npll on rk3288 is exactly the same pll type as the other 4. Yet it
was missing the link to the rate table, making rate changes impossible.
Change that by setting the table.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 drivers/clk/rockchip/clk-rk3288.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Doug Anderson Sept. 24, 2014, 10:51 p.m. UTC | #1
Heiko,

On Wed, Sep 24, 2014 at 2:41 PM, Heiko Stübner <heiko@sntech.de> wrote:
> The npll on rk3288 is exactly the same pll type as the other 4. Yet it
> was missing the link to the rate table, making rate changes impossible.
> Change that by setting the table.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>  drivers/clk/rockchip/clk-rk3288.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
> index 8ea885b..938d30b 100644
> --- a/drivers/clk/rockchip/clk-rk3288.c
> +++ b/drivers/clk/rockchip/clk-rk3288.c
> @@ -143,7 +143,7 @@ static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = {
>         [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12),
>                      RK3288_MODE_CON, 12, 8, rk3288_pll_rates),
>         [npll] = PLL(pll_rk3066, PLL_NPLL, "npll",  mux_pll_p, 0, RK3288_PLL_CON(16),
> -                    RK3288_MODE_CON, 14, 9, NULL),
> +                    RK3288_MODE_CON, 14, 9, rk3288_pll_rates),
>  };

Works for me.  Any reason not to add it to dpll, too?

-Doug
Kever Yang Sept. 25, 2014, 1:35 a.m. UTC | #2
Doug,

On 09/25/2014 06:51 AM, Doug Anderson wrote:
> Heiko,
>
> On Wed, Sep 24, 2014 at 2:41 PM, Heiko Stübner <heiko@sntech.de> wrote:
>> The npll on rk3288 is exactly the same pll type as the other 4. Yet it
>> was missing the link to the rate table, making rate changes impossible.
>> Change that by setting the table.
>>
>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>> ---
>>   drivers/clk/rockchip/clk-rk3288.c | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
>> index 8ea885b..938d30b 100644
>> --- a/drivers/clk/rockchip/clk-rk3288.c
>> +++ b/drivers/clk/rockchip/clk-rk3288.c
>> @@ -143,7 +143,7 @@ static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = {
>>          [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12),
>>                       RK3288_MODE_CON, 12, 8, rk3288_pll_rates),
>>          [npll] = PLL(pll_rk3066, PLL_NPLL, "npll",  mux_pll_p, 0, RK3288_PLL_CON(16),
>> -                    RK3288_MODE_CON, 14, 9, NULL),
>> +                    RK3288_MODE_CON, 14, 9, rk3288_pll_rates),
>>   };
> Works for me.  Any reason not to add it to dpll, too?
dpll is used for DDR controller only, I'm not sure memory scaling driver 
will use
the clock module API, because the code for memory scaling must moved to 
intmem
(dram is not available at that time), which need to be small enough, and 
it's not
possible to use the API from clock module.

So, I think it is no need to add the rate table to dpll.

-Kever
Kever Yang Sept. 25, 2014, 1:36 a.m. UTC | #3
Heiko,

On 09/25/2014 05:41 AM, Heiko Stübner wrote:
> The npll on rk3288 is exactly the same pll type as the other 4. Yet it
> was missing the link to the rate table, making rate changes impossible.
> Change that by setting the table.
>
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
> ---
>   drivers/clk/rockchip/clk-rk3288.c | 2 +-
>   1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
> index 8ea885b..938d30b 100644
> --- a/drivers/clk/rockchip/clk-rk3288.c
> +++ b/drivers/clk/rockchip/clk-rk3288.c
> @@ -143,7 +143,7 @@ static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = {
>   	[gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12),
>   		     RK3288_MODE_CON, 12, 8, rk3288_pll_rates),
>   	[npll] = PLL(pll_rk3066, PLL_NPLL, "npll",  mux_pll_p, 0, RK3288_PLL_CON(16),
> -		     RK3288_MODE_CON, 14, 9, NULL),
> +		     RK3288_MODE_CON, 14, 9, rk3288_pll_rates),
>   };
>   
>   static struct clk_div_table div_hclk_cpu_t[] = {
Tested-by: Kever Yang <kever.yang@rock-chips.com>
Doug Anderson Sept. 25, 2014, 3:56 a.m. UTC | #4
Kever,

On Wed, Sep 24, 2014 at 6:35 PM, Kever Yang <kever.yang@rock-chips.com> wrote:
> Doug,
>
>
> On 09/25/2014 06:51 AM, Doug Anderson wrote:
>>
>> Heiko,
>>
>> On Wed, Sep 24, 2014 at 2:41 PM, Heiko Stübner <heiko@sntech.de> wrote:
>>>
>>> The npll on rk3288 is exactly the same pll type as the other 4. Yet it
>>> was missing the link to the rate table, making rate changes impossible.
>>> Change that by setting the table.
>>>
>>> Signed-off-by: Heiko Stuebner <heiko@sntech.de>
>>> ---
>>>   drivers/clk/rockchip/clk-rk3288.c | 2 +-
>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/clk/rockchip/clk-rk3288.c
>>> b/drivers/clk/rockchip/clk-rk3288.c
>>> index 8ea885b..938d30b 100644
>>> --- a/drivers/clk/rockchip/clk-rk3288.c
>>> +++ b/drivers/clk/rockchip/clk-rk3288.c
>>> @@ -143,7 +143,7 @@ static struct rockchip_pll_clock rk3288_pll_clks[]
>>> __initdata = {
>>>          [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0,
>>> RK3288_PLL_CON(12),
>>>                       RK3288_MODE_CON, 12, 8, rk3288_pll_rates),
>>>          [npll] = PLL(pll_rk3066, PLL_NPLL, "npll",  mux_pll_p, 0,
>>> RK3288_PLL_CON(16),
>>> -                    RK3288_MODE_CON, 14, 9, NULL),
>>> +                    RK3288_MODE_CON, 14, 9, rk3288_pll_rates),
>>>   };
>>
>> Works for me.  Any reason not to add it to dpll, too?
>
> dpll is used for DDR controller only, I'm not sure memory scaling driver
> will use
> the clock module API, because the code for memory scaling must moved to
> intmem
> (dram is not available at that time), which need to be small enough, and
> it's not
> possible to use the API from clock module.
>
> So, I think it is no need to add the rate table to dpll.

Sure.  It seems to me like it wouldn't hurt to have it listed, but
you're right that it's probably impossible that it would ever be used
so I won't push for it.

Reviewed-by: Doug Anderson <dianders@chromium.org>
Tested-by: Doug Anderson <dianders@chromium.org>

-Doug
Mike Turquette Sept. 25, 2014, 9:49 p.m. UTC | #5
Quoting Heiko Stübner (2014-09-24 14:41:54)
> The npll on rk3288 is exactly the same pll type as the other 4. Yet it
> was missing the link to the rate table, making rate changes impossible.
> Change that by setting the table.
> 
> Signed-off-by: Heiko Stuebner <heiko@sntech.de>

Applied.

Thanks,
Mike

> ---
>  drivers/clk/rockchip/clk-rk3288.c | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
> index 8ea885b..938d30b 100644
> --- a/drivers/clk/rockchip/clk-rk3288.c
> +++ b/drivers/clk/rockchip/clk-rk3288.c
> @@ -143,7 +143,7 @@ static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = {
>         [gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12),
>                      RK3288_MODE_CON, 12, 8, rk3288_pll_rates),
>         [npll] = PLL(pll_rk3066, PLL_NPLL, "npll",  mux_pll_p, 0, RK3288_PLL_CON(16),
> -                    RK3288_MODE_CON, 14, 9, NULL),
> +                    RK3288_MODE_CON, 14, 9, rk3288_pll_rates),
>  };
>  
>  static struct clk_div_table div_hclk_cpu_t[] = {
> -- 
> 2.1.0
> 
>
diff mbox

Patch

diff --git a/drivers/clk/rockchip/clk-rk3288.c b/drivers/clk/rockchip/clk-rk3288.c
index 8ea885b..938d30b 100644
--- a/drivers/clk/rockchip/clk-rk3288.c
+++ b/drivers/clk/rockchip/clk-rk3288.c
@@ -143,7 +143,7 @@  static struct rockchip_pll_clock rk3288_pll_clks[] __initdata = {
 	[gpll] = PLL(pll_rk3066, PLL_GPLL, "gpll", mux_pll_p, 0, RK3288_PLL_CON(12),
 		     RK3288_MODE_CON, 12, 8, rk3288_pll_rates),
 	[npll] = PLL(pll_rk3066, PLL_NPLL, "npll",  mux_pll_p, 0, RK3288_PLL_CON(16),
-		     RK3288_MODE_CON, 14, 9, NULL),
+		     RK3288_MODE_CON, 14, 9, rk3288_pll_rates),
 };
 
 static struct clk_div_table div_hclk_cpu_t[] = {