diff mbox series

[v2,5/9] board: puma: Get bl31.bin via BL31 and rk3399m0.bin via PMUM0

Message ID 20190428090913.10568-6-jagan@amarulasolutions.com (mailing list archive)
State New, archived
Headers show
Series rk3399: make u-boot-rockchip-with-spl.bin | expand

Commit Message

Jagan Teki April 28, 2019, 9:09 a.m. UTC
Right now puma rk3399 board need to copy bl31-rk3399.bin and
rk3399m0.bin into u-boot source directory to make use of building
u-boot.itb.

So, add environment variable
- BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other
  platform BL31 env)
- PMUM0 for rk3399m0.bin

If the builds are not exporting BL31, PMUM0 env, the fit_spl_atf.sh will
notify with warning about which document to refer for more information
like this:

 WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
 Please read Building section in doc/README.rockchip
 WARNING: PMUM0 file rk3399m0.bin NOT found, resulting binary is non-functional
 Please read Building section in doc/README.rockchip

Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
---
 .../{fit_spl_atf.its => fit_spl_atf.sh}       | 46 ++++++++++++++++---
 configs/puma-rk3399_defconfig                 |  2 +-
 doc/README.rockchip                           |  8 ++--
 3 files changed, 45 insertions(+), 11 deletions(-)
 rename board/theobroma-systems/puma_rk3399/{fit_spl_atf.its => fit_spl_atf.sh} (50%)
 mode change 100644 => 100755

Comments

Kever Yang May 7, 2019, 5:01 a.m. UTC | #1
Hi Philipp and Klaus,

    Does this patch OK for your boards?

Thanks,
-Kever
On 04/28/2019 05:09 PM, Jagan Teki wrote:
> Right now puma rk3399 board need to copy bl31-rk3399.bin and
> rk3399m0.bin into u-boot source directory to make use of building
> u-boot.itb.
>
> So, add environment variable
> - BL31 for bl31.bin (instead of bl31-rk3399.bin to compatible with other
>   platform BL31 env)
> - PMUM0 for rk3399m0.bin
>
> If the builds are not exporting BL31, PMUM0 env, the fit_spl_atf.sh will
> notify with warning about which document to refer for more information
> like this:
>
>  WARNING: BL31 file bl31.bin NOT found, resulting binary is non-functional
>  Please read Building section in doc/README.rockchip
>  WARNING: PMUM0 file rk3399m0.bin NOT found, resulting binary is non-functional
>  Please read Building section in doc/README.rockchip
>
> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
> ---
>  .../{fit_spl_atf.its => fit_spl_atf.sh}       | 46 ++++++++++++++++---
>  configs/puma-rk3399_defconfig                 |  2 +-
>  doc/README.rockchip                           |  8 ++--
>  3 files changed, 45 insertions(+), 11 deletions(-)
>  rename board/theobroma-systems/puma_rk3399/{fit_spl_atf.its => fit_spl_atf.sh} (50%)
>  mode change 100644 => 100755
>
> diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
> old mode 100644
> new mode 100755
> similarity index 50%
> rename from board/theobroma-systems/puma_rk3399/fit_spl_atf.its
> rename to board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
> index 530f059f3d..517fad40a1
> --- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
> +++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
> @@ -1,3 +1,31 @@
> +#!/bin/sh
> +#
> +# Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
> +#
> +# Based on the board/sunxi/mksunxi_fit_atf.sh
> +#
> +# Script to generate FIT image source for 64-bit puma boards with
> +# U-Boot proper, ATF, PMU firmware and devicetree.
> +#
> +# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
> +
> +[ -z "$BL31" ] && BL31="bl31.bin"
> +
> +if [ ! -f $BL31 ]; then
> +	echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
> +	echo "Please read Building section in doc/README.rockchip" >&2
> +	BL31=/dev/null
> +fi
> +
> +[ -z "$PMUM0" ] && PMUM0="rk3399m0.bin"
> +
> +if [ ! -f $PMUM0 ]; then
> +	echo "WARNING: PMUM0 file $PMUM0 NOT found, resulting binary is non-functional" >&2
> +	echo "Please read Building section in doc/README.rockchip" >&2
> +	PMUM0=/dev/null
> +fi
> +
> +cat << __HEADER_EOF
>  /* SPDX-License-Identifier: GPL-2.0+ OR X11 */
>  /*
>   * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
> @@ -14,16 +42,15 @@
>  	images {
>  		uboot {
>  			description = "U-Boot (64-bit)";
> -			data = /incbin/("../../../u-boot-nodtb.bin");
> +			data = /incbin/("u-boot-nodtb.bin");
>  			type = "standalone";
> -			os = "U-Boot";
>  			arch = "arm64";
>  			compression = "none";
> -			load = <0x00200000>;
> +			load = <0x4a000000>;
>  		};
>  		atf {
>  			description = "ARM Trusted Firmware";
> -			data = /incbin/("../../../bl31-rk3399.bin");
> +			data = /incbin/("$BL31");
>  			type = "firmware";
>  			arch = "arm64";
>  			os = "arm-trusted-firmware";
> @@ -33,17 +60,20 @@
>  		};
>  		pmu {
>  		        description = "Cortex-M0 firmware";
> -			data = /incbin/("../../../rk3399m0.bin");
> +			data = /incbin/("$PMUM0");
>  			type = "pmu-firmware";
>  			compression = "none";
>  			load = <0x180000>;
>                  };
>  		fdt {
>  			description = "RK3399-Q7 (Puma) flat device-tree";
> -			data = /incbin/("../../../u-boot.dtb");
> +			data = /incbin/("u-boot.dtb");
>  			type = "flat_dt";
>  			compression = "none";
>  		};
> +__HEADER_EOF
> +
> +cat << __CONF_HEADER_EOF
>  	};
>  
>  	configurations {
> @@ -54,5 +84,9 @@
>  			loadables = "uboot", "pmu";
>  			fdt = "fdt";
>  		};
> +__CONF_HEADER_EOF
> +
> +cat << __ITS_EOF
>  	};
>  };
> +__ITS_EOF
> diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
> index e5ea2fe0b3..98b2dd6f02 100644
> --- a/configs/puma-rk3399_defconfig
> +++ b/configs/puma-rk3399_defconfig
> @@ -15,7 +15,7 @@ CONFIG_SPL_SPI_FLASH_SUPPORT=y
>  CONFIG_SPL_SPI_SUPPORT=y
>  CONFIG_DEBUG_UART=y
>  CONFIG_NR_DRAM_BANKS=1
> -CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
> +CONFIG_SPL_FIT_GENERATOR="board/theobroma-systems/puma_rk3399/fit_spl_atf.sh"
>  CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
>  CONFIG_MISC_INIT_R=y
>  # CONFIG_DISPLAY_CPUINFO is not set
> diff --git a/doc/README.rockchip b/doc/README.rockchip
> index 98a3824e2c..88a4593392 100644
> --- a/doc/README.rockchip
> +++ b/doc/README.rockchip
> @@ -137,8 +137,8 @@ For example:
>  	=> cd arm-trusted-firmware
>  	=> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
>  
> -	(copy bl31.bin into U-Boot root dir)
> -	=> cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin
> +	(export bl31.bin)
> +	=> export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.bin
>  
>       For rest of rk3399 boards.
>  
> @@ -162,8 +162,8 @@ For example:
>       (export cross compiler path for Cortex-M0 PMU)
>       => make CROSS_COMPILE=arm-cortex_m0-eabi-
>  
> -     (copy rk3399m0.bin into U-Boot root dir)
> -     => cp rk3399m0.bin /path/to/u-boot
> +     (export rk3399m0.bin)
> +     => export PMUM0=/path/to/rk3399-cortex-m0/rk3399m0.bin
>  
>     - Compile U-Boot
>
diff mbox series

Patch

diff --git a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
old mode 100644
new mode 100755
similarity index 50%
rename from board/theobroma-systems/puma_rk3399/fit_spl_atf.its
rename to board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
index 530f059f3d..517fad40a1
--- a/board/theobroma-systems/puma_rk3399/fit_spl_atf.its
+++ b/board/theobroma-systems/puma_rk3399/fit_spl_atf.sh
@@ -1,3 +1,31 @@ 
+#!/bin/sh
+#
+# Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com>
+#
+# Based on the board/sunxi/mksunxi_fit_atf.sh
+#
+# Script to generate FIT image source for 64-bit puma boards with
+# U-Boot proper, ATF, PMU firmware and devicetree.
+#
+# usage: $0 <dt_name> [<dt_name> [<dt_name] ...]
+
+[ -z "$BL31" ] && BL31="bl31.bin"
+
+if [ ! -f $BL31 ]; then
+	echo "WARNING: BL31 file $BL31 NOT found, resulting binary is non-functional" >&2
+	echo "Please read Building section in doc/README.rockchip" >&2
+	BL31=/dev/null
+fi
+
+[ -z "$PMUM0" ] && PMUM0="rk3399m0.bin"
+
+if [ ! -f $PMUM0 ]; then
+	echo "WARNING: PMUM0 file $PMUM0 NOT found, resulting binary is non-functional" >&2
+	echo "Please read Building section in doc/README.rockchip" >&2
+	PMUM0=/dev/null
+fi
+
+cat << __HEADER_EOF
 /* SPDX-License-Identifier: GPL-2.0+ OR X11 */
 /*
  * Copyright (C) 2017 Theobroma Systems Design und Consulting GmbH
@@ -14,16 +42,15 @@ 
 	images {
 		uboot {
 			description = "U-Boot (64-bit)";
-			data = /incbin/("../../../u-boot-nodtb.bin");
+			data = /incbin/("u-boot-nodtb.bin");
 			type = "standalone";
-			os = "U-Boot";
 			arch = "arm64";
 			compression = "none";
-			load = <0x00200000>;
+			load = <0x4a000000>;
 		};
 		atf {
 			description = "ARM Trusted Firmware";
-			data = /incbin/("../../../bl31-rk3399.bin");
+			data = /incbin/("$BL31");
 			type = "firmware";
 			arch = "arm64";
 			os = "arm-trusted-firmware";
@@ -33,17 +60,20 @@ 
 		};
 		pmu {
 		        description = "Cortex-M0 firmware";
-			data = /incbin/("../../../rk3399m0.bin");
+			data = /incbin/("$PMUM0");
 			type = "pmu-firmware";
 			compression = "none";
 			load = <0x180000>;
                 };
 		fdt {
 			description = "RK3399-Q7 (Puma) flat device-tree";
-			data = /incbin/("../../../u-boot.dtb");
+			data = /incbin/("u-boot.dtb");
 			type = "flat_dt";
 			compression = "none";
 		};
+__HEADER_EOF
+
+cat << __CONF_HEADER_EOF
 	};
 
 	configurations {
@@ -54,5 +84,9 @@ 
 			loadables = "uboot", "pmu";
 			fdt = "fdt";
 		};
+__CONF_HEADER_EOF
+
+cat << __ITS_EOF
 	};
 };
+__ITS_EOF
diff --git a/configs/puma-rk3399_defconfig b/configs/puma-rk3399_defconfig
index e5ea2fe0b3..98b2dd6f02 100644
--- a/configs/puma-rk3399_defconfig
+++ b/configs/puma-rk3399_defconfig
@@ -15,7 +15,7 @@  CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
 CONFIG_DEBUG_UART=y
 CONFIG_NR_DRAM_BANKS=1
-CONFIG_SPL_FIT_SOURCE="board/theobroma-systems/puma_rk3399/fit_spl_atf.its"
+CONFIG_SPL_FIT_GENERATOR="board/theobroma-systems/puma_rk3399/fit_spl_atf.sh"
 CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-puma-haikou.dtb"
 CONFIG_MISC_INIT_R=y
 # CONFIG_DISPLAY_CPUINFO is not set
diff --git a/doc/README.rockchip b/doc/README.rockchip
index 98a3824e2c..88a4593392 100644
--- a/doc/README.rockchip
+++ b/doc/README.rockchip
@@ -137,8 +137,8 @@  For example:
 	=> cd arm-trusted-firmware
 	=> make CROSS_COMPILE=aarch64-linux-gnu- PLAT=rk3399 bl31
 
-	(copy bl31.bin into U-Boot root dir)
-	=> cp build/rk3399/release/bl31/bl31.bin /path/to/u-boot/bl31-rk3399.bin
+	(export bl31.bin)
+	=> export BL31=/path/to/arm-trusted-firmware/build/rk3399/release/bl31/bl31.bin
 
      For rest of rk3399 boards.
 
@@ -162,8 +162,8 @@  For example:
      (export cross compiler path for Cortex-M0 PMU)
      => make CROSS_COMPILE=arm-cortex_m0-eabi-
 
-     (copy rk3399m0.bin into U-Boot root dir)
-     => cp rk3399m0.bin /path/to/u-boot
+     (export rk3399m0.bin)
+     => export PMUM0=/path/to/rk3399-cortex-m0/rk3399m0.bin
 
    - Compile U-Boot