| Message ID | 20190517102941.29145-2-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [v8,1/3] rockchip: rk3399: Add Nanopi NEO4 board support | expand |
On 05/29/2019 04:09 PM, Kever Yang wrote: > > On 05/17/2019 06:29 PM, Jagan Teki wrote: >> Add initial support for Rockpro64 board. >> >> Specification >> - Rockchip RK3399 >> - 2/4GB Dual-Channel LPDDR3 >> - SD card slot >> - eMMC socket >> - 128Mb SPI Flash >> - Gigabit ethernet >> - PCIe 4X slot >> - WiFI/BT module socket >> - HDMI In/Out, DP, MIPI DSI/CSI, eDP >> - USB 3.0, 2.0 >> - USB Type C power and data >> - GPIO expansion ports >> - DC 12V/2A >> >> Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2: >> "arm64: dts: rockchip: rockpro64 dts add usb regulator" >> (sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb) >> >> 'Akash' has sent an initial patch before, so I keep him as board >> maintainer and I'm co-maintainer based on our conversation. >> >> Signed-off-by: Akash Gajjar <akash@openedev.com> >> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Applied to u-boot-rockchip/master, thanks! > Thanks, > - Kever > >> --- >> Changes for v8: >> - Add TPL support >> - Now the bootchain is >> rkbin (TPL) -> SPL -> U-Boot proper >> >> arch/arm/dts/Makefile | 1 + >> arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 + >> arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++++++++++++++++ >> board/rockchip/evb_rk3399/MAINTAINERS | 7 + >> configs/rockpro64-rk3399_defconfig | 60 ++ >> 5 files changed, 786 insertions(+) >> create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi >> create mode 100644 arch/arm/dts/rk3399-rockpro64.dts >> create mode 100644 configs/rockpro64-rk3399_defconfig >> >> diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile >> index 529c506b4d..8522f01aca 100644 >> --- a/arch/arm/dts/Makefile >> +++ b/arch/arm/dts/Makefile >> @@ -114,6 +114,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ >> rk3399-puma-ddr1600.dtb \ >> rk3399-puma-ddr1866.dtb \ >> rk3399-rock960.dtb \ >> + rk3399-rockpro64.dtb >> >> dtb-$(CONFIG_ROCKCHIP_RV1108) += \ >> rv1108-elgin-r1.dtb \ >> diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi >> new file mode 100644 >> index 0000000000..7bddc3acdb >> --- /dev/null >> +++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi >> @@ -0,0 +1,6 @@ >> +// SPDX-License-Identifier: GPL-2.0+ >> +/* >> + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> >> + */ >> + >> +#include "rk3399-u-boot.dtsi" >> diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts >> new file mode 100644 >> index 0000000000..1f2394e058 >> --- /dev/null >> +++ b/arch/arm/dts/rk3399-rockpro64.dts >> @@ -0,0 +1,712 @@ >> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) >> +/* >> + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. >> + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> >> + */ >> + >> +/dts-v1/; >> +#include <dt-bindings/input/linux-event-codes.h> >> +#include <dt-bindings/pwm/pwm.h> >> +#include "rk3399.dtsi" >> +#include "rk3399-opp.dtsi" >> + >> +/ { >> + model = "Pine64 RockPro64"; >> + compatible = "pine64,rockpro64", "rockchip,rk3399"; >> + >> + chosen { >> + stdout-path = "serial2:1500000n8"; >> + }; >> + >> + clkin_gmac: external-gmac-clock { >> + compatible = "fixed-clock"; >> + clock-frequency = <125000000>; >> + clock-output-names = "clkin_gmac"; >> + #clock-cells = <0>; >> + }; >> + >> + gpio-keys { >> + compatible = "gpio-keys"; >> + autorepeat; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pwrbtn>; >> + >> + power { >> + debounce-interval = <100>; >> + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; >> + label = "GPIO Key Power"; >> + linux,code = <KEY_POWER>; >> + wakeup-source; >> + }; >> + }; >> + >> + leds { >> + compatible = "gpio-leds"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; >> + >> + work-led { >> + label = "work"; >> + default-state = "on"; >> + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; >> + }; >> + >> + diy-led { >> + label = "diy"; >> + default-state = "off"; >> + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; >> + }; >> + }; >> + >> + sdio_pwrseq: sdio-pwrseq { >> + compatible = "mmc-pwrseq-simple"; >> + clocks = <&rk808 1>; >> + clock-names = "ext_clock"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&wifi_enable_h>; >> + >> + /* >> + * On the module itself this is one of these (depending >> + * on the actual card populated): >> + * - SDIO_RESET_L_WL_REG_ON >> + * - PDN (power down when low) >> + */ >> + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; >> + }; >> + >> + vcc12v_dcin: vcc12v-dcin { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc12v_dcin"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <12000000>; >> + regulator-max-microvolt = <12000000>; >> + }; >> + >> + /* switched by pmic_sleep */ >> + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc1v8_s3"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + vin-supply = <&vcc_1v8>; >> + }; >> + >> + vcc3v3_pcie: vcc3v3-pcie-regulator { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pcie_pwr_en>; >> + regulator-name = "vcc3v3_pcie"; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> + >> + vcc3v3_sys: vcc3v3-sys { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc3v3_sys"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3300000>; >> + regulator-max-microvolt = <3300000>; >> + vin-supply = <&vcc5v0_sys>; >> + }; >> + >> + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ >> + vcc5v0_host: vcc5v0-host-regulator { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vcc5v0_host_en>; >> + regulator-name = "vcc5v0_host"; >> + regulator-always-on; >> + vin-supply = <&vcc5v0_usb>; >> + }; >> + >> + vcc5v0_typec: vcc5v0-typec-regulator { >> + compatible = "regulator-fixed"; >> + enable-active-high; >> + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vcc5v0_typec_en>; >> + regulator-name = "vcc5v0_typec"; >> + regulator-always-on; >> + vin-supply = <&vcc5v0_usb>; >> + }; >> + >> + vcc5v0_sys: vcc5v0-sys { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc5v0_sys"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> + >> + vcc5v0_usb: vcc5v0-usb { >> + compatible = "regulator-fixed"; >> + regulator-name = "vcc5v0_usb"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <5000000>; >> + regulator-max-microvolt = <5000000>; >> + vin-supply = <&vcc12v_dcin>; >> + }; >> + >> + vdd_log: vdd-log { >> + compatible = "pwm-regulator"; >> + pwms = <&pwm2 0 25000 1>; >> + regulator-name = "vdd_log"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <800000>; >> + regulator-max-microvolt = <1400000>; >> + vin-supply = <&vcc5v0_sys>; >> + }; >> +}; >> + >> +&cpu_l0 { >> + cpu-supply = <&vdd_cpu_l>; >> +}; >> + >> +&cpu_l1 { >> + cpu-supply = <&vdd_cpu_l>; >> +}; >> + >> +&cpu_l2 { >> + cpu-supply = <&vdd_cpu_l>; >> +}; >> + >> +&cpu_l3 { >> + cpu-supply = <&vdd_cpu_l>; >> +}; >> + >> +&cpu_b0 { >> + cpu-supply = <&vdd_cpu_b>; >> +}; >> + >> +&cpu_b1 { >> + cpu-supply = <&vdd_cpu_b>; >> +}; >> + >> +&emmc_phy { >> + status = "okay"; >> +}; >> + >> +&gmac { >> + assigned-clocks = <&cru SCLK_RMII_SRC>; >> + assigned-clock-parents = <&clkin_gmac>; >> + clock_in_out = "input"; >> + phy-supply = <&vcc_lan>; >> + phy-mode = "rgmii"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&rgmii_pins>; >> + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; >> + snps,reset-active-low; >> + snps,reset-delays-us = <0 10000 50000>; >> + tx_delay = <0x28>; >> + rx_delay = <0x11>; >> + status = "okay"; >> +}; >> + >> +&hdmi { >> + ddc-i2c-bus = <&i2c3>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&hdmi_cec>; >> + status = "okay"; >> +}; >> + >> +&gpu { >> + mali-supply = <&vdd_gpu>; >> + status = "okay"; >> +}; >> + >> +&i2c0 { >> + clock-frequency = <400000>; >> + i2c-scl-rising-time-ns = <168>; >> + i2c-scl-falling-time-ns = <4>; >> + status = "okay"; >> + >> + rk808: pmic@1b { >> + compatible = "rockchip,rk808"; >> + reg = <0x1b>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; >> + #clock-cells = <1>; >> + clock-output-names = "xin32k", "rk808-clkout2"; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&pmic_int_l>; >> + rockchip,system-power-controller; >> + wakeup-source; >> + >> + vcc1-supply = <&vcc5v0_sys>; >> + vcc2-supply = <&vcc5v0_sys>; >> + vcc3-supply = <&vcc5v0_sys>; >> + vcc4-supply = <&vcc5v0_sys>; >> + vcc6-supply = <&vcc5v0_sys>; >> + vcc7-supply = <&vcc5v0_sys>; >> + vcc8-supply = <&vcc3v3_sys>; >> + vcc9-supply = <&vcc5v0_sys>; >> + vcc10-supply = <&vcc5v0_sys>; >> + vcc11-supply = <&vcc5v0_sys>; >> + vcc12-supply = <&vcc3v3_sys>; >> + vddio-supply = <&vcca_1v8>; >> + >> + regulators { >> + vdd_center: DCDC_REG1 { >> + regulator-name = "vdd_center"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <750000>; >> + regulator-max-microvolt = <1350000>; >> + regulator-ramp-delay = <6001>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_cpu_l: DCDC_REG2 { >> + regulator-name = "vdd_cpu_l"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <750000>; >> + regulator-max-microvolt = <1350000>; >> + regulator-ramp-delay = <6001>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_ddr: DCDC_REG3 { >> + regulator-name = "vcc_ddr"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + }; >> + }; >> + >> + vcc_1v8: DCDC_REG4 { >> + regulator-name = "vcc_1v8"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1800000>; >> + }; >> + }; >> + >> + vcc1v8_dvp: LDO_REG1 { >> + regulator-name = "vcc1v8_dvp"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc3v0_touch: LDO_REG2 { >> + regulator-name = "vcc3v0_touch"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcca_1v8: LDO_REG3 { >> + regulator-name = "vcca_1v8"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1800000>; >> + }; >> + }; >> + >> + vcc_sdio: LDO_REG4 { >> + regulator-name = "vcc_sdio"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <3000000>; >> + }; >> + }; >> + >> + vcca3v0_codec: LDO_REG5 { >> + regulator-name = "vcca3v0_codec"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_1v5: LDO_REG6 { >> + regulator-name = "vcc_1v5"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1500000>; >> + regulator-max-microvolt = <1500000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <1500000>; >> + }; >> + }; >> + >> + vcca1v8_codec: LDO_REG7 { >> + regulator-name = "vcca1v8_codec"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <1800000>; >> + regulator-max-microvolt = <1800000>; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc_3v0: LDO_REG8 { >> + regulator-name = "vcc_3v0"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-min-microvolt = <3000000>; >> + regulator-max-microvolt = <3000000>; >> + regulator-state-mem { >> + regulator-on-in-suspend; >> + regulator-suspend-microvolt = <3000000>; >> + }; >> + }; >> + >> + vcc3v3_s3: vcc_lan: SWITCH_REG1 { >> + regulator-name = "vcc3v3_s3"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vcc3v3_s0: SWITCH_REG2 { >> + regulator-name = "vcc3v3_s0"; >> + regulator-always-on; >> + regulator-boot-on; >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + }; >> + }; >> + >> + vdd_cpu_b: regulator@40 { >> + compatible = "silergy,syr827"; >> + reg = <0x40>; >> + fcs,suspend-voltage-selector = <1>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vsel1_gpio>; >> + regulator-name = "vdd_cpu_b"; >> + regulator-min-microvolt = <712500>; >> + regulator-max-microvolt = <1500000>; >> + regulator-ramp-delay = <1000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc5v0_sys>; >> + >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> + >> + vdd_gpu: regulator@41 { >> + compatible = "silergy,syr828"; >> + reg = <0x41>; >> + fcs,suspend-voltage-selector = <1>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&vsel2_gpio>; >> + regulator-name = "vdd_gpu"; >> + regulator-min-microvolt = <712500>; >> + regulator-max-microvolt = <1500000>; >> + regulator-ramp-delay = <1000>; >> + regulator-always-on; >> + regulator-boot-on; >> + vin-supply = <&vcc5v0_sys>; >> + >> + regulator-state-mem { >> + regulator-off-in-suspend; >> + }; >> + }; >> +}; >> + >> +&i2c1 { >> + i2c-scl-rising-time-ns = <300>; >> + i2c-scl-falling-time-ns = <15>; >> + status = "okay"; >> +}; >> + >> +&i2c3 { >> + i2c-scl-rising-time-ns = <450>; >> + i2c-scl-falling-time-ns = <15>; >> + status = "okay"; >> +}; >> + >> +&i2c4 { >> + i2c-scl-rising-time-ns = <600>; >> + i2c-scl-falling-time-ns = <20>; >> + status = "okay"; >> + >> + fusb0: typec-portc@22 { >> + compatible = "fcs,fusb302"; >> + reg = <0x22>; >> + interrupt-parent = <&gpio1>; >> + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&fusb0_int>; >> + vbus-supply = <&vcc5v0_typec>; >> + status = "okay"; >> + }; >> +}; >> + >> +&i2s0 { >> + rockchip,playback-channels = <8>; >> + rockchip,capture-channels = <8>; >> + status = "okay"; >> +}; >> + >> +&i2s1 { >> + rockchip,playback-channels = <2>; >> + rockchip,capture-channels = <2>; >> + status = "okay"; >> +}; >> + >> +&i2s2 { >> + status = "okay"; >> +}; >> + >> +&io_domains { >> + status = "okay"; >> + >> + bt656-supply = <&vcc1v8_dvp>; >> + audio-supply = <&vcca1v8_codec>; >> + sdmmc-supply = <&vcc_sdio>; >> + gpio1830-supply = <&vcc_3v0>; >> +}; >> + >> +&pmu_io_domains { >> + pmu1830-supply = <&vcc_3v0>; >> + status = "okay"; >> +}; >> + >> +&pinctrl { >> + buttons { >> + pwrbtn: pwrbtn { >> + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + }; >> + >> + fusb302x { >> + fusb0_int: fusb0-int { >> + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + }; >> + >> + leds { >> + work_led_gpio: work_led-gpio { >> + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + >> + diy_led_gpio: diy_led-gpio { >> + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + pcie { >> + pcie_pwr_en: pcie-pwr-en { >> + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + pmic { >> + pmic_int_l: pmic-int-l { >> + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + >> + vsel1_gpio: vsel1-gpio { >> + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; >> + }; >> + >> + vsel2_gpio: vsel2-gpio { >> + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; >> + }; >> + }; >> + >> + sdio-pwrseq { >> + wifi_enable_h: wifi-enable-h { >> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> + >> + usb-typec { >> + vcc5v0_typec_en: vcc5v0_typec_en { >> + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; >> + }; >> + }; >> + >> + usb2 { >> + vcc5v0_host_en: vcc5v0-host-en { >> + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; >> + }; >> + }; >> +}; >> + >> +&pwm0 { >> + status = "okay"; >> +}; >> + >> +&pwm2 { >> + status = "okay"; >> +}; >> + >> +&saradc { >> + vref-supply = <&vcca1v8_s3>; >> + status = "okay"; >> +}; >> + >> +&sdmmc { >> + bus-width = <4>; >> + cap-mmc-highspeed; >> + cap-sd-highspeed; >> + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; >> + disable-wp; >> + max-frequency = <150000000>; >> + pinctrl-names = "default"; >> + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; >> + status = "okay"; >> +}; >> + >> +&sdhci { >> + bus-width = <8>; >> + mmc-hs400-1_8v; >> + mmc-hs400-enhanced-strobe; >> + non-removable; >> + status = "okay"; >> +}; >> + >> +&tcphy0 { >> + status = "okay"; >> +}; >> + >> +&tcphy1 { >> + status = "okay"; >> +}; >> + >> +&tsadc { >> + /* tshut mode 0:CRU 1:GPIO */ >> + rockchip,hw-tshut-mode = <1>; >> + /* tshut polarity 0:LOW 1:HIGH */ >> + rockchip,hw-tshut-polarity = <1>; >> + status = "okay"; >> +}; >> + >> +&u2phy0 { >> + status = "okay"; >> + >> + u2phy0_otg: otg-port { >> + status = "okay"; >> + }; >> + >> + u2phy0_host: host-port { >> + phy-supply = <&vcc5v0_host>; >> + status = "okay"; >> + }; >> +}; >> + >> +&u2phy1 { >> + status = "okay"; >> + >> + u2phy1_otg: otg-port { >> + status = "okay"; >> + }; >> + >> + u2phy1_host: host-port { >> + phy-supply = <&vcc5v0_host>; >> + status = "okay"; >> + }; >> +}; >> + >> +&uart0 { >> + pinctrl-names = "default"; >> + pinctrl-0 = <&uart0_xfer &uart0_cts>; >> + status = "okay"; >> +}; >> + >> +&uart2 { >> + status = "okay"; >> +}; >> + >> +&usb_host0_ehci { >> + status = "okay"; >> +}; >> + >> +&usb_host0_ohci { >> + status = "okay"; >> +}; >> + >> +&usb_host1_ehci { >> + status = "okay"; >> +}; >> + >> +&usb_host1_ohci { >> + status = "okay"; >> +}; >> + >> +&usbdrd3_0 { >> + status = "okay"; >> +}; >> + >> +&usbdrd_dwc3_0 { >> + status = "okay"; >> + dr_mode = "otg"; >> +}; >> + >> +&usbdrd3_1 { >> + status = "okay"; >> +}; >> + >> +&usbdrd_dwc3_1 { >> + status = "okay"; >> + dr_mode = "host"; >> +}; >> + >> +&vopb { >> + status = "okay"; >> +}; >> + >> +&vopb_mmu { >> + status = "okay"; >> +}; >> + >> +&vopl { >> + status = "okay"; >> +}; >> + >> +&vopl_mmu { >> + status = "okay"; >> +}; >> diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS >> index 1f51f65160..295730c91b 100644 >> --- a/board/rockchip/evb_rk3399/MAINTAINERS >> +++ b/board/rockchip/evb_rk3399/MAINTAINERS >> @@ -30,3 +30,10 @@ S: Maintained >> F: configs/orangepi-rk3399_defconfig >> F: arch/arm/dts/rk3399-u-boot.dtsi >> F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi >> + >> +ROCKPRO64 >> +M: Akash Gajjar <akash@openedev.com> >> +M: Jagan Teki <jagan@amarulasolutions.com> >> +S: Maintained >> +F: configs/rockpro64-rk3399_defconfig >> +F: arch/arm/dts/rk3399-rockpro64-u-boot.dtsi >> diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig >> new file mode 100644 >> index 0000000000..90bcaedbd2 >> --- /dev/null >> +++ b/configs/rockpro64-rk3399_defconfig >> @@ -0,0 +1,60 @@ >> +CONFIG_ARM=y >> +CONFIG_ARCH_ROCKCHIP=y >> +CONFIG_SYS_TEXT_BASE=0x00200000 >> +CONFIG_SPL_LIBCOMMON_SUPPORT=y >> +CONFIG_SPL_LIBGENERIC_SUPPORT=y >> +CONFIG_SYS_MALLOC_F_LEN=0x4000 >> +CONFIG_ROCKCHIP_RK3399=y >> +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 >> +CONFIG_DEBUG_UART_BASE=0xFF1A0000 >> +CONFIG_DEBUG_UART_CLOCK=24000000 >> +CONFIG_SPL_STACK_R_ADDR=0x80000 >> +CONFIG_DEBUG_UART=y >> +CONFIG_NR_DRAM_BANKS=1 >> +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" >> +# CONFIG_DISPLAY_CPUINFO is not set >> +CONFIG_DISPLAY_BOARDINFO_LATE=y >> +CONFIG_SPL_STACK_R=y >> +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 >> +CONFIG_CMD_BOOTZ=y >> +CONFIG_CMD_GPT=y >> +CONFIG_CMD_MMC=y >> +CONFIG_CMD_SF=y >> +CONFIG_CMD_USB=y >> +# CONFIG_CMD_SETEXPR is not set >> +CONFIG_CMD_TIME=y >> +CONFIG_SPL_OF_CONTROL=y >> +CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64" >> +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" >> +CONFIG_TPL=y >> +CONFIG_ENV_IS_IN_MMC=y >> +CONFIG_ROCKCHIP_GPIO=y >> +CONFIG_SYS_I2C_ROCKCHIP=y >> +CONFIG_MMC_DW=y >> +CONFIG_MMC_DW_ROCKCHIP=y >> +CONFIG_MMC_SDHCI=y >> +CONFIG_MMC_SDHCI_ROCKCHIP=y >> +CONFIG_DM_ETH=y >> +CONFIG_ETH_DESIGNWARE=y >> +CONFIG_GMAC_ROCKCHIP=y >> +CONFIG_PMIC_RK8XX=y >> +CONFIG_REGULATOR_PWM=y >> +CONFIG_REGULATOR_RK8XX=y >> +CONFIG_PWM_ROCKCHIP=y >> +CONFIG_BAUDRATE=1500000 >> +CONFIG_DEBUG_UART_SHIFT=2 >> +CONFIG_SYSRESET=y >> +CONFIG_USB=y >> +CONFIG_USB_XHCI_HCD=y >> +CONFIG_USB_XHCI_DWC3=y >> +CONFIG_USB_EHCI_HCD=y >> +CONFIG_USB_EHCI_GENERIC=y >> +CONFIG_USB_HOST_ETHER=y >> +CONFIG_USB_ETHER_ASIX=y >> +CONFIG_USB_ETHER_ASIX88179=y >> +CONFIG_USB_ETHER_MCS7830=y >> +CONFIG_USB_ETHER_RTL8152=y >> +CONFIG_USB_ETHER_SMSC95XX=y >> +CONFIG_USE_TINY_PRINTF=y >> +CONFIG_SPL_TINY_MEMSET=y >> +CONFIG_ERRNO_STR=y > _______________________________________________ > U-Boot mailing list > U-Boot@lists.denx.de > https://lists.denx.de/listinfo/u-boot
Hi, On Sat, 2019-06-01 at 10:41 +0800, Kever Yang wrote: > > On 05/29/2019 04:09 PM, Kever Yang wrote: > > On 05/17/2019 06:29 PM, Jagan Teki wrote: > > > Add initial support for Rockpro64 board. > > > > > > Specification > > > - Rockchip RK3399 > > > - 2/4GB Dual-Channel LPDDR3 > > > - SD card slot > > > - eMMC socket > > > - 128Mb SPI Flash > > > - Gigabit ethernet > > > - PCIe 4X slot > > > - WiFI/BT module socket > > > - HDMI In/Out, DP, MIPI DSI/CSI, eDP > > > - USB 3.0, 2.0 > > > - USB Type C power and data > > > - GPIO expansion ports > > > - DC 12V/2A > > > > > > Commit details of rk3399-rockpro64.dts sync from Linux 5.1-rc2: > > > "arm64: dts: rockchip: rockpro64 dts add usb regulator" > > > (sha1: 6db644c79c8d45d73b56bc389aebd85fc3679beb) > > > > > > 'Akash' has sent an initial patch before, so I keep him as board > > > maintainer and I'm co-maintainer based on our conversation. > > > > > > Signed-off-by: Akash Gajjar <akash@openedev.com> > > > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> > > Reviewed-by: Kever Yang <kever.yang@rock-chips.com> > > Applied to u-boot-rockchip/master, thanks! I'm very surprised to read this. Is SPL support part of this version or was it disabled? I thought there was an agreement to not merge the patches until the SPL issue is resolved. Can you explain what happened? Cheers, Paul > > Thanks, > > - Kever > > > > > --- > > > Changes for v8: > > > - Add TPL support > > > - Now the bootchain is > > > rkbin (TPL) -> SPL -> U-Boot proper > > > > > > arch/arm/dts/Makefile | 1 + > > > arch/arm/dts/rk3399-rockpro64-u-boot.dtsi | 6 + > > > arch/arm/dts/rk3399-rockpro64.dts | 712 ++++++++++++++++++++++ > > > board/rockchip/evb_rk3399/MAINTAINERS | 7 + > > > configs/rockpro64-rk3399_defconfig | 60 ++ > > > 5 files changed, 786 insertions(+) > > > create mode 100644 arch/arm/dts/rk3399-rockpro64-u-boot.dtsi > > > create mode 100644 arch/arm/dts/rk3399-rockpro64.dts > > > create mode 100644 configs/rockpro64-rk3399_defconfig > > > > > > diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile > > > index 529c506b4d..8522f01aca 100644 > > > --- a/arch/arm/dts/Makefile > > > +++ b/arch/arm/dts/Makefile > > > @@ -114,6 +114,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ > > > rk3399-puma-ddr1600.dtb \ > > > rk3399-puma-ddr1866.dtb \ > > > rk3399-rock960.dtb \ > > > + rk3399-rockpro64.dtb > > > > > > dtb-$(CONFIG_ROCKCHIP_RV1108) += \ > > > rv1108-elgin-r1.dtb \ > > > diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi > > > new file mode 100644 > > > index 0000000000..7bddc3acdb > > > --- /dev/null > > > +++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi > > > @@ -0,0 +1,6 @@ > > > +// SPDX-License-Identifier: GPL-2.0+ > > > +/* > > > + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> > > > + */ > > > + > > > +#include "rk3399-u-boot.dtsi" > > > diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts > > > new file mode 100644 > > > index 0000000000..1f2394e058 > > > --- /dev/null > > > +++ b/arch/arm/dts/rk3399-rockpro64.dts > > > @@ -0,0 +1,712 @@ > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > +/* > > > + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. > > > + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> > > > + */ > > > + > > > +/dts-v1/; > > > +#include <dt-bindings/input/linux-event-codes.h> > > > +#include <dt-bindings/pwm/pwm.h> > > > +#include "rk3399.dtsi" > > > +#include "rk3399-opp.dtsi" > > > + > > > +/ { > > > + model = "Pine64 RockPro64"; > > > + compatible = "pine64,rockpro64", "rockchip,rk3399"; > > > + > > > + chosen { > > > + stdout-path = "serial2:1500000n8"; > > > + }; > > > + > > > + clkin_gmac: external-gmac-clock { > > > + compatible = "fixed-clock"; > > > + clock-frequency = <125000000>; > > > + clock-output-names = "clkin_gmac"; > > > + #clock-cells = <0>; > > > + }; > > > + > > > + gpio-keys { > > > + compatible = "gpio-keys"; > > > + autorepeat; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pwrbtn>; > > > + > > > + power { > > > + debounce-interval = <100>; > > > + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; > > > + label = "GPIO Key Power"; > > > + linux,code = <KEY_POWER>; > > > + wakeup-source; > > > + }; > > > + }; > > > + > > > + leds { > > > + compatible = "gpio-leds"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; > > > + > > > + work-led { > > > + label = "work"; > > > + default-state = "on"; > > > + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; > > > + }; > > > + > > > + diy-led { > > > + label = "diy"; > > > + default-state = "off"; > > > + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; > > > + }; > > > + }; > > > + > > > + sdio_pwrseq: sdio-pwrseq { > > > + compatible = "mmc-pwrseq-simple"; > > > + clocks = <&rk808 1>; > > > + clock-names = "ext_clock"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&wifi_enable_h>; > > > + > > > + /* > > > + * On the module itself this is one of these (depending > > > + * on the actual card populated): > > > + * - SDIO_RESET_L_WL_REG_ON > > > + * - PDN (power down when low) > > > + */ > > > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > > > + }; > > > + > > > + vcc12v_dcin: vcc12v-dcin { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc12v_dcin"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <12000000>; > > > + regulator-max-microvolt = <12000000>; > > > + }; > > > + > > > + /* switched by pmic_sleep */ > > > + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc1v8_s3"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + vin-supply = <&vcc_1v8>; > > > + }; > > > + > > > + vcc3v3_pcie: vcc3v3-pcie-regulator { > > > + compatible = "regulator-fixed"; > > > + enable-active-high; > > > + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pcie_pwr_en>; > > > + regulator-name = "vcc3v3_pcie"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + vin-supply = <&vcc12v_dcin>; > > > + }; > > > + > > > + vcc3v3_sys: vcc3v3-sys { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc3v3_sys"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + vin-supply = <&vcc5v0_sys>; > > > + }; > > > + > > > + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ > > > + vcc5v0_host: vcc5v0-host-regulator { > > > + compatible = "regulator-fixed"; > > > + enable-active-high; > > > + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&vcc5v0_host_en>; > > > + regulator-name = "vcc5v0_host"; > > > + regulator-always-on; > > > + vin-supply = <&vcc5v0_usb>; > > > + }; > > > + > > > + vcc5v0_typec: vcc5v0-typec-regulator { > > > + compatible = "regulator-fixed"; > > > + enable-active-high; > > > + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&vcc5v0_typec_en>; > > > + regulator-name = "vcc5v0_typec"; > > > + regulator-always-on; > > > + vin-supply = <&vcc5v0_usb>; > > > + }; > > > + > > > + vcc5v0_sys: vcc5v0-sys { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc5v0_sys"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <5000000>; > > > + regulator-max-microvolt = <5000000>; > > > + vin-supply = <&vcc12v_dcin>; > > > + }; > > > + > > > + vcc5v0_usb: vcc5v0-usb { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc5v0_usb"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <5000000>; > > > + regulator-max-microvolt = <5000000>; > > > + vin-supply = <&vcc12v_dcin>; > > > + }; > > > + > > > + vdd_log: vdd-log { > > > + compatible = "pwm-regulator"; > > > + pwms = <&pwm2 0 25000 1>; > > > + regulator-name = "vdd_log"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <800000>; > > > + regulator-max-microvolt = <1400000>; > > > + vin-supply = <&vcc5v0_sys>; > > > + }; > > > +}; > > > + > > > +&cpu_l0 { > > > + cpu-supply = <&vdd_cpu_l>; > > > +}; > > > + > > > +&cpu_l1 { > > > + cpu-supply = <&vdd_cpu_l>; > > > +}; > > > + > > > +&cpu_l2 { > > > + cpu-supply = <&vdd_cpu_l>; > > > +}; > > > + > > > +&cpu_l3 { > > > + cpu-supply = <&vdd_cpu_l>; > > > +}; > > > + > > > +&cpu_b0 { > > > + cpu-supply = <&vdd_cpu_b>; > > > +}; > > > + > > > +&cpu_b1 { > > > + cpu-supply = <&vdd_cpu_b>; > > > +}; > > > + > > > +&emmc_phy { > > > + status = "okay"; > > > +}; > > > + > > > +&gmac { > > > + assigned-clocks = <&cru SCLK_RMII_SRC>; > > > + assigned-clock-parents = <&clkin_gmac>; > > > + clock_in_out = "input"; > > > + phy-supply = <&vcc_lan>; > > > + phy-mode = "rgmii"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&rgmii_pins>; > > > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > > > + snps,reset-active-low; > > > + snps,reset-delays-us = <0 10000 50000>; > > > + tx_delay = <0x28>; > > > + rx_delay = <0x11>; > > > + status = "okay"; > > > +}; > > > + > > > +&hdmi { > > > + ddc-i2c-bus = <&i2c3>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&hdmi_cec>; > > > + status = "okay"; > > > +}; > > > + > > > +&gpu { > > > + mali-supply = <&vdd_gpu>; > > > + status = "okay"; > > > +}; > > > + > > > +&i2c0 { > > > + clock-frequency = <400000>; > > > + i2c-scl-rising-time-ns = <168>; > > > + i2c-scl-falling-time-ns = <4>; > > > + status = "okay"; > > > + > > > + rk808: pmic@1b { > > > + compatible = "rockchip,rk808"; > > > + reg = <0x1b>; > > > + interrupt-parent = <&gpio1>; > > > + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; > > > + #clock-cells = <1>; > > > + clock-output-names = "xin32k", "rk808-clkout2"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pmic_int_l>; > > > + rockchip,system-power-controller; > > > + wakeup-source; > > > + > > > + vcc1-supply = <&vcc5v0_sys>; > > > + vcc2-supply = <&vcc5v0_sys>; > > > + vcc3-supply = <&vcc5v0_sys>; > > > + vcc4-supply = <&vcc5v0_sys>; > > > + vcc6-supply = <&vcc5v0_sys>; > > > + vcc7-supply = <&vcc5v0_sys>; > > > + vcc8-supply = <&vcc3v3_sys>; > > > + vcc9-supply = <&vcc5v0_sys>; > > > + vcc10-supply = <&vcc5v0_sys>; > > > + vcc11-supply = <&vcc5v0_sys>; > > > + vcc12-supply = <&vcc3v3_sys>; > > > + vddio-supply = <&vcca_1v8>; > > > + > > > + regulators { > > > + vdd_center: DCDC_REG1 { > > > + regulator-name = "vdd_center"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <750000>; > > > + regulator-max-microvolt = <1350000>; > > > + regulator-ramp-delay = <6001>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vdd_cpu_l: DCDC_REG2 { > > > + regulator-name = "vdd_cpu_l"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <750000>; > > > + regulator-max-microvolt = <1350000>; > > > + regulator-ramp-delay = <6001>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc_ddr: DCDC_REG3 { > > > + regulator-name = "vcc_ddr"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc_1v8: DCDC_REG4 { > > > + regulator-name = "vcc_1v8"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = <1800000>; > > > + }; > > > + }; > > > + > > > + vcc1v8_dvp: LDO_REG1 { > > > + regulator-name = "vcc1v8_dvp"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc3v0_touch: LDO_REG2 { > > > + regulator-name = "vcc3v0_touch"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3000000>; > > > + regulator-max-microvolt = <3000000>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcca_1v8: LDO_REG3 { > > > + regulator-name = "vcca_1v8"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = <1800000>; > > > + }; > > > + }; > > > + > > > + vcc_sdio: LDO_REG4 { > > > + regulator-name = "vcc_sdio"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <3000000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = <3000000>; > > > + }; > > > + }; > > > + > > > + vcca3v0_codec: LDO_REG5 { > > > + regulator-name = "vcca3v0_codec"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3000000>; > > > + regulator-max-microvolt = <3000000>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc_1v5: LDO_REG6 { > > > + regulator-name = "vcc_1v5"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1500000>; > > > + regulator-max-microvolt = <1500000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = <1500000>; > > > + }; > > > + }; > > > + > > > + vcca1v8_codec: LDO_REG7 { > > > + regulator-name = "vcca1v8_codec"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc_3v0: LDO_REG8 { > > > + regulator-name = "vcc_3v0"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3000000>; > > > + regulator-max-microvolt = <3000000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = <3000000>; > > > + }; > > > + }; > > > + > > > + vcc3v3_s3: vcc_lan: SWITCH_REG1 { > > > + regulator-name = "vcc3v3_s3"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc3v3_s0: SWITCH_REG2 { > > > + regulator-name = "vcc3v3_s0"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + }; > > > + }; > > > + > > > + vdd_cpu_b: regulator@40 { > > > + compatible = "silergy,syr827"; > > > + reg = <0x40>; > > > + fcs,suspend-voltage-selector = <1>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&vsel1_gpio>; > > > + regulator-name = "vdd_cpu_b"; > > > + regulator-min-microvolt = <712500>; > > > + regulator-max-microvolt = <1500000>; > > > + regulator-ramp-delay = <1000>; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + vin-supply = <&vcc5v0_sys>; > > > + > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vdd_gpu: regulator@41 { > > > + compatible = "silergy,syr828"; > > > + reg = <0x41>; > > > + fcs,suspend-voltage-selector = <1>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&vsel2_gpio>; > > > + regulator-name = "vdd_gpu"; > > > + regulator-min-microvolt = <712500>; > > > + regulator-max-microvolt = <1500000>; > > > + regulator-ramp-delay = <1000>; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + vin-supply = <&vcc5v0_sys>; > > > + > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > +}; > > > + > > > +&i2c1 { > > > + i2c-scl-rising-time-ns = <300>; > > > + i2c-scl-falling-time-ns = <15>; > > > + status = "okay"; > > > +}; > > > + > > > +&i2c3 { > > > + i2c-scl-rising-time-ns = <450>; > > > + i2c-scl-falling-time-ns = <15>; > > > + status = "okay"; > > > +}; > > > + > > > +&i2c4 { > > > + i2c-scl-rising-time-ns = <600>; > > > + i2c-scl-falling-time-ns = <20>; > > > + status = "okay"; > > > + > > > + fusb0: typec-portc@22 { > > > + compatible = "fcs,fusb302"; > > > + reg = <0x22>; > > > + interrupt-parent = <&gpio1>; > > > + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&fusb0_int>; > > > + vbus-supply = <&vcc5v0_typec>; > > > + status = "okay"; > > > + }; > > > +}; > > > + > > > +&i2s0 { > > > + rockchip,playback-channels = <8>; > > > + rockchip,capture-channels = <8>; > > > + status = "okay"; > > > +}; > > > + > > > +&i2s1 { > > > + rockchip,playback-channels = <2>; > > > + rockchip,capture-channels = <2>; > > > + status = "okay"; > > > +}; > > > + > > > +&i2s2 { > > > + status = "okay"; > > > +}; > > > + > > > +&io_domains { > > > + status = "okay"; > > > + > > > + bt656-supply = <&vcc1v8_dvp>; > > > + audio-supply = <&vcca1v8_codec>; > > > + sdmmc-supply = <&vcc_sdio>; > > > + gpio1830-supply = <&vcc_3v0>; > > > +}; > > > + > > > +&pmu_io_domains { > > > + pmu1830-supply = <&vcc_3v0>; > > > + status = "okay"; > > > +}; > > > + > > > +&pinctrl { > > > + buttons { > > > + pwrbtn: pwrbtn { > > > + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; > > > + }; > > > + }; > > > + > > > + fusb302x { > > > + fusb0_int: fusb0-int { > > > + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; > > > + }; > > > + }; > > > + > > > + leds { > > > + work_led_gpio: work_led-gpio { > > > + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > > > + }; > > > + > > > + diy_led_gpio: diy_led-gpio { > > > + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; > > > + }; > > > + }; > > > + > > > + pcie { > > > + pcie_pwr_en: pcie-pwr-en { > > > + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; > > > + }; > > > + }; > > > + > > > + pmic { > > > + pmic_int_l: pmic-int-l { > > > + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; > > > + }; > > > + > > > + vsel1_gpio: vsel1-gpio { > > > + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; > > > + }; > > > + > > > + vsel2_gpio: vsel2-gpio { > > > + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; > > > + }; > > > + }; > > > + > > > + sdio-pwrseq { > > > + wifi_enable_h: wifi-enable-h { > > > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; > > > + }; > > > + }; > > > + > > > + usb-typec { > > > + vcc5v0_typec_en: vcc5v0_typec_en { > > > + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; > > > + }; > > > + }; > > > + > > > + usb2 { > > > + vcc5v0_host_en: vcc5v0-host-en { > > > + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; > > > + }; > > > + }; > > > +}; > > > + > > > +&pwm0 { > > > + status = "okay"; > > > +}; > > > + > > > +&pwm2 { > > > + status = "okay"; > > > +}; > > > + > > > +&saradc { > > > + vref-supply = <&vcca1v8_s3>; > > > + status = "okay"; > > > +}; > > > + > > > +&sdmmc { > > > + bus-width = <4>; > > > + cap-mmc-highspeed; > > > + cap-sd-highspeed; > > > + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; > > > + disable-wp; > > > + max-frequency = <150000000>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; > > > + status = "okay"; > > > +}; > > > + > > > +&sdhci { > > > + bus-width = <8>; > > > + mmc-hs400-1_8v; > > > + mmc-hs400-enhanced-strobe; > > > + non-removable; > > > + status = "okay"; > > > +}; > > > + > > > +&tcphy0 { > > > + status = "okay"; > > > +}; > > > + > > > +&tcphy1 { > > > + status = "okay"; > > > +}; > > > + > > > +&tsadc { > > > + /* tshut mode 0:CRU 1:GPIO */ > > > + rockchip,hw-tshut-mode = <1>; > > > + /* tshut polarity 0:LOW 1:HIGH */ > > > + rockchip,hw-tshut-polarity = <1>; > > > + status = "okay"; > > > +}; > > > + > > > +&u2phy0 { > > > + status = "okay"; > > > + > > > + u2phy0_otg: otg-port { > > > + status = "okay"; > > > + }; > > > + > > > + u2phy0_host: host-port { > > > + phy-supply = <&vcc5v0_host>; > > > + status = "okay"; > > > + }; > > > +}; > > > + > > > +&u2phy1 { > > > + status = "okay"; > > > + > > > + u2phy1_otg: otg-port { > > > + status = "okay"; > > > + }; > > > + > > > + u2phy1_host: host-port { > > > + phy-supply = <&vcc5v0_host>; > > > + status = "okay"; > > > + }; > > > +}; > > > + > > > +&uart0 { > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&uart0_xfer &uart0_cts>; > > > + status = "okay"; > > > +}; > > > + > > > +&uart2 { > > > + status = "okay"; > > > +}; > > > + > > > +&usb_host0_ehci { > > > + status = "okay"; > > > +}; > > > + > > > +&usb_host0_ohci { > > > + status = "okay"; > > > +}; > > > + > > > +&usb_host1_ehci { > > > + status = "okay"; > > > +}; > > > + > > > +&usb_host1_ohci { > > > + status = "okay"; > > > +}; > > > + > > > +&usbdrd3_0 { > > > + status = "okay"; > > > +}; > > > + > > > +&usbdrd_dwc3_0 { > > > + status = "okay"; > > > + dr_mode = "otg"; > > > +}; > > > + > > > +&usbdrd3_1 { > > > + status = "okay"; > > > +}; > > > + > > > +&usbdrd_dwc3_1 { > > > + status = "okay"; > > > + dr_mode = "host"; > > > +}; > > > + > > > +&vopb { > > > + status = "okay"; > > > +}; > > > + > > > +&vopb_mmu { > > > + status = "okay"; > > > +}; > > > + > > > +&vopl { > > > + status = "okay"; > > > +}; > > > + > > > +&vopl_mmu { > > > + status = "okay"; > > > +}; > > > diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS > > > index 1f51f65160..295730c91b 100644 > > > --- a/board/rockchip/evb_rk3399/MAINTAINERS > > > +++ b/board/rockchip/evb_rk3399/MAINTAINERS > > > @@ -30,3 +30,10 @@ S: Maintained > > > F: configs/orangepi-rk3399_defconfig > > > F: arch/arm/dts/rk3399-u-boot.dtsi > > > F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi > > > + > > > +ROCKPRO64 > > > +M: Akash Gajjar <akash@openedev.com> > > > +M: Jagan Teki <jagan@amarulasolutions.com> > > > +S: Maintained > > > +F: configs/rockpro64-rk3399_defconfig > > > +F: arch/arm/dts/rk3399-rockpro64-u-boot.dtsi > > > diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig > > > new file mode 100644 > > > index 0000000000..90bcaedbd2 > > > --- /dev/null > > > +++ b/configs/rockpro64-rk3399_defconfig > > > @@ -0,0 +1,60 @@ > > > +CONFIG_ARM=y > > > +CONFIG_ARCH_ROCKCHIP=y > > > +CONFIG_SYS_TEXT_BASE=0x00200000 > > > +CONFIG_SPL_LIBCOMMON_SUPPORT=y > > > +CONFIG_SPL_LIBGENERIC_SUPPORT=y > > > +CONFIG_SYS_MALLOC_F_LEN=0x4000 > > > +CONFIG_ROCKCHIP_RK3399=y > > > +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 > > > +CONFIG_DEBUG_UART_BASE=0xFF1A0000 > > > +CONFIG_DEBUG_UART_CLOCK=24000000 > > > +CONFIG_SPL_STACK_R_ADDR=0x80000 > > > +CONFIG_DEBUG_UART=y > > > +CONFIG_NR_DRAM_BANKS=1 > > > +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" > > > +# CONFIG_DISPLAY_CPUINFO is not set > > > +CONFIG_DISPLAY_BOARDINFO_LATE=y > > > +CONFIG_SPL_STACK_R=y > > > +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 > > > +CONFIG_CMD_BOOTZ=y > > > +CONFIG_CMD_GPT=y > > > +CONFIG_CMD_MMC=y > > > +CONFIG_CMD_SF=y > > > +CONFIG_CMD_USB=y > > > +# CONFIG_CMD_SETEXPR is not set > > > +CONFIG_CMD_TIME=y > > > +CONFIG_SPL_OF_CONTROL=y > > > +CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64" > > > +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" > > > +CONFIG_TPL=y > > > +CONFIG_ENV_IS_IN_MMC=y > > > +CONFIG_ROCKCHIP_GPIO=y > > > +CONFIG_SYS_I2C_ROCKCHIP=y > > > +CONFIG_MMC_DW=y > > > +CONFIG_MMC_DW_ROCKCHIP=y > > > +CONFIG_MMC_SDHCI=y > > > +CONFIG_MMC_SDHCI_ROCKCHIP=y > > > +CONFIG_DM_ETH=y > > > +CONFIG_ETH_DESIGNWARE=y > > > +CONFIG_GMAC_ROCKCHIP=y > > > +CONFIG_PMIC_RK8XX=y > > > +CONFIG_REGULATOR_PWM=y > > > +CONFIG_REGULATOR_RK8XX=y > > > +CONFIG_PWM_ROCKCHIP=y > > > +CONFIG_BAUDRATE=1500000 > > > +CONFIG_DEBUG_UART_SHIFT=2 > > > +CONFIG_SYSRESET=y > > > +CONFIG_USB=y > > > +CONFIG_USB_XHCI_HCD=y > > > +CONFIG_USB_XHCI_DWC3=y > > > +CONFIG_USB_EHCI_HCD=y > > > +CONFIG_USB_EHCI_GENERIC=y > > > +CONFIG_USB_HOST_ETHER=y > > > +CONFIG_USB_ETHER_ASIX=y > > > +CONFIG_USB_ETHER_ASIX88179=y > > > +CONFIG_USB_ETHER_MCS7830=y > > > +CONFIG_USB_ETHER_RTL8152=y > > > +CONFIG_USB_ETHER_SMSC95XX=y > > > +CONFIG_USE_TINY_PRINTF=y > > > +CONFIG_SPL_TINY_MEMSET=y > > > +CONFIG_ERRNO_STR=y > > _______________________________________________ > > U-Boot mailing list > > U-Boot@lists.denx.de > > https://lists.denx.de/listinfo/u-boot > >
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 529c506b4d..8522f01aca 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -114,6 +114,7 @@ dtb-$(CONFIG_ROCKCHIP_RK3399) += \ rk3399-puma-ddr1600.dtb \ rk3399-puma-ddr1866.dtb \ rk3399-rock960.dtb \ + rk3399-rockpro64.dtb dtb-$(CONFIG_ROCKCHIP_RV1108) += \ rv1108-elgin-r1.dtb \ diff --git a/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi new file mode 100644 index 0000000000..7bddc3acdb --- /dev/null +++ b/arch/arm/dts/rk3399-rockpro64-u-boot.dtsi @@ -0,0 +1,6 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* + * Copyright (C) 2019 Jagan Teki <jagan@amarulasolutions.com> + */ + +#include "rk3399-u-boot.dtsi" diff --git a/arch/arm/dts/rk3399-rockpro64.dts b/arch/arm/dts/rk3399-rockpro64.dts new file mode 100644 index 0000000000..1f2394e058 --- /dev/null +++ b/arch/arm/dts/rk3399-rockpro64.dts @@ -0,0 +1,712 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2017 Fuzhou Rockchip Electronics Co., Ltd. + * Copyright (c) 2018 Akash Gajjar <Akash_Gajjar@mentor.com> + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Pine64 RockPro64"; + compatible = "pine64,rockpro64", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + pinctrl-names = "default"; + pinctrl-0 = <&pwrbtn>; + + power { + debounce-interval = <100>; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + label = "GPIO Key Power"; + linux,code = <KEY_POWER>; + wakeup-source; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&work_led_gpio>, <&diy_led_gpio>; + + work-led { + label = "work"; + default-state = "on"; + gpios = <&gpio0 RK_PB3 GPIO_ACTIVE_HIGH>; + }; + + diy-led { + label = "diy"; + default-state = "off"; + gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_HIGH>; + }; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + + /* + * On the module itself this is one of these (depending + * on the actual card populated): + * - SDIO_RESET_L_WL_REG_ON + * - PDN (power down when low) + */ + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + vcc12v_dcin: vcc12v-dcin { + compatible = "regulator-fixed"; + regulator-name = "vcc12v_dcin"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + }; + + /* switched by pmic_sleep */ + vcc1v8_s3: vcca1v8_s3: vcc1v8-s3 { + compatible = "regulator-fixed"; + regulator-name = "vcc1v8_s3"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_1v8>; + }; + + vcc3v3_pcie: vcc3v3-pcie-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PD0 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&pcie_pwr_en>; + regulator-name = "vcc3v3_pcie"; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc12v_dcin>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + /* Actually 3 regulators (host0, 1, 2) controlled by the same gpio */ + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio4 RK_PD2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_typec: vcc5v0-typec-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio1 RK_PA3 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_typec_en>; + regulator-name = "vcc5v0_typec"; + regulator-always-on; + vin-supply = <&vcc5v0_usb>; + }; + + vcc5v0_sys: vcc5v0-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vcc5v0_usb: vcc5v0-usb { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_usb"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&vcc12v_dcin>; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcca_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v0_touch: LDO_REG2 { + regulator-name = "vcc3v0_touch"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc_sdio: LDO_REG4 { + regulator-name = "vcc_sdio"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcca1v8_codec: LDO_REG7 { + regulator-name = "vcca1v8_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcc3v3_s3: vcc_lan: SWITCH_REG1 { + regulator-name = "vcc3v3_s3"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc3v3_s0: SWITCH_REG2 { + regulator-name = "vcc3v3_s0"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; + + fusb0: typec-portc@22 { + compatible = "fcs,fusb302"; + reg = <0x22>; + interrupt-parent = <&gpio1>; + interrupts = <RK_PA2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&fusb0_int>; + vbus-supply = <&vcc5v0_typec>; + status = "okay"; + }; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcca1v8_codec>; + sdmmc-supply = <&vcc_sdio>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + pmu1830-supply = <&vcc_3v0>; + status = "okay"; +}; + +&pinctrl { + buttons { + pwrbtn: pwrbtn { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + fusb302x { + fusb0_int: fusb0-int { + rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + leds { + work_led_gpio: work_led-gpio { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + diy_led_gpio: diy_led-gpio { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pcie { + pcie_pwr_en: pcie-pwr-en { + rockchip,pins = <1 RK_PD0 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + usb-typec { + vcc5v0_typec_en: vcc5v0_typec_en { + rockchip,pins = <1 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <4 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm0 { + status = "okay"; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcca1v8_s3>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts>; + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/board/rockchip/evb_rk3399/MAINTAINERS b/board/rockchip/evb_rk3399/MAINTAINERS index 1f51f65160..295730c91b 100644 --- a/board/rockchip/evb_rk3399/MAINTAINERS +++ b/board/rockchip/evb_rk3399/MAINTAINERS @@ -30,3 +30,10 @@ S: Maintained F: configs/orangepi-rk3399_defconfig F: arch/arm/dts/rk3399-u-boot.dtsi F: arch/arm/dts/rk3399-orangepi-u-boot.dtsi + +ROCKPRO64 +M: Akash Gajjar <akash@openedev.com> +M: Jagan Teki <jagan@amarulasolutions.com> +S: Maintained +F: configs/rockpro64-rk3399_defconfig +F: arch/arm/dts/rk3399-rockpro64-u-boot.dtsi diff --git a/configs/rockpro64-rk3399_defconfig b/configs/rockpro64-rk3399_defconfig new file mode 100644 index 0000000000..90bcaedbd2 --- /dev/null +++ b/configs/rockpro64-rk3399_defconfig @@ -0,0 +1,60 @@ +CONFIG_ARM=y +CONFIG_ARCH_ROCKCHIP=y +CONFIG_SYS_TEXT_BASE=0x00200000 +CONFIG_SPL_LIBCOMMON_SUPPORT=y +CONFIG_SPL_LIBGENERIC_SUPPORT=y +CONFIG_SYS_MALLOC_F_LEN=0x4000 +CONFIG_ROCKCHIP_RK3399=y +CONFIG_ROCKCHIP_SPL_RESERVE_IRAM=0x50000 +CONFIG_DEBUG_UART_BASE=0xFF1A0000 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SPL_STACK_R_ADDR=0x80000 +CONFIG_DEBUG_UART=y +CONFIG_NR_DRAM_BANKS=1 +CONFIG_DEFAULT_FDT_FILE="rockchip/rk3399-rockpro64.dtb" +# CONFIG_DISPLAY_CPUINFO is not set +CONFIG_DISPLAY_BOARDINFO_LATE=y +CONFIG_SPL_STACK_R=y +CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN=0x10000 +CONFIG_CMD_BOOTZ=y +CONFIG_CMD_GPT=y +CONFIG_CMD_MMC=y +CONFIG_CMD_SF=y +CONFIG_CMD_USB=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_TIME=y +CONFIG_SPL_OF_CONTROL=y +CONFIG_DEFAULT_DEVICE_TREE="rk3399-rockpro64" +CONFIG_OF_SPL_REMOVE_PROPS="pinctrl-0 pinctrl-names clock-names interrupt-parent assigned-clocks assigned-clock-rates assigned-clock-parents" +CONFIG_TPL=y +CONFIG_ENV_IS_IN_MMC=y +CONFIG_ROCKCHIP_GPIO=y +CONFIG_SYS_I2C_ROCKCHIP=y +CONFIG_MMC_DW=y +CONFIG_MMC_DW_ROCKCHIP=y +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_ROCKCHIP=y +CONFIG_DM_ETH=y +CONFIG_ETH_DESIGNWARE=y +CONFIG_GMAC_ROCKCHIP=y +CONFIG_PMIC_RK8XX=y +CONFIG_REGULATOR_PWM=y +CONFIG_REGULATOR_RK8XX=y +CONFIG_PWM_ROCKCHIP=y +CONFIG_BAUDRATE=1500000 +CONFIG_DEBUG_UART_SHIFT=2 +CONFIG_SYSRESET=y +CONFIG_USB=y +CONFIG_USB_XHCI_HCD=y +CONFIG_USB_XHCI_DWC3=y +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_GENERIC=y +CONFIG_USB_HOST_ETHER=y +CONFIG_USB_ETHER_ASIX=y +CONFIG_USB_ETHER_ASIX88179=y +CONFIG_USB_ETHER_MCS7830=y +CONFIG_USB_ETHER_RTL8152=y +CONFIG_USB_ETHER_SMSC95XX=y +CONFIG_USE_TINY_PRINTF=y +CONFIG_SPL_TINY_MEMSET=y +CONFIG_ERRNO_STR=y