| Message ID | 20190803114612.4830-1-andyshrk@gmail.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | arm64: dts: rockchip: Add dts for Leez RK3399 P710 SBC | expand |
Hi Andy, Am Samstag, 3. August 2019, 13:46:12 CEST schrieb Andy Yan: > Leez P710 is a RK3399 based SBC, designed by Leez team > from lenovo [0]. > > Specification > - Rockchip RK3399 > - 4/2GB LPDDR4 > - TF sd scard slot > - eMMC > - M.2 B-Key for 4G LTE > - AP6256 for WiFi + BT > - Gigabit ethernet > - HDMI out > - 40 pin header > - TYPE-C Power supply > > [0] https://leez.lenovo.com > > Signed-off-by: Andy Yan <andyshrk@gmail.com> > --- > .../devicetree/bindings/arm/rockchip.yaml | 5 + > arch/arm64/boot/dts/rockchip/Makefile | 1 + > .../boot/dts/rockchip/rk3399-leez-p710.dts | 635 ++++++++++++++++++ > 3 files changed, 641 insertions(+) > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml > index 34865042f4e4..da9cd947abfa 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > @@ -329,6 +329,11 @@ properties: > - khadas,edge-v > - const: rockchip,rk3399 > > + - description: Leez RK3399 P710 > + items: > + - const: leez,p710 Is "leez" really the vendor? Part of me would assume something like lenovo,leez-p710 So please clarify :-) And also please make sure the decided vendor is part of the vendor-prefixes binding in Documentation/devicestree/bindings/vendor-prefixes.yaml > + - const: rockchip,rk3399 > + > - description: mqmaker MiQi > items: > - const: mqmaker,miqi > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > index daa2c78e22c3..1f18a9392d15 100644 > --- a/arch/arm64/boot/dts/rockchip/Makefile > +++ b/arch/arm64/boot/dts/rockchip/Makefile > @@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts > new file mode 100644 > index 000000000000..b342f5e8692b > --- /dev/null > +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts > @@ -0,0 +1,635 @@ > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > +/* > + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com> > + */ > + > +/dts-v1/; > +#include <dt-bindings/input/linux-event-codes.h> > +#include <dt-bindings/pwm/pwm.h> > +#include "rk3399.dtsi" > +#include "rk3399-opp.dtsi" > + > +/ { > + model = "Leez RK3399 P710"; > + compatible = "leez,p710", "rockchip,rk3399"; same comment as above, so maybe: model = "Lenovo Leez RK3399 P710"; compatible = "lenovo,leez-p710", "rockchip,rk3399"; > + > + chosen { > + stdout-path = "serial2:1500000n8"; > + }; > + > + clkin_gmac: external-gmac-clock { > + compatible = "fixed-clock"; > + clock-frequency = <125000000>; > + clock-output-names = "clkin_gmac"; > + #clock-cells = <0>; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + clocks = <&rk808 1>; > + clock-names = "ext_clock"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_enable_h>; > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > + }; > + > + dc5v_adp: dc-5v { > + compatible = "regulator-fixed"; > + regulator-name = "dc5v_adapter"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + }; > + > + vcc5v0_sys: vcc-sys { vcc5v0_sys: vcc5v0-sys ? > + compatible = "regulator-fixed"; > + regulator-name = "vcc5v0_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + vin-supply = <&dc5v_adp>; > + }; > + > + vcc3v3_sys: vcc3v3-sys { > + compatible = "regulator-fixed"; > + regulator-name = "vcc3v3_sys"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc5v0_host: vcc5v0-host-regulator { > + compatible = "regulator-fixed"; > + enable-active-high; > + gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; > + pinctrl-names = "default"; > + pinctrl-0 = <&vcc5v0_host_en>; > + regulator-name = "vcc5v0_host"; > + regulator-always-on; > + vin-supply = <&vcc5v0_sys>; > + }; > + > + vcc_lan: vcc3v3-phy-regulator { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_lan"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3300000>; > + regulator-max-microvolt = <3300000>; > + > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; In general, please model an actual regulator-tree and do not copy the unspecific Rockchip vendor tree. These unconnected regulators are a very good indicator that the real power-tree got ignored (missing vin-supply here) I found schematics on https://github.com/leezsbc/resources/wiki/Leez-P710: 链接: https://pan.baidu.com/s/1NPWbuI5csT4zftKUCnRs7g 提取码: rvrh and there the power-tree is described in a complete way. regulator/regulator_summaray in the kernels debugfs should show a nice tree structure starting from the dc-adapter input. Also please use names matching the supply names from the schematics. Same for pinctrl names, please use names as used in the board schematics. > + vdd_log: vdd-log { > + compatible = "pwm-regulator"; > + pwms = <&pwm2 0 25000 1>; > + regulator-name = "vdd_log"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <800000>; > + regulator-max-microvolt = <1400000>; > + vin-supply = <&vcc5v0_sys>; > + }; > +}; > + > +&cpu_l0 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l1 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l2 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_l3 { > + cpu-supply = <&vdd_cpu_l>; > +}; > + > +&cpu_b0 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&cpu_b1 { > + cpu-supply = <&vdd_cpu_b>; > +}; > + > +&emmc_phy { > + status = "okay"; > +}; > + > +&gmac { > + assigned-clocks = <&cru SCLK_RMII_SRC>; > + assigned-clock-parents = <&clkin_gmac>; > + clock_in_out = "input"; > + phy-supply = <&vcc_lan>; > + phy-mode = "rgmii"; > + pinctrl-names = "default"; > + pinctrl-0 = <&rgmii_pins>; > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > + snps,reset-active-low; > + snps,reset-delays-us = <0 10000 50000>; > + tx_delay = <0x28>; > + rx_delay = <0x11>; > + status = "okay"; > +}; > + > +&gpu { > + mali-supply = <&vdd_gpu>; > + status = "okay"; > +}; > + > +&hdmi { > + ddc-i2c-bus = <&i2c3>; can this also use the internal i2c inside the dw-hdmi? > + pinctrl-names = "default"; > + pinctrl-0 = <&hdmi_cec>; > + status = "okay"; > +}; > + > +&hdmi_sound { > + status = "okay"; > +}; > + > +&i2c0 { > + clock-frequency = <400000>; > + i2c-scl-rising-time-ns = <168>; > + i2c-scl-falling-time-ns = <4>; > + status = "okay"; > + > + rk808: pmic@1b { > + compatible = "rockchip,rk808"; > + reg = <0x1b>; > + interrupt-parent = <&gpio1>; > + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; > + #clock-cells = <1>; > + clock-output-names = "xin32k", "rk808-clkout2"; > + pinctrl-names = "default"; > + pinctrl-0 = <&pmic_int_l>; > + rockchip,system-power-controller; > + wakeup-source; > + > + vcc1-supply = <&vcc5v0_sys>; > + vcc2-supply = <&vcc5v0_sys>; > + vcc3-supply = <&vcc5v0_sys>; > + vcc4-supply = <&vcc5v0_sys>; > + vcc6-supply = <&vcc5v0_sys>; > + vcc7-supply = <&vcc5v0_sys>; > + vcc8-supply = <&vcc3v3_sys>; > + vcc9-supply = <&vcc5v0_sys>; > + vcc10-supply = <&vcc5v0_sys>; > + vcc11-supply = <&vcc5v0_sys>; > + vcc12-supply = <&vcc3v3_sys>; > + vddio-supply = <&vcc_1v8>; > + > + regulators { > + vdd_center: DCDC_REG1 { > + regulator-name = "vdd_center"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vdd_cpu_l: DCDC_REG2 { > + regulator-name = "vdd_cpu_l"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <750000>; > + regulator-max-microvolt = <1350000>; > + regulator-ramp-delay = <6001>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_ddr: DCDC_REG3 { > + regulator-name = "vcc_ddr"; > + regulator-always-on; > + regulator-boot-on; > + regulator-state-mem { > + regulator-on-in-suspend; > + }; > + }; > + > + vcc_1v8: DCDC_REG4 { > + regulator-name = "vcc_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vcc1v8_dvp: LDO_REG1 { > + regulator-name = "vcc1v8_dvp"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc1v8_hdmi: LDO_REG2 { > + regulator-name = "vcc1v8_hdmi"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcca_1v8: LDO_REG3 { > + regulator-name = "vcca_1v8"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1800000>; > + regulator-max-microvolt = <1800000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1800000>; > + }; > + }; > + > + vccio_sd: LDO_REG4 { > + regulator-name = "vccio_sd"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + > + vcca3v0_codec: LDO_REG5 { > + regulator-name = "vcca3v0_codec"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_1v5: LDO_REG6 { > + regulator-name = "vcc_1v5"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <1500000>; > + regulator-max-microvolt = <1500000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <1500000>; > + }; > + }; > + > + vcc0v9_hdmi: LDO_REG7 { > + regulator-name = "vcc0v9_hdmi"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <900000>; > + regulator-max-microvolt = <900000>; > + regulator-state-mem { > + regulator-off-in-suspend; > + }; > + }; > + > + vcc_3v0: LDO_REG8 { > + regulator-name = "vcc_3v0"; > + regulator-always-on; > + regulator-boot-on; > + regulator-min-microvolt = <3000000>; > + regulator-max-microvolt = <3000000>; > + regulator-state-mem { > + regulator-on-in-suspend; > + regulator-suspend-microvolt = <3000000>; > + }; > + }; > + unneeded blank line > + }; > + }; > + Heiko
Hi Andy, Am Sonntag, 4. August 2019, 10:38:26 CEST schrieb Andy Yan: > Heiko Stuebner <heiko@sntech.de> 于2019年8月4日周日 上午8:34写道： > > Am Samstag, 3. August 2019, 13:46:12 CEST schrieb Andy Yan: > > > Leez P710 is a RK3399 based SBC, designed by Leez team > > > from lenovo [0]. > > > > > > Specification > > > - Rockchip RK3399 > > > - 4/2GB LPDDR4 > > > - TF sd scard slot > > > - eMMC > > > - M.2 B-Key for 4G LTE > > > - AP6256 for WiFi + BT > > > - Gigabit ethernet > > > - HDMI out > > > - 40 pin header > > > - TYPE-C Power supply > > > > > > [0] https://leez.lenovo.com > > > > > > Signed-off-by: Andy Yan <andyshrk@gmail.com> > > > --- > > > .../devicetree/bindings/arm/rockchip.yaml | 5 + > > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > > > .../boot/dts/rockchip/rk3399-leez-p710.dts | 635 ++++++++++++++++++ > > > 3 files changed, 641 insertions(+) > > > create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts > > > > > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml > > b/Documentation/devicetree/bindings/arm/rockchip.yaml > > > index 34865042f4e4..da9cd947abfa 100644 > > > --- a/Documentation/devicetree/bindings/arm/rockchip.yaml > > > +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml > > > @@ -329,6 +329,11 @@ properties: > > > - khadas,edge-v > > > - const: rockchip,rk3399 > > > > > > + - description: Leez RK3399 P710 > > > + items: > > > + - const: leez,p710 > > > > Is "leez" really the vendor? > > Part of me would assume something like > > lenovo,leez-p710 > > > > > According to Leez team， they want to treat Leez an independent vendor here。 ok, that should be fine then. You'll just have to also add an entry for them into the vendor-prefixes.yaml file then. (And of course rework the regulator tree) Thanks Heiko > > So please clarify :-) > > And also please make sure the decided vendor is part of the vendor-prefixes > > binding in Documentation/devicestree/bindings/vendor-prefixes.yaml > > > > > + - const: rockchip,rk3399 > > > + > > > - description: mqmaker MiQi > > > items: > > > - const: mqmaker,miqi > > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile > > b/arch/arm64/boot/dts/rockchip/Makefile > > > index daa2c78e22c3..1f18a9392d15 100644 > > > --- a/arch/arm64/boot/dts/rockchip/Makefile > > > +++ b/arch/arm64/boot/dts/rockchip/Makefile > > > @@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb > > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb > > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb > > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb > > > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb > > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb > > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb > > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb > > > diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts > > b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts > > > new file mode 100644 > > > index 000000000000..b342f5e8692b > > > --- /dev/null > > > +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts > > > @@ -0,0 +1,635 @@ > > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > > +/* > > > + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com> > > > + */ > > > + > > > +/dts-v1/; > > > +#include <dt-bindings/input/linux-event-codes.h> > > > +#include <dt-bindings/pwm/pwm.h> > > > +#include "rk3399.dtsi" > > > +#include "rk3399-opp.dtsi" > > > + > > > +/ { > > > + model = "Leez RK3399 P710"; > > > + compatible = "leez,p710", "rockchip,rk3399"; > > > > same comment as above, so maybe: > > model = "Lenovo Leez RK3399 P710"; > > compatible = "lenovo,leez-p710", "rockchip,rk3399"; > > > > > > > > > + > > > + chosen { > > > + stdout-path = "serial2:1500000n8"; > > > + }; > > > + > > > + clkin_gmac: external-gmac-clock { > > > + compatible = "fixed-clock"; > > > + clock-frequency = <125000000>; > > > + clock-output-names = "clkin_gmac"; > > > + #clock-cells = <0>; > > > + }; > > > + > > > + sdio_pwrseq: sdio-pwrseq { > > > + compatible = "mmc-pwrseq-simple"; > > > + clocks = <&rk808 1>; > > > + clock-names = "ext_clock"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&wifi_enable_h>; > > > + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; > > > + }; > > > + > > > + dc5v_adp: dc-5v { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "dc5v_adapter"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <5000000>; > > > + regulator-max-microvolt = <5000000>; > > > + }; > > > + > > > + vcc5v0_sys: vcc-sys { > > > > vcc5v0_sys: vcc5v0-sys ? > > > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc5v0_sys"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <5000000>; > > > + regulator-max-microvolt = <5000000>; > > > + vin-supply = <&dc5v_adp>; > > > + }; > > > + > > > + vcc3v3_sys: vcc3v3-sys { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc3v3_sys"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + vin-supply = <&vcc5v0_sys>; > > > + }; > > > + > > > + vcc5v0_host: vcc5v0-host-regulator { > > > + compatible = "regulator-fixed"; > > > + enable-active-high; > > > + gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&vcc5v0_host_en>; > > > + regulator-name = "vcc5v0_host"; > > > + regulator-always-on; > > > + vin-supply = <&vcc5v0_sys>; > > > + }; > > > + > > > + vcc_lan: vcc3v3-phy-regulator { > > > + compatible = "regulator-fixed"; > > > + regulator-name = "vcc_lan"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3300000>; > > > + regulator-max-microvolt = <3300000>; > > > + > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > > In general, please model an actual regulator-tree and do not copy the > > unspecific Rockchip vendor tree. These unconnected regulators are a very > > good indicator that the real power-tree got ignored (missing vin-supply > > here) > > > > I found schematics on https://github.com/leezsbc/resources/wiki/Leez-P710: > > 链接: https://pan.baidu.com/s/1NPWbuI5csT4zftKUCnRs7g > > 提取码: rvrh > > > > and there the power-tree is described in a complete way. > > > > regulator/regulator_summaray in the kernels debugfs should > > show a nice tree structure starting from the dc-adapter input. > > > > Also please use names matching the supply names from the schematics. > > > > Same for pinctrl names, please use names as used in the board schematics. > > > > > > > + vdd_log: vdd-log { > > > + compatible = "pwm-regulator"; > > > + pwms = <&pwm2 0 25000 1>; > > > + regulator-name = "vdd_log"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <800000>; > > > + regulator-max-microvolt = <1400000>; > > > + vin-supply = <&vcc5v0_sys>; > > > + }; > > > +}; > > > + > > > +&cpu_l0 { > > > + cpu-supply = <&vdd_cpu_l>; > > > +}; > > > + > > > +&cpu_l1 { > > > + cpu-supply = <&vdd_cpu_l>; > > > +}; > > > + > > > +&cpu_l2 { > > > + cpu-supply = <&vdd_cpu_l>; > > > +}; > > > + > > > +&cpu_l3 { > > > + cpu-supply = <&vdd_cpu_l>; > > > +}; > > > + > > > +&cpu_b0 { > > > + cpu-supply = <&vdd_cpu_b>; > > > +}; > > > + > > > +&cpu_b1 { > > > + cpu-supply = <&vdd_cpu_b>; > > > +}; > > > + > > > +&emmc_phy { > > > + status = "okay"; > > > +}; > > > + > > > +&gmac { > > > + assigned-clocks = <&cru SCLK_RMII_SRC>; > > > + assigned-clock-parents = <&clkin_gmac>; > > > + clock_in_out = "input"; > > > + phy-supply = <&vcc_lan>; > > > + phy-mode = "rgmii"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&rgmii_pins>; > > > + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; > > > + snps,reset-active-low; > > > + snps,reset-delays-us = <0 10000 50000>; > > > + tx_delay = <0x28>; > > > + rx_delay = <0x11>; > > > + status = "okay"; > > > +}; > > > + > > > +&gpu { > > > + mali-supply = <&vdd_gpu>; > > > + status = "okay"; > > > +}; > > > + > > > +&hdmi { > > > + ddc-i2c-bus = <&i2c3>; > > > > can this also use the internal i2c inside the dw-hdmi? > > > > > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&hdmi_cec>; > > > + status = "okay"; > > > +}; > > > + > > > +&hdmi_sound { > > > + status = "okay"; > > > +}; > > > + > > > +&i2c0 { > > > + clock-frequency = <400000>; > > > + i2c-scl-rising-time-ns = <168>; > > > + i2c-scl-falling-time-ns = <4>; > > > + status = "okay"; > > > + > > > + rk808: pmic@1b { > > > + compatible = "rockchip,rk808"; > > > + reg = <0x1b>; > > > + interrupt-parent = <&gpio1>; > > > + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; > > > + #clock-cells = <1>; > > > + clock-output-names = "xin32k", "rk808-clkout2"; > > > + pinctrl-names = "default"; > > > + pinctrl-0 = <&pmic_int_l>; > > > + rockchip,system-power-controller; > > > + wakeup-source; > > > + > > > + vcc1-supply = <&vcc5v0_sys>; > > > + vcc2-supply = <&vcc5v0_sys>; > > > + vcc3-supply = <&vcc5v0_sys>; > > > + vcc4-supply = <&vcc5v0_sys>; > > > + vcc6-supply = <&vcc5v0_sys>; > > > + vcc7-supply = <&vcc5v0_sys>; > > > + vcc8-supply = <&vcc3v3_sys>; > > > + vcc9-supply = <&vcc5v0_sys>; > > > + vcc10-supply = <&vcc5v0_sys>; > > > + vcc11-supply = <&vcc5v0_sys>; > > > + vcc12-supply = <&vcc3v3_sys>; > > > + vddio-supply = <&vcc_1v8>; > > > + > > > + regulators { > > > + vdd_center: DCDC_REG1 { > > > + regulator-name = "vdd_center"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <750000>; > > > + regulator-max-microvolt = <1350000>; > > > + regulator-ramp-delay = <6001>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vdd_cpu_l: DCDC_REG2 { > > > + regulator-name = "vdd_cpu_l"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <750000>; > > > + regulator-max-microvolt = <1350000>; > > > + regulator-ramp-delay = <6001>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc_ddr: DCDC_REG3 { > > > + regulator-name = "vcc_ddr"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc_1v8: DCDC_REG4 { > > > + regulator-name = "vcc_1v8"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = > > <1800000>; > > > + }; > > > + }; > > > + > > > + vcc1v8_dvp: LDO_REG1 { > > > + regulator-name = "vcc1v8_dvp"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc1v8_hdmi: LDO_REG2 { > > > + regulator-name = "vcc1v8_hdmi"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcca_1v8: LDO_REG3 { > > > + regulator-name = "vcca_1v8"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1800000>; > > > + regulator-max-microvolt = <1800000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = > > <1800000>; > > > + }; > > > + }; > > > + > > > + vccio_sd: LDO_REG4 { > > > + regulator-name = "vccio_sd"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3000000>; > > > + regulator-max-microvolt = <3000000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = > > <3000000>; > > > + }; > > > + }; > > > + > > > + vcca3v0_codec: LDO_REG5 { > > > + regulator-name = "vcca3v0_codec"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3000000>; > > > + regulator-max-microvolt = <3000000>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc_1v5: LDO_REG6 { > > > + regulator-name = "vcc_1v5"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <1500000>; > > > + regulator-max-microvolt = <1500000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = > > <1500000>; > > > + }; > > > + }; > > > + > > > + vcc0v9_hdmi: LDO_REG7 { > > > + regulator-name = "vcc0v9_hdmi"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <900000>; > > > + regulator-max-microvolt = <900000>; > > > + regulator-state-mem { > > > + regulator-off-in-suspend; > > > + }; > > > + }; > > > + > > > + vcc_3v0: LDO_REG8 { > > > + regulator-name = "vcc_3v0"; > > > + regulator-always-on; > > > + regulator-boot-on; > > > + regulator-min-microvolt = <3000000>; > > > + regulator-max-microvolt = <3000000>; > > > + regulator-state-mem { > > > + regulator-on-in-suspend; > > > + regulator-suspend-microvolt = > > <3000000>; > > > + }; > > > + }; > > > + > > > > unneeded blank line > > > > > + }; > > > + }; > > > + > > > > > > Heiko > > > > > >
diff --git a/Documentation/devicetree/bindings/arm/rockchip.yaml b/Documentation/devicetree/bindings/arm/rockchip.yaml index 34865042f4e4..da9cd947abfa 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.yaml +++ b/Documentation/devicetree/bindings/arm/rockchip.yaml @@ -329,6 +329,11 @@ properties: - khadas,edge-v - const: rockchip,rk3399 + - description: Leez RK3399 P710 + items: + - const: leez,p710 + - const: rockchip,rk3399 + - description: mqmaker MiQi items: - const: mqmaker,miqi diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index daa2c78e22c3..1f18a9392d15 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -20,6 +20,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-hugsun-x99.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-captain.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-khadas-edge-v.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-leez-p710.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopc-t4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-m4.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-nanopi-neo4.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts new file mode 100644 index 000000000000..b342f5e8692b --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts @@ -0,0 +1,635 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Andy Yan <andy.yan@gmail.com> + */ + +/dts-v1/; +#include <dt-bindings/input/linux-event-codes.h> +#include <dt-bindings/pwm/pwm.h> +#include "rk3399.dtsi" +#include "rk3399-opp.dtsi" + +/ { + model = "Leez RK3399 P710"; + compatible = "leez,p710", "rockchip,rk3399"; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + clkin_gmac: external-gmac-clock { + compatible = "fixed-clock"; + clock-frequency = <125000000>; + clock-output-names = "clkin_gmac"; + #clock-cells = <0>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + reset-gpios = <&gpio0 RK_PB2 GPIO_ACTIVE_LOW>; + }; + + dc5v_adp: dc-5v { + compatible = "regulator-fixed"; + regulator-name = "dc5v_adapter"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vcc5v0_sys: vcc-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc5v0_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + vin-supply = <&dc5v_adp>; + }; + + vcc3v3_sys: vcc3v3-sys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_sys"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc5v0_sys>; + }; + + vcc5v0_host: vcc5v0-host-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpio2 RK_PA2 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&vcc5v0_host_en>; + regulator-name = "vcc5v0_host"; + regulator-always-on; + vin-supply = <&vcc5v0_sys>; + }; + + vcc_lan: vcc3v3-phy-regulator { + compatible = "regulator-fixed"; + regulator-name = "vcc_lan"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_log: vdd-log { + compatible = "pwm-regulator"; + pwms = <&pwm2 0 25000 1>; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <800000>; + regulator-max-microvolt = <1400000>; + vin-supply = <&vcc5v0_sys>; + }; +}; + +&cpu_l0 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l1 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l2 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_l3 { + cpu-supply = <&vdd_cpu_l>; +}; + +&cpu_b0 { + cpu-supply = <&vdd_cpu_b>; +}; + +&cpu_b1 { + cpu-supply = <&vdd_cpu_b>; +}; + +&emmc_phy { + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_RMII_SRC>; + assigned-clock-parents = <&clkin_gmac>; + clock_in_out = "input"; + phy-supply = <&vcc_lan>; + phy-mode = "rgmii"; + pinctrl-names = "default"; + pinctrl-0 = <&rgmii_pins>; + snps,reset-gpio = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>; + snps,reset-active-low; + snps,reset-delays-us = <0 10000 50000>; + tx_delay = <0x28>; + rx_delay = <0x11>; + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_gpu>; + status = "okay"; +}; + +&hdmi { + ddc-i2c-bus = <&i2c3>; + pinctrl-names = "default"; + pinctrl-0 = <&hdmi_cec>; + status = "okay"; +}; + +&hdmi_sound { + status = "okay"; +}; + +&i2c0 { + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <168>; + i2c-scl-falling-time-ns = <4>; + status = "okay"; + + rk808: pmic@1b { + compatible = "rockchip,rk808"; + reg = <0x1b>; + interrupt-parent = <&gpio1>; + interrupts = <21 IRQ_TYPE_LEVEL_LOW>; + #clock-cells = <1>; + clock-output-names = "xin32k", "rk808-clkout2"; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int_l>; + rockchip,system-power-controller; + wakeup-source; + + vcc1-supply = <&vcc5v0_sys>; + vcc2-supply = <&vcc5v0_sys>; + vcc3-supply = <&vcc5v0_sys>; + vcc4-supply = <&vcc5v0_sys>; + vcc6-supply = <&vcc5v0_sys>; + vcc7-supply = <&vcc5v0_sys>; + vcc8-supply = <&vcc3v3_sys>; + vcc9-supply = <&vcc5v0_sys>; + vcc10-supply = <&vcc5v0_sys>; + vcc11-supply = <&vcc5v0_sys>; + vcc12-supply = <&vcc3v3_sys>; + vddio-supply = <&vcc_1v8>; + + regulators { + vdd_center: DCDC_REG1 { + regulator-name = "vdd_center"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_cpu_l: DCDC_REG2 { + regulator-name = "vdd_cpu_l"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <750000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_1v8: DCDC_REG4 { + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vcc1v8_dvp: LDO_REG1 { + regulator-name = "vcc1v8_dvp"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc1v8_hdmi: LDO_REG2 { + regulator-name = "vcc1v8_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcca_1v8: LDO_REG3 { + regulator-name = "vcca_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vccio_sd: LDO_REG4 { + regulator-name = "vccio_sd"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + vcca3v0_codec: LDO_REG5 { + regulator-name = "vcca3v0_codec"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_1v5: LDO_REG6 { + regulator-name = "vcc_1v5"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1500000>; + }; + }; + + vcc0v9_hdmi: LDO_REG7 { + regulator-name = "vcc0v9_hdmi"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <900000>; + regulator-max-microvolt = <900000>; + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vcc_3v0: LDO_REG8 { + regulator-name = "vcc_3v0"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + + }; + }; + + vdd_cpu_b: regulator@40 { + compatible = "silergy,syr827"; + reg = <0x40>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel1_gpio>; + regulator-name = "vdd_cpu_b"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; + + vdd_gpu: regulator@41 { + compatible = "silergy,syr828"; + reg = <0x41>; + fcs,suspend-voltage-selector = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&vsel2_gpio>; + regulator-name = "vdd_gpu"; + regulator-min-microvolt = <712500>; + regulator-max-microvolt = <1500000>; + regulator-ramp-delay = <1000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + + regulator-state-mem { + regulator-off-in-suspend; + }; + }; +}; + +&i2c1 { + i2c-scl-rising-time-ns = <300>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c3 { + i2c-scl-rising-time-ns = <450>; + i2c-scl-falling-time-ns = <15>; + status = "okay"; +}; + +&i2c4 { + i2c-scl-rising-time-ns = <600>; + i2c-scl-falling-time-ns = <20>; + status = "okay"; +}; + +&i2s0 { + rockchip,playback-channels = <8>; + rockchip,capture-channels = <8>; + status = "okay"; +}; + +&i2s1 { + rockchip,playback-channels = <2>; + rockchip,capture-channels = <2>; + status = "okay"; +}; + +&i2s2 { + status = "okay"; +}; + +&io_domains { + status = "okay"; + + bt656-supply = <&vcc1v8_dvp>; + audio-supply = <&vcc_1v8>; + sdmmc-supply = <&vccio_sd>; + gpio1830-supply = <&vcc_3v0>; +}; + +&pmu_io_domains { + status = "okay"; + pmu1830-supply = <&vcc_3v0>; +}; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <0 RK_PB1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_host_wake_l: bt-host-wake-l { + rockchip,pins = <0 RK_PA4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_l: bt-wake-l { + rockchip,pins = <2 RK_PD2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + pmic { + pmic_int_l: pmic-int-l { + rockchip,pins = <1 RK_PC5 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + vsel1_gpio: vsel1-gpio { + rockchip,pins = <1 RK_PC1 RK_FUNC_GPIO &pcfg_pull_down>; + }; + + vsel2_gpio: vsel2-gpio { + rockchip,pins = <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; + + usb2 { + vcc5v0_host_en: vcc5v0-host-en { + rockchip,pins = <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_enable_h: wifi-enable-h { + rockchip,pins = + <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_host_wake_l: wifi-host-wake-l { + rockchip,pins = <0 RK_PA3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&pwm2 { + status = "okay"; +}; + +&saradc { + status = "okay"; + + vref-supply = <&vcc_1v8>; +}; + +&sdio0 { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_host_wake_l>; + }; +}; + +&sdmmc { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + cd-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + disable-wp; + max-frequency = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_clk &sdmmc_cd &sdmmc_cmd &sdmmc_bus4>; + status = "okay"; +}; + +&sdhci { + bus-width = <8>; + mmc-hs400-1_8v; + mmc-hs400-enhanced-strobe; + non-removable; + status = "okay"; +}; + +&tcphy0 { + status = "okay"; +}; + +&tcphy1 { + status = "okay"; +}; + +&tsadc { + status = "okay"; + + /* tshut mode 0:CRU 1:GPIO */ + rockchip,hw-tshut-mode = <1>; + /* tshut polarity 0:LOW 1:HIGH */ + rockchip,hw-tshut-polarity = <1>; +}; + +&u2phy0 { + status = "okay"; + + u2phy0_otg: otg-port { + status = "okay"; + }; + + u2phy0_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&u2phy1 { + status = "okay"; + + u2phy1_otg: otg-port { + status = "okay"; + }; + + u2phy1_host: host-port { + phy-supply = <&vcc5v0_host>; + status = "okay"; + }; +}; + +&uart0 { + pinctrl-names = "default"; + pinctrl-0 = <&uart0_xfer &uart0_cts &uart0_rts>; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm43438-bt"; + clocks = <&rk808 1>; + clock-names = "ext_clock"; + device-wakeup-gpios = <&gpio2 RK_PD2 GPIO_ACTIVE_HIGH>; + host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; + +&usb_host1_ehci { + status = "okay"; +}; + +&usb_host1_ohci { + status = "okay"; +}; + +&usbdrd3_0 { + status = "okay"; +}; + +&usbdrd_dwc3_0 { + status = "okay"; + dr_mode = "otg"; +}; + +&usbdrd3_1 { + status = "okay"; +}; + +&usbdrd_dwc3_1 { + status = "okay"; + dr_mode = "host"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +};
Leez P710 is a RK3399 based SBC, designed by Leez team from lenovo [0]. Specification - Rockchip RK3399 - 4/2GB LPDDR4 - TF sd scard slot - eMMC - M.2 B-Key for 4G LTE - AP6256 for WiFi + BT - Gigabit ethernet - HDMI out - 40 pin header - TYPE-C Power supply [0] https://leez.lenovo.com Signed-off-by: Andy Yan <andyshrk@gmail.com> --- .../devicetree/bindings/arm/rockchip.yaml | 5 + arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-leez-p710.dts | 635 ++++++++++++++++++ 3 files changed, 641 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-leez-p710.dts