diff mbox series

[v2,2/8] dt-bindings: sram: Convert SRAM bindings to json-schema

Message ID 20190918173141.4314-2-krzk@kernel.org (mailing list archive)
State New, archived
Headers show
Series [v2,1/8] dt-bindings: rng: exynos4-rng: Convert Exynos PRNG bindings to json-schema | expand

Commit Message

Krzysztof Kozlowski Sept. 18, 2019, 5:31 p.m. UTC
Convert generic mmio-sram bindings to DT schema format using
json-schema.

Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>

---

Changes since v1:
1. Indent example with four spaces (more readable).
---
 .../devicetree/bindings/sram/sram.txt         |  80 ----------
 .../devicetree/bindings/sram/sram.yaml        | 138 ++++++++++++++++++
 2 files changed, 138 insertions(+), 80 deletions(-)
 delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt
 create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml

Comments

Rob Herring (Arm) Oct. 1, 2019, 2 p.m. UTC | #1
On Wed, Sep 18, 2019 at 07:31:35PM +0200, Krzysztof Kozlowski wrote:
> Convert generic mmio-sram bindings to DT schema format using
> json-schema.

I've been slow getting to this because I started on the same thing...

> 
> Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> 
> ---
> 
> Changes since v1:
> 1. Indent example with four spaces (more readable).
> ---
>  .../devicetree/bindings/sram/sram.txt         |  80 ----------
>  .../devicetree/bindings/sram/sram.yaml        | 138 ++++++++++++++++++
>  2 files changed, 138 insertions(+), 80 deletions(-)
>  delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt
>  create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml

> diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
> new file mode 100644
> index 000000000000..8d9d6ce494b2
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sram/sram.yaml
> @@ -0,0 +1,138 @@
> +# SPDX-License-Identifier: GPL-2.0
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/sram/sram.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Generic on-chip SRAM
> +
> +maintainers:
> +  - FIXME <who@should.it.be>

You can put me.

> +
> +description: |+
> +  Simple IO memory regions to be managed by the genalloc API.
> +
> +  Each child of the sram node specifies a region of reserved memory. Each
> +  child node should use a 'reg' property to specify a specific range of
> +  reserved memory.
> +
> +  Following the generic-names recommended practice, node names should
> +  reflect the purpose of the node. Unit address (@<address>) should be
> +  appended to the name.
> +
> +properties:
> +  $nodename:
> +    pattern: "^sram(@.*)?"
> +
> +  compatible:
> +    items:
> +      - enum:
> +          - mmio-sram
> +          - atmel,sama5d2-securam

I was trying to go down the path of putting all the compatibles for 
various SRAM bindings here, but I ran into some issues. I need to 
revisit as I've forgotten the exact issue.

This would need to be a 'contains' if this is going to work for others.

> +
> +  reg:
> +    maxItems: 1
> +
> +  "#address-cells":
> +    description: Should use the same values as the root node.
> +
> +  "#size-cells":
> +    description: Should use the same values as the root node.

I defined both of these to be 1 as 4GB of SRAM should be enough for a 
while. We can debate 1 or 2 cells vs. 1, but there's no reason it has to 
be the same as the root (unless we're failing to do address 
translation).

> +
> +  ranges:
> +    description:
> +      Should translate from local addresses within the sram to bus addresses.
> +
> +  no-memory-wc:
> +    description:
> +      The flag indicating, that SRAM memory region has not to be remapped
> +      as write combining. WC is used by default.
> +    type: boolean
> +
> +  # TODO: additionalProperties: false
> +
> +patternProperties:
> +  "^([a-z]*-)?sram@[a-f0-9]$":
> +    type: object
> +    description:
> +      Each child of the sram node specifies a region of reserved memory.
> +    properties:
> +      reg:
> +        description:
> +          IO mem address range, relative to the SRAM range.

maxItems: 1

> +
> +      compatible:
> +        $ref: /schemas/types.yaml#/definitions/string
> +        description:
> +          Should contain a vendor specific string in the form
> +          <vendor>,[<device>-]<usage>
> +
> +      pool:
> +        description:
> +          Indicates that the particular reserved SRAM area is addressable
> +          and in use by another device or devices.
> +        type: boolean
> +
> +      export:
> +        description:
> +          Indicates that the reserved SRAM area may be accessed outside
> +          of the kernel, e.g. by bootloader or userspace.
> +        type: boolean
> +
> +      protect-exec:
> +        description: |
> +          Same as 'pool' above but with the additional constraint that code
> +          will be run from the region and that the memory is maintained as
> +          read-only, executable during code execution. NOTE: This region must
> +          be page aligned on start and end in order to properly allow
> +          manipulation of the page attributes.
> +        type: boolean
> +
> +      label:
> +        $ref: /schemas/types.yaml#/definitions/string

Already has a type definition.

> +        description:
> +          The name for the reserved partition, if omitted, the label is taken
> +          from the node name excluding the unit address.
> +
> +      clocks:
> +        description:
> +          A list of phandle and clock specifier pair that controls the
> +          single SRAM clock.
> +
> +      # TODO: additionalProperties: false
> +
> +    required:
> +      - reg
> +
> +required:
> +  - compatible
> +  - reg
> +  - "#address-cells"
> +  - "#size-cells"
> +  - ranges
> +
> +examples:
> +  - |
> +    sram: sram@5c000000 {
> +        compatible = "mmio-sram";
> +        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
> +
> +        #address-cells = <1>;
> +        #size-cells = <1>;
> +        ranges = <0 0x5c000000 0x40000>;
> +
> +        smp-sram@100 {
> +            compatible = "socvendor,smp-sram";
> +            reg = <0x100 0x50>;
> +        };
> +
> +        device-sram@1000 {
> +            reg = <0x1000 0x1000>;
> +            pool;
> +        };
> +
> +        exported@20000 {
> +            reg = <0x20000 0x20000>;
> +            export;
> +        };
> +    };
> -- 
> 2.17.1
>
Krzysztof Kozlowski Oct. 1, 2019, 3:24 p.m. UTC | #2
On Tue, Oct 01, 2019 at 09:00:03AM -0500, Rob Herring wrote:
> On Wed, Sep 18, 2019 at 07:31:35PM +0200, Krzysztof Kozlowski wrote:
> > Convert generic mmio-sram bindings to DT schema format using
> > json-schema.
> 
> I've been slow getting to this because I started on the same thing...
> 
> > 
> > Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
> > 
> > ---
> > 
> > Changes since v1:
> > 1. Indent example with four spaces (more readable).
> > ---
> >  .../devicetree/bindings/sram/sram.txt         |  80 ----------
> >  .../devicetree/bindings/sram/sram.yaml        | 138 ++++++++++++++++++
> >  2 files changed, 138 insertions(+), 80 deletions(-)
> >  delete mode 100644 Documentation/devicetree/bindings/sram/sram.txt
> >  create mode 100644 Documentation/devicetree/bindings/sram/sram.yaml
> 
> > diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
> > new file mode 100644
> > index 000000000000..8d9d6ce494b2
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/sram/sram.yaml
> > @@ -0,0 +1,138 @@
> > +# SPDX-License-Identifier: GPL-2.0
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/sram/sram.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Generic on-chip SRAM
> > +
> > +maintainers:
> > +  - FIXME <who@should.it.be>
> 
> You can put me.

Sure.

> 
> > +
> > +description: |+
> > +  Simple IO memory regions to be managed by the genalloc API.
> > +
> > +  Each child of the sram node specifies a region of reserved memory. Each
> > +  child node should use a 'reg' property to specify a specific range of
> > +  reserved memory.
> > +
> > +  Following the generic-names recommended practice, node names should
> > +  reflect the purpose of the node. Unit address (@<address>) should be
> > +  appended to the name.
> > +
> > +properties:
> > +  $nodename:
> > +    pattern: "^sram(@.*)?"
> > +
> > +  compatible:
> > +    items:
> > +      - enum:
> > +          - mmio-sram
> > +          - atmel,sama5d2-securam
> 
> I was trying to go down the path of putting all the compatibles for 
> various SRAM bindings here, but I ran into some issues. I need to 
> revisit as I've forgotten the exact issue.
> 
> This would need to be a 'contains' if this is going to work for others.

OK.

> 
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  "#address-cells":
> > +    description: Should use the same values as the root node.
> > +
> > +  "#size-cells":
> > +    description: Should use the same values as the root node.
> 
> I defined both of these to be 1 as 4GB of SRAM should be enough for a 
> while. We can debate 1 or 2 cells vs. 1, but there's no reason it has to 
> be the same as the root (unless we're failing to do address 
> translation).

That was copied from txt version. I can adjust them to 1 although this
is will more than simple conversion.

> 
> > +
> > +  ranges:
> > +    description:
> > +      Should translate from local addresses within the sram to bus addresses.
> > +
> > +  no-memory-wc:
> > +    description:
> > +      The flag indicating, that SRAM memory region has not to be remapped
> > +      as write combining. WC is used by default.
> > +    type: boolean
> > +
> > +  # TODO: additionalProperties: false
> > +
> > +patternProperties:
> > +  "^([a-z]*-)?sram@[a-f0-9]$":
> > +    type: object
> > +    description:
> > +      Each child of the sram node specifies a region of reserved memory.
> > +    properties:
> > +      reg:
> > +        description:
> > +          IO mem address range, relative to the SRAM range.
> 
> maxItems: 1

OK

> 
> > +
> > +      compatible:
> > +        $ref: /schemas/types.yaml#/definitions/string
> > +        description:
> > +          Should contain a vendor specific string in the form
> > +          <vendor>,[<device>-]<usage>
> > +
> > +      pool:
> > +        description:
> > +          Indicates that the particular reserved SRAM area is addressable
> > +          and in use by another device or devices.
> > +        type: boolean
> > +
> > +      export:
> > +        description:
> > +          Indicates that the reserved SRAM area may be accessed outside
> > +          of the kernel, e.g. by bootloader or userspace.
> > +        type: boolean
> > +
> > +      protect-exec:
> > +        description: |
> > +          Same as 'pool' above but with the additional constraint that code
> > +          will be run from the region and that the memory is maintained as
> > +          read-only, executable during code execution. NOTE: This region must
> > +          be page aligned on start and end in order to properly allow
> > +          manipulation of the page attributes.
> > +        type: boolean
> > +
> > +      label:
> > +        $ref: /schemas/types.yaml#/definitions/string
> 
> Already has a type definition.

OK

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/sram/sram.txt b/Documentation/devicetree/bindings/sram/sram.txt
deleted file mode 100644
index e98908bd4227..000000000000
--- a/Documentation/devicetree/bindings/sram/sram.txt
+++ /dev/null
@@ -1,80 +0,0 @@ 
-Generic on-chip SRAM
-
-Simple IO memory regions to be managed by the genalloc API.
-
-Required properties:
-
-- compatible : mmio-sram or atmel,sama5d2-securam
-
-- reg : SRAM iomem address range
-
-Reserving sram areas:
----------------------
-
-Each child of the sram node specifies a region of reserved memory. Each
-child node should use a 'reg' property to specify a specific range of
-reserved memory.
-
-Following the generic-names recommended practice, node names should
-reflect the purpose of the node. Unit address (@<address>) should be
-appended to the name.
-
-Required properties in the sram node:
-
-- #address-cells, #size-cells : should use the same values as the root node
-- ranges : standard definition, should translate from local addresses
-           within the sram to bus addresses
-
-Optional properties in the sram node:
-
-- no-memory-wc : the flag indicating, that SRAM memory region has not to
-                 be remapped as write combining. WC is used by default.
-
-Required properties in the area nodes:
-
-- reg : iomem address range, relative to the SRAM range
-
-Optional properties in the area nodes:
-
-- compatible : standard definition, should contain a vendor specific string
-               in the form <vendor>,[<device>-]<usage>
-- pool : indicates that the particular reserved SRAM area is addressable
-         and in use by another device or devices
-- export : indicates that the reserved SRAM area may be accessed outside
-           of the kernel, e.g. by bootloader or userspace
-- protect-exec : Same as 'pool' above but with the additional
-		 constraint that code wil be run from the region and
-		 that the memory is maintained as read-only, executable
-		 during code execution. NOTE: This region must be page
-		 aligned on start and end in order to properly allow
-		 manipulation of the page attributes.
-- label : the name for the reserved partition, if omitted, the label
-          is taken from the node name excluding the unit address.
-- clocks : a list of phandle and clock specifier pair that controls the
-	   single SRAM clock.
-
-Example:
-
-sram: sram@5c000000 {
-	compatible = "mmio-sram";
-	reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
-
-	#address-cells = <1>;
-	#size-cells = <1>;
-	ranges = <0 0x5c000000 0x40000>;
-
-	smp-sram@100 {
-		compatible = "socvendor,smp-sram";
-		reg = <0x100 0x50>;
-	};
-
-	device-sram@1000 {
-		reg = <0x1000 0x1000>;
-		pool;
-	};
-
-	exported@20000 {
-		reg = <0x20000 0x20000>;
-		export;
-	};
-};
diff --git a/Documentation/devicetree/bindings/sram/sram.yaml b/Documentation/devicetree/bindings/sram/sram.yaml
new file mode 100644
index 000000000000..8d9d6ce494b2
--- /dev/null
+++ b/Documentation/devicetree/bindings/sram/sram.yaml
@@ -0,0 +1,138 @@ 
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/sram/sram.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Generic on-chip SRAM
+
+maintainers:
+  - FIXME <who@should.it.be>
+
+description: |+
+  Simple IO memory regions to be managed by the genalloc API.
+
+  Each child of the sram node specifies a region of reserved memory. Each
+  child node should use a 'reg' property to specify a specific range of
+  reserved memory.
+
+  Following the generic-names recommended practice, node names should
+  reflect the purpose of the node. Unit address (@<address>) should be
+  appended to the name.
+
+properties:
+  $nodename:
+    pattern: "^sram(@.*)?"
+
+  compatible:
+    items:
+      - enum:
+          - mmio-sram
+          - atmel,sama5d2-securam
+
+  reg:
+    maxItems: 1
+
+  "#address-cells":
+    description: Should use the same values as the root node.
+
+  "#size-cells":
+    description: Should use the same values as the root node.
+
+  ranges:
+    description:
+      Should translate from local addresses within the sram to bus addresses.
+
+  no-memory-wc:
+    description:
+      The flag indicating, that SRAM memory region has not to be remapped
+      as write combining. WC is used by default.
+    type: boolean
+
+  # TODO: additionalProperties: false
+
+patternProperties:
+  "^([a-z]*-)?sram@[a-f0-9]$":
+    type: object
+    description:
+      Each child of the sram node specifies a region of reserved memory.
+    properties:
+      reg:
+        description:
+          IO mem address range, relative to the SRAM range.
+
+      compatible:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          Should contain a vendor specific string in the form
+          <vendor>,[<device>-]<usage>
+
+      pool:
+        description:
+          Indicates that the particular reserved SRAM area is addressable
+          and in use by another device or devices.
+        type: boolean
+
+      export:
+        description:
+          Indicates that the reserved SRAM area may be accessed outside
+          of the kernel, e.g. by bootloader or userspace.
+        type: boolean
+
+      protect-exec:
+        description: |
+          Same as 'pool' above but with the additional constraint that code
+          will be run from the region and that the memory is maintained as
+          read-only, executable during code execution. NOTE: This region must
+          be page aligned on start and end in order to properly allow
+          manipulation of the page attributes.
+        type: boolean
+
+      label:
+        $ref: /schemas/types.yaml#/definitions/string
+        description:
+          The name for the reserved partition, if omitted, the label is taken
+          from the node name excluding the unit address.
+
+      clocks:
+        description:
+          A list of phandle and clock specifier pair that controls the
+          single SRAM clock.
+
+      # TODO: additionalProperties: false
+
+    required:
+      - reg
+
+required:
+  - compatible
+  - reg
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+examples:
+  - |
+    sram: sram@5c000000 {
+        compatible = "mmio-sram";
+        reg = <0x5c000000 0x40000>; /* 256 KiB SRAM at address 0x5c000000 */
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0 0x5c000000 0x40000>;
+
+        smp-sram@100 {
+            compatible = "socvendor,smp-sram";
+            reg = <0x100 0x50>;
+        };
+
+        device-sram@1000 {
+            reg = <0x1000 0x1000>;
+            pool;
+        };
+
+        exported@20000 {
+            reg = <0x20000 0x20000>;
+            export;
+        };
+    };