diff mbox series

[v2,2/9] brcmfmac: set F2 blocksize and watermark for 4359

Message ID 20191211235253.2539-3-smoch@web.de (mailing list archive)
State New, archived
Headers show
Series brcmfmac: add support for BCM4359 SDIO chipset | expand

Commit Message

Soeren Moch Dec. 11, 2019, 11:52 p.m. UTC 
From: Chung-Hsien Hsu <stanley.hsu@cypress.com>

Set F2 blocksize to 256 bytes and watermark to 0x40 for 4359. Also
enable and configure F1 MesBusyCtrl. It fixes DMA error while having
UDP bi-directional traffic.

Signed-off-by: Chung-Hsien Hsu <stanley.hsu@cypress.com>
[slightly adapted for rebase on mainline linux]
Signed-off-by: Soeren Moch <smoch@web.de>
Reviewed-by: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
---
changes in v2:
- add review tag received for v1

Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Heiko Stuebner <heiko@sntech.de>
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-rockchip@lists.infradead.org
Cc: linux-kernel@vger.kernel.org
---
 .../wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c |  6 +++++-
 .../wireless/broadcom/brcm80211/brcmfmac/sdio.c   | 15 +++++++++++++++
 2 files changed, 20 insertions(+), 1 deletion(-)

--
2.17.1
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
index 96fd8e2bf773..68baf0189305 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcmsdh.c
@@ -43,6 +43,7 @@ 

 #define SDIO_FUNC1_BLOCKSIZE		64
 #define SDIO_FUNC2_BLOCKSIZE		512
+#define SDIO_4359_FUNC2_BLOCKSIZE	256
 /* Maximum milliseconds to wait for F2 to come up */
 #define SDIO_WAIT_F2RDY	3000

@@ -903,6 +904,7 @@  static void brcmf_sdiod_host_fixup(struct mmc_host *host)
 static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 {
 	int ret = 0;
+	unsigned int f2_blksz = SDIO_FUNC2_BLOCKSIZE;

 	sdio_claim_host(sdiodev->func1);

@@ -912,7 +914,9 @@  static int brcmf_sdiod_probe(struct brcmf_sdio_dev *sdiodev)
 		sdio_release_host(sdiodev->func1);
 		goto out;
 	}
-	ret = sdio_set_block_size(sdiodev->func2, SDIO_FUNC2_BLOCKSIZE);
+	if (sdiodev->func2->device == SDIO_DEVICE_ID_BROADCOM_4359)
+		f2_blksz = SDIO_4359_FUNC2_BLOCKSIZE;
+	ret = sdio_set_block_size(sdiodev->func2, f2_blksz);
 	if (ret) {
 		brcmf_err("Failed to set F2 blocksize\n");
 		sdio_release_host(sdiodev->func1);
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 264ad63232f8..21e535072f3f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -42,6 +42,8 @@ 
 #define DEFAULT_F2_WATERMARK    0x8
 #define CY_4373_F2_WATERMARK    0x40
 #define CY_43012_F2_WATERMARK    0x60
+#define CY_4359_F2_WATERMARK	0x40
+#define CY_4359_F1_MESBUSYCTRL	(CY_4359_F2_WATERMARK | SBSDIO_MESBUSYCTRL_ENAB)

 #ifdef DEBUG

@@ -4205,6 +4207,19 @@  static void brcmf_sdio_firmware_callback(struct device *dev, int err,
 			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
 					   &err);
 			break;
+		case SDIO_DEVICE_ID_BROADCOM_4359:
+			brcmf_dbg(INFO, "set F2 watermark to 0x%x*4 bytes\n",
+				  CY_4359_F2_WATERMARK);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
+					   CY_4359_F2_WATERMARK, &err);
+			devctl = brcmf_sdiod_readb(sdiod, SBSDIO_DEVICE_CTL,
+						   &err);
+			devctl |= SBSDIO_DEVCTL_F2WM_ENAB;
+			brcmf_sdiod_writeb(sdiod, SBSDIO_DEVICE_CTL, devctl,
+					   &err);
+			brcmf_sdiod_writeb(sdiod, SBSDIO_FUNC1_MESBUSYCTRL,
+					   CY_4359_F1_MESBUSYCTRL, &err);
+			break;
 		default:
 			brcmf_sdiod_writeb(sdiod, SBSDIO_WATERMARK,
 					   DEFAULT_F2_WATERMARK, &err);