| Message ID | 20200306210922.172346-3-heiko@sntech.de (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | [1/3] arm64: dts: rockchip: add core devicetree for rk3326 | expand |
Hi Heiko,
The 'heartbeat' led seems to need some changes. The rest is inherited
from px30.dtsi I think. How do you deal with all the compatible
properties names that are normally SoC specific?
Also include all mail lists found with:
./scripts/get_maintainer.pl --nogit-fallback --nogit
linux-kernel@vger.kernel.org
DTC arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dtb
DTC arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml
CHECK arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: tsadc:
tsadc-otp-gpio: {'rockchip,pins': [[0, 6, 0, 123]], 'phandle': [[90]]}
is not of type 'array'
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: usb@ff340000:
'clock-names', 'power-domains' do not match any of the regexes:
'pinctrl-[0-9]+'
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: usb@ff350000:
'clock-names', 'power-domains' do not match any of the regexes:
'pinctrl-[0-9]+'
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: gpio-leds:
'heartbeat' does not match any of the regexes: '(^led-[0-9a-f]$|led)',
'pinctrl-[0-9]+'
arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: usb2-phy@100:
'#phy-cells' is a required property
> From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
>
> The Odroid Advance Go is a handheld based on Rockchip's rk3326 soc
> with a DSI display and some handheld controls including an analog
> joystick connected to the saradc.
>
> Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
> ---
> arch/arm64/boot/dts/rockchip/Makefile | 1 +
> .../boot/dts/rockchip/rk3326-odroid-go2.dts | 544 ++++++++++++++++++
> 2 files changed, 545 insertions(+)
> create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
>
> diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
> index af1e1c3707d0..86c38467d487 100644
> --- a/arch/arm64/boot/dts/rockchip/Makefile
> +++ b/arch/arm64/boot/dts/rockchip/Makefile
> @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-copperhead-ltk101b4029w.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
> +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
> dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb
> diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
> new file mode 100644
> index 000000000000..a16f4a0d1d4d
> --- /dev/null
> +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts
> @@ -0,0 +1,544 @@
> +// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
> +/*
> + * Copyright (c) 2019 Hardkernel Co., Ltd
> + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
> + */
> +
> +/dts-v1/;
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/rockchip.h>
> +#include "rk3326.dtsi"
> +
> +/ {
> + model = "ODROID-GO Advance";
> + compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326";
> +
> + chosen {
> + stdout-path = "serial2:115200n8";
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&btn_pins>;
> +
> + /*
> + * *** ODROIDGO2-Advance Switch layoout ***
> + * |------------------------------------------------|
> + * | sw15 sw16 |
> + * |------------------------------------------------|
> + * | sw1 |-------------------| sw8 |
> + * | sw3 sw4 | | sw7 sw5 |
> + * | sw2 | LCD Display | sw6 |
> + * | | | |
> + * | |-------------------| |
> + * | sw9 sw10 sw11 sw12 sw13 sw14 |
> + * |------------------------------------------------|
> + */
> +
> + sw1 {
> + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>;
> + label = "DPAD-UP";
> + linux,code = <BTN_DPAD_UP>;
> + };
> + sw2 {
> + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>;
> + label = "DPAD-DOWN";
> + linux,code = <BTN_DPAD_DOWN>;
> + };
> + sw3 {
> + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>;
> + label = "DPAD-LEFT";
> + linux,code = <BTN_DPAD_LEFT>;
> + };
> + sw4 {
> + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>;
> + label = "DPAD-RIGHT";
> + linux,code = <BTN_DPAD_RIGHT>;
> + };
> + sw5 {
> + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>;
> + label = "BTN-A";
> + linux,code = <BTN_EAST>;
> + };
> + sw6 {
> + gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>;
> + label = "BTN-B";
> + linux,code = <BTN_SOUTH>;
> + };
> + sw7 {
> + gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>;
> + label = "BTN-Y";
> + linux,code = <BTN_WEST>;
> + };
> + sw8 {
> + gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>;
> + label = "BTN-X";
> + linux,code = <BTN_NORTH>;
> + };
> + sw9 {
> + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>;
> + label = "F1";
> + linux,code = <BTN_TRIGGER_HAPPY1>;
> + };
> + sw10 {
> + gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>;
> + label = "F2";
> + linux,code = <BTN_TRIGGER_HAPPY2>;
> + };
> + sw11 {
> + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>;
> + label = "F3";
> + linux,code = <BTN_TRIGGER_HAPPY3>;
> + };
> + sw12 {
> + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>;
> + label = "F4";
> + linux,code = <BTN_TRIGGER_HAPPY4>;
> + };
> + sw13 {
> + gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>;
> + label = "F5";
> + linux,code = <BTN_TRIGGER_HAPPY5>;
> + };
> + sw14 {
> + gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>;
> + label = "F6";
> + linux,code = <BTN_TRIGGER_HAPPY6>;
> + };
> + sw15 {
> + gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>;
> + label = "TOP-LEFT";
> + linux,code = <BTN_TL>;
> + };
> + sw16 {
> + gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>;
> + label = "TOP-RIGHT";
> + linux,code = <BTN_TR>;
> + };
> + };
> +
> + leds: gpio-leds {
> + compatible = "gpio-leds";
> + pinctrl-names = "led_pins";
> + pinctrl-0 = <&led_pins>;
> +
> + /* Blue LED : GPIO0_C1 */
> + heartbeat {
> + label = "blue:heartbeat";
> + gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>;
> + linux,default-trigger = "heartbeat";
> + };
> + };
> +
> + backlight: backlight {
> + compatible = "pwm-backlight";
> + power-supply = <&vcc_bl>;
> + pwms = <&pwm1 0 25000 0>;
> + };
sort nodenames
> +
> + vccsys: vccsys {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc3v8_sys";
> + regulator-always-on;
> + regulator-min-microvolt = <3800000>;
> + regulator-max-microvolt = <3800000>;
> + };
> +
> + vcc_host: vcc_host {
> + compatible = "regulator-fixed";
> + regulator-name = "vcc_host";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> +
> + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + regulator-always-on;
> + vin-supply = <&vccsys>;
> + };
> +};
> +
> +&cpu0 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu1 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu2 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cpu3 {
> + cpu-supply = <&vdd_arm>;
> +};
> +
> +&cru {
> + assigned-clocks = <&cru PLL_NPLL>,
> + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>,
> + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>,
> + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>,
> + <&cru PLL_CPLL>;
> +
> + assigned-clock-rates = <1188000000>,
> + <200000000>, <200000000>,
> + <150000000>, <150000000>,
> + <100000000>, <200000000>,
> + <17000000>;
> +};
> +
> +&display_subsystem {
> + status = "okay";
> +};
> +
> +&dsi {
> + status = "okay";
> +
> + ports {
> + mipi_out: port@1 {
> + reg = <1>;
> +
> + mipi_out_panel: endpoint {
> + remote-endpoint = <&mipi_in_panel>;
> + };
> + };
> + };
> +
> + panel@0 {
> + compatible = "elida,kd35t133";
> + reg = <0>;
> + backlight = <&backlight>;
> + iovcc-supply = <&vcc_lcd>;
> + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>;
> + vdd-supply = <&vcc_lcd>;
> +
> + port {
> + mipi_in_panel: endpoint {
> + remote-endpoint = <&mipi_out_panel>;
> + };
> + };
> + };
> +};
> +
> +&dsi_dphy {
> + status = "okay";
> +};
> +
> +&gpu {
> + mali-supply = <&vdd_logic>;
> + status = "okay";
> +};
> +
> +&i2c0 {
> + status = "okay";
status below
> + clock-frequency = <400000>;
> + i2c-scl-rising-time-ns = <280>;
> + i2c-scl-falling-time-ns = <16>;
sort
> +
> + rk817: pmic@20 {
> + compatible = "rockchip,rk817";
> + reg = <0x20>;
> + interrupt-parent = <&gpio0>;
> + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pmic_int>;
> + rockchip,system-power-controller;
> + wakeup-source;
> + #clock-cells = <1>;
> + clock-output-names = "rk808-clkout1", "xin32k";
> +
> + vcc1-supply = <&vccsys>;
> + vcc2-supply = <&vccsys>;
> + vcc3-supply = <&vccsys>;
> + vcc4-supply = <&vccsys>;
> + vcc5-supply = <&vccsys>;
> + vcc6-supply = <&vccsys>;
> + vcc7-supply = <&vccsys>;
> +
> + regulators {
> + vdd_logic: DCDC_REG1 {
> + regulator-name = "vdd_logic";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1150000>;
> + regulator-ramp-delay = <6001>;
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <950000>;
> + };
> + };
> +
> + vdd_arm: DCDC_REG2 {
> + regulator-name = "vdd_arm";
> + regulator-min-microvolt = <950000>;
> + regulator-max-microvolt = <1350000>;
> + regulator-ramp-delay = <6001>;
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <950000>;
> + };
> + };
> +
> + vcc_ddr: DCDC_REG3 {
> + regulator-name = "vcc_ddr";
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + };
> + };
> +
> + vcc_3v3: DCDC_REG4 {
> + regulator-name = "vcc_3v3";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_1v8: LDO_REG2 {
> + regulator-name = "vcc_1v8";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1800000>;
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1800000>;
> + };
> + };
> +
> + vdd_1v0: LDO_REG3 {
> + regulator-name = "vdd_1v0";
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1000000>;
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <1000000>;
> + };
> + };
> +
> + vcc3v3_pmu: LDO_REG4 {
> + regulator-name = "vcc3v3_pmu";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vccio_sd: LDO_REG5 {
> + regulator-name = "vccio_sd";
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-always-on;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_sd: LDO_REG6 {
> + regulator-name = "vcc_sd";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> + regulator-boot-on;
> +
> + regulator-state-mem {
> + regulator-on-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_bl: LDO_REG7 {
> + regulator-name = "vcc_bl";
> + regulator-min-microvolt = <3300000>;
> + regulator-max-microvolt = <3300000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <3300000>;
> + };
> + };
> +
> + vcc_lcd: LDO_REG8 {
> + regulator-name = "vcc_lcd";
> + regulator-min-microvolt = <2800000>;
> + regulator-max-microvolt = <2800000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <2800000>;
> + };
> + };
> +
> + vcc_cam: LDO_REG9 {
> + regulator-name = "vcc_cam";
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3000000>;
> +
> + regulator-state-mem {
> + regulator-off-in-suspend;
> + regulator-suspend-microvolt = <3000000>;
> + };
> + };
> + };
> + };
> +};
> +
> +/* EXT Header(P2) : 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */
> +&i2c1 {
> + status = "okay";
status below
> + clock-frequency = <400000>;
> +};
> +
> +/* I2S 1 Channel Used */
> +&i2s1_2ch {
> + status = "okay";
status below
> + #sound-dai-cells = <0>;
> +};
> +
> +&io_domains {
> + vccio1-supply = <&vcc_3v3>;
> + vccio2-supply = <&vccio_sd>;
> + vccio3-supply = <&vcc_3v3>;
> + vccio4-supply = <&vcc_3v3>;
> + vccio5-supply = <&vcc_3v3>;
> + vccio6-supply = <&vcc_3v3>;
> + status = "okay";
> +};
> +
> +&pmu_io_domains {
> + pmuio1-supply = <&vcc3v3_pmu>;
> + pmuio2-supply = <&vcc3v3_pmu>;
> + status = "okay";
> +};
> +
> +&pwm1 {
> + status = "okay";
> +};
> +
> +&saradc {
> + vref-supply = <&vcc_1v8>;
> + status = "okay";
> +};
> +
> +&sdmmc {
> + bus-width = <4>;
> + cap-sd-highspeed;
> + card-detect-delay = <800>;
Other dts use 200. Why we need 800?
> + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>;
> + sd-uhs-sdr12;
> + sd-uhs-sdr25;
> + sd-uhs-sdr50;
> + sd-uhs-sdr104;
> + vmmc-supply = <&vcc_sd>;
> + vqmmc-supply = <&vccio_sd>;
> + status = "okay";
> +};
> +
> +&tsadc {
> + pinctrl-names = "gpio", "otpout";
> + pinctrl-0 = <&tsadc_otp_gpio>;
> + pinctrl-1 = <&tsadc_otp_out>;
> + status = "okay";
> +};
> +
> +&u2phy {
> + status = "okay";
> +
> + u2phy_host: host-port {
> + status = "okay";
> + };
> +
> + u2phy_otg: otg-port {
> + status = "disabled";
> + };
> +};
> +
> +&usb20_otg {
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart1_xfer &uart1_cts>;
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&uart2m1_xfer>;
> + status = "okay";
> +};
> +
> +&vopb {
> + status = "okay";
> +};
> +
> +&vopb_mmu {
> + status = "okay";
> +};
> +
> +&pinctrl {
> + pmic {
> + pmic_int: pmic-int {
> + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> +
> + dc_det: dc-det {
> + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + leds {
> + led_pins: led-pins {
> + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>;
> + };
> + };
> +
> + btns {
> + btn_pins: btn-pins {
> + rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
> + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
> + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
> + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
> + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
> + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
> + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
> + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
> +
> + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
> + <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
> + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
> + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
> + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
> + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
> + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
> + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>;
> + };
> + };
> +};
> --
> 2.24.1
Hi Johan, Am Samstag, 7. März 2020, 09:36:19 CET schrieb Johan Jonker: > The 'heartbeat' led seems to need some changes. The rest is inherited > from px30.dtsi I think. How do you deal with all the compatible > properties names that are normally SoC specific? The rk3326 really is just a px30 with the little vop deactivated. So I really don't want to make "much fuss" over that ;-) Previous iterations where the arm32 px3/px3se/etc which essentially also just copied an existing soc and added some industrial voodoo to the chip itself (temperature range or whatever). And thanks for making sure the details are right below. I'll do a v2 with these things corrected. Thanks Heiko > Also include all mail lists found with: > ./scripts/get_maintainer.pl --nogit-fallback --nogit > > linux-kernel@vger.kernel.org > > DTC arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dtb > DTC arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml > CHECK arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml > arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: tsadc: > tsadc-otp-gpio: {'rockchip,pins': [[0, 6, 0, 123]], 'phandle': [[90]]} > is not of type 'array' > arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: usb@ff340000: > 'clock-names', 'power-domains' do not match any of the regexes: > 'pinctrl-[0-9]+' > arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: usb@ff300000: > 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+' > arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: usb@ff350000: > 'clock-names', 'power-domains' do not match any of the regexes: > 'pinctrl-[0-9]+' > arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: gpio-leds: > 'heartbeat' does not match any of the regexes: '(^led-[0-9a-f]$|led)', > 'pinctrl-[0-9]+' > arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dt.yaml: usb2-phy@100: > '#phy-cells' is a required property > > > From: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> > > > > The Odroid Advance Go is a handheld based on Rockchip's rk3326 soc > > with a DSI display and some handheld controls including an analog > > joystick connected to the saradc. > > > > Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com> > > --- > > arch/arm64/boot/dts/rockchip/Makefile | 1 + > > .../boot/dts/rockchip/rk3326-odroid-go2.dts | 544 ++++++++++++++++++ > > 2 files changed, 545 insertions(+) > > create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts > > > > diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile > > index af1e1c3707d0..86c38467d487 100644 > > --- a/arch/arm64/boot/dts/rockchip/Makefile > > +++ b/arch/arm64/boot/dts/rockchip/Makefile > > @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-copperhead-ltk101b4029w.dtb > > dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb > > +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb > > dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb > > diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts > > new file mode 100644 > > index 000000000000..a16f4a0d1d4d > > --- /dev/null > > +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts > > @@ -0,0 +1,544 @@ > > +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) > > +/* > > + * Copyright (c) 2019 Hardkernel Co., Ltd > > + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH > > + */ > > + > > +/dts-v1/; > > +#include <dt-bindings/gpio/gpio.h> > > +#include <dt-bindings/input/input.h> > > +#include <dt-bindings/pinctrl/rockchip.h> > > +#include "rk3326.dtsi" > > + > > +/ { > > + model = "ODROID-GO Advance"; > > + compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326"; > > + > > + chosen { > > + stdout-path = "serial2:115200n8"; > > + }; > > + > > + gpio-keys { > > + compatible = "gpio-keys"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&btn_pins>; > > + > > + /* > > + * *** ODROIDGO2-Advance Switch layoout *** > > + * |------------------------------------------------| > > + * | sw15 sw16 | > > + * |------------------------------------------------| > > + * | sw1 |-------------------| sw8 | > > + * | sw3 sw4 | | sw7 sw5 | > > + * | sw2 | LCD Display | sw6 | > > + * | | | | > > + * | |-------------------| | > > + * | sw9 sw10 sw11 sw12 sw13 sw14 | > > + * |------------------------------------------------| > > + */ > > + > > + sw1 { > > + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; > > + label = "DPAD-UP"; > > + linux,code = <BTN_DPAD_UP>; > > + }; > > + sw2 { > > + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; > > + label = "DPAD-DOWN"; > > + linux,code = <BTN_DPAD_DOWN>; > > + }; > > + sw3 { > > + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; > > + label = "DPAD-LEFT"; > > + linux,code = <BTN_DPAD_LEFT>; > > + }; > > + sw4 { > > + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; > > + label = "DPAD-RIGHT"; > > + linux,code = <BTN_DPAD_RIGHT>; > > + }; > > + sw5 { > > + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; > > + label = "BTN-A"; > > + linux,code = <BTN_EAST>; > > + }; > > + sw6 { > > + gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; > > + label = "BTN-B"; > > + linux,code = <BTN_SOUTH>; > > + }; > > + sw7 { > > + gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; > > + label = "BTN-Y"; > > + linux,code = <BTN_WEST>; > > + }; > > + sw8 { > > + gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; > > + label = "BTN-X"; > > + linux,code = <BTN_NORTH>; > > + }; > > + sw9 { > > + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; > > + label = "F1"; > > + linux,code = <BTN_TRIGGER_HAPPY1>; > > + }; > > + sw10 { > > + gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; > > + label = "F2"; > > + linux,code = <BTN_TRIGGER_HAPPY2>; > > + }; > > + sw11 { > > + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; > > + label = "F3"; > > + linux,code = <BTN_TRIGGER_HAPPY3>; > > + }; > > + sw12 { > > + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; > > + label = "F4"; > > + linux,code = <BTN_TRIGGER_HAPPY4>; > > + }; > > + sw13 { > > + gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; > > + label = "F5"; > > + linux,code = <BTN_TRIGGER_HAPPY5>; > > + }; > > + sw14 { > > + gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; > > + label = "F6"; > > + linux,code = <BTN_TRIGGER_HAPPY6>; > > + }; > > + sw15 { > > + gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; > > + label = "TOP-LEFT"; > > + linux,code = <BTN_TL>; > > + }; > > + sw16 { > > + gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; > > + label = "TOP-RIGHT"; > > + linux,code = <BTN_TR>; > > + }; > > + }; > > + > > + leds: gpio-leds { > > + compatible = "gpio-leds"; > > + pinctrl-names = "led_pins"; > > + pinctrl-0 = <&led_pins>; > > + > > + /* Blue LED : GPIO0_C1 */ > > + heartbeat { > > + label = "blue:heartbeat"; > > + gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; > > + linux,default-trigger = "heartbeat"; > > + }; > > + }; > > + > > > + backlight: backlight { > > + compatible = "pwm-backlight"; > > + power-supply = <&vcc_bl>; > > + pwms = <&pwm1 0 25000 0>; > > + }; > > sort nodenames > > > + > > + vccsys: vccsys { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc3v8_sys"; > > + regulator-always-on; > > + regulator-min-microvolt = <3800000>; > > + regulator-max-microvolt = <3800000>; > > + }; > > + > > + vcc_host: vcc_host { > > + compatible = "regulator-fixed"; > > + regulator-name = "vcc_host"; > > + regulator-min-microvolt = <5000000>; > > + regulator-max-microvolt = <5000000>; > > + > > + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; > > + enable-active-high; > > + regulator-always-on; > > + vin-supply = <&vccsys>; > > + }; > > +}; > > + > > +&cpu0 { > > + cpu-supply = <&vdd_arm>; > > +}; > > + > > +&cpu1 { > > + cpu-supply = <&vdd_arm>; > > +}; > > + > > +&cpu2 { > > + cpu-supply = <&vdd_arm>; > > +}; > > + > > +&cpu3 { > > + cpu-supply = <&vdd_arm>; > > +}; > > + > > +&cru { > > + assigned-clocks = <&cru PLL_NPLL>, > > + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, > > + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, > > + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, > > + <&cru PLL_CPLL>; > > + > > + assigned-clock-rates = <1188000000>, > > + <200000000>, <200000000>, > > + <150000000>, <150000000>, > > + <100000000>, <200000000>, > > + <17000000>; > > +}; > > + > > +&display_subsystem { > > + status = "okay"; > > +}; > > + > > +&dsi { > > + status = "okay"; > > + > > + ports { > > + mipi_out: port@1 { > > + reg = <1>; > > + > > + mipi_out_panel: endpoint { > > + remote-endpoint = <&mipi_in_panel>; > > + }; > > + }; > > + }; > > + > > + panel@0 { > > + compatible = "elida,kd35t133"; > > + reg = <0>; > > + backlight = <&backlight>; > > + iovcc-supply = <&vcc_lcd>; > > + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; > > + vdd-supply = <&vcc_lcd>; > > + > > + port { > > + mipi_in_panel: endpoint { > > + remote-endpoint = <&mipi_out_panel>; > > + }; > > + }; > > + }; > > +}; > > + > > +&dsi_dphy { > > + status = "okay"; > > +}; > > + > > +&gpu { > > + mali-supply = <&vdd_logic>; > > + status = "okay"; > > +}; > > + > > +&i2c0 { > > > + status = "okay"; > > status below > > > + clock-frequency = <400000>; > > > + i2c-scl-rising-time-ns = <280>; > > + i2c-scl-falling-time-ns = <16>; > > sort > > > + > > + rk817: pmic@20 { > > + compatible = "rockchip,rk817"; > > + reg = <0x20>; > > + interrupt-parent = <&gpio0>; > > + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&pmic_int>; > > + rockchip,system-power-controller; > > + wakeup-source; > > + #clock-cells = <1>; > > + clock-output-names = "rk808-clkout1", "xin32k"; > > + > > + vcc1-supply = <&vccsys>; > > + vcc2-supply = <&vccsys>; > > + vcc3-supply = <&vccsys>; > > + vcc4-supply = <&vccsys>; > > + vcc5-supply = <&vccsys>; > > + vcc6-supply = <&vccsys>; > > + vcc7-supply = <&vccsys>; > > + > > + regulators { > > + vdd_logic: DCDC_REG1 { > > + regulator-name = "vdd_logic"; > > + regulator-min-microvolt = <950000>; > > + regulator-max-microvolt = <1150000>; > > + regulator-ramp-delay = <6001>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <950000>; > > + }; > > + }; > > + > > + vdd_arm: DCDC_REG2 { > > + regulator-name = "vdd_arm"; > > + regulator-min-microvolt = <950000>; > > + regulator-max-microvolt = <1350000>; > > + regulator-ramp-delay = <6001>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <950000>; > > + }; > > + }; > > + > > + vcc_ddr: DCDC_REG3 { > > + regulator-name = "vcc_ddr"; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + }; > > + }; > > + > > + vcc_3v3: DCDC_REG4 { > > + regulator-name = "vcc_3v3"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vcc_1v8: LDO_REG2 { > > + regulator-name = "vcc_1v8"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <1800000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <1800000>; > > + }; > > + }; > > + > > + vdd_1v0: LDO_REG3 { > > + regulator-name = "vdd_1v0"; > > + regulator-min-microvolt = <1000000>; > > + regulator-max-microvolt = <1000000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <1000000>; > > + }; > > + }; > > + > > + vcc3v3_pmu: LDO_REG4 { > > + regulator-name = "vcc3v3_pmu"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vccio_sd: LDO_REG5 { > > + regulator-name = "vccio_sd"; > > + regulator-min-microvolt = <1800000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-always-on; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vcc_sd: LDO_REG6 { > > + regulator-name = "vcc_sd"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + regulator-boot-on; > > + > > + regulator-state-mem { > > + regulator-on-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vcc_bl: LDO_REG7 { > > + regulator-name = "vcc_bl"; > > + regulator-min-microvolt = <3300000>; > > + regulator-max-microvolt = <3300000>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <3300000>; > > + }; > > + }; > > + > > + vcc_lcd: LDO_REG8 { > > + regulator-name = "vcc_lcd"; > > + regulator-min-microvolt = <2800000>; > > + regulator-max-microvolt = <2800000>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <2800000>; > > + }; > > + }; > > + > > + vcc_cam: LDO_REG9 { > > + regulator-name = "vcc_cam"; > > + regulator-min-microvolt = <3000000>; > > + regulator-max-microvolt = <3000000>; > > + > > + regulator-state-mem { > > + regulator-off-in-suspend; > > + regulator-suspend-microvolt = <3000000>; > > + }; > > + }; > > + }; > > + }; > > +}; > > + > > +/* EXT Header(P2) : 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */ > > +&i2c1 { > > > + status = "okay"; > > status below > > > + clock-frequency = <400000>; > > +}; > > + > > +/* I2S 1 Channel Used */ > > +&i2s1_2ch { > > > + status = "okay"; > > status below > > > + #sound-dai-cells = <0>; > > +}; > > + > > +&io_domains { > > + vccio1-supply = <&vcc_3v3>; > > + vccio2-supply = <&vccio_sd>; > > + vccio3-supply = <&vcc_3v3>; > > + vccio4-supply = <&vcc_3v3>; > > + vccio5-supply = <&vcc_3v3>; > > + vccio6-supply = <&vcc_3v3>; > > + status = "okay"; > > +}; > > + > > +&pmu_io_domains { > > + pmuio1-supply = <&vcc3v3_pmu>; > > + pmuio2-supply = <&vcc3v3_pmu>; > > + status = "okay"; > > +}; > > + > > +&pwm1 { > > + status = "okay"; > > +}; > > + > > +&saradc { > > + vref-supply = <&vcc_1v8>; > > + status = "okay"; > > +}; > > + > > +&sdmmc { > > + bus-width = <4>; > > + cap-sd-highspeed; > > > + card-detect-delay = <800>; > > Other dts use 200. Why we need 800? > > > + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; > > + sd-uhs-sdr12; > > + sd-uhs-sdr25; > > + sd-uhs-sdr50; > > + sd-uhs-sdr104; > > + vmmc-supply = <&vcc_sd>; > > + vqmmc-supply = <&vccio_sd>; > > + status = "okay"; > > +}; > > + > > +&tsadc { > > + pinctrl-names = "gpio", "otpout"; > > + pinctrl-0 = <&tsadc_otp_gpio>; > > + pinctrl-1 = <&tsadc_otp_out>; > > + status = "okay"; > > +}; > > + > > +&u2phy { > > + status = "okay"; > > + > > + u2phy_host: host-port { > > + status = "okay"; > > + }; > > + > > + u2phy_otg: otg-port { > > + status = "disabled"; > > + }; > > +}; > > + > > +&usb20_otg { > > + status = "okay"; > > +}; > > + > > +&uart1 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart1_xfer &uart1_cts>; > > + status = "okay"; > > +}; > > + > > +&uart2 { > > + pinctrl-names = "default"; > > + pinctrl-0 = <&uart2m1_xfer>; > > + status = "okay"; > > +}; > > + > > +&vopb { > > + status = "okay"; > > +}; > > + > > +&vopb_mmu { > > + status = "okay"; > > +}; > > + > > +&pinctrl { > > + pmic { > > + pmic_int: pmic-int { > > + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; > > + }; > > + > > + dc_det: dc-det { > > + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; > > + }; > > + }; > > + > > + leds { > > + led_pins: led-pins { > > + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; > > + }; > > + }; > > + > > + btns { > > + btn_pins: btn-pins { > > + rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, > > + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, > > + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, > > + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, > > + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, > > + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, > > + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, > > + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, > > + > > + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, > > + <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, > > + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, > > + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, > > + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, > > + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, > > + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, > > + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; > > + }; > > + }; > > +}; > > -- > > 2.24.1 > > >
diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index af1e1c3707d0..86c38467d487 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -6,6 +6,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-copperhead-ltk101b4029w.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-rock64.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts new file mode 100644 index 000000000000..a16f4a0d1d4d --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go2.dts @@ -0,0 +1,544 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2019 Hardkernel Co., Ltd + * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH + */ + +/dts-v1/; +#include <dt-bindings/gpio/gpio.h> +#include <dt-bindings/input/input.h> +#include <dt-bindings/pinctrl/rockchip.h> +#include "rk3326.dtsi" + +/ { + model = "ODROID-GO Advance"; + compatible = "hardkernel,rk3326-odroid-go2", "rockchip,rk3326"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + gpio-keys { + compatible = "gpio-keys"; + pinctrl-names = "default"; + pinctrl-0 = <&btn_pins>; + + /* + * *** ODROIDGO2-Advance Switch layoout *** + * |------------------------------------------------| + * | sw15 sw16 | + * |------------------------------------------------| + * | sw1 |-------------------| sw8 | + * | sw3 sw4 | | sw7 sw5 | + * | sw2 | LCD Display | sw6 | + * | | | | + * | |-------------------| | + * | sw9 sw10 sw11 sw12 sw13 sw14 | + * |------------------------------------------------| + */ + + sw1 { + gpios = <&gpio1 RK_PB4 GPIO_ACTIVE_LOW>; + label = "DPAD-UP"; + linux,code = <BTN_DPAD_UP>; + }; + sw2 { + gpios = <&gpio1 RK_PB5 GPIO_ACTIVE_LOW>; + label = "DPAD-DOWN"; + linux,code = <BTN_DPAD_DOWN>; + }; + sw3 { + gpios = <&gpio1 RK_PB6 GPIO_ACTIVE_LOW>; + label = "DPAD-LEFT"; + linux,code = <BTN_DPAD_LEFT>; + }; + sw4 { + gpios = <&gpio1 RK_PB7 GPIO_ACTIVE_LOW>; + label = "DPAD-RIGHT"; + linux,code = <BTN_DPAD_RIGHT>; + }; + sw5 { + gpios = <&gpio1 RK_PA2 GPIO_ACTIVE_LOW>; + label = "BTN-A"; + linux,code = <BTN_EAST>; + }; + sw6 { + gpios = <&gpio1 RK_PA5 GPIO_ACTIVE_LOW>; + label = "BTN-B"; + linux,code = <BTN_SOUTH>; + }; + sw7 { + gpios = <&gpio1 RK_PA6 GPIO_ACTIVE_LOW>; + label = "BTN-Y"; + linux,code = <BTN_WEST>; + }; + sw8 { + gpios = <&gpio1 RK_PA7 GPIO_ACTIVE_LOW>; + label = "BTN-X"; + linux,code = <BTN_NORTH>; + }; + sw9 { + gpios = <&gpio2 RK_PA0 GPIO_ACTIVE_LOW>; + label = "F1"; + linux,code = <BTN_TRIGGER_HAPPY1>; + }; + sw10 { + gpios = <&gpio2 RK_PA1 GPIO_ACTIVE_LOW>; + label = "F2"; + linux,code = <BTN_TRIGGER_HAPPY2>; + }; + sw11 { + gpios = <&gpio2 RK_PA2 GPIO_ACTIVE_LOW>; + label = "F3"; + linux,code = <BTN_TRIGGER_HAPPY3>; + }; + sw12 { + gpios = <&gpio2 RK_PA3 GPIO_ACTIVE_LOW>; + label = "F4"; + linux,code = <BTN_TRIGGER_HAPPY4>; + }; + sw13 { + gpios = <&gpio2 RK_PA4 GPIO_ACTIVE_LOW>; + label = "F5"; + linux,code = <BTN_TRIGGER_HAPPY5>; + }; + sw14 { + gpios = <&gpio2 RK_PA5 GPIO_ACTIVE_LOW>; + label = "F6"; + linux,code = <BTN_TRIGGER_HAPPY6>; + }; + sw15 { + gpios = <&gpio2 RK_PA6 GPIO_ACTIVE_LOW>; + label = "TOP-LEFT"; + linux,code = <BTN_TL>; + }; + sw16 { + gpios = <&gpio2 RK_PA7 GPIO_ACTIVE_LOW>; + label = "TOP-RIGHT"; + linux,code = <BTN_TR>; + }; + }; + + leds: gpio-leds { + compatible = "gpio-leds"; + pinctrl-names = "led_pins"; + pinctrl-0 = <&led_pins>; + + /* Blue LED : GPIO0_C1 */ + heartbeat { + label = "blue:heartbeat"; + gpios = <&gpio0 RK_PC1 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + backlight: backlight { + compatible = "pwm-backlight"; + power-supply = <&vcc_bl>; + pwms = <&pwm1 0 25000 0>; + }; + + vccsys: vccsys { + compatible = "regulator-fixed"; + regulator-name = "vcc3v8_sys"; + regulator-always-on; + regulator-min-microvolt = <3800000>; + regulator-max-microvolt = <3800000>; + }; + + vcc_host: vcc_host { + compatible = "regulator-fixed"; + regulator-name = "vcc_host"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + + gpio = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + enable-active-high; + regulator-always-on; + vin-supply = <&vccsys>; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_arm>; +}; + +&cpu1 { + cpu-supply = <&vdd_arm>; +}; + +&cpu2 { + cpu-supply = <&vdd_arm>; +}; + +&cpu3 { + cpu-supply = <&vdd_arm>; +}; + +&cru { + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>, + <&cru PLL_CPLL>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>, + <17000000>; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi { + status = "okay"; + + ports { + mipi_out: port@1 { + reg = <1>; + + mipi_out_panel: endpoint { + remote-endpoint = <&mipi_in_panel>; + }; + }; + }; + + panel@0 { + compatible = "elida,kd35t133"; + reg = <0>; + backlight = <&backlight>; + iovcc-supply = <&vcc_lcd>; + reset-gpios = <&gpio3 RK_PC0 GPIO_ACTIVE_LOW>; + vdd-supply = <&vcc_lcd>; + + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; + }; + }; + }; +}; + +&dsi_dphy { + status = "okay"; +}; + +&gpu { + mali-supply = <&vdd_logic>; + status = "okay"; +}; + +&i2c0 { + status = "okay"; + clock-frequency = <400000>; + i2c-scl-rising-time-ns = <280>; + i2c-scl-falling-time-ns = <16>; + + rk817: pmic@20 { + compatible = "rockchip,rk817"; + reg = <0x20>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB2 IRQ_TYPE_LEVEL_LOW>; + pinctrl-names = "default"; + pinctrl-0 = <&pmic_int>; + rockchip,system-power-controller; + wakeup-source; + #clock-cells = <1>; + clock-output-names = "rk808-clkout1", "xin32k"; + + vcc1-supply = <&vccsys>; + vcc2-supply = <&vccsys>; + vcc3-supply = <&vccsys>; + vcc4-supply = <&vccsys>; + vcc5-supply = <&vccsys>; + vcc6-supply = <&vccsys>; + vcc7-supply = <&vccsys>; + + regulators { + vdd_logic: DCDC_REG1 { + regulator-name = "vdd_logic"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1150000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vdd_arm: DCDC_REG2 { + regulator-name = "vdd_arm"; + regulator-min-microvolt = <950000>; + regulator-max-microvolt = <1350000>; + regulator-ramp-delay = <6001>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <950000>; + }; + }; + + vcc_ddr: DCDC_REG3 { + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + }; + }; + + vcc_3v3: DCDC_REG4 { + regulator-name = "vcc_3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_1v8: LDO_REG2 { + regulator-name = "vcc_1v8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1800000>; + }; + }; + + vdd_1v0: LDO_REG3 { + regulator-name = "vdd_1v0"; + regulator-min-microvolt = <1000000>; + regulator-max-microvolt = <1000000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <1000000>; + }; + }; + + vcc3v3_pmu: LDO_REG4 { + regulator-name = "vcc3v3_pmu"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vccio_sd: LDO_REG5 { + regulator-name = "vccio_sd"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_sd: LDO_REG6 { + regulator-name = "vcc_sd"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + + regulator-state-mem { + regulator-on-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_bl: LDO_REG7 { + regulator-name = "vcc_bl"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3300000>; + }; + }; + + vcc_lcd: LDO_REG8 { + regulator-name = "vcc_lcd"; + regulator-min-microvolt = <2800000>; + regulator-max-microvolt = <2800000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <2800000>; + }; + }; + + vcc_cam: LDO_REG9 { + regulator-name = "vcc_cam"; + regulator-min-microvolt = <3000000>; + regulator-max-microvolt = <3000000>; + + regulator-state-mem { + regulator-off-in-suspend; + regulator-suspend-microvolt = <3000000>; + }; + }; + }; + }; +}; + +/* EXT Header(P2) : 7(SCL:GPIO0.C2), 8(SDA:GPIO0.C3) */ +&i2c1 { + status = "okay"; + clock-frequency = <400000>; +}; + +/* I2S 1 Channel Used */ +&i2s1_2ch { + status = "okay"; + #sound-dai-cells = <0>; +}; + +&io_domains { + vccio1-supply = <&vcc_3v3>; + vccio2-supply = <&vccio_sd>; + vccio3-supply = <&vcc_3v3>; + vccio4-supply = <&vcc_3v3>; + vccio5-supply = <&vcc_3v3>; + vccio6-supply = <&vcc_3v3>; + status = "okay"; +}; + +&pmu_io_domains { + pmuio1-supply = <&vcc3v3_pmu>; + pmuio2-supply = <&vcc3v3_pmu>; + status = "okay"; +}; + +&pwm1 { + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +&sdmmc { + bus-width = <4>; + cap-sd-highspeed; + card-detect-delay = <800>; + cd-gpios = <&gpio0 RK_PA3 GPIO_ACTIVE_LOW>; + sd-uhs-sdr12; + sd-uhs-sdr25; + sd-uhs-sdr50; + sd-uhs-sdr104; + vmmc-supply = <&vcc_sd>; + vqmmc-supply = <&vccio_sd>; + status = "okay"; +}; + +&tsadc { + pinctrl-names = "gpio", "otpout"; + pinctrl-0 = <&tsadc_otp_gpio>; + pinctrl-1 = <&tsadc_otp_out>; + status = "okay"; +}; + +&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "disabled"; + }; +}; + +&usb20_otg { + status = "okay"; +}; + +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts>; + status = "okay"; +}; + +&uart2 { + pinctrl-names = "default"; + pinctrl-0 = <&uart2m1_xfer>; + status = "okay"; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&pinctrl { + pmic { + pmic_int: pmic-int { + rockchip,pins = <0 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>; + }; + + dc_det: dc-det { + rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_pins: led-pins { + rockchip,pins = <0 RK_PC1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + btns { + btn_pins: btn-pins { + rockchip,pins = <1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>, + + <2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>, + <2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>; + }; + }; +};