diff mbox series

[2/3] media: rockchip: Introduce driver for Rockhip's camera interface

Message ID 20200403142122.297283-3-maxime.chevallier@bootlin.com (mailing list archive)
State New, archived
Headers show
Series media: rockchip: Introduce driver for the camera interface on PX30 | expand

Commit Message

Maxime Chevallier April 3, 2020, 2:21 p.m. UTC
Introduce a driver for the camera interface on some Rockchip platforms.

This controller supports CSI2, Parallel and BT656 interfaces, but for
now only the parallel interface could be tested, hence it's the only one
that's supported in the first version of this driver.

This controller can be fond on PX30, RK1808, RK3128, RK3288 and RK3288,
but for now it's only be tested on PX30.

Most of this driver was written follwing the BSP driver from rockchip,
removing the parts that either didn't fit correctly the guidelines, or
that couldn't be tested.

This basic version doesn't support cropping nor scaling, and is only
designed with one sensor being attached to it a any time.

Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
---
 drivers/media/platform/Kconfig                |   13 +
 drivers/media/platform/Makefile               |    1 +
 drivers/media/platform/rockchip/cif/Makefile  |    3 +
 drivers/media/platform/rockchip/cif/capture.c | 1170 +++++++++++++++++
 drivers/media/platform/rockchip/cif/dev.c     |  407 ++++++
 drivers/media/platform/rockchip/cif/dev.h     |  208 +++
 drivers/media/platform/rockchip/cif/regs.h    |  256 ++++
 7 files changed, 2058 insertions(+)
 create mode 100644 drivers/media/platform/rockchip/cif/Makefile
 create mode 100644 drivers/media/platform/rockchip/cif/capture.c
 create mode 100644 drivers/media/platform/rockchip/cif/dev.c
 create mode 100644 drivers/media/platform/rockchip/cif/dev.h
 create mode 100644 drivers/media/platform/rockchip/cif/regs.h

Comments

Hans Verkuil April 16, 2020, 9:35 a.m. UTC | #1
+Helen Koike (rkisp1 maintainer)

A quick review below...

On 03/04/2020 16:21, Maxime Chevallier wrote:
> Introduce a driver for the camera interface on some Rockchip platforms.
> 
> This controller supports CSI2, Parallel and BT656 interfaces, but for
> now only the parallel interface could be tested, hence it's the only one
> that's supported in the first version of this driver.
> 
> This controller can be fond on PX30, RK1808, RK3128, RK3288 and RK3288,

fond -> found

'RK3288 and RK3288'? Typo?

> but for now it's only be tested on PX30.
> 
> Most of this driver was written follwing the BSP driver from rockchip,

follwing -> following

> removing the parts that either didn't fit correctly the guidelines, or
> that couldn't be tested.
> 
> This basic version doesn't support cropping nor scaling, and is only
> designed with one sensor being attached to it a any time.

a any -> at any

Make sure you test with v4l2-compliance, in fact, I need to see the output
of 'v4l2-compliance -s' when you post v2. There shouldn't be any warnings
or fails. Make sure you build v4l2-compliance from the git repo
(https://git.linuxtv.org//v4l-utils.git) directly, that ensures that you
use the latest and greatest version.

How does this driver compare to drivers/staging/media/rkisp1? Is the ISP
hardware completely different (it probably is, just checking)?

How complex is the ISP hardware? This driver is a regular video driver,
but should it move to a media controller based driver instead, like rkisp1?

I don't know the hardware, so I can't tell.

> 
> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
> ---
>  drivers/media/platform/Kconfig                |   13 +
>  drivers/media/platform/Makefile               |    1 +
>  drivers/media/platform/rockchip/cif/Makefile  |    3 +
>  drivers/media/platform/rockchip/cif/capture.c | 1170 +++++++++++++++++
>  drivers/media/platform/rockchip/cif/dev.c     |  407 ++++++
>  drivers/media/platform/rockchip/cif/dev.h     |  208 +++
>  drivers/media/platform/rockchip/cif/regs.h    |  256 ++++
>  7 files changed, 2058 insertions(+)
>  create mode 100644 drivers/media/platform/rockchip/cif/Makefile
>  create mode 100644 drivers/media/platform/rockchip/cif/capture.c
>  create mode 100644 drivers/media/platform/rockchip/cif/dev.c
>  create mode 100644 drivers/media/platform/rockchip/cif/dev.h
>  create mode 100644 drivers/media/platform/rockchip/cif/regs.h
> 
> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
> index f65e98d3adf2..d2f413a99886 100644
> --- a/drivers/media/platform/Kconfig
> +++ b/drivers/media/platform/Kconfig
> @@ -460,6 +460,19 @@ config VIDEO_ROCKCHIP_RGA
>  
>  	  To compile this driver as a module choose m here.
>  
> +config VIDEO_ROCKCHIP_CIF
> +	tristate "Rockchip Camera Interface"
> +	depends on VIDEO_DEV && VIDEO_V4L2
> +	depends on ARCH_ROCKCHIP || COMPILE_TEST
> +	select VIDEOBUF2_DMA_SG
> +	select VIDEOBUF2_DMA_CONTIG
> +	select V4L2_FWNODE
> +	select V4L2_MEM2MEM_DEV
> +	help
> +	  This is a v4l2 driver for Rockchip SOC Camera interface.
> +
> +	  To compile this driver as a module choose m here.
> +
>  config VIDEO_TI_VPE
>  	tristate "TI VPE (Video Processing Engine) driver"
>  	depends on VIDEO_DEV && VIDEO_V4L2
> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
> index d13db96e3015..67e7ac034be1 100644
> --- a/drivers/media/platform/Makefile
> +++ b/drivers/media/platform/Makefile
> @@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_RENESAS_JPU)		+= rcar_jpu.o
>  obj-$(CONFIG_VIDEO_RENESAS_VSP1)	+= vsp1/
>  
>  obj-$(CONFIG_VIDEO_ROCKCHIP_RGA)	+= rockchip/rga/
> +obj-$(CONFIG_VIDEO_ROCKCHIP_CIF)	+= rockchip/cif/
>  
>  obj-y	+= omap/
>  
> diff --git a/drivers/media/platform/rockchip/cif/Makefile b/drivers/media/platform/rockchip/cif/Makefile
> new file mode 100644
> index 000000000000..727990824316
> --- /dev/null
> +++ b/drivers/media/platform/rockchip/cif/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +obj-$(CONFIG_VIDEO_ROCKCHIP_CIF) += video_rkcif.o
> +video_rkcif-objs += dev.o capture.o
> diff --git a/drivers/media/platform/rockchip/cif/capture.c b/drivers/media/platform/rockchip/cif/capture.c
> new file mode 100644
> index 000000000000..9df7757c6ed9
> --- /dev/null
> +++ b/drivers/media/platform/rockchip/cif/capture.c
> @@ -0,0 +1,1170 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip CIF Driver
> + *
> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
> + * Copyright (C) 2020 Maxime Chevallier <maxime.chevallier@bootlin.com>
> + */
> +
> +#include <linux/delay.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/reset.h>
> +#include <media/v4l2-common.h>
> +#include <media/v4l2-event.h>
> +#include <media/v4l2-fh.h>
> +#include <media/v4l2-fwnode.h>
> +#include <media/v4l2-ioctl.h>
> +#include <media/v4l2-mc.h>
> +#include <media/v4l2-subdev.h>
> +#include <media/videobuf2-dma-contig.h>
> +
> +#include "dev.h"
> +#include "regs.h"
> +
> +#define CIF_REQ_BUFS_MIN	1
> +#define CIF_MIN_WIDTH		64
> +#define CIF_MIN_HEIGHT		64
> +#define CIF_MAX_WIDTH		8192
> +#define CIF_MAX_HEIGHT		8192
> +
> +#define RKCIF_PLANE_Y			0
> +#define RKCIF_PLANE_CBCR		1
> +
> +#define CIF_FETCH_Y_LAST_LINE(VAL) ((VAL) & 0x1fff)
> +/* Check if swap y and c in bt1120 mode */
> +#define CIF_FETCH_IS_Y_FIRST(VAL) ((VAL) & 0xf)
> +
> +/* Get xsubs and ysubs for fourcc formats
> + *
> + * @xsubs: horizontal color samples in a 4*4 matrix, for yuv
> + * @ysubs: vertical color samples in a 4*4 matrix, for yuv
> + */
> +static int fcc_xysubs(u32 fcc, u32 *xsubs, u32 *ysubs)
> +{
> +	switch (fcc) {
> +	case V4L2_PIX_FMT_NV16:
> +	case V4L2_PIX_FMT_NV61:
> +		*xsubs = 2;
> +		*ysubs = 1;
> +		break;
> +	case V4L2_PIX_FMT_NV21:
> +	case V4L2_PIX_FMT_NV12:
> +		*xsubs = 2;
> +		*ysubs = 2;
> +		break;
> +	default:
> +		return -EINVAL;
> +	}
> +
> +	return 0;
> +}
> +
> +static const struct cif_output_fmt out_fmts[] = {
> +	{
> +		.fourcc = V4L2_PIX_FMT_NV16,
> +		.cplanes = 2,
> +		.mplanes = 1,
> +		.fmt_val = YUV_OUTPUT_422 | UV_STORAGE_ORDER_UVUV,
> +		.bpp = { 8, 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_NV61,
> +		.fmt_val = YUV_OUTPUT_422 | UV_STORAGE_ORDER_VUVU,
> +		.cplanes = 2,
> +		.mplanes = 1,
> +		.bpp = { 8, 16 },
> +	},
> +	{
> +		.fourcc = V4L2_PIX_FMT_NV12,
> +		.fmt_val = YUV_OUTPUT_420 | UV_STORAGE_ORDER_UVUV,
> +		.cplanes = 2,
> +		.mplanes = 1,
> +		.bpp = { 8, 16 },
> +		.mbus = MEDIA_BUS_FMT_UYVY8_2X8,
> +	},
> +	{
> +		.fourcc = V4L2_PIX_FMT_NV21,
> +		.fmt_val = YUV_OUTPUT_420 | UV_STORAGE_ORDER_VUVU,
> +		.cplanes = 2,
> +		.mplanes = 1,
> +		.bpp = { 8, 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_RGB24,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 24 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_RGB565,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_BGR666,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 18 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SRGGB8,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 8 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SGRBG8,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 8 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SGBRG8,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 8 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SBGGR8,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 8 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SRGGB10,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SGRBG10,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SGBRG10,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SBGGR10,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SRGGB12,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SGRBG12,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SGBRG12,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SBGGR12,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_SBGGR16,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}, {
> +		.fourcc = V4L2_PIX_FMT_Y16,
> +		.cplanes = 1,
> +		.mplanes = 1,
> +		.bpp = { 16 },
> +	}
> +};
> +
> +static const struct cif_input_fmt in_fmts[] = {
> +	{
> +		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YUYV,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
> +		.fmt_type	= CIF_FMT_TYPE_YUV,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YUYV,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
> +		.fmt_type	= CIF_FMT_TYPE_YUV,
> +		.field		= V4L2_FIELD_INTERLACED,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_YVYU8_2X8,
> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YVYU,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
> +		.fmt_type	= CIF_FMT_TYPE_YUV,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_YVYU8_2X8,
> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YVYU,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
> +		.fmt_type	= CIF_FMT_TYPE_YUV,
> +		.field		= V4L2_FIELD_INTERLACED,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_UYVY8_2X8,
> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_UYVY,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
> +		.fmt_type	= CIF_FMT_TYPE_YUV,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_UYVY8_2X8,
> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_UYVY,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
> +		.fmt_type	= CIF_FMT_TYPE_YUV,
> +		.field		= V4L2_FIELD_INTERLACED,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_VYUY8_2X8,
> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_VYUY,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
> +		.fmt_type	= CIF_FMT_TYPE_YUV,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_VYUY8_2X8,
> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_VYUY,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
> +		.fmt_type	= CIF_FMT_TYPE_YUV,
> +		.field		= V4L2_FIELD_INTERLACED,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SBGGR8_1X8,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SGBRG8_1X8,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SGRBG8_1X8,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SRGGB8_1X8,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SBGGR10_1X10,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SGBRG10_1X10,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SGRBG10_1X10,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SRGGB10_1X10,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SBGGR12_1X12,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SGBRG12_1X12,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SGRBG12_1X12,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_SRGGB12_1X12,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_RGB888_1X24,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RGB888,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_Y8_1X8,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_Y10_1X10,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}, {
> +		.mbus_code	= MEDIA_BUS_FMT_Y12_1X12,
> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
> +		.fmt_type	= CIF_FMT_TYPE_RAW,
> +		.field		= V4L2_FIELD_NONE,
> +	}
> +};
> +
> +static const struct
> +cif_input_fmt *get_input_fmt(struct v4l2_subdev *sd)

Don't put a linebreak after 'struct'. You can do this, though:

static const struct cif_input_fmt *
get_input_fmt(struct v4l2_subdev *sd)

However, the whole prototype is just 72 chars long, so just keep it
in one line.

> +{
> +	struct v4l2_subdev_format fmt;
> +	int ret;
> +	u32 i;
> +
> +	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
> +	fmt.pad = 0;
> +	ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
> +	if (ret < 0) {
> +		v4l2_warn(sd->v4l2_dev,
> +			  "sensor fmt invalid, set to default size\n");
> +		goto set_default;
> +	}
> +
> +	for (i = 0; i < ARRAY_SIZE(in_fmts); i++)
> +		if (fmt.format.code == in_fmts[i].mbus_code &&
> +		    fmt.format.field == in_fmts[i].field)
> +			return &in_fmts[i];
> +
> +	v4l2_err(sd->v4l2_dev, "remote sensor mbus code not supported\n");
> +
> +set_default:
> +	return NULL;
> +}
> +
> +	static const struct

Leading tab? I expect 'checkpatch.pl --strict' to catch that. Please run that
before posting v2.

> +cif_output_fmt *find_output_fmt(struct rkcif_stream *stream, u32 pixelfmt)
> +{
> +	const struct cif_output_fmt *fmt;
> +	u32 i;
> +
> +	for (i = 0; i < ARRAY_SIZE(out_fmts); i++) {
> +		fmt = &out_fmts[i];
> +		if (fmt->fourcc == pixelfmt)
> +			return fmt;
> +	}
> +
> +	return NULL;
> +}
> +
> +/***************************** stream operations ******************************/
> +static void rkcif_assign_new_buffer_oneframe(struct rkcif_stream *stream)
> +{
> +	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
> +	struct rkcif_device *dev = stream->cifdev;
> +	void __iomem *base = dev->base_addr;
> +
> +	/* Set up an empty buffer for the next frame */
> +	spin_lock(&stream->vbq_lock);
> +	if (!list_empty(&stream->buf_head)) {
> +		stream->curr_buf = list_first_entry(&stream->buf_head,
> +					struct rkcif_buffer, queue);
> +		list_del(&stream->curr_buf->queue);
> +	} else {
> +		stream->curr_buf = NULL;
> +	}
> +	spin_unlock(&stream->vbq_lock);
> +
> +	if (stream->curr_buf) {
> +		write_cif_reg(base, CIF_FRM0_ADDR_Y,
> +			      stream->curr_buf->buff_addr[RKCIF_PLANE_Y]);
> +		write_cif_reg(base, CIF_FRM0_ADDR_UV,
> +			      stream->curr_buf->buff_addr[RKCIF_PLANE_CBCR]);
> +		write_cif_reg(base, CIF_FRM1_ADDR_Y,
> +			      stream->curr_buf->buff_addr[RKCIF_PLANE_Y]);
> +		write_cif_reg(base, CIF_FRM1_ADDR_UV,
> +			      stream->curr_buf->buff_addr[RKCIF_PLANE_CBCR]);
> +	} else {
> +		write_cif_reg(base, CIF_FRM0_ADDR_Y, dummy_buf->dma_addr);
> +		write_cif_reg(base, CIF_FRM0_ADDR_UV, dummy_buf->dma_addr);
> +		write_cif_reg(base, CIF_FRM1_ADDR_Y, dummy_buf->dma_addr);
> +		write_cif_reg(base, CIF_FRM1_ADDR_UV, dummy_buf->dma_addr);
> +	}
> +}
> +
> +static void rkcif_stream_stop(struct rkcif_stream *stream)
> +{
> +	struct rkcif_device *cif_dev = stream->cifdev;
> +	void __iomem *base = cif_dev->base_addr;
> +	u32 val;
> +
> +	val = read_cif_reg(base, CIF_CTRL);
> +	write_cif_reg(base, CIF_CTRL, val & (~ENABLE_CAPTURE));
> +	write_cif_reg(base, CIF_INTEN, 0x0);
> +	write_cif_reg(base, CIF_INTSTAT, 0x3ff);
> +	write_cif_reg(base, CIF_FRAME_STATUS, 0x0);
> +
> +	stream->state = RKCIF_STATE_READY;
> +}
> +
> +static int rkcif_queue_setup(struct vb2_queue *queue,
> +			     unsigned int *num_buffers,
> +			     unsigned int *num_planes,
> +			     unsigned int sizes[],
> +			     struct device *alloc_devs[])
> +{
> +	struct rkcif_stream *stream = queue->drv_priv;
> +	const struct v4l2_pix_format_mplane *pixm;
> +	const struct cif_output_fmt *cif_fmt;
> +	u32 i;
> +
> +	pixm = &stream->pixm;
> +	cif_fmt = stream->cif_fmt_out;
> +
> +	if (*num_planes) {
> +		if (*num_planes != cif_fmt->mplanes)
> +			return -EINVAL;
> +
> +		for (i = 0; i < cif_fmt->mplanes; i++)
> +			if (sizes[i] < pixm->plane_fmt[i].sizeimage)
> +				return -EINVAL;
> +		return 0;
> +	}
> +
> +	*num_planes = cif_fmt->mplanes;
> +
> +	for (i = 0; i < cif_fmt->mplanes; i++) {
> +		const struct v4l2_plane_pix_format *plane_fmt;
> +
> +		plane_fmt = &pixm->plane_fmt[i];
> +		sizes[i] = plane_fmt->sizeimage;
> +	}
> +
> +	return 0;
> +}
> +
> +/*
> + * The vb2_buffer are stored in rkcif_buffer, in order to unify
> + * mplane buffer and none-mplane buffer.
> + */
> +static void rkcif_buf_queue(struct vb2_buffer *vb)
> +{
> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
> +	struct rkcif_buffer *cifbuf = to_rkcif_buffer(vbuf);
> +	struct vb2_queue *queue = vb->vb2_queue;
> +	struct rkcif_stream *stream = queue->drv_priv;
> +	struct v4l2_pix_format_mplane *pixm = &stream->pixm;
> +	const struct cif_output_fmt *fmt = stream->cif_fmt_out;
> +	unsigned long lock_flags = 0;
> +	int i;
> +
> +	memset(cifbuf->buff_addr, 0, sizeof(cifbuf->buff_addr));
> +	/* If mplanes > 1, every c-plane has its own m-plane,
> +	 * otherwise, multiple c-planes are in the same m-plane
> +	 */
> +	for (i = 0; i < fmt->mplanes; i++)
> +		cifbuf->buff_addr[i] = vb2_dma_contig_plane_dma_addr(vb, i);
> +
> +	if (fmt->mplanes == 1) {
> +		for (i = 0; i < fmt->cplanes - 1; i++)
> +			cifbuf->buff_addr[i + 1] = cifbuf->buff_addr[i] +
> +				pixm->plane_fmt[i].bytesperline * pixm->height;
> +	}
> +
> +	spin_lock_irqsave(&stream->vbq_lock, lock_flags);
> +	list_add_tail(&cifbuf->queue, &stream->buf_head);
> +	spin_unlock_irqrestore(&stream->vbq_lock, lock_flags);
> +}
> +
> +static int rkcif_create_dummy_buf(struct rkcif_stream *stream)
> +{

Why do you need a dummy buffer? That's very unusual, so at the very least
this needs comments.

> +	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
> +	struct rkcif_device *dev = stream->cifdev;
> +
> +	/* get a maximum plane size */
> +	dummy_buf->size = max3(stream->pixm.plane_fmt[0].bytesperline *
> +		stream->pixm.height,
> +		stream->pixm.plane_fmt[1].sizeimage,
> +		stream->pixm.plane_fmt[2].sizeimage);
> +
> +	dummy_buf->vaddr = dma_alloc_coherent(dev->dev, dummy_buf->size,
> +					      &dummy_buf->dma_addr,
> +					      GFP_KERNEL);
> +	if (!dummy_buf->vaddr) {
> +		v4l2_err(&dev->v4l2_dev,
> +			 "Failed to allocate the memory for dummy buffer\n");
> +		return -ENOMEM;
> +	}
> +
> +	v4l2_info(&dev->v4l2_dev, "Allocate dummy buffer, size: 0x%08x\n",
> +		  dummy_buf->size);
> +
> +	return 0;
> +}
> +
> +static void rkcif_destroy_dummy_buf(struct rkcif_stream *stream)
> +{
> +	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
> +	struct rkcif_device *dev = stream->cifdev;
> +
> +	dma_free_coherent(dev->dev, dummy_buf->size,
> +			  dummy_buf->vaddr, dummy_buf->dma_addr);
> +}
> +
> +static void rkcif_stop_streaming(struct vb2_queue *queue)
> +{
> +	struct rkcif_stream *stream = queue->drv_priv;
> +	struct rkcif_device *dev = stream->cifdev;
> +	struct rkcif_buffer *buf;
> +	struct v4l2_subdev *sd;
> +	int ret;
> +
> +	stream->stopping = true;
> +	ret = wait_event_timeout(stream->wq_stopped,
> +				 stream->state != RKCIF_STATE_STREAMING,
> +				 msecs_to_jiffies(1000));
> +	if (!ret) {
> +		rkcif_stream_stop(stream);
> +		stream->stopping = false;
> +	}
> +	pm_runtime_put(dev->dev);
> +
> +	/* stop the sub device*/
> +	sd = dev->sensor.sd;
> +	v4l2_subdev_call(sd, video, s_stream, 0);
> +	v4l2_subdev_call(sd, core, s_power, 0);
> +
> +	/* release buffers */
> +	if (stream->curr_buf) {
> +		list_add_tail(&stream->curr_buf->queue, &stream->buf_head);
> +		stream->curr_buf = NULL;
> +	}
> +	if (stream->next_buf) {
> +		list_add_tail(&stream->next_buf->queue, &stream->buf_head);
> +		stream->next_buf = NULL;
> +	}
> +
> +	while (!list_empty(&stream->buf_head)) {
> +		buf = list_first_entry(&stream->buf_head,
> +				       struct rkcif_buffer, queue);
> +		list_del(&buf->queue);
> +		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
> +	}
> +
> +	rkcif_destroy_dummy_buf(stream);
> +}
> +
> +static u32 rkcif_determine_input_mode(struct rkcif_device *dev)
> +{
> +	struct rkcif_sensor_info *sensor_info = &dev->sensor;
> +	struct rkcif_stream *stream = &dev->stream;
> +	v4l2_std_id std;
> +	u32 mode = INPUT_MODE_YUV;
> +	int ret;
> +
> +	ret = v4l2_subdev_call(sensor_info->sd, video, querystd, &std);
> +	if (ret == 0) {
> +		/* retrieve std from sensor if exist */
> +		switch (std) {
> +		case V4L2_STD_NTSC:
> +			mode = INPUT_MODE_NTSC;
> +			break;
> +		case V4L2_STD_PAL:
> +			mode = INPUT_MODE_PAL;
> +			break;
> +		case V4L2_STD_ATSC:
> +			mode = INPUT_MODE_BT1120;
> +			break;

Huh? V4L2_STD_* is only used for SDTV video receivers (i.e. Composite, S-Video,
analog TV). Sensors do not use it. So what is going on here?

And V4L2_STD_ATSC is deprecated and should not be used in new drivers.

> +		default:
> +			v4l2_err(&dev->v4l2_dev,
> +				 "std: %lld is not supported", std);

Missing break.

> +		}
> +	} else {
> +		/* determine input mode by mbus_code (fmt_type) */
> +		switch (stream->cif_fmt_in->fmt_type) {
> +		case CIF_FMT_TYPE_YUV:
> +			mode = INPUT_MODE_YUV;
> +			break;
> +		case CIF_FMT_TYPE_RAW:
> +			mode = INPUT_MODE_RAW;
> +			break;
> +		}
> +	}
> +
> +	return mode;
> +}
> +
> +static inline u32 rkcif_scl_ctl(struct rkcif_stream *stream)
> +{
> +	u32 fmt_type = stream->cif_fmt_in->fmt_type;
> +
> +	return (fmt_type == CIF_FMT_TYPE_YUV) ?
> +		ENABLE_YUV_16BIT_BYPASS : ENABLE_RAW_16BIT_BYPASS;
> +}
> +
> +static int rkcif_stream_start(struct rkcif_stream *stream)
> +{
> +	u32 val, mbus_flags, href_pol, vsync_pol,
> +	    xfer_mode = 0, yc_swap = 0, skip_top = 0;
> +	struct rkcif_device *dev = stream->cifdev;
> +	struct rkcif_sensor_info *sensor_info;
> +	void __iomem *base = dev->base_addr;
> +
> +	sensor_info = &dev->sensor;
> +	stream->frame_idx = 0;
> +
> +	mbus_flags = sensor_info->mbus.flags;
> +	href_pol = (mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) ?
> +			HSY_HIGH_ACTIVE : HSY_LOW_ACTIVE;
> +	vsync_pol = (mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) ?
> +			VSY_HIGH_ACTIVE : VSY_LOW_ACTIVE;
> +
> +	if (rkcif_determine_input_mode(dev) == INPUT_MODE_BT1120) {
> +		if (stream->cif_fmt_in->field == V4L2_FIELD_NONE)
> +			xfer_mode = BT1120_TRANSMIT_PROGRESS;
> +		else
> +			xfer_mode = BT1120_TRANSMIT_INTERFACE;
> +		if (!CIF_FETCH_IS_Y_FIRST(stream->cif_fmt_in->dvp_fmt_val))
> +			yc_swap = BT1120_YC_SWAP;
> +	}
> +
> +	val = vsync_pol | href_pol | rkcif_determine_input_mode(dev) |
> +	      stream->cif_fmt_out->fmt_val | stream->cif_fmt_in->dvp_fmt_val |
> +	      xfer_mode | yc_swap;
> +	write_cif_reg(base, CIF_FOR, val);
> +	val = stream->pixm.width;
> +	if (stream->cif_fmt_in->fmt_type == CIF_FMT_TYPE_RAW)
> +		val = stream->pixm.width * 2;
> +	write_cif_reg(base, CIF_VIR_LINE_WIDTH, val);
> +	write_cif_reg(base, CIF_SET_SIZE,
> +		      stream->pixm.width | (stream->pixm.height << 16));
> +
> +	v4l2_subdev_call(sensor_info->sd, sensor, g_skip_top_lines, &skip_top);
> +
> +	write_cif_reg(base, CIF_CROP, skip_top << CIF_CROP_Y_SHIFT);
> +	write_cif_reg(base, CIF_FRAME_STATUS, FRAME_STAT_CLS);
> +	write_cif_reg(base, CIF_INTSTAT, INTSTAT_CLS);
> +	write_cif_reg(base, CIF_SCL_CTRL, rkcif_scl_ctl(stream));
> +
> +	rkcif_assign_new_buffer_oneframe(stream);
> +
> +	write_cif_reg(base, CIF_INTEN, FRAME_END_EN | LINE_ERR_EN |
> +			    PST_INF_FRAME_END);
> +
> +	if (dev->chip_id == CHIP_RK1808_CIF &&
> +	    rkcif_determine_input_mode(dev) == INPUT_MODE_BT1120)
> +		write_cif_reg(base, CIF_CTRL,
> +			      AXI_BURST_16 | MODE_PINGPONG | ENABLE_CAPTURE);
> +	else
> +		write_cif_reg(base, CIF_CTRL,
> +			      AXI_BURST_16 | MODE_ONEFRAME | ENABLE_CAPTURE);
> +
> +	stream->state = RKCIF_STATE_STREAMING;
> +
> +	return 0;
> +}
> +
> +static int rkcif_start_streaming(struct vb2_queue *queue, unsigned int count)
> +{
> +	struct rkcif_stream *stream = queue->drv_priv;
> +	struct rkcif_device *dev = stream->cifdev;
> +	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
> +	struct v4l2_subdev *sd;
> +	int ret;
> +
> +	if (WARN_ON(stream->state != RKCIF_STATE_READY)) {
> +		ret = -EBUSY;
> +		v4l2_err(v4l2_dev, "stream in busy state\n");
> +		goto destroy_buf;
> +	}
> +
> +	stream->cif_fmt_in = get_input_fmt(dev->sensor.sd);
> +
> +	ret = rkcif_create_dummy_buf(stream);
> +	if (ret < 0) {
> +		v4l2_err(v4l2_dev, "Failed to create dummy_buf, %d\n", ret);
> +		goto destroy_buf;
> +	}
> +
> +	ret = pm_runtime_get_sync(dev->dev);
> +	if (ret < 0) {
> +		v4l2_err(v4l2_dev, "Failed to get runtime pm, %d\n", ret);
> +		goto destroy_dummy_buf;
> +	}
> +
> +	/* start sub-devices */
> +	sd = dev->sensor.sd;
> +	ret = v4l2_subdev_call(sd, core, s_power, 1);
> +	if (ret < 0 && ret != -ENOIOCTLCMD)
> +		goto runtime_put;
> +	ret = v4l2_subdev_call(sd, video, s_stream, 1);
> +	if (ret < 0)
> +		goto subdev_poweroff;
> +
> +	ret = rkcif_stream_start(stream);
> +	if (ret < 0)
> +		goto stop_stream;
> +
> +	return 0;
> +
> +stop_stream:
> +	rkcif_stream_stop(stream);
> +subdev_poweroff:
> +	v4l2_subdev_call(sd, core, s_power, 0);
> +runtime_put:
> +	pm_runtime_put(dev->dev);
> +destroy_dummy_buf:
> +	rkcif_destroy_dummy_buf(stream);
> +destroy_buf:
> +	while (!list_empty(&stream->buf_head)) {
> +		struct rkcif_buffer *buf;
> +
> +		buf = list_first_entry(&stream->buf_head,
> +				       struct rkcif_buffer, queue);
> +		list_del(&buf->queue);
> +		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
> +	}
> +
> +	return ret;
> +}
> +
> +static struct vb2_ops rkcif_vb2_ops = {
> +	.queue_setup = rkcif_queue_setup,
> +	.buf_queue = rkcif_buf_queue,
> +	.wait_prepare = vb2_ops_wait_prepare,
> +	.wait_finish = vb2_ops_wait_finish,
> +	.stop_streaming = rkcif_stop_streaming,
> +	.start_streaming = rkcif_start_streaming,
> +};
> +
> +static int rkcif_init_vb2_queue(struct vb2_queue *q,
> +				struct rkcif_stream *stream,
> +				enum v4l2_buf_type buf_type)
> +{
> +	q->type = buf_type;
> +	q->io_modes = VB2_MMAP | VB2_DMABUF;
> +	q->drv_priv = stream;
> +	q->ops = &rkcif_vb2_ops;
> +	q->mem_ops = &vb2_dma_contig_memops;
> +	q->buf_struct_size = sizeof(struct rkcif_buffer);
> +	q->min_buffers_needed = CIF_REQ_BUFS_MIN;
> +	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
> +	q->lock = &stream->vlock;
> +	q->dev = stream->cifdev->dev;
> +
> +	return vb2_queue_init(q);
> +}
> +
> +static void rkcif_set_fmt(struct rkcif_stream *stream,
> +			  struct v4l2_pix_format_mplane *pixm,
> +			  bool try)
> +{
> +	const struct cif_output_fmt *fmt;
> +	struct v4l2_rect input_rect;
> +	unsigned int imagesize = 0, planes;
> +	u32 xsubs = 1, ysubs = 1, i;
> +
> +	fmt = find_output_fmt(stream, pixm->pixelformat);
> +	if (!fmt)
> +		fmt = &out_fmts[0];
> +
> +	input_rect.width = CIF_MAX_WIDTH;
> +	input_rect.height = CIF_MAX_HEIGHT;
> +
> +	pixm->width = clamp_t(u32, pixm->width,
> +				CIF_MIN_WIDTH, input_rect.width);
> +	pixm->height = clamp_t(u32, pixm->height,
> +				CIF_MIN_HEIGHT, input_rect.height);
> +
> +	pixm->num_planes = fmt->mplanes;
> +	pixm->quantization = V4L2_QUANTIZATION_DEFAULT;
> +	pixm->colorspace = V4L2_COLORSPACE_SRGB;
> +
> +	pixm->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pixm->colorspace);
> +	pixm->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pixm->colorspace);

This colorimetry information should come from the sensor subdev. That's the
only component that knows this.

> +
> +	pixm->pixelformat = fmt->fourcc;
> +	pixm->field = V4L2_FIELD_NONE;
> +
> +	/* calculate plane size and image size */
> +	fcc_xysubs(fmt->fourcc, &xsubs, &ysubs);
> +
> +	planes = fmt->cplanes ? fmt->cplanes : fmt->mplanes;
> +
> +	for (i = 0; i < planes; i++) {
> +		struct v4l2_plane_pix_format *plane_fmt;
> +		int width, height, bpl, size;
> +
> +		if (i == 0) {
> +			width = pixm->width;
> +			height = pixm->height;
> +		} else {
> +			width = pixm->width / xsubs;
> +			height = pixm->height / ysubs;
> +		}
> +
> +		bpl = width * fmt->bpp[i] / 8;
> +		size = bpl * height;
> +		imagesize += size;
> +
> +		if (fmt->mplanes > i) {
> +			/* Set bpl and size for each mplane */
> +			plane_fmt = pixm->plane_fmt + i;
> +			plane_fmt->bytesperline = bpl;
> +			plane_fmt->sizeimage = size;
> +		}
> +	}
> +
> +	/* convert to non-MPLANE format.
> +	 * It's important since we want to unify non-MPLANE
> +	 * and MPLANE.
> +	 */
> +	if (fmt->mplanes == 1)
> +		pixm->plane_fmt[0].sizeimage = imagesize;
> +
> +	if (!try) {
> +		stream->cif_fmt_out = fmt;
> +		stream->pixm = *pixm;
> +	}
> +}
> +
> +void rkcif_stream_init(struct rkcif_device *dev)
> +{
> +	struct rkcif_stream *stream = &dev->stream;
> +	struct v4l2_pix_format_mplane pixm;
> +
> +	memset(stream, 0, sizeof(*stream));
> +	memset(&pixm, 0, sizeof(pixm));
> +	stream->cifdev = dev;
> +
> +	INIT_LIST_HEAD(&stream->buf_head);
> +	spin_lock_init(&stream->vbq_lock);
> +	stream->state = RKCIF_STATE_READY;
> +	init_waitqueue_head(&stream->wq_stopped);
> +
> +	/* Set default format */
> +	pixm.pixelformat = V4L2_PIX_FMT_NV12;
> +	pixm.width = RKCIF_DEFAULT_WIDTH;
> +	pixm.height = RKCIF_DEFAULT_HEIGHT;
> +	rkcif_set_fmt(stream, &pixm, false);
> +
> +	stream->crop.left = 0;
> +	stream->crop.top = 0;
> +	stream->crop.width = 10;
> +	stream->crop.height = 10;

I thought cropping wasn't supported yet? If that's indeed the case, then
just drop the 'crop' struct.

> +}
> +
> +static int rkcif_fh_open(struct file *filp)
> +{
> +	struct video_device *vdev = video_devdata(filp);
> +	struct rkcif_stream *stream = to_rkcif_stream(vdev);
> +	struct rkcif_device *cifdev = stream->cifdev;
> +
> +	rkcif_soft_reset(cifdev);

Dubious. What happens if you are streaming and from another shell you
run 'v4l2-ctl -D -d /dev/videoX'? That will open the device and call
rkcif_soft_reset(). That doesn't sound safe.

> +
> +	return v4l2_fh_open(filp);
> +}
> +
> +static const struct v4l2_file_operations rkcif_fops = {
> +	.open = rkcif_fh_open,
> +	.release = vb2_fop_release,
> +	.unlocked_ioctl = video_ioctl2,
> +	.poll = vb2_fop_poll,
> +	.mmap = vb2_fop_mmap,
> +};
> +
> +static int rkcif_enum_input(struct file *file, void *priv,
> +			    struct v4l2_input *input)
> +{
> +	if (input->index > 0)
> +		return -EINVAL;
> +
> +	input->type = V4L2_INPUT_TYPE_CAMERA;
> +	strlcpy(input->name, "Camera", sizeof(input->name));

Use strscpy instead of strcpy/strncpy/strlcpy. We standardized on that in the
media subsystem.

> +
> +	return 0;
> +}
> +
> +static int rkcif_try_fmt_vid_cap_mplane(struct file *file, void *fh,
> +					struct v4l2_format *f)
> +{
> +	struct rkcif_stream *stream = video_drvdata(file);
> +
> +	rkcif_set_fmt(stream, &f->fmt.pix_mp, true);
> +
> +	return 0;
> +}
> +
> +static int rkcif_enum_fmt_vid_cap(struct file *file, void *priv,
> +					 struct v4l2_fmtdesc *f)
> +{
> +	const struct cif_output_fmt *fmt = NULL;
> +
> +	if (f->index >= ARRAY_SIZE(out_fmts))
> +		return -EINVAL;
> +
> +	fmt = &out_fmts[f->index];
> +	f->pixelformat = fmt->fourcc;
> +
> +	return 0;
> +}
> +
> +static int rkcif_s_fmt_vid_cap_mplane(struct file *file,
> +				      void *priv, struct v4l2_format *f)
> +{
> +	struct rkcif_stream *stream = video_drvdata(file);
> +
> +	rkcif_set_fmt(stream, &f->fmt.pix_mp, false);
> +
> +	return 0;
> +}
> +
> +static int rkcif_g_fmt_vid_cap_mplane(struct file *file, void *fh,
> +				      struct v4l2_format *f)
> +{
> +	struct rkcif_stream *stream = video_drvdata(file);
> +
> +	f->fmt.pix_mp = stream->pixm;
> +
> +	return 0;
> +}
> +
> +static int rkcif_querycap(struct file *file, void *priv,
> +			  struct v4l2_capability *cap)
> +{
> +	struct rkcif_stream *stream = video_drvdata(file);
> +	struct device *dev = stream->cifdev->dev;
> +
> +	strlcpy(cap->driver, dev->driver->name, sizeof(cap->driver));
> +	strlcpy(cap->card, dev->driver->name, sizeof(cap->card));
> +	snprintf(cap->bus_info, sizeof(cap->bus_info),
> +		 "platform:%s", dev_name(dev));
> +
> +	return 0;
> +}
> +
> +static int rkcif_enum_framesizes(struct file *file, void *fh,
> +				 struct v4l2_frmsizeenum *fsize)
> +{
> +	struct rkcif_stream *stream = video_drvdata(file);
> +	struct rkcif_device *dev = stream->cifdev;
> +	struct v4l2_subdev_frame_size_enum fse = {
> +		.index = fsize->index,
> +		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
> +	};
> +	const struct cif_output_fmt *fmt;
> +	int ret;
> +
> +	if (!dev->sensor.sd)
> +		return -EINVAL;
> +
> +	fmt = find_output_fmt(stream, fsize->pixel_format);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	fse.code = fmt->mbus;
> +
> +	ret = v4l2_subdev_call(dev->sensor.sd, pad, enum_frame_size,
> +			       NULL, &fse);
> +	if (ret)
> +		return ret;
> +
> +	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
> +	fsize->discrete.width = fse.max_width;
> +	fsize->discrete.height = fse.max_height;
> +
> +	return 0;
> +}
> +
> +static int rkcif_g_input(struct file *file, void *fh, unsigned int *i)
> +{
> +	*i = 0;
> +	return 0;
> +}
> +
> +static int rkcif_s_input(struct file *file, void *fh, unsigned int i)
> +{
> +	if (i)
> +		return -EINVAL;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_ioctl_ops rkcif_v4l2_ioctl_ops = {
> +	.vidioc_reqbufs = vb2_ioctl_reqbufs,
> +	.vidioc_querybuf = vb2_ioctl_querybuf,
> +	.vidioc_create_bufs = vb2_ioctl_create_bufs,
> +	.vidioc_qbuf = vb2_ioctl_qbuf,
> +	.vidioc_expbuf = vb2_ioctl_expbuf,
> +	.vidioc_dqbuf = vb2_ioctl_dqbuf,
> +	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
> +	.vidioc_streamon = vb2_ioctl_streamon,
> +	.vidioc_streamoff = vb2_ioctl_streamoff,
> +
> +	.vidioc_enum_fmt_vid_cap = rkcif_enum_fmt_vid_cap,
> +	.vidioc_try_fmt_vid_cap_mplane = rkcif_try_fmt_vid_cap_mplane,
> +	.vidioc_s_fmt_vid_cap_mplane = rkcif_s_fmt_vid_cap_mplane,
> +	.vidioc_g_fmt_vid_cap_mplane = rkcif_g_fmt_vid_cap_mplane,
> +	.vidioc_querycap = rkcif_querycap,
> +	.vidioc_enum_framesizes = rkcif_enum_framesizes,
> +
> +	.vidioc_enum_input = rkcif_enum_input,
> +	.vidioc_g_input = rkcif_g_input,
> +	.vidioc_s_input = rkcif_s_input,
> +};
> +
> +void rkcif_unregister_stream_vdev(struct rkcif_device *dev)
> +{
> +	struct rkcif_stream *stream = &dev->stream;
> +
> +	media_entity_cleanup(&stream->vdev.entity);
> +	video_unregister_device(&stream->vdev);
> +}
> +
> +int rkcif_register_stream_vdev(struct rkcif_device *dev)
> +{
> +	struct rkcif_stream *stream = &dev->stream;
> +	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
> +	struct video_device *vdev = &stream->vdev;
> +	int ret;
> +
> +	strlcpy(vdev->name, CIF_VIDEODEVICE_NAME, sizeof(vdev->name));
> +	mutex_init(&stream->vlock);
> +
> +	vdev->ioctl_ops = &rkcif_v4l2_ioctl_ops;
> +	vdev->release = video_device_release_empty;
> +	vdev->fops = &rkcif_fops;
> +	vdev->minor = -1;
> +	vdev->v4l2_dev = v4l2_dev;
> +	vdev->lock = &stream->vlock;
> +	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
> +			    V4L2_CAP_STREAMING;
> +	video_set_drvdata(vdev, stream);
> +	vdev->vfl_dir = VFL_DIR_RX;
> +	stream->pad.flags = MEDIA_PAD_FL_SINK;
> +
> +	rkcif_init_vb2_queue(&stream->buf_queue, stream,
> +			V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE |
> +			V4L2_BUF_TYPE_VIDEO_CAPTURE);
> +	vdev->queue = &stream->buf_queue;
> +	strscpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name));
> +
> +	ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);

Hmm, you aren't basing your code on the latest media git repo
(https://git.linuxtv.org//media_tree.git).

VFL_TYPE_GRABBER was renamed to VFL_TYPE_VIDEO.

> +	if (ret < 0) {
> +		v4l2_err(v4l2_dev,
> +			 "video_register_device failed with error %d\n", ret);
> +		return ret;
> +	}
> +
> +	ret = media_entity_pads_init(&vdev->entity, 1, &stream->pad);
> +	if (ret < 0)
> +		goto unreg;
> +
> +	return 0;
> +unreg:
> +	video_unregister_device(vdev);
> +	return ret;
> +}
> +
> +static void rkcif_vb_done_oneframe(struct rkcif_stream *stream,
> +				   struct vb2_v4l2_buffer *vb_done)
> +{
> +	const struct cif_output_fmt *fmt = stream->cif_fmt_out;
> +	u32 i;
> +
> +	/* Dequeue a filled buffer */
> +	for (i = 0; i < fmt->mplanes; i++) {
> +		vb2_set_plane_payload(&vb_done->vb2_buf, i,
> +			stream->pixm.plane_fmt[i].sizeimage);
> +	}
> +	vb_done->vb2_buf.timestamp = ktime_get_ns();
> +	vb2_buffer_done(&vb_done->vb2_buf, VB2_BUF_STATE_DONE);
> +}
> +
> +void rkcif_irq_oneframe(struct rkcif_device *cif_dev)
> +{
> +	struct rkcif_stream *stream = &cif_dev->stream;
> +	u32 lastline, lastpix, ctl, cif_frmst, intstat;
> +	void __iomem *base = cif_dev->base_addr;
> +
> +	intstat = read_cif_reg(base, CIF_INTSTAT);
> +	cif_frmst = read_cif_reg(base, CIF_FRAME_STATUS);
> +	lastline = CIF_FETCH_Y_LAST_LINE(read_cif_reg(base, CIF_LAST_LINE));
> +	lastpix = read_cif_reg(base, CIF_LAST_PIX);
> +	ctl = read_cif_reg(base, CIF_CTRL);
> +
> +	/* There are two irqs enabled:
> +	 *  - PST_INF_FRAME_END: cif FIFO is ready, this is prior to FRAME_END
> +	 *  -         FRAME_END: cif has saved frame to memory, a frame ready
> +	 */
> +
> +	if ((intstat & PST_INF_FRAME_END)) {
> +		write_cif_reg(base, CIF_INTSTAT, PST_INF_FRAME_END_CLR);
> +
> +		if (stream->stopping)
> +			/* To stop CIF ASAP, before FRAME_END irq */
> +			write_cif_reg(base, CIF_CTRL, ctl & (~ENABLE_CAPTURE));
> +	}
> +
> +	if ((intstat & LINE_ERR)) {
> +		write_cif_reg(base, CIF_INTSTAT, LINE_ERR_CLR);
> +
> +		if (stream->stopping) {
> +			rkcif_stream_stop(stream);
> +			stream->stopping = false;
> +			wake_up(&stream->wq_stopped);
> +			return;
> +		}
> +
> +		v4l2_err(&cif_dev->v4l2_dev,
> +			 "Bad frame, irq:0x%x frmst:0x%x size:%dx%d\n",
> +			 intstat, cif_frmst, lastline, lastpix);
> +		/* Clear status to receive into the same buffer */
> +		write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
> +		return;
> +	}
> +
> +
> +	if ((intstat & FRAME_END)) {
> +		struct vb2_v4l2_buffer *vb_done = NULL;
> +
> +		write_cif_reg(base, CIF_INTSTAT, FRAME_END_CLR);
> +
> +		if (stream->stopping) {
> +			rkcif_stream_stop(stream);
> +			stream->stopping = false;
> +			wake_up(&stream->wq_stopped);
> +			return;
> +		}
> +
> +		if (lastline != stream->pixm.height ||
> +		    !(cif_frmst & CIF_F0_READY)) {
> +			v4l2_err(&cif_dev->v4l2_dev,
> +				 "Bad frame, irq:0x%x frmst:0x%x size:%dx%d\n",
> +				 intstat, cif_frmst, lastline, lastpix);
> +			/* Clear status to receive into the same buffer */
> +			write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
> +			return;
> +		}
> +
> +		if (stream->curr_buf)
> +			vb_done = &stream->curr_buf->vb;
> +		rkcif_assign_new_buffer_oneframe(stream);
> +
> +		/* In one-frame mode, must clear status manually to enable
> +		 * the next frame end irq
> +		 */
> +		write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
> +
> +		if (vb_done)
> +			rkcif_vb_done_oneframe(stream, vb_done);
> +
> +		stream->frame_idx++;
> +	}
> +}
> diff --git a/drivers/media/platform/rockchip/cif/dev.c b/drivers/media/platform/rockchip/cif/dev.c
> new file mode 100644
> index 000000000000..88f3833b7cdc
> --- /dev/null
> +++ b/drivers/media/platform/rockchip/cif/dev.c
> @@ -0,0 +1,407 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Rockchip CIF Driver
> + *
> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
> + */
> +
> +#include <linux/clk.h>
> +#include <linux/delay.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/of_graph.h>
> +#include <linux/of_platform.h>
> +#include <linux/of_reserved_mem.h>
> +#include <linux/reset.h>
> +#include <linux/pm_runtime.h>
> +#include <linux/pinctrl/consumer.h>
> +#include <media/v4l2-fwnode.h>
> +
> +#include "dev.h"
> +#include "regs.h"
> +
> +#define RKCIF_VERNO_LEN		10
> +
> +struct cif_match_data {
> +	int chip_id;
> +	const char * const *clks;
> +	const char * const *rsts;
> +	int clks_num;
> +	int rsts_num;
> +};
> +
> +static int rkcif_create_links(struct rkcif_device *dev)
> +{
> +	struct v4l2_subdev *sd = dev->sensor.sd;
> +	int ret;
> +
> +	ret = media_entity_get_fwnode_pad(&sd->entity, sd->fwnode,
> +					  MEDIA_PAD_FL_SOURCE);
> +	if (ret)
> +		return ret;
> +
> +	ret = media_create_pad_link(&sd->entity, 0,
> +				    &dev->stream.vdev.entity, 0,
> +				    MEDIA_LNK_FL_ENABLED);
> +	if (ret) {
> +		dev_err(dev->dev, "failed to create link");
> +		return ret;
> +	}
> +
> +	return 0;
> +}
> +
> +static int subdev_notifier_complete(struct v4l2_async_notifier *notifier)
> +{
> +	struct rkcif_device *dev;
> +	int ret;
> +
> +	dev = container_of(notifier, struct rkcif_device, notifier);
> +
> +	mutex_lock(&dev->media_dev.graph_mutex);
> +
> +	ret = rkcif_create_links(dev);
> +	if (ret < 0)
> +		goto unlock;
> +
> +	ret = v4l2_device_register_subdev_nodes(&dev->v4l2_dev);
> +	if (ret < 0)
> +		goto unlock;
> +
> +unlock:
> +	mutex_unlock(&dev->media_dev.graph_mutex);
> +	return ret;
> +}
> +
> +static int subdev_notifier_bound(struct v4l2_async_notifier *notifier,
> +				 struct v4l2_subdev *subdev,
> +				 struct v4l2_async_subdev *asd)
> +{
> +	struct rkcif_device *cif_dev = container_of(notifier,
> +					struct rkcif_device, notifier);
> +
> +	int pad;
> +
> +	cif_dev->sensor.sd = subdev;
> +	pad = media_entity_get_fwnode_pad(&subdev->entity, subdev->fwnode,
> +					  MEDIA_PAD_FL_SOURCE);
> +	if (pad < 0)
> +		return pad;
> +
> +	cif_dev->sensor.pad = pad;
> +
> +	return 0;
> +}
> +
> +static const struct v4l2_async_notifier_operations subdev_notifier_ops = {
> +	.bound = subdev_notifier_bound,
> +	.complete = subdev_notifier_complete,
> +};
> +
> +static int cif_subdev_notifier(struct rkcif_device *cif_dev)
> +{
> +	struct v4l2_async_notifier *ntf = &cif_dev->notifier;
> +	struct device *dev = cif_dev->dev;
> +	struct v4l2_fwnode_endpoint vep = {
> +		.bus_type = V4L2_MBUS_PARALLEL,
> +	};
> +	struct fwnode_handle *ep;
> +	int ret;
> +
> +	v4l2_async_notifier_init(ntf);
> +
> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0,
> +			FWNODE_GRAPH_ENDPOINT_NEXT);
> +	if (!ep)
> +		return -EINVAL;
> +
> +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
> +	if (ret)
> +		return ret;
> +
> +	ret = v4l2_async_notifier_add_fwnode_remote_subdev(ntf, ep,
> +							   &cif_dev->asd);
> +	if (ret)
> +		return ret;
> +
> +	ntf->ops = &subdev_notifier_ops;
> +
> +	fwnode_handle_put(ep);
> +
> +	ret = v4l2_async_notifier_register(&cif_dev->v4l2_dev, ntf);
> +	return ret;
> +}
> +
> +static int rkcif_register_platform_subdevs(struct rkcif_device *cif_dev)
> +{
> +	int ret;
> +
> +	ret = rkcif_register_stream_vdev(cif_dev);

You must wait with registering the video device (and media device as well
for that matter) until all subdevs are ready. So this should be moved to
subdev_notifier_complete.

Otherwise device nodes are created that cannot be used yet because the
subdevs aren't ready yet.

> +	if (ret < 0)
> +		return ret;
> +
> +	ret = cif_subdev_notifier(cif_dev);
> +	if (ret < 0) {
> +		v4l2_err(&cif_dev->v4l2_dev,
> +			 "Failed to register subdev notifier(%d)\n", ret);
> +		rkcif_unregister_stream_vdev(cif_dev);
> +	}
> +
> +	return 0;
> +}
> +
> +static const char * const px30_cif_clks[] = {
> +	"aclk_cif",
> +	"hclk_cif",
> +	"pclk_cif",
> +	"cif_out",
> +};
> +
> +static const char * const px30_cif_rsts[] = {
> +	"rst_cif_a",
> +	"rst_cif_h",
> +	"rst_cif_pclkin",
> +};
> +
> +static const struct cif_match_data px30_cif_match_data = {
> +	.chip_id = CHIP_PX30_CIF,
> +	.clks = px30_cif_clks,
> +	.clks_num = ARRAY_SIZE(px30_cif_clks),
> +	.rsts = px30_cif_rsts,
> +	.rsts_num = ARRAY_SIZE(px30_cif_rsts),
> +};
> +
> +static const struct of_device_id rkcif_plat_of_match[] = {
> +	{
> +		.compatible = "rockchip,px30-cif",
> +		.data = &px30_cif_match_data,
> +	},
> +	{},
> +};
> +
> +static irqreturn_t rkcif_irq_handler(int irq, void *ctx)
> +{
> +	struct device *dev = ctx;
> +	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
> +
> +	rkcif_irq_oneframe(cif_dev);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static void rkcif_disable_sys_clk(struct rkcif_device *cif_dev)
> +{
> +	int i;
> +
> +	for (i = cif_dev->clk_size - 1; i >= 0; i--)
> +		clk_disable_unprepare(cif_dev->clks[i]);
> +}
> +
> +static int rkcif_enable_sys_clk(struct rkcif_device *cif_dev)
> +{
> +	int i, ret = -EINVAL;
> +
> +	for (i = 0; i < cif_dev->clk_size; i++) {
> +		ret = clk_prepare_enable(cif_dev->clks[i]);
> +
> +		if (ret < 0)
> +			goto err;
> +	}
> +
> +	return 0;
> +
> +err:
> +	for (--i; i >= 0; --i)
> +		clk_disable_unprepare(cif_dev->clks[i]);
> +
> +	return ret;
> +}
> +
> +void rkcif_soft_reset(struct rkcif_device *cif_dev)
> +{
> +	unsigned int i;
> +
> +	for (i = 0; i < ARRAY_SIZE(cif_dev->cif_rst); i++)
> +		if (cif_dev->cif_rst[i])
> +			reset_control_assert(cif_dev->cif_rst[i]);
> +	udelay(5);
> +	for (i = 0; i < ARRAY_SIZE(cif_dev->cif_rst); i++)
> +		if (cif_dev->cif_rst[i])
> +			reset_control_deassert(cif_dev->cif_rst[i]);
> +}
> +
> +static int rkcif_plat_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *match;
> +	struct device_node *node = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	struct v4l2_device *v4l2_dev;
> +	struct rkcif_device *cif_dev;
> +	const struct cif_match_data *data;
> +	struct resource *res;
> +	int i, ret, irq;
> +
> +	match = of_match_node(rkcif_plat_of_match, node);
> +	if (IS_ERR(match))
> +		return PTR_ERR(match);
> +
> +	cif_dev = devm_kzalloc(dev, sizeof(*cif_dev), GFP_KERNEL);
> +	if (!cif_dev)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, cif_dev);
> +	cif_dev->dev = dev;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return irq;
> +
> +	ret = devm_request_irq(dev, irq, rkcif_irq_handler, IRQF_SHARED,
> +			       dev_driver_string(dev), dev);
> +	if (ret < 0) {
> +		dev_err(dev, "request irq failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	cif_dev->irq = irq;
> +	data = match->data;
> +	cif_dev->chip_id = data->chip_id;
> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	cif_dev->base_addr = devm_ioremap_resource(dev, res);
> +
> +	if (IS_ERR(cif_dev->base_addr))
> +		return PTR_ERR(cif_dev->base_addr);
> +
> +	if (data->clks_num > RKCIF_MAX_BUS_CLK ||
> +		data->rsts_num > RKCIF_MAX_RESET) {
> +		dev_err(dev, "out of range: clks(%d %d) rsts(%d %d)\n",
> +			data->clks_num, RKCIF_MAX_BUS_CLK,
> +			data->rsts_num, RKCIF_MAX_RESET);
> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < data->clks_num; i++) {
> +		struct clk *clk = devm_clk_get(dev, data->clks[i]);
> +
> +		if (IS_ERR(clk)) {
> +			dev_err(dev, "failed to get %s\n", data->clks[i]);
> +			return PTR_ERR(clk);
> +		}
> +
> +		cif_dev->clks[i] = clk;
> +	}
> +
> +	cif_dev->clk_size = data->clks_num;
> +
> +	for (i = 0; i < data->rsts_num; i++) {
> +		struct reset_control *rst =
> +			devm_reset_control_get(dev, data->rsts[i]);
> +		if (IS_ERR(rst)) {
> +			dev_err(dev, "failed to get %s\n", data->rsts[i]);
> +			return PTR_ERR(rst);
> +		}
> +		cif_dev->cif_rst[i] = rst;
> +	}
> +
> +	/* Initialize the stream */
> +	rkcif_stream_init(cif_dev);
> +
> +	strlcpy(cif_dev->media_dev.model, "rkcif",
> +		sizeof(cif_dev->media_dev.model));
> +	cif_dev->media_dev.dev = &pdev->dev;
> +	v4l2_dev = &cif_dev->v4l2_dev;
> +	v4l2_dev->mdev = &cif_dev->media_dev;
> +	strlcpy(v4l2_dev->name, "rkcif", sizeof(v4l2_dev->name));
> +	v4l2_ctrl_handler_init(&cif_dev->ctrl_handler, 8);
> +	v4l2_dev->ctrl_handler = &cif_dev->ctrl_handler;
> +
> +	ret = v4l2_device_register(cif_dev->dev, &cif_dev->v4l2_dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	media_device_init(&cif_dev->media_dev);
> +
> +	ret = media_device_register(&cif_dev->media_dev);
> +	if (ret < 0) {
> +		v4l2_err(v4l2_dev, "Failed to register media device: %d\n",
> +			 ret);
> +		goto err_unreg_v4l2_dev;
> +	}
> +
> +	/* create & register platefom subdev (from of_node) */

platefom -> platform

> +	ret = rkcif_register_platform_subdevs(cif_dev);
> +	if (ret < 0)
> +		goto err_unreg_media_dev;
> +
> +	ret = of_reserved_mem_device_init(dev);
> +	if (ret)
> +		v4l2_warn(v4l2_dev, "No reserved memory region assign to CIF\n");
> +
> +	pm_runtime_enable(&pdev->dev);
> +
> +	return 0;
> +
> +err_unreg_media_dev:
> +	media_device_unregister(&cif_dev->media_dev);
> +err_unreg_v4l2_dev:
> +	v4l2_device_unregister(&cif_dev->v4l2_dev);
> +	return ret;
> +}
> +
> +static int rkcif_plat_remove(struct platform_device *pdev)
> +{
> +	struct rkcif_device *cif_dev = platform_get_drvdata(pdev);
> +
> +	pm_runtime_disable(&pdev->dev);
> +
> +	media_device_unregister(&cif_dev->media_dev);
> +	v4l2_device_unregister(&cif_dev->v4l2_dev);
> +	rkcif_unregister_stream_vdev(cif_dev);
> +
> +	return 0;
> +}
> +
> +static int __maybe_unused rkcif_runtime_suspend(struct device *dev)
> +{
> +	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
> +
> +	rkcif_disable_sys_clk(cif_dev);
> +
> +	return pinctrl_pm_select_sleep_state(dev);
> +}
> +
> +static int __maybe_unused rkcif_runtime_resume(struct device *dev)
> +{
> +	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
> +	int ret;
> +
> +	ret = pinctrl_pm_select_default_state(dev);
> +	if (ret < 0)
> +		return ret;
> +	rkcif_enable_sys_clk(cif_dev);
> +
> +	return 0;
> +}
> +
> +static const struct dev_pm_ops rkcif_plat_pm_ops = {
> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
> +				pm_runtime_force_resume)
> +	SET_RUNTIME_PM_OPS(rkcif_runtime_suspend, rkcif_runtime_resume, NULL)
> +};
> +
> +static struct platform_driver rkcif_plat_drv = {
> +	.driver = {
> +		   .name = CIF_DRIVER_NAME,
> +		   .of_match_table = of_match_ptr(rkcif_plat_of_match),
> +		   .pm = &rkcif_plat_pm_ops,
> +	},
> +	.probe = rkcif_plat_probe,
> +	.remove = rkcif_plat_remove,
> +};
> +
> +module_platform_driver(rkcif_plat_drv);
> +MODULE_AUTHOR("Rockchip Camera/ISP team");
> +MODULE_DESCRIPTION("Rockchip CIF platform driver");
> +MODULE_LICENSE("GPL");
> diff --git a/drivers/media/platform/rockchip/cif/dev.h b/drivers/media/platform/rockchip/cif/dev.h
> new file mode 100644
> index 000000000000..3dc47d461d04
> --- /dev/null
> +++ b/drivers/media/platform/rockchip/cif/dev.h
> @@ -0,0 +1,208 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Rockchip CIF Driver
> + *
> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
> + */
> +
> +#ifndef _RKCIF_DEV_H
> +#define _RKCIF_DEV_H
> +
> +#include <linux/mutex.h>
> +#include <media/media-device.h>
> +#include <media/media-entity.h>
> +#include <media/v4l2-ctrls.h>
> +#include <media/v4l2-device.h>
> +#include <media/videobuf2-v4l2.h>
> +
> +#define CIF_DRIVER_NAME		"rkcif"
> +#define CIF_VIDEODEVICE_NAME	"stream_cif"
> +
> +#define RKCIF_MAX_BUS_CLK	8
> +#define RKCIF_MAX_SENSOR	2
> +#define RKCIF_MAX_RESET		5
> +#define RKCIF_MAX_CSI_CHANNEL	4
> +
> +#define RKCIF_DEFAULT_WIDTH	640
> +#define RKCIF_DEFAULT_HEIGHT	480
> +
> +#define write_cif_reg(base, addr, val)  writel(val, (addr) + (base))
> +#define read_cif_reg(base, addr) readl((addr) + (base))
> +
> +#define write_csihost_reg(base, addr, val)  writel(val, (addr) + (base))
> +#define read_csihost_reg(base, addr) readl((addr) + (base))
> +
> +enum rkcif_state {
> +	RKCIF_STATE_DISABLED,
> +	RKCIF_STATE_READY,
> +	RKCIF_STATE_STREAMING
> +};
> +
> +enum rkcif_chip_id {
> +	CHIP_PX30_CIF,
> +	CHIP_RK1808_CIF,
> +	CHIP_RK3128_CIF,
> +	CHIP_RK3288_CIF
> +};
> +
> +enum host_type_t {
> +	RK_CSI_RXHOST,
> +	RK_DSI_RXHOST
> +};
> +
> +struct rkcif_buffer {
> +	struct vb2_v4l2_buffer vb;
> +	struct list_head queue;
> +	union {
> +		u32 buff_addr[VIDEO_MAX_PLANES];
> +		void *vaddr[VIDEO_MAX_PLANES];
> +	};
> +};
> +
> +struct rkcif_dummy_buffer {
> +	void *vaddr;
> +	dma_addr_t dma_addr;
> +	u32 size;
> +};
> +
> +extern int rkcif_debug;
> +
> +static inline struct rkcif_buffer *to_rkcif_buffer(struct vb2_v4l2_buffer *vb)
> +{
> +	return container_of(vb, struct rkcif_buffer, vb);
> +}
> +
> +/*
> + * struct rkcif_sensor_info - Sensor infomations
> + * @mbus: media bus configuration
> + */
> +struct rkcif_sensor_info {
> +	struct v4l2_subdev *sd;
> +	int pad;
> +	struct v4l2_mbus_config mbus;
> +	int lanes;
> +};
> +
> +/*
> + * struct cif_output_fmt - The output format
> + *
> + * @fourcc: pixel format in fourcc
> + * @cplanes: number of colour planes
> + * @fmt_val: the fmt val corresponding to CIF_FOR register
> + * @bpp: bits per pixel for each cplanes
> + */
> +struct cif_output_fmt {
> +	u32 fourcc;
> +	u32 mbus;
> +	u8 cplanes;
> +	u8 mplanes;
> +	u32 fmt_val;
> +	u8 bpp[VIDEO_MAX_PLANES];
> +};
> +
> +enum cif_fmt_type {
> +	CIF_FMT_TYPE_YUV = 0,
> +	CIF_FMT_TYPE_RAW,
> +};
> +
> +/*
> + * struct cif_input_fmt - The input mbus format from sensor
> + *
> + * @mbus_code: mbus format
> + * @dvp_fmt_val: the fmt val corresponding to CIF_FOR register
> + * @csi_fmt_val: the fmt val corresponding to CIF_CSI_ID_CTRL
> + * @field: the field type of the input from sensor
> + */
> +struct cif_input_fmt {
> +	u32 mbus_code;
> +	u32 dvp_fmt_val;
> +	u32 csi_fmt_val;
> +	enum cif_fmt_type fmt_type;
> +	enum v4l2_field field;
> +};
> +
> +/*
> + * struct rkcif_stream - Stream states TODO
> + *
> + * @vbq_lock: lock to protect buf_queue
> + * @buf_queue: queued buffer list
> + * @dummy_buf: dummy space to store dropped data
> + *
> + * rkcif use shadowsock registers, so it need two buffer at a time
> + * @curr_buf: the buffer used for current frame
> + * @next_buf: the buffer used for next frame
> + */
> +struct rkcif_stream {
> +	struct rkcif_device		*cifdev;
> +	enum rkcif_state		state;
> +	bool				stopping;
> +	wait_queue_head_t		wq_stopped;
> +	int				frame_idx;
> +	int				frame_phase;
> +
> +	/* lock between irq and buf_queue */
> +	spinlock_t			vbq_lock;
> +	struct vb2_queue		buf_queue;
> +	struct list_head		buf_head;
> +	struct rkcif_dummy_buffer	dummy_buf;
> +	struct rkcif_buffer		*curr_buf;
> +	struct rkcif_buffer		*next_buf;
> +
> +	/* vfd lock */
> +	struct mutex			vlock;
> +	struct video_device		vdev;
> +	/* TODO: pad for dvp and mipi separately? */
> +	struct media_pad		pad;
> +
> +	const struct cif_output_fmt	*cif_fmt_out;
> +	const struct cif_input_fmt	*cif_fmt_in;
> +	struct v4l2_pix_format_mplane	pixm;
> +	struct v4l2_rect		crop;
> +	int				crop_enable;
> +};
> +
> +static inline struct rkcif_stream *to_rkcif_stream(struct video_device *vdev)
> +{
> +	return container_of(vdev, struct rkcif_stream, vdev);
> +}
> +
> +/*
> + * struct rkcif_device - ISP platform device
> + * @base_addr: base register address
> + * @active_sensor: sensor in-use, set when streaming on
> + * @stream: capture video device
> + */
> +struct rkcif_device {
> +	struct list_head		list;
> +	struct device			*dev;
> +	int				irq;
> +	void __iomem			*base_addr;
> +	void __iomem			*csi_base;
> +	struct clk			*clks[RKCIF_MAX_BUS_CLK];
> +	int				clk_size;
> +	struct vb2_alloc_ctx		*alloc_ctx;
> +	bool				iommu_en;
> +	struct iommu_domain		*domain;
> +	struct reset_control		*cif_rst[RKCIF_MAX_RESET];
> +
> +	struct v4l2_device		v4l2_dev;
> +	struct media_device		media_dev;
> +	struct v4l2_ctrl_handler	ctrl_handler;
> +	struct v4l2_async_notifier	notifier;
> +	struct v4l2_async_subdev	asd;
> +	struct rkcif_sensor_info	sensor;
> +
> +	struct rkcif_stream		stream;
> +
> +	int				chip_id;
> +};
> +
> +void rkcif_unregister_stream_vdev(struct rkcif_device *dev);
> +int rkcif_register_stream_vdev(struct rkcif_device *dev);
> +void rkcif_stream_init(struct rkcif_device *dev);
> +
> +void rkcif_irq_oneframe(struct rkcif_device *cif_dev);
> +void rkcif_irq_pingpong(struct rkcif_device *cif_dev);
> +void rkcif_soft_reset(struct rkcif_device *cif_dev);
> +
> +#endif
> diff --git a/drivers/media/platform/rockchip/cif/regs.h b/drivers/media/platform/rockchip/cif/regs.h
> new file mode 100644
> index 000000000000..5e0f926c70d3
> --- /dev/null
> +++ b/drivers/media/platform/rockchip/cif/regs.h
> @@ -0,0 +1,256 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * Rockchip CIF Driver
> + *
> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
> + */
> +
> +#ifndef _RKCIF_REGS_H
> +#define _RKCIF_REGS_H
> +
> +/* CIF Reg Offset */
> +#define CIF_CTRL			0x00
> +#define CIF_INTEN			0x04
> +#define CIF_INTSTAT			0x08
> +#define CIF_FOR				0x0c
> +#define CIF_LINE_NUM_ADDR		0x10
> +#define CIF_FRM0_ADDR_Y			0x14
> +#define CIF_FRM0_ADDR_UV		0x18
> +#define CIF_FRM1_ADDR_Y			0x1c
> +#define CIF_FRM1_ADDR_UV		0x20
> +#define CIF_VIR_LINE_WIDTH		0x24
> +#define CIF_SET_SIZE			0x28
> +#define CIF_SCM_ADDR_Y			0x2c
> +#define CIF_SCM_ADDR_U			0x30
> +#define CIF_SCM_ADDR_V			0x34
> +#define CIF_WB_UP_FILTER		0x38
> +#define CIF_WB_LOW_FILTER		0x3c
> +#define CIF_WBC_CNT			0x40
> +#define CIF_CROP			0x44
> +#define CIF_SCL_CTRL			0x48
> +#define CIF_SCL_DST			0x4c
> +#define CIF_SCL_FCT			0x50
> +#define CIF_SCL_VALID_NUM		0x54
> +#define CIF_LINE_LOOP_CTR		0x58
> +#define CIF_FRAME_STATUS		0x60
> +#define CIF_CUR_DST			0x64
> +#define CIF_LAST_LINE			0x68
> +#define CIF_LAST_PIX			0x6c
> +
> +/* RK1808 CIF CSI Registers Offset */
> +#define CIF_CSI_ID0_CTRL0		0x80
> +#define CIF_CSI_ID0_CTRL1		0x84
> +#define CIF_CSI_ID1_CTRL0		0x88
> +#define CIF_CSI_ID1_CTRL1		0x8c
> +#define CIF_CSI_ID2_CTRL0		0x90
> +#define CIF_CSI_ID2_CTRL1		0x94
> +#define CIF_CSI_ID3_CTRL0		0x98
> +#define CIF_CSI_ID3_CTRL1		0x9c
> +#define CIF_CSI_WATER_LINE		0xa0
> +#define CIF_CSI_FRM0_ADDR_Y_ID0		0xa4
> +#define CIF_CSI_FRM1_ADDR_Y_ID0		0xa8
> +#define CIF_CSI_FRM0_ADDR_UV_ID0	0xac
> +#define CIF_CSI_FRM1_ADDR_UV_ID0	0xb0
> +#define CIF_CSI_FRM0_VLW_Y_ID0		0xb4
> +#define CIF_CSI_FRM1_VLW_Y_ID0		0xb8
> +#define CIF_CSI_FRM0_VLW_UV_ID0		0xbc
> +#define CIF_CSI_FRM1_VLW_UV_ID0		0xc0
> +#define CIF_CSI_FRM0_ADDR_Y_ID1		0xc4
> +#define CIF_CSI_FRM1_ADDR_Y_ID1		0xc8
> +#define CIF_CSI_FRM0_ADDR_UV_ID1	0xcc
> +#define CIF_CSI_FRM1_ADDR_UV_ID1	0xd0
> +#define CIF_CSI_FRM0_VLW_Y_ID1		0xd4
> +#define CIF_CSI_FRM1_VLW_Y_ID1		0xd8
> +#define CIF_CSI_FRM0_VLW_UV_ID1		0xdc
> +#define CIF_CSI_FRM1_VLW_UV_ID1		0xe0
> +#define CIF_CSI_FRM0_ADDR_Y_ID2		0xe4
> +#define CIF_CSI_FRM1_ADDR_Y_ID2		0xe8
> +#define CIF_CSI_FRM0_ADDR_UV_ID2	0xec
> +#define CIF_CSI_FRM1_ADDR_UV_ID2	0xf0
> +#define CIF_CSI_FRM0_VLW_Y_ID2		0xf4
> +#define CIF_CSI_FRM1_VLW_Y_ID2		0xf8
> +#define CIF_CSI_FRM0_VLW_UV_ID2		0xfc
> +#define CIF_CSI_FRM1_VLW_UV_ID2		0x100
> +#define CIF_CSI_FRM0_ADDR_Y_ID3		0x104
> +#define CIF_CSI_FRM1_ADDR_Y_ID3		0x108
> +#define CIF_CSI_FRM0_ADDR_UV_ID3	0x10c
> +#define CIF_CSI_FRM1_ADDR_UV_ID3	0x110
> +#define CIF_CSI_FRM0_VLW_Y_ID3		0x114
> +#define CIF_CSI_FRM1_VLW_Y_ID3		0x118
> +#define CIF_CSI_FRM0_VLW_UV_ID3		0x11c
> +#define CIF_CSI_FRM1_VLW_UV_ID3		0x120
> +#define CIF_CSI_INTEN			0x124
> +#define CIF_CSI_INTSTAT			0x128
> +#define CIF_CSI_LINE_INT_NUM_ID0_1	0x12c
> +#define CIF_CSI_LINE_INT_NUM_ID2_3	0x130
> +#define CIF_CSI_LINE_CNT_ID0_1		0x134
> +#define CIF_CSI_LINE_CNT_ID2_3		0x138
> +#define CIF_CSI_ID0_CROP_START		0x13c
> +#define CIF_CSI_ID1_CROP_START		0x140
> +#define CIF_CSI_ID2_CROP_START		0x144
> +#define CIF_CSI_ID3_CROP_START		0x148
> +
> +/* The key register bit description */
> +
> +/* CIF_CTRL Reg */
> +#define DISABLE_CAPTURE			(0x0 << 0)
> +#define ENABLE_CAPTURE			(0x1 << 0)
> +#define MODE_ONEFRAME			(0x0 << 1)
> +#define MODE_PINGPONG			(0x1 << 1)
> +#define MODE_LINELOOP			(0x2 << 1)
> +#define AXI_BURST_16			(0xF << 12)
> +
> +/* CIF_INTEN */
> +#define INTEN_DISABLE			(0x0 << 0)
> +#define FRAME_END_EN			(0x1 << 0)
> +#define LINE_ERR_EN			(0x1 << 2)
> +#define BUS_ERR_EN			(0x1 << 6)
> +#define SCL_ERR_EN			(0x1 << 7)
> +#define PST_INF_FRAME_END_EN		(0x1 << 9)
> +
> +/* CIF INTSTAT */
> +#define INTSTAT_CLS			(0x3FF)
> +#define FRAME_END			(0x01 << 0)
> +#define LINE_ERR			(0x01 << 2)
> +#define PST_INF_FRAME_END		(0x01 << 9)
> +#define FRAME_END_CLR			(0x01 << 0)
> +#define LINE_ERR_CLR			(0x01 << 2)
> +#define PST_INF_FRAME_END_CLR		(0x01 << 9)
> +#define INTSTAT_ERR			(0xFC)
> +
> +/* FRAME STATUS */
> +#define FRAME_STAT_CLS			0x00
> +#define FRM0_STAT_CLS			0x20	/* write 0 to clear frame 0 */
> +
> +/* CIF FORMAT */
> +#define VSY_HIGH_ACTIVE			(0x01 << 0)
> +#define VSY_LOW_ACTIVE			(0x00 << 0)
> +#define HSY_LOW_ACTIVE			(0x01 << 1)
> +#define HSY_HIGH_ACTIVE			(0x00 << 1)
> +#define INPUT_MODE_YUV			(0x00 << 2)
> +#define INPUT_MODE_PAL			(0x02 << 2)
> +#define INPUT_MODE_NTSC			(0x03 << 2)
> +#define INPUT_MODE_BT1120		(0x07 << 2)
> +#define INPUT_MODE_RAW			(0x04 << 2)
> +#define INPUT_MODE_JPEG			(0x05 << 2)
> +#define INPUT_MODE_MIPI			(0x06 << 2)
> +#define YUV_INPUT_ORDER_UYVY		(0x00 << 5)
> +#define YUV_INPUT_ORDER_YVYU		(0x01 << 5)
> +#define YUV_INPUT_ORDER_VYUY		(0x10 << 5)
> +#define YUV_INPUT_ORDER_YUYV		(0x03 << 5)
> +#define YUV_INPUT_422			(0x00 << 7)
> +#define YUV_INPUT_420			(0x01 << 7)
> +#define INPUT_420_ORDER_EVEN		(0x00 << 8)
> +#define INPUT_420_ORDER_ODD		(0x01 << 8)
> +#define CCIR_INPUT_ORDER_ODD		(0x00 << 9)
> +#define CCIR_INPUT_ORDER_EVEN		(0x01 << 9)
> +#define RAW_DATA_WIDTH_8		(0x00 << 11)
> +#define RAW_DATA_WIDTH_10		(0x01 << 11)
> +#define RAW_DATA_WIDTH_12		(0x02 << 11)
> +#define YUV_OUTPUT_422			(0x00 << 16)
> +#define YUV_OUTPUT_420			(0x01 << 16)
> +#define OUTPUT_420_ORDER_EVEN		(0x00 << 17)
> +#define OUTPUT_420_ORDER_ODD		(0x01 << 17)
> +#define RAWD_DATA_LITTLE_ENDIAN		(0x00 << 18)
> +#define RAWD_DATA_BIG_ENDIAN		(0x01 << 18)
> +#define UV_STORAGE_ORDER_UVUV		(0x00 << 19)
> +#define UV_STORAGE_ORDER_VUVU		(0x01 << 19)
> +#define BT1120_CLOCK_SINGLE_EDGES	(0x00 << 24)
> +#define BT1120_CLOCK_DOUBLE_EDGES	(0x01 << 24)
> +#define BT1120_TRANSMIT_INTERFACE	(0x00 << 25)
> +#define BT1120_TRANSMIT_PROGRESS	(0x01 << 25)
> +#define BT1120_YC_SWAP			(0x01 << 26)
> +
> +/* CIF_SCL_CTRL */
> +#define ENABLE_SCL_DOWN			(0x01 << 0)
> +#define DISABLE_SCL_DOWN		(0x00 << 0)
> +#define ENABLE_SCL_UP			(0x01 << 1)
> +#define DISABLE_SCL_UP			(0x00 << 1)
> +#define ENABLE_YUV_16BIT_BYPASS		(0x01 << 4)
> +#define DISABLE_YUV_16BIT_BYPASS	(0x00 << 4)
> +#define ENABLE_RAW_16BIT_BYPASS		(0x01 << 5)
> +#define DISABLE_RAW_16BIT_BYPASS	(0x00 << 5)
> +#define ENABLE_32BIT_BYPASS		(0x01 << 6)
> +#define DISABLE_32BIT_BYPASS		(0x00 << 6)
> +
> +/* CIF_INTSTAT */
> +#define CIF_F0_READY			(0x01 << 0)
> +#define CIF_F1_READY			(0x01 << 1)
> +
> +/* CIF CROP */
> +#define CIF_CROP_Y_SHIFT		16
> +#define CIF_CROP_X_SHIFT		0
> +
> +/* CIF_CSI_ID_CTRL0 */
> +#define CSI_DISABLE_CAPTURE		(0x0 << 0)
> +#define CSI_ENABLE_CAPTURE		(0x1 << 0)
> +#define CSI_WRDDR_TYPE_RAW8		(0x0 << 1)
> +#define CSI_WRDDR_TYPE_RAW10		(0x1 << 1)
> +#define CSI_WRDDR_TYPE_RAW12		(0x2 << 1)
> +#define CSI_WRDDR_TYPE_RGB888		(0x3 << 1)
> +#define CSI_WRDDR_TYPE_YUV422		(0x4 << 1)
> +#define CSI_DISABLE_COMMAND_MODE	(0x0 << 4)
> +#define CSI_ENABLE_COMMAND_MODE		(0x1 << 4)
> +#define CSI_DISABLE_CROP		(0x0 << 5)
> +#define CSI_ENABLE_CROP			(0x1 << 5)
> +
> +/* CIF_CSI_INTEN */
> +#define CSI_FRAME0_START_INTEN(id)	(0x1 << ((id) * 2))
> +#define CSI_FRAME1_START_INTEN(id)	(0x1 << ((id) * 2 + 1))
> +#define CSI_FRAME0_END_INTEN(id)	(0x1 << ((id) * 2 + 8))
> +#define CSI_FRAME1_END_INTEN(id)	(0x1 << ((id) * 2 + 9))
> +#define CSI_DMA_Y_FIFO_OVERFLOW_INTEN	(0x1 << 16)
> +#define CSI_DMA_UV_FIFO_OVERFLOW_INTEN	(0x1 << 17)
> +#define CSI_CONFIG_FIFO_OVERFLOW_INTEN	(0x1 << 18)
> +#define CSI_BANDWIDTH_LACK_INTEN	(0x1 << 19)
> +#define CSI_RX_FIFO_OVERFLOW_INTEN	(0x1 << 20)
> +#define CSI_ALL_FRAME_START_INTEN	(0xff << 0)
> +#define CSI_ALL_FRAME_END_INTEN		(0xff << 8)
> +#define CSI_ALL_ERROR_INTEN		(0x1f << 16)
> +
> +/* CIF_CSI_INTSTAT */
> +#define CSI_FRAME0_START_ID0		(0x1 << 0)
> +#define CSI_FRAME1_START_ID0		(0x1 << 1)
> +#define CSI_FRAME0_START_ID1		(0x1 << 2)
> +#define CSI_FRAME1_START_ID1		(0x1 << 3)
> +#define CSI_FRAME0_START_ID2		(0x1 << 4)
> +#define CSI_FRAME1_START_ID2		(0x1 << 5)
> +#define CSI_FRAME0_START_ID3		(0x1 << 6)
> +#define CSI_FRAME1_START_ID3		(0x1 << 7)
> +#define CSI_FRAME0_END_ID0		(0x1 << 8)
> +#define CSI_FRAME1_END_ID0		(0x1 << 9)
> +#define CSI_FRAME0_END_ID1		(0x1 << 10)
> +#define CSI_FRAME1_END_ID1		(0x1 << 11)
> +#define CSI_FRAME0_END_ID2		(0x1 << 12)
> +#define CSI_FRAME1_END_ID2		(0x1 << 13)
> +#define CSI_FRAME0_END_ID3		(0x1 << 14)
> +#define CSI_FRAME1_END_ID3		(0x1 << 15)
> +#define CSI_DMA_Y_FIFO_OVERFLOW		(0x1 << 16)
> +#define CSI_DMA_UV_FIFO_OVERFLOW	(0x1 << 17)
> +#define CSI_CONFIG_FIFO_OVERFLOW	(0x1 << 18)
> +#define CSI_BANDWIDTH_LACK		(0x1 << 19)
> +#define CSI_RX_FIFO_OVERFLOW		(0x1 << 20)
> +
> +#define CSI_FIFO_OVERFLOW	(CSI_DMA_Y_FIFO_OVERFLOW |	\
> +				 CSI_DMA_UV_FIFO_OVERFLOW |	\
> +				 CSI_CONFIG_FIFO_OVERFLOW |	\
> +				 CSI_RX_FIFO_OVERFLOW)
> +
> +/* CSI Host Registers Define */
> +#define CSIHOST_N_LANES		0x04
> +#define CSIHOST_PHY_RSTZ	0x0c
> +#define CSIHOST_RESETN		0x10
> +#define CSIHOST_ERR1		0x20
> +#define CSIHOST_ERR2		0x24
> +#define CSIHOST_MSK1		0x28
> +#define CSIHOST_MSK2		0x2c
> +#define CSIHOST_CONTROL		0x40
> +
> +#define SW_CPHY_EN(x)		((x) << 0)
> +#define SW_DSI_EN(x)		((x) << 4)
> +#define SW_DATATYPE_FS(x)	((x) << 8)
> +#define SW_DATATYPE_FE(x)	((x) << 14)
> +#define SW_DATATYPE_LS(x)	((x) << 20)
> +#define SW_DATATYPE_LE(x)	((x) << 26)
> +
> +#endif
> 

Regards,

	Hans
Robin Murphy April 16, 2020, 12:48 p.m. UTC | #2
Hi Maxime,

Just a handful of drive-by cleanup suggestions to help this smell less 
like a BSP driver...

(one day I still hope to get round to playing with what appears to be 
the DVP interface populated but unused inside my RK3288 box, and the 
camera module I picked up to supposedly fit it, but alas not today)

On 2020-04-03 3:21 pm, Maxime Chevallier wrote:
[...]
> +static int rkcif_plat_probe(struct platform_device *pdev)
> +{
> +	const struct of_device_id *match;
> +	struct device_node *node = pdev->dev.of_node;
> +	struct device *dev = &pdev->dev;
> +	struct v4l2_device *v4l2_dev;
> +	struct rkcif_device *cif_dev;
> +	const struct cif_match_data *data;
> +	struct resource *res;
> +	int i, ret, irq;
> +
> +	match = of_match_node(rkcif_plat_of_match, node);
> +	if (IS_ERR(match))
> +		return PTR_ERR(match);

of_device_get_match_data()

> +
> +	cif_dev = devm_kzalloc(dev, sizeof(*cif_dev), GFP_KERNEL);
> +	if (!cif_dev)
> +		return -ENOMEM;
> +
> +	dev_set_drvdata(dev, cif_dev);
> +	cif_dev->dev = dev;
> +
> +	irq = platform_get_irq(pdev, 0);
> +	if (irq < 0)
> +		return irq;
> +
> +	ret = devm_request_irq(dev, irq, rkcif_irq_handler, IRQF_SHARED,
> +			       dev_driver_string(dev), dev);
> +	if (ret < 0) {
> +		dev_err(dev, "request irq failed: %d\n", ret);
> +		return ret;
> +	}
> +
> +	cif_dev->irq = irq;
> +	data = match->data;
> +	cif_dev->chip_id = data->chip_id;

It pretty much breaks even at the moment, but consider just holding a 
pointer to data itself rather than copying multiple fields into cif_dev, 
particularly if there's any likelihood of adding more in future. The 
couple of places clk_size and chip_id are used here don't really look 
like critical fast-paths where cache/TLB locality is super-important.

> +
> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> +	cif_dev->base_addr = devm_ioremap_resource(dev, res);

devm_platform_ioremap_resource()

> +
> +	if (IS_ERR(cif_dev->base_addr))
> +		return PTR_ERR(cif_dev->base_addr);
> +
> +	if (data->clks_num > RKCIF_MAX_BUS_CLK ||
> +		data->rsts_num > RKCIF_MAX_RESET) {

It's silly to have runtime checks of constants - BUILD_BUG_ON() 
somewhere if you really want to validate that the driver data is 
self-consistent.

> +		dev_err(dev, "out of range: clks(%d %d) rsts(%d %d)\n",
> +			data->clks_num, RKCIF_MAX_BUS_CLK,
> +			data->rsts_num, RKCIF_MAX_RESET);
> +		return -EINVAL;
> +	}
> +
> +	for (i = 0; i < data->clks_num; i++) {
> +		struct clk *clk = devm_clk_get(dev, data->clks[i]);
> +
> +		if (IS_ERR(clk)) {
> +			dev_err(dev, "failed to get %s\n", data->clks[i]);
> +			return PTR_ERR(clk);
> +		}
> +
> +		cif_dev->clks[i] = clk;
> +	}

All of the clock handling looks like it could use the clk_bulk_* APIs.

> +
> +	cif_dev->clk_size = data->clks_num;
> +
> +	for (i = 0; i < data->rsts_num; i++) {
> +		struct reset_control *rst =
> +			devm_reset_control_get(dev, data->rsts[i]);
> +		if (IS_ERR(rst)) {
> +			dev_err(dev, "failed to get %s\n", data->rsts[i]);
> +			return PTR_ERR(rst);
> +		}
> +		cif_dev->cif_rst[i] = rst;
> +	}

And possibly the reset_control_array_* APIs for resets? (assuming there 
isn't a subtle ordering requirement implicit in data->rsts)

> +
> +	/* Initialize the stream */
> +	rkcif_stream_init(cif_dev);
> +
> +	strlcpy(cif_dev->media_dev.model, "rkcif",
> +		sizeof(cif_dev->media_dev.model));
> +	cif_dev->media_dev.dev = &pdev->dev;
> +	v4l2_dev = &cif_dev->v4l2_dev;
> +	v4l2_dev->mdev = &cif_dev->media_dev;
> +	strlcpy(v4l2_dev->name, "rkcif", sizeof(v4l2_dev->name));
> +	v4l2_ctrl_handler_init(&cif_dev->ctrl_handler, 8);
> +	v4l2_dev->ctrl_handler = &cif_dev->ctrl_handler;
> +
> +	ret = v4l2_device_register(cif_dev->dev, &cif_dev->v4l2_dev);
> +	if (ret < 0)
> +		return ret;
> +
> +	media_device_init(&cif_dev->media_dev);
> +
> +	ret = media_device_register(&cif_dev->media_dev);
> +	if (ret < 0) {
> +		v4l2_err(v4l2_dev, "Failed to register media device: %d\n",
> +			 ret);
> +		goto err_unreg_v4l2_dev;
> +	}
> +
> +	/* create & register platefom subdev (from of_node) */
> +	ret = rkcif_register_platform_subdevs(cif_dev);
> +	if (ret < 0)
> +		goto err_unreg_media_dev;
> +
> +	ret = of_reserved_mem_device_init(dev);
> +	if (ret)
> +		v4l2_warn(v4l2_dev, "No reserved memory region assign to CIF\n");

It feels like that should probably happen earlier in the "resource 
acquisition" part of probe, before any external init/register calls that 
in principle could want to preallocate DMA buffers.

Also, is the lack of reserved memory really a warn-level condition? The 
DT binding doesn't even appear to treat a "memory-region" property as 
legal, and with CMA or (as appears to be the case for at least RK3288) 
an IOMMU, it should be largely moot anyway.

Robin.

> +
> +	pm_runtime_enable(&pdev->dev);
> +
> +	return 0;
> +
> +err_unreg_media_dev:
> +	media_device_unregister(&cif_dev->media_dev);
> +err_unreg_v4l2_dev:
> +	v4l2_device_unregister(&cif_dev->v4l2_dev);
> +	return ret;
> +}
Maxime Chevallier June 1, 2020, 6:58 a.m. UTC | #3
Hi Hans,

On Thu, 16 Apr 2020 11:35:41 +0200
Hans Verkuil <hverkuil-cisco@xs4all.nl> wrote:

I'm very sorry I missed a lot of your reviews in my V2, that wasn't on
purpose. I'll fix this on the next iteration, sorry about that.

Thank you very much for your review !

Maxime

>+Helen Koike (rkisp1 maintainer)
>
>A quick review below...
>
>On 03/04/2020 16:21, Maxime Chevallier wrote:
>> Introduce a driver for the camera interface on some Rockchip platforms.
>> 
>> This controller supports CSI2, Parallel and BT656 interfaces, but for
>> now only the parallel interface could be tested, hence it's the only one
>> that's supported in the first version of this driver.
>> 
>> This controller can be fond on PX30, RK1808, RK3128, RK3288 and RK3288,  
>
>fond -> found
>
>'RK3288 and RK3288'? Typo?
>
>> but for now it's only be tested on PX30.
>> 
>> Most of this driver was written follwing the BSP driver from rockchip,  
>
>follwing -> following
>
>> removing the parts that either didn't fit correctly the guidelines, or
>> that couldn't be tested.
>> 
>> This basic version doesn't support cropping nor scaling, and is only
>> designed with one sensor being attached to it a any time.  
>
>a any -> at any
>
>Make sure you test with v4l2-compliance, in fact, I need to see the output
>of 'v4l2-compliance -s' when you post v2. There shouldn't be any warnings
>or fails. Make sure you build v4l2-compliance from the git repo
>(https://git.linuxtv.org//v4l-utils.git) directly, that ensures that you
>use the latest and greatest version.
>
>How does this driver compare to drivers/staging/media/rkisp1? Is the ISP
>hardware completely different (it probably is, just checking)?
>
>How complex is the ISP hardware? This driver is a regular video driver,
>but should it move to a media controller based driver instead, like rkisp1?
>
>I don't know the hardware, so I can't tell.
>
>> 
>> Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
>> ---
>>  drivers/media/platform/Kconfig                |   13 +
>>  drivers/media/platform/Makefile               |    1 +
>>  drivers/media/platform/rockchip/cif/Makefile  |    3 +
>>  drivers/media/platform/rockchip/cif/capture.c | 1170 +++++++++++++++++
>>  drivers/media/platform/rockchip/cif/dev.c     |  407 ++++++
>>  drivers/media/platform/rockchip/cif/dev.h     |  208 +++
>>  drivers/media/platform/rockchip/cif/regs.h    |  256 ++++
>>  7 files changed, 2058 insertions(+)
>>  create mode 100644 drivers/media/platform/rockchip/cif/Makefile
>>  create mode 100644 drivers/media/platform/rockchip/cif/capture.c
>>  create mode 100644 drivers/media/platform/rockchip/cif/dev.c
>>  create mode 100644 drivers/media/platform/rockchip/cif/dev.h
>>  create mode 100644 drivers/media/platform/rockchip/cif/regs.h
>> 
>> diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
>> index f65e98d3adf2..d2f413a99886 100644
>> --- a/drivers/media/platform/Kconfig
>> +++ b/drivers/media/platform/Kconfig
>> @@ -460,6 +460,19 @@ config VIDEO_ROCKCHIP_RGA
>>  
>>  	  To compile this driver as a module choose m here.
>>  
>> +config VIDEO_ROCKCHIP_CIF
>> +	tristate "Rockchip Camera Interface"
>> +	depends on VIDEO_DEV && VIDEO_V4L2
>> +	depends on ARCH_ROCKCHIP || COMPILE_TEST
>> +	select VIDEOBUF2_DMA_SG
>> +	select VIDEOBUF2_DMA_CONTIG
>> +	select V4L2_FWNODE
>> +	select V4L2_MEM2MEM_DEV
>> +	help
>> +	  This is a v4l2 driver for Rockchip SOC Camera interface.
>> +
>> +	  To compile this driver as a module choose m here.
>> +
>>  config VIDEO_TI_VPE
>>  	tristate "TI VPE (Video Processing Engine) driver"
>>  	depends on VIDEO_DEV && VIDEO_V4L2
>> diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
>> index d13db96e3015..67e7ac034be1 100644
>> --- a/drivers/media/platform/Makefile
>> +++ b/drivers/media/platform/Makefile
>> @@ -68,6 +68,7 @@ obj-$(CONFIG_VIDEO_RENESAS_JPU)		+= rcar_jpu.o
>>  obj-$(CONFIG_VIDEO_RENESAS_VSP1)	+= vsp1/
>>  
>>  obj-$(CONFIG_VIDEO_ROCKCHIP_RGA)	+= rockchip/rga/
>> +obj-$(CONFIG_VIDEO_ROCKCHIP_CIF)	+= rockchip/cif/
>>  
>>  obj-y	+= omap/
>>  
>> diff --git a/drivers/media/platform/rockchip/cif/Makefile b/drivers/media/platform/rockchip/cif/Makefile
>> new file mode 100644
>> index 000000000000..727990824316
>> --- /dev/null
>> +++ b/drivers/media/platform/rockchip/cif/Makefile
>> @@ -0,0 +1,3 @@
>> +# SPDX-License-Identifier: GPL-2.0
>> +obj-$(CONFIG_VIDEO_ROCKCHIP_CIF) += video_rkcif.o
>> +video_rkcif-objs += dev.o capture.o
>> diff --git a/drivers/media/platform/rockchip/cif/capture.c b/drivers/media/platform/rockchip/cif/capture.c
>> new file mode 100644
>> index 000000000000..9df7757c6ed9
>> --- /dev/null
>> +++ b/drivers/media/platform/rockchip/cif/capture.c
>> @@ -0,0 +1,1170 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Rockchip CIF Driver
>> + *
>> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
>> + * Copyright (C) 2020 Maxime Chevallier <maxime.chevallier@bootlin.com>
>> + */
>> +
>> +#include <linux/delay.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/reset.h>
>> +#include <media/v4l2-common.h>
>> +#include <media/v4l2-event.h>
>> +#include <media/v4l2-fh.h>
>> +#include <media/v4l2-fwnode.h>
>> +#include <media/v4l2-ioctl.h>
>> +#include <media/v4l2-mc.h>
>> +#include <media/v4l2-subdev.h>
>> +#include <media/videobuf2-dma-contig.h>
>> +
>> +#include "dev.h"
>> +#include "regs.h"
>> +
>> +#define CIF_REQ_BUFS_MIN	1
>> +#define CIF_MIN_WIDTH		64
>> +#define CIF_MIN_HEIGHT		64
>> +#define CIF_MAX_WIDTH		8192
>> +#define CIF_MAX_HEIGHT		8192
>> +
>> +#define RKCIF_PLANE_Y			0
>> +#define RKCIF_PLANE_CBCR		1
>> +
>> +#define CIF_FETCH_Y_LAST_LINE(VAL) ((VAL) & 0x1fff)
>> +/* Check if swap y and c in bt1120 mode */
>> +#define CIF_FETCH_IS_Y_FIRST(VAL) ((VAL) & 0xf)
>> +
>> +/* Get xsubs and ysubs for fourcc formats
>> + *
>> + * @xsubs: horizontal color samples in a 4*4 matrix, for yuv
>> + * @ysubs: vertical color samples in a 4*4 matrix, for yuv
>> + */
>> +static int fcc_xysubs(u32 fcc, u32 *xsubs, u32 *ysubs)
>> +{
>> +	switch (fcc) {
>> +	case V4L2_PIX_FMT_NV16:
>> +	case V4L2_PIX_FMT_NV61:
>> +		*xsubs = 2;
>> +		*ysubs = 1;
>> +		break;
>> +	case V4L2_PIX_FMT_NV21:
>> +	case V4L2_PIX_FMT_NV12:
>> +		*xsubs = 2;
>> +		*ysubs = 2;
>> +		break;
>> +	default:
>> +		return -EINVAL;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct cif_output_fmt out_fmts[] = {
>> +	{
>> +		.fourcc = V4L2_PIX_FMT_NV16,
>> +		.cplanes = 2,
>> +		.mplanes = 1,
>> +		.fmt_val = YUV_OUTPUT_422 | UV_STORAGE_ORDER_UVUV,
>> +		.bpp = { 8, 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_NV61,
>> +		.fmt_val = YUV_OUTPUT_422 | UV_STORAGE_ORDER_VUVU,
>> +		.cplanes = 2,
>> +		.mplanes = 1,
>> +		.bpp = { 8, 16 },
>> +	},
>> +	{
>> +		.fourcc = V4L2_PIX_FMT_NV12,
>> +		.fmt_val = YUV_OUTPUT_420 | UV_STORAGE_ORDER_UVUV,
>> +		.cplanes = 2,
>> +		.mplanes = 1,
>> +		.bpp = { 8, 16 },
>> +		.mbus = MEDIA_BUS_FMT_UYVY8_2X8,
>> +	},
>> +	{
>> +		.fourcc = V4L2_PIX_FMT_NV21,
>> +		.fmt_val = YUV_OUTPUT_420 | UV_STORAGE_ORDER_VUVU,
>> +		.cplanes = 2,
>> +		.mplanes = 1,
>> +		.bpp = { 8, 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_RGB24,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 24 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_RGB565,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_BGR666,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 18 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SRGGB8,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 8 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SGRBG8,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 8 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SGBRG8,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 8 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SBGGR8,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 8 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SRGGB10,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SGRBG10,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SGBRG10,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SBGGR10,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SRGGB12,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SGRBG12,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SGBRG12,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SBGGR12,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_SBGGR16,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}, {
>> +		.fourcc = V4L2_PIX_FMT_Y16,
>> +		.cplanes = 1,
>> +		.mplanes = 1,
>> +		.bpp = { 16 },
>> +	}
>> +};
>> +
>> +static const struct cif_input_fmt in_fmts[] = {
>> +	{
>> +		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
>> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YUYV,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
>> +		.fmt_type	= CIF_FMT_TYPE_YUV,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
>> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YUYV,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
>> +		.fmt_type	= CIF_FMT_TYPE_YUV,
>> +		.field		= V4L2_FIELD_INTERLACED,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_YVYU8_2X8,
>> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YVYU,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
>> +		.fmt_type	= CIF_FMT_TYPE_YUV,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_YVYU8_2X8,
>> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YVYU,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
>> +		.fmt_type	= CIF_FMT_TYPE_YUV,
>> +		.field		= V4L2_FIELD_INTERLACED,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_UYVY8_2X8,
>> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_UYVY,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
>> +		.fmt_type	= CIF_FMT_TYPE_YUV,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_UYVY8_2X8,
>> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_UYVY,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
>> +		.fmt_type	= CIF_FMT_TYPE_YUV,
>> +		.field		= V4L2_FIELD_INTERLACED,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_VYUY8_2X8,
>> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_VYUY,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
>> +		.fmt_type	= CIF_FMT_TYPE_YUV,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_VYUY8_2X8,
>> +		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_VYUY,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
>> +		.fmt_type	= CIF_FMT_TYPE_YUV,
>> +		.field		= V4L2_FIELD_INTERLACED,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SBGGR8_1X8,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SGBRG8_1X8,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SGRBG8_1X8,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SRGGB8_1X8,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SBGGR10_1X10,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SGBRG10_1X10,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SGRBG10_1X10,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SRGGB10_1X10,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SBGGR12_1X12,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SGBRG12_1X12,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SGRBG12_1X12,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_SRGGB12_1X12,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_RGB888_1X24,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RGB888,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_Y8_1X8,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_Y10_1X10,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}, {
>> +		.mbus_code	= MEDIA_BUS_FMT_Y12_1X12,
>> +		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
>> +		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
>> +		.fmt_type	= CIF_FMT_TYPE_RAW,
>> +		.field		= V4L2_FIELD_NONE,
>> +	}
>> +};
>> +
>> +static const struct
>> +cif_input_fmt *get_input_fmt(struct v4l2_subdev *sd)  
>
>Don't put a linebreak after 'struct'. You can do this, though:
>
>static const struct cif_input_fmt *
>get_input_fmt(struct v4l2_subdev *sd)
>
>However, the whole prototype is just 72 chars long, so just keep it
>in one line.
>
>> +{
>> +	struct v4l2_subdev_format fmt;
>> +	int ret;
>> +	u32 i;
>> +
>> +	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
>> +	fmt.pad = 0;
>> +	ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
>> +	if (ret < 0) {
>> +		v4l2_warn(sd->v4l2_dev,
>> +			  "sensor fmt invalid, set to default size\n");
>> +		goto set_default;
>> +	}
>> +
>> +	for (i = 0; i < ARRAY_SIZE(in_fmts); i++)
>> +		if (fmt.format.code == in_fmts[i].mbus_code &&
>> +		    fmt.format.field == in_fmts[i].field)
>> +			return &in_fmts[i];
>> +
>> +	v4l2_err(sd->v4l2_dev, "remote sensor mbus code not supported\n");
>> +
>> +set_default:
>> +	return NULL;
>> +}
>> +
>> +	static const struct  
>
>Leading tab? I expect 'checkpatch.pl --strict' to catch that. Please run that
>before posting v2.
>
>> +cif_output_fmt *find_output_fmt(struct rkcif_stream *stream, u32 pixelfmt)
>> +{
>> +	const struct cif_output_fmt *fmt;
>> +	u32 i;
>> +
>> +	for (i = 0; i < ARRAY_SIZE(out_fmts); i++) {
>> +		fmt = &out_fmts[i];
>> +		if (fmt->fourcc == pixelfmt)
>> +			return fmt;
>> +	}
>> +
>> +	return NULL;
>> +}
>> +
>> +/***************************** stream operations ******************************/
>> +static void rkcif_assign_new_buffer_oneframe(struct rkcif_stream *stream)
>> +{
>> +	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
>> +	struct rkcif_device *dev = stream->cifdev;
>> +	void __iomem *base = dev->base_addr;
>> +
>> +	/* Set up an empty buffer for the next frame */
>> +	spin_lock(&stream->vbq_lock);
>> +	if (!list_empty(&stream->buf_head)) {
>> +		stream->curr_buf = list_first_entry(&stream->buf_head,
>> +					struct rkcif_buffer, queue);
>> +		list_del(&stream->curr_buf->queue);
>> +	} else {
>> +		stream->curr_buf = NULL;
>> +	}
>> +	spin_unlock(&stream->vbq_lock);
>> +
>> +	if (stream->curr_buf) {
>> +		write_cif_reg(base, CIF_FRM0_ADDR_Y,
>> +			      stream->curr_buf->buff_addr[RKCIF_PLANE_Y]);
>> +		write_cif_reg(base, CIF_FRM0_ADDR_UV,
>> +			      stream->curr_buf->buff_addr[RKCIF_PLANE_CBCR]);
>> +		write_cif_reg(base, CIF_FRM1_ADDR_Y,
>> +			      stream->curr_buf->buff_addr[RKCIF_PLANE_Y]);
>> +		write_cif_reg(base, CIF_FRM1_ADDR_UV,
>> +			      stream->curr_buf->buff_addr[RKCIF_PLANE_CBCR]);
>> +	} else {
>> +		write_cif_reg(base, CIF_FRM0_ADDR_Y, dummy_buf->dma_addr);
>> +		write_cif_reg(base, CIF_FRM0_ADDR_UV, dummy_buf->dma_addr);
>> +		write_cif_reg(base, CIF_FRM1_ADDR_Y, dummy_buf->dma_addr);
>> +		write_cif_reg(base, CIF_FRM1_ADDR_UV, dummy_buf->dma_addr);
>> +	}
>> +}
>> +
>> +static void rkcif_stream_stop(struct rkcif_stream *stream)
>> +{
>> +	struct rkcif_device *cif_dev = stream->cifdev;
>> +	void __iomem *base = cif_dev->base_addr;
>> +	u32 val;
>> +
>> +	val = read_cif_reg(base, CIF_CTRL);
>> +	write_cif_reg(base, CIF_CTRL, val & (~ENABLE_CAPTURE));
>> +	write_cif_reg(base, CIF_INTEN, 0x0);
>> +	write_cif_reg(base, CIF_INTSTAT, 0x3ff);
>> +	write_cif_reg(base, CIF_FRAME_STATUS, 0x0);
>> +
>> +	stream->state = RKCIF_STATE_READY;
>> +}
>> +
>> +static int rkcif_queue_setup(struct vb2_queue *queue,
>> +			     unsigned int *num_buffers,
>> +			     unsigned int *num_planes,
>> +			     unsigned int sizes[],
>> +			     struct device *alloc_devs[])
>> +{
>> +	struct rkcif_stream *stream = queue->drv_priv;
>> +	const struct v4l2_pix_format_mplane *pixm;
>> +	const struct cif_output_fmt *cif_fmt;
>> +	u32 i;
>> +
>> +	pixm = &stream->pixm;
>> +	cif_fmt = stream->cif_fmt_out;
>> +
>> +	if (*num_planes) {
>> +		if (*num_planes != cif_fmt->mplanes)
>> +			return -EINVAL;
>> +
>> +		for (i = 0; i < cif_fmt->mplanes; i++)
>> +			if (sizes[i] < pixm->plane_fmt[i].sizeimage)
>> +				return -EINVAL;
>> +		return 0;
>> +	}
>> +
>> +	*num_planes = cif_fmt->mplanes;
>> +
>> +	for (i = 0; i < cif_fmt->mplanes; i++) {
>> +		const struct v4l2_plane_pix_format *plane_fmt;
>> +
>> +		plane_fmt = &pixm->plane_fmt[i];
>> +		sizes[i] = plane_fmt->sizeimage;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +/*
>> + * The vb2_buffer are stored in rkcif_buffer, in order to unify
>> + * mplane buffer and none-mplane buffer.
>> + */
>> +static void rkcif_buf_queue(struct vb2_buffer *vb)
>> +{
>> +	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
>> +	struct rkcif_buffer *cifbuf = to_rkcif_buffer(vbuf);
>> +	struct vb2_queue *queue = vb->vb2_queue;
>> +	struct rkcif_stream *stream = queue->drv_priv;
>> +	struct v4l2_pix_format_mplane *pixm = &stream->pixm;
>> +	const struct cif_output_fmt *fmt = stream->cif_fmt_out;
>> +	unsigned long lock_flags = 0;
>> +	int i;
>> +
>> +	memset(cifbuf->buff_addr, 0, sizeof(cifbuf->buff_addr));
>> +	/* If mplanes > 1, every c-plane has its own m-plane,
>> +	 * otherwise, multiple c-planes are in the same m-plane
>> +	 */
>> +	for (i = 0; i < fmt->mplanes; i++)
>> +		cifbuf->buff_addr[i] = vb2_dma_contig_plane_dma_addr(vb, i);
>> +
>> +	if (fmt->mplanes == 1) {
>> +		for (i = 0; i < fmt->cplanes - 1; i++)
>> +			cifbuf->buff_addr[i + 1] = cifbuf->buff_addr[i] +
>> +				pixm->plane_fmt[i].bytesperline * pixm->height;
>> +	}
>> +
>> +	spin_lock_irqsave(&stream->vbq_lock, lock_flags);
>> +	list_add_tail(&cifbuf->queue, &stream->buf_head);
>> +	spin_unlock_irqrestore(&stream->vbq_lock, lock_flags);
>> +}
>> +
>> +static int rkcif_create_dummy_buf(struct rkcif_stream *stream)
>> +{  
>
>Why do you need a dummy buffer? That's very unusual, so at the very least
>this needs comments.
>
>> +	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
>> +	struct rkcif_device *dev = stream->cifdev;
>> +
>> +	/* get a maximum plane size */
>> +	dummy_buf->size = max3(stream->pixm.plane_fmt[0].bytesperline *
>> +		stream->pixm.height,
>> +		stream->pixm.plane_fmt[1].sizeimage,
>> +		stream->pixm.plane_fmt[2].sizeimage);
>> +
>> +	dummy_buf->vaddr = dma_alloc_coherent(dev->dev, dummy_buf->size,
>> +					      &dummy_buf->dma_addr,
>> +					      GFP_KERNEL);
>> +	if (!dummy_buf->vaddr) {
>> +		v4l2_err(&dev->v4l2_dev,
>> +			 "Failed to allocate the memory for dummy buffer\n");
>> +		return -ENOMEM;
>> +	}
>> +
>> +	v4l2_info(&dev->v4l2_dev, "Allocate dummy buffer, size: 0x%08x\n",
>> +		  dummy_buf->size);
>> +
>> +	return 0;
>> +}
>> +
>> +static void rkcif_destroy_dummy_buf(struct rkcif_stream *stream)
>> +{
>> +	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
>> +	struct rkcif_device *dev = stream->cifdev;
>> +
>> +	dma_free_coherent(dev->dev, dummy_buf->size,
>> +			  dummy_buf->vaddr, dummy_buf->dma_addr);
>> +}
>> +
>> +static void rkcif_stop_streaming(struct vb2_queue *queue)
>> +{
>> +	struct rkcif_stream *stream = queue->drv_priv;
>> +	struct rkcif_device *dev = stream->cifdev;
>> +	struct rkcif_buffer *buf;
>> +	struct v4l2_subdev *sd;
>> +	int ret;
>> +
>> +	stream->stopping = true;
>> +	ret = wait_event_timeout(stream->wq_stopped,
>> +				 stream->state != RKCIF_STATE_STREAMING,
>> +				 msecs_to_jiffies(1000));
>> +	if (!ret) {
>> +		rkcif_stream_stop(stream);
>> +		stream->stopping = false;
>> +	}
>> +	pm_runtime_put(dev->dev);
>> +
>> +	/* stop the sub device*/
>> +	sd = dev->sensor.sd;
>> +	v4l2_subdev_call(sd, video, s_stream, 0);
>> +	v4l2_subdev_call(sd, core, s_power, 0);
>> +
>> +	/* release buffers */
>> +	if (stream->curr_buf) {
>> +		list_add_tail(&stream->curr_buf->queue, &stream->buf_head);
>> +		stream->curr_buf = NULL;
>> +	}
>> +	if (stream->next_buf) {
>> +		list_add_tail(&stream->next_buf->queue, &stream->buf_head);
>> +		stream->next_buf = NULL;
>> +	}
>> +
>> +	while (!list_empty(&stream->buf_head)) {
>> +		buf = list_first_entry(&stream->buf_head,
>> +				       struct rkcif_buffer, queue);
>> +		list_del(&buf->queue);
>> +		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
>> +	}
>> +
>> +	rkcif_destroy_dummy_buf(stream);
>> +}
>> +
>> +static u32 rkcif_determine_input_mode(struct rkcif_device *dev)
>> +{
>> +	struct rkcif_sensor_info *sensor_info = &dev->sensor;
>> +	struct rkcif_stream *stream = &dev->stream;
>> +	v4l2_std_id std;
>> +	u32 mode = INPUT_MODE_YUV;
>> +	int ret;
>> +
>> +	ret = v4l2_subdev_call(sensor_info->sd, video, querystd, &std);
>> +	if (ret == 0) {
>> +		/* retrieve std from sensor if exist */
>> +		switch (std) {
>> +		case V4L2_STD_NTSC:
>> +			mode = INPUT_MODE_NTSC;
>> +			break;
>> +		case V4L2_STD_PAL:
>> +			mode = INPUT_MODE_PAL;
>> +			break;
>> +		case V4L2_STD_ATSC:
>> +			mode = INPUT_MODE_BT1120;
>> +			break;  
>
>Huh? V4L2_STD_* is only used for SDTV video receivers (i.e. Composite, S-Video,
>analog TV). Sensors do not use it. So what is going on here?
>
>And V4L2_STD_ATSC is deprecated and should not be used in new drivers.
>
>> +		default:
>> +			v4l2_err(&dev->v4l2_dev,
>> +				 "std: %lld is not supported", std);  
>
>Missing break.
>
>> +		}
>> +	} else {
>> +		/* determine input mode by mbus_code (fmt_type) */
>> +		switch (stream->cif_fmt_in->fmt_type) {
>> +		case CIF_FMT_TYPE_YUV:
>> +			mode = INPUT_MODE_YUV;
>> +			break;
>> +		case CIF_FMT_TYPE_RAW:
>> +			mode = INPUT_MODE_RAW;
>> +			break;
>> +		}
>> +	}
>> +
>> +	return mode;
>> +}
>> +
>> +static inline u32 rkcif_scl_ctl(struct rkcif_stream *stream)
>> +{
>> +	u32 fmt_type = stream->cif_fmt_in->fmt_type;
>> +
>> +	return (fmt_type == CIF_FMT_TYPE_YUV) ?
>> +		ENABLE_YUV_16BIT_BYPASS : ENABLE_RAW_16BIT_BYPASS;
>> +}
>> +
>> +static int rkcif_stream_start(struct rkcif_stream *stream)
>> +{
>> +	u32 val, mbus_flags, href_pol, vsync_pol,
>> +	    xfer_mode = 0, yc_swap = 0, skip_top = 0;
>> +	struct rkcif_device *dev = stream->cifdev;
>> +	struct rkcif_sensor_info *sensor_info;
>> +	void __iomem *base = dev->base_addr;
>> +
>> +	sensor_info = &dev->sensor;
>> +	stream->frame_idx = 0;
>> +
>> +	mbus_flags = sensor_info->mbus.flags;
>> +	href_pol = (mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) ?
>> +			HSY_HIGH_ACTIVE : HSY_LOW_ACTIVE;
>> +	vsync_pol = (mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) ?
>> +			VSY_HIGH_ACTIVE : VSY_LOW_ACTIVE;
>> +
>> +	if (rkcif_determine_input_mode(dev) == INPUT_MODE_BT1120) {
>> +		if (stream->cif_fmt_in->field == V4L2_FIELD_NONE)
>> +			xfer_mode = BT1120_TRANSMIT_PROGRESS;
>> +		else
>> +			xfer_mode = BT1120_TRANSMIT_INTERFACE;
>> +		if (!CIF_FETCH_IS_Y_FIRST(stream->cif_fmt_in->dvp_fmt_val))
>> +			yc_swap = BT1120_YC_SWAP;
>> +	}
>> +
>> +	val = vsync_pol | href_pol | rkcif_determine_input_mode(dev) |
>> +	      stream->cif_fmt_out->fmt_val | stream->cif_fmt_in->dvp_fmt_val |
>> +	      xfer_mode | yc_swap;
>> +	write_cif_reg(base, CIF_FOR, val);
>> +	val = stream->pixm.width;
>> +	if (stream->cif_fmt_in->fmt_type == CIF_FMT_TYPE_RAW)
>> +		val = stream->pixm.width * 2;
>> +	write_cif_reg(base, CIF_VIR_LINE_WIDTH, val);
>> +	write_cif_reg(base, CIF_SET_SIZE,
>> +		      stream->pixm.width | (stream->pixm.height << 16));
>> +
>> +	v4l2_subdev_call(sensor_info->sd, sensor, g_skip_top_lines, &skip_top);
>> +
>> +	write_cif_reg(base, CIF_CROP, skip_top << CIF_CROP_Y_SHIFT);
>> +	write_cif_reg(base, CIF_FRAME_STATUS, FRAME_STAT_CLS);
>> +	write_cif_reg(base, CIF_INTSTAT, INTSTAT_CLS);
>> +	write_cif_reg(base, CIF_SCL_CTRL, rkcif_scl_ctl(stream));
>> +
>> +	rkcif_assign_new_buffer_oneframe(stream);
>> +
>> +	write_cif_reg(base, CIF_INTEN, FRAME_END_EN | LINE_ERR_EN |
>> +			    PST_INF_FRAME_END);
>> +
>> +	if (dev->chip_id == CHIP_RK1808_CIF &&
>> +	    rkcif_determine_input_mode(dev) == INPUT_MODE_BT1120)
>> +		write_cif_reg(base, CIF_CTRL,
>> +			      AXI_BURST_16 | MODE_PINGPONG | ENABLE_CAPTURE);
>> +	else
>> +		write_cif_reg(base, CIF_CTRL,
>> +			      AXI_BURST_16 | MODE_ONEFRAME | ENABLE_CAPTURE);
>> +
>> +	stream->state = RKCIF_STATE_STREAMING;
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkcif_start_streaming(struct vb2_queue *queue, unsigned int count)
>> +{
>> +	struct rkcif_stream *stream = queue->drv_priv;
>> +	struct rkcif_device *dev = stream->cifdev;
>> +	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
>> +	struct v4l2_subdev *sd;
>> +	int ret;
>> +
>> +	if (WARN_ON(stream->state != RKCIF_STATE_READY)) {
>> +		ret = -EBUSY;
>> +		v4l2_err(v4l2_dev, "stream in busy state\n");
>> +		goto destroy_buf;
>> +	}
>> +
>> +	stream->cif_fmt_in = get_input_fmt(dev->sensor.sd);
>> +
>> +	ret = rkcif_create_dummy_buf(stream);
>> +	if (ret < 0) {
>> +		v4l2_err(v4l2_dev, "Failed to create dummy_buf, %d\n", ret);
>> +		goto destroy_buf;
>> +	}
>> +
>> +	ret = pm_runtime_get_sync(dev->dev);
>> +	if (ret < 0) {
>> +		v4l2_err(v4l2_dev, "Failed to get runtime pm, %d\n", ret);
>> +		goto destroy_dummy_buf;
>> +	}
>> +
>> +	/* start sub-devices */
>> +	sd = dev->sensor.sd;
>> +	ret = v4l2_subdev_call(sd, core, s_power, 1);
>> +	if (ret < 0 && ret != -ENOIOCTLCMD)
>> +		goto runtime_put;
>> +	ret = v4l2_subdev_call(sd, video, s_stream, 1);
>> +	if (ret < 0)
>> +		goto subdev_poweroff;
>> +
>> +	ret = rkcif_stream_start(stream);
>> +	if (ret < 0)
>> +		goto stop_stream;
>> +
>> +	return 0;
>> +
>> +stop_stream:
>> +	rkcif_stream_stop(stream);
>> +subdev_poweroff:
>> +	v4l2_subdev_call(sd, core, s_power, 0);
>> +runtime_put:
>> +	pm_runtime_put(dev->dev);
>> +destroy_dummy_buf:
>> +	rkcif_destroy_dummy_buf(stream);
>> +destroy_buf:
>> +	while (!list_empty(&stream->buf_head)) {
>> +		struct rkcif_buffer *buf;
>> +
>> +		buf = list_first_entry(&stream->buf_head,
>> +				       struct rkcif_buffer, queue);
>> +		list_del(&buf->queue);
>> +		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
>> +	}
>> +
>> +	return ret;
>> +}
>> +
>> +static struct vb2_ops rkcif_vb2_ops = {
>> +	.queue_setup = rkcif_queue_setup,
>> +	.buf_queue = rkcif_buf_queue,
>> +	.wait_prepare = vb2_ops_wait_prepare,
>> +	.wait_finish = vb2_ops_wait_finish,
>> +	.stop_streaming = rkcif_stop_streaming,
>> +	.start_streaming = rkcif_start_streaming,
>> +};
>> +
>> +static int rkcif_init_vb2_queue(struct vb2_queue *q,
>> +				struct rkcif_stream *stream,
>> +				enum v4l2_buf_type buf_type)
>> +{
>> +	q->type = buf_type;
>> +	q->io_modes = VB2_MMAP | VB2_DMABUF;
>> +	q->drv_priv = stream;
>> +	q->ops = &rkcif_vb2_ops;
>> +	q->mem_ops = &vb2_dma_contig_memops;
>> +	q->buf_struct_size = sizeof(struct rkcif_buffer);
>> +	q->min_buffers_needed = CIF_REQ_BUFS_MIN;
>> +	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
>> +	q->lock = &stream->vlock;
>> +	q->dev = stream->cifdev->dev;
>> +
>> +	return vb2_queue_init(q);
>> +}
>> +
>> +static void rkcif_set_fmt(struct rkcif_stream *stream,
>> +			  struct v4l2_pix_format_mplane *pixm,
>> +			  bool try)
>> +{
>> +	const struct cif_output_fmt *fmt;
>> +	struct v4l2_rect input_rect;
>> +	unsigned int imagesize = 0, planes;
>> +	u32 xsubs = 1, ysubs = 1, i;
>> +
>> +	fmt = find_output_fmt(stream, pixm->pixelformat);
>> +	if (!fmt)
>> +		fmt = &out_fmts[0];
>> +
>> +	input_rect.width = CIF_MAX_WIDTH;
>> +	input_rect.height = CIF_MAX_HEIGHT;
>> +
>> +	pixm->width = clamp_t(u32, pixm->width,
>> +				CIF_MIN_WIDTH, input_rect.width);
>> +	pixm->height = clamp_t(u32, pixm->height,
>> +				CIF_MIN_HEIGHT, input_rect.height);
>> +
>> +	pixm->num_planes = fmt->mplanes;
>> +	pixm->quantization = V4L2_QUANTIZATION_DEFAULT;
>> +	pixm->colorspace = V4L2_COLORSPACE_SRGB;
>> +
>> +	pixm->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pixm->colorspace);
>> +	pixm->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pixm->colorspace);  
>
>This colorimetry information should come from the sensor subdev. That's the
>only component that knows this.
>
>> +
>> +	pixm->pixelformat = fmt->fourcc;
>> +	pixm->field = V4L2_FIELD_NONE;
>> +
>> +	/* calculate plane size and image size */
>> +	fcc_xysubs(fmt->fourcc, &xsubs, &ysubs);
>> +
>> +	planes = fmt->cplanes ? fmt->cplanes : fmt->mplanes;
>> +
>> +	for (i = 0; i < planes; i++) {
>> +		struct v4l2_plane_pix_format *plane_fmt;
>> +		int width, height, bpl, size;
>> +
>> +		if (i == 0) {
>> +			width = pixm->width;
>> +			height = pixm->height;
>> +		} else {
>> +			width = pixm->width / xsubs;
>> +			height = pixm->height / ysubs;
>> +		}
>> +
>> +		bpl = width * fmt->bpp[i] / 8;
>> +		size = bpl * height;
>> +		imagesize += size;
>> +
>> +		if (fmt->mplanes > i) {
>> +			/* Set bpl and size for each mplane */
>> +			plane_fmt = pixm->plane_fmt + i;
>> +			plane_fmt->bytesperline = bpl;
>> +			plane_fmt->sizeimage = size;
>> +		}
>> +	}
>> +
>> +	/* convert to non-MPLANE format.
>> +	 * It's important since we want to unify non-MPLANE
>> +	 * and MPLANE.
>> +	 */
>> +	if (fmt->mplanes == 1)
>> +		pixm->plane_fmt[0].sizeimage = imagesize;
>> +
>> +	if (!try) {
>> +		stream->cif_fmt_out = fmt;
>> +		stream->pixm = *pixm;
>> +	}
>> +}
>> +
>> +void rkcif_stream_init(struct rkcif_device *dev)
>> +{
>> +	struct rkcif_stream *stream = &dev->stream;
>> +	struct v4l2_pix_format_mplane pixm;
>> +
>> +	memset(stream, 0, sizeof(*stream));
>> +	memset(&pixm, 0, sizeof(pixm));
>> +	stream->cifdev = dev;
>> +
>> +	INIT_LIST_HEAD(&stream->buf_head);
>> +	spin_lock_init(&stream->vbq_lock);
>> +	stream->state = RKCIF_STATE_READY;
>> +	init_waitqueue_head(&stream->wq_stopped);
>> +
>> +	/* Set default format */
>> +	pixm.pixelformat = V4L2_PIX_FMT_NV12;
>> +	pixm.width = RKCIF_DEFAULT_WIDTH;
>> +	pixm.height = RKCIF_DEFAULT_HEIGHT;
>> +	rkcif_set_fmt(stream, &pixm, false);
>> +
>> +	stream->crop.left = 0;
>> +	stream->crop.top = 0;
>> +	stream->crop.width = 10;
>> +	stream->crop.height = 10;  
>
>I thought cropping wasn't supported yet? If that's indeed the case, then
>just drop the 'crop' struct.
>
>> +}
>> +
>> +static int rkcif_fh_open(struct file *filp)
>> +{
>> +	struct video_device *vdev = video_devdata(filp);
>> +	struct rkcif_stream *stream = to_rkcif_stream(vdev);
>> +	struct rkcif_device *cifdev = stream->cifdev;
>> +
>> +	rkcif_soft_reset(cifdev);  
>
>Dubious. What happens if you are streaming and from another shell you
>run 'v4l2-ctl -D -d /dev/videoX'? That will open the device and call
>rkcif_soft_reset(). That doesn't sound safe.
>
>> +
>> +	return v4l2_fh_open(filp);
>> +}
>> +
>> +static const struct v4l2_file_operations rkcif_fops = {
>> +	.open = rkcif_fh_open,
>> +	.release = vb2_fop_release,
>> +	.unlocked_ioctl = video_ioctl2,
>> +	.poll = vb2_fop_poll,
>> +	.mmap = vb2_fop_mmap,
>> +};
>> +
>> +static int rkcif_enum_input(struct file *file, void *priv,
>> +			    struct v4l2_input *input)
>> +{
>> +	if (input->index > 0)
>> +		return -EINVAL;
>> +
>> +	input->type = V4L2_INPUT_TYPE_CAMERA;
>> +	strlcpy(input->name, "Camera", sizeof(input->name));  
>
>Use strscpy instead of strcpy/strncpy/strlcpy. We standardized on that in the
>media subsystem.
>
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkcif_try_fmt_vid_cap_mplane(struct file *file, void *fh,
>> +					struct v4l2_format *f)
>> +{
>> +	struct rkcif_stream *stream = video_drvdata(file);
>> +
>> +	rkcif_set_fmt(stream, &f->fmt.pix_mp, true);
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkcif_enum_fmt_vid_cap(struct file *file, void *priv,
>> +					 struct v4l2_fmtdesc *f)
>> +{
>> +	const struct cif_output_fmt *fmt = NULL;
>> +
>> +	if (f->index >= ARRAY_SIZE(out_fmts))
>> +		return -EINVAL;
>> +
>> +	fmt = &out_fmts[f->index];
>> +	f->pixelformat = fmt->fourcc;
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkcif_s_fmt_vid_cap_mplane(struct file *file,
>> +				      void *priv, struct v4l2_format *f)
>> +{
>> +	struct rkcif_stream *stream = video_drvdata(file);
>> +
>> +	rkcif_set_fmt(stream, &f->fmt.pix_mp, false);
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkcif_g_fmt_vid_cap_mplane(struct file *file, void *fh,
>> +				      struct v4l2_format *f)
>> +{
>> +	struct rkcif_stream *stream = video_drvdata(file);
>> +
>> +	f->fmt.pix_mp = stream->pixm;
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkcif_querycap(struct file *file, void *priv,
>> +			  struct v4l2_capability *cap)
>> +{
>> +	struct rkcif_stream *stream = video_drvdata(file);
>> +	struct device *dev = stream->cifdev->dev;
>> +
>> +	strlcpy(cap->driver, dev->driver->name, sizeof(cap->driver));
>> +	strlcpy(cap->card, dev->driver->name, sizeof(cap->card));
>> +	snprintf(cap->bus_info, sizeof(cap->bus_info),
>> +		 "platform:%s", dev_name(dev));
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkcif_enum_framesizes(struct file *file, void *fh,
>> +				 struct v4l2_frmsizeenum *fsize)
>> +{
>> +	struct rkcif_stream *stream = video_drvdata(file);
>> +	struct rkcif_device *dev = stream->cifdev;
>> +	struct v4l2_subdev_frame_size_enum fse = {
>> +		.index = fsize->index,
>> +		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>> +	};
>> +	const struct cif_output_fmt *fmt;
>> +	int ret;
>> +
>> +	if (!dev->sensor.sd)
>> +		return -EINVAL;
>> +
>> +	fmt = find_output_fmt(stream, fsize->pixel_format);
>> +	if (!fmt)
>> +		return -EINVAL;
>> +
>> +	fse.code = fmt->mbus;
>> +
>> +	ret = v4l2_subdev_call(dev->sensor.sd, pad, enum_frame_size,
>> +			       NULL, &fse);
>> +	if (ret)
>> +		return ret;
>> +
>> +	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
>> +	fsize->discrete.width = fse.max_width;
>> +	fsize->discrete.height = fse.max_height;
>> +
>> +	return 0;
>> +}
>> +
>> +static int rkcif_g_input(struct file *file, void *fh, unsigned int *i)
>> +{
>> +	*i = 0;
>> +	return 0;
>> +}
>> +
>> +static int rkcif_s_input(struct file *file, void *fh, unsigned int i)
>> +{
>> +	if (i)
>> +		return -EINVAL;
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct v4l2_ioctl_ops rkcif_v4l2_ioctl_ops = {
>> +	.vidioc_reqbufs = vb2_ioctl_reqbufs,
>> +	.vidioc_querybuf = vb2_ioctl_querybuf,
>> +	.vidioc_create_bufs = vb2_ioctl_create_bufs,
>> +	.vidioc_qbuf = vb2_ioctl_qbuf,
>> +	.vidioc_expbuf = vb2_ioctl_expbuf,
>> +	.vidioc_dqbuf = vb2_ioctl_dqbuf,
>> +	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
>> +	.vidioc_streamon = vb2_ioctl_streamon,
>> +	.vidioc_streamoff = vb2_ioctl_streamoff,
>> +
>> +	.vidioc_enum_fmt_vid_cap = rkcif_enum_fmt_vid_cap,
>> +	.vidioc_try_fmt_vid_cap_mplane = rkcif_try_fmt_vid_cap_mplane,
>> +	.vidioc_s_fmt_vid_cap_mplane = rkcif_s_fmt_vid_cap_mplane,
>> +	.vidioc_g_fmt_vid_cap_mplane = rkcif_g_fmt_vid_cap_mplane,
>> +	.vidioc_querycap = rkcif_querycap,
>> +	.vidioc_enum_framesizes = rkcif_enum_framesizes,
>> +
>> +	.vidioc_enum_input = rkcif_enum_input,
>> +	.vidioc_g_input = rkcif_g_input,
>> +	.vidioc_s_input = rkcif_s_input,
>> +};
>> +
>> +void rkcif_unregister_stream_vdev(struct rkcif_device *dev)
>> +{
>> +	struct rkcif_stream *stream = &dev->stream;
>> +
>> +	media_entity_cleanup(&stream->vdev.entity);
>> +	video_unregister_device(&stream->vdev);
>> +}
>> +
>> +int rkcif_register_stream_vdev(struct rkcif_device *dev)
>> +{
>> +	struct rkcif_stream *stream = &dev->stream;
>> +	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
>> +	struct video_device *vdev = &stream->vdev;
>> +	int ret;
>> +
>> +	strlcpy(vdev->name, CIF_VIDEODEVICE_NAME, sizeof(vdev->name));
>> +	mutex_init(&stream->vlock);
>> +
>> +	vdev->ioctl_ops = &rkcif_v4l2_ioctl_ops;
>> +	vdev->release = video_device_release_empty;
>> +	vdev->fops = &rkcif_fops;
>> +	vdev->minor = -1;
>> +	vdev->v4l2_dev = v4l2_dev;
>> +	vdev->lock = &stream->vlock;
>> +	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
>> +			    V4L2_CAP_STREAMING;
>> +	video_set_drvdata(vdev, stream);
>> +	vdev->vfl_dir = VFL_DIR_RX;
>> +	stream->pad.flags = MEDIA_PAD_FL_SINK;
>> +
>> +	rkcif_init_vb2_queue(&stream->buf_queue, stream,
>> +			V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE |
>> +			V4L2_BUF_TYPE_VIDEO_CAPTURE);
>> +	vdev->queue = &stream->buf_queue;
>> +	strscpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name));
>> +
>> +	ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);  
>
>Hmm, you aren't basing your code on the latest media git repo
>(https://git.linuxtv.org//media_tree.git).
>
>VFL_TYPE_GRABBER was renamed to VFL_TYPE_VIDEO.
>
>> +	if (ret < 0) {
>> +		v4l2_err(v4l2_dev,
>> +			 "video_register_device failed with error %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	ret = media_entity_pads_init(&vdev->entity, 1, &stream->pad);
>> +	if (ret < 0)
>> +		goto unreg;
>> +
>> +	return 0;
>> +unreg:
>> +	video_unregister_device(vdev);
>> +	return ret;
>> +}
>> +
>> +static void rkcif_vb_done_oneframe(struct rkcif_stream *stream,
>> +				   struct vb2_v4l2_buffer *vb_done)
>> +{
>> +	const struct cif_output_fmt *fmt = stream->cif_fmt_out;
>> +	u32 i;
>> +
>> +	/* Dequeue a filled buffer */
>> +	for (i = 0; i < fmt->mplanes; i++) {
>> +		vb2_set_plane_payload(&vb_done->vb2_buf, i,
>> +			stream->pixm.plane_fmt[i].sizeimage);
>> +	}
>> +	vb_done->vb2_buf.timestamp = ktime_get_ns();
>> +	vb2_buffer_done(&vb_done->vb2_buf, VB2_BUF_STATE_DONE);
>> +}
>> +
>> +void rkcif_irq_oneframe(struct rkcif_device *cif_dev)
>> +{
>> +	struct rkcif_stream *stream = &cif_dev->stream;
>> +	u32 lastline, lastpix, ctl, cif_frmst, intstat;
>> +	void __iomem *base = cif_dev->base_addr;
>> +
>> +	intstat = read_cif_reg(base, CIF_INTSTAT);
>> +	cif_frmst = read_cif_reg(base, CIF_FRAME_STATUS);
>> +	lastline = CIF_FETCH_Y_LAST_LINE(read_cif_reg(base, CIF_LAST_LINE));
>> +	lastpix = read_cif_reg(base, CIF_LAST_PIX);
>> +	ctl = read_cif_reg(base, CIF_CTRL);
>> +
>> +	/* There are two irqs enabled:
>> +	 *  - PST_INF_FRAME_END: cif FIFO is ready, this is prior to FRAME_END
>> +	 *  -         FRAME_END: cif has saved frame to memory, a frame ready
>> +	 */
>> +
>> +	if ((intstat & PST_INF_FRAME_END)) {
>> +		write_cif_reg(base, CIF_INTSTAT, PST_INF_FRAME_END_CLR);
>> +
>> +		if (stream->stopping)
>> +			/* To stop CIF ASAP, before FRAME_END irq */
>> +			write_cif_reg(base, CIF_CTRL, ctl & (~ENABLE_CAPTURE));
>> +	}
>> +
>> +	if ((intstat & LINE_ERR)) {
>> +		write_cif_reg(base, CIF_INTSTAT, LINE_ERR_CLR);
>> +
>> +		if (stream->stopping) {
>> +			rkcif_stream_stop(stream);
>> +			stream->stopping = false;
>> +			wake_up(&stream->wq_stopped);
>> +			return;
>> +		}
>> +
>> +		v4l2_err(&cif_dev->v4l2_dev,
>> +			 "Bad frame, irq:0x%x frmst:0x%x size:%dx%d\n",
>> +			 intstat, cif_frmst, lastline, lastpix);
>> +		/* Clear status to receive into the same buffer */
>> +		write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
>> +		return;
>> +	}
>> +
>> +
>> +	if ((intstat & FRAME_END)) {
>> +		struct vb2_v4l2_buffer *vb_done = NULL;
>> +
>> +		write_cif_reg(base, CIF_INTSTAT, FRAME_END_CLR);
>> +
>> +		if (stream->stopping) {
>> +			rkcif_stream_stop(stream);
>> +			stream->stopping = false;
>> +			wake_up(&stream->wq_stopped);
>> +			return;
>> +		}
>> +
>> +		if (lastline != stream->pixm.height ||
>> +		    !(cif_frmst & CIF_F0_READY)) {
>> +			v4l2_err(&cif_dev->v4l2_dev,
>> +				 "Bad frame, irq:0x%x frmst:0x%x size:%dx%d\n",
>> +				 intstat, cif_frmst, lastline, lastpix);
>> +			/* Clear status to receive into the same buffer */
>> +			write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
>> +			return;
>> +		}
>> +
>> +		if (stream->curr_buf)
>> +			vb_done = &stream->curr_buf->vb;
>> +		rkcif_assign_new_buffer_oneframe(stream);
>> +
>> +		/* In one-frame mode, must clear status manually to enable
>> +		 * the next frame end irq
>> +		 */
>> +		write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
>> +
>> +		if (vb_done)
>> +			rkcif_vb_done_oneframe(stream, vb_done);
>> +
>> +		stream->frame_idx++;
>> +	}
>> +}
>> diff --git a/drivers/media/platform/rockchip/cif/dev.c b/drivers/media/platform/rockchip/cif/dev.c
>> new file mode 100644
>> index 000000000000..88f3833b7cdc
>> --- /dev/null
>> +++ b/drivers/media/platform/rockchip/cif/dev.c
>> @@ -0,0 +1,407 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +/*
>> + * Rockchip CIF Driver
>> + *
>> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
>> + */
>> +
>> +#include <linux/clk.h>
>> +#include <linux/delay.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_graph.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/of_reserved_mem.h>
>> +#include <linux/reset.h>
>> +#include <linux/pm_runtime.h>
>> +#include <linux/pinctrl/consumer.h>
>> +#include <media/v4l2-fwnode.h>
>> +
>> +#include "dev.h"
>> +#include "regs.h"
>> +
>> +#define RKCIF_VERNO_LEN		10
>> +
>> +struct cif_match_data {
>> +	int chip_id;
>> +	const char * const *clks;
>> +	const char * const *rsts;
>> +	int clks_num;
>> +	int rsts_num;
>> +};
>> +
>> +static int rkcif_create_links(struct rkcif_device *dev)
>> +{
>> +	struct v4l2_subdev *sd = dev->sensor.sd;
>> +	int ret;
>> +
>> +	ret = media_entity_get_fwnode_pad(&sd->entity, sd->fwnode,
>> +					  MEDIA_PAD_FL_SOURCE);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = media_create_pad_link(&sd->entity, 0,
>> +				    &dev->stream.vdev.entity, 0,
>> +				    MEDIA_LNK_FL_ENABLED);
>> +	if (ret) {
>> +		dev_err(dev->dev, "failed to create link");
>> +		return ret;
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static int subdev_notifier_complete(struct v4l2_async_notifier *notifier)
>> +{
>> +	struct rkcif_device *dev;
>> +	int ret;
>> +
>> +	dev = container_of(notifier, struct rkcif_device, notifier);
>> +
>> +	mutex_lock(&dev->media_dev.graph_mutex);
>> +
>> +	ret = rkcif_create_links(dev);
>> +	if (ret < 0)
>> +		goto unlock;
>> +
>> +	ret = v4l2_device_register_subdev_nodes(&dev->v4l2_dev);
>> +	if (ret < 0)
>> +		goto unlock;
>> +
>> +unlock:
>> +	mutex_unlock(&dev->media_dev.graph_mutex);
>> +	return ret;
>> +}
>> +
>> +static int subdev_notifier_bound(struct v4l2_async_notifier *notifier,
>> +				 struct v4l2_subdev *subdev,
>> +				 struct v4l2_async_subdev *asd)
>> +{
>> +	struct rkcif_device *cif_dev = container_of(notifier,
>> +					struct rkcif_device, notifier);
>> +
>> +	int pad;
>> +
>> +	cif_dev->sensor.sd = subdev;
>> +	pad = media_entity_get_fwnode_pad(&subdev->entity, subdev->fwnode,
>> +					  MEDIA_PAD_FL_SOURCE);
>> +	if (pad < 0)
>> +		return pad;
>> +
>> +	cif_dev->sensor.pad = pad;
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct v4l2_async_notifier_operations subdev_notifier_ops = {
>> +	.bound = subdev_notifier_bound,
>> +	.complete = subdev_notifier_complete,
>> +};
>> +
>> +static int cif_subdev_notifier(struct rkcif_device *cif_dev)
>> +{
>> +	struct v4l2_async_notifier *ntf = &cif_dev->notifier;
>> +	struct device *dev = cif_dev->dev;
>> +	struct v4l2_fwnode_endpoint vep = {
>> +		.bus_type = V4L2_MBUS_PARALLEL,
>> +	};
>> +	struct fwnode_handle *ep;
>> +	int ret;
>> +
>> +	v4l2_async_notifier_init(ntf);
>> +
>> +	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0,
>> +			FWNODE_GRAPH_ENDPOINT_NEXT);
>> +	if (!ep)
>> +		return -EINVAL;
>> +
>> +	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ret = v4l2_async_notifier_add_fwnode_remote_subdev(ntf, ep,
>> +							   &cif_dev->asd);
>> +	if (ret)
>> +		return ret;
>> +
>> +	ntf->ops = &subdev_notifier_ops;
>> +
>> +	fwnode_handle_put(ep);
>> +
>> +	ret = v4l2_async_notifier_register(&cif_dev->v4l2_dev, ntf);
>> +	return ret;
>> +}
>> +
>> +static int rkcif_register_platform_subdevs(struct rkcif_device *cif_dev)
>> +{
>> +	int ret;
>> +
>> +	ret = rkcif_register_stream_vdev(cif_dev);  
>
>You must wait with registering the video device (and media device as well
>for that matter) until all subdevs are ready. So this should be moved to
>subdev_notifier_complete.
>
>Otherwise device nodes are created that cannot be used yet because the
>subdevs aren't ready yet.
>
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	ret = cif_subdev_notifier(cif_dev);
>> +	if (ret < 0) {
>> +		v4l2_err(&cif_dev->v4l2_dev,
>> +			 "Failed to register subdev notifier(%d)\n", ret);
>> +		rkcif_unregister_stream_vdev(cif_dev);
>> +	}
>> +
>> +	return 0;
>> +}
>> +
>> +static const char * const px30_cif_clks[] = {
>> +	"aclk_cif",
>> +	"hclk_cif",
>> +	"pclk_cif",
>> +	"cif_out",
>> +};
>> +
>> +static const char * const px30_cif_rsts[] = {
>> +	"rst_cif_a",
>> +	"rst_cif_h",
>> +	"rst_cif_pclkin",
>> +};
>> +
>> +static const struct cif_match_data px30_cif_match_data = {
>> +	.chip_id = CHIP_PX30_CIF,
>> +	.clks = px30_cif_clks,
>> +	.clks_num = ARRAY_SIZE(px30_cif_clks),
>> +	.rsts = px30_cif_rsts,
>> +	.rsts_num = ARRAY_SIZE(px30_cif_rsts),
>> +};
>> +
>> +static const struct of_device_id rkcif_plat_of_match[] = {
>> +	{
>> +		.compatible = "rockchip,px30-cif",
>> +		.data = &px30_cif_match_data,
>> +	},
>> +	{},
>> +};
>> +
>> +static irqreturn_t rkcif_irq_handler(int irq, void *ctx)
>> +{
>> +	struct device *dev = ctx;
>> +	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
>> +
>> +	rkcif_irq_oneframe(cif_dev);
>> +
>> +	return IRQ_HANDLED;
>> +}
>> +
>> +static void rkcif_disable_sys_clk(struct rkcif_device *cif_dev)
>> +{
>> +	int i;
>> +
>> +	for (i = cif_dev->clk_size - 1; i >= 0; i--)
>> +		clk_disable_unprepare(cif_dev->clks[i]);
>> +}
>> +
>> +static int rkcif_enable_sys_clk(struct rkcif_device *cif_dev)
>> +{
>> +	int i, ret = -EINVAL;
>> +
>> +	for (i = 0; i < cif_dev->clk_size; i++) {
>> +		ret = clk_prepare_enable(cif_dev->clks[i]);
>> +
>> +		if (ret < 0)
>> +			goto err;
>> +	}
>> +
>> +	return 0;
>> +
>> +err:
>> +	for (--i; i >= 0; --i)
>> +		clk_disable_unprepare(cif_dev->clks[i]);
>> +
>> +	return ret;
>> +}
>> +
>> +void rkcif_soft_reset(struct rkcif_device *cif_dev)
>> +{
>> +	unsigned int i;
>> +
>> +	for (i = 0; i < ARRAY_SIZE(cif_dev->cif_rst); i++)
>> +		if (cif_dev->cif_rst[i])
>> +			reset_control_assert(cif_dev->cif_rst[i]);
>> +	udelay(5);
>> +	for (i = 0; i < ARRAY_SIZE(cif_dev->cif_rst); i++)
>> +		if (cif_dev->cif_rst[i])
>> +			reset_control_deassert(cif_dev->cif_rst[i]);
>> +}
>> +
>> +static int rkcif_plat_probe(struct platform_device *pdev)
>> +{
>> +	const struct of_device_id *match;
>> +	struct device_node *node = pdev->dev.of_node;
>> +	struct device *dev = &pdev->dev;
>> +	struct v4l2_device *v4l2_dev;
>> +	struct rkcif_device *cif_dev;
>> +	const struct cif_match_data *data;
>> +	struct resource *res;
>> +	int i, ret, irq;
>> +
>> +	match = of_match_node(rkcif_plat_of_match, node);
>> +	if (IS_ERR(match))
>> +		return PTR_ERR(match);
>> +
>> +	cif_dev = devm_kzalloc(dev, sizeof(*cif_dev), GFP_KERNEL);
>> +	if (!cif_dev)
>> +		return -ENOMEM;
>> +
>> +	dev_set_drvdata(dev, cif_dev);
>> +	cif_dev->dev = dev;
>> +
>> +	irq = platform_get_irq(pdev, 0);
>> +	if (irq < 0)
>> +		return irq;
>> +
>> +	ret = devm_request_irq(dev, irq, rkcif_irq_handler, IRQF_SHARED,
>> +			       dev_driver_string(dev), dev);
>> +	if (ret < 0) {
>> +		dev_err(dev, "request irq failed: %d\n", ret);
>> +		return ret;
>> +	}
>> +
>> +	cif_dev->irq = irq;
>> +	data = match->data;
>> +	cif_dev->chip_id = data->chip_id;
>> +
>> +	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
>> +	cif_dev->base_addr = devm_ioremap_resource(dev, res);
>> +
>> +	if (IS_ERR(cif_dev->base_addr))
>> +		return PTR_ERR(cif_dev->base_addr);
>> +
>> +	if (data->clks_num > RKCIF_MAX_BUS_CLK ||
>> +		data->rsts_num > RKCIF_MAX_RESET) {
>> +		dev_err(dev, "out of range: clks(%d %d) rsts(%d %d)\n",
>> +			data->clks_num, RKCIF_MAX_BUS_CLK,
>> +			data->rsts_num, RKCIF_MAX_RESET);
>> +		return -EINVAL;
>> +	}
>> +
>> +	for (i = 0; i < data->clks_num; i++) {
>> +		struct clk *clk = devm_clk_get(dev, data->clks[i]);
>> +
>> +		if (IS_ERR(clk)) {
>> +			dev_err(dev, "failed to get %s\n", data->clks[i]);
>> +			return PTR_ERR(clk);
>> +		}
>> +
>> +		cif_dev->clks[i] = clk;
>> +	}
>> +
>> +	cif_dev->clk_size = data->clks_num;
>> +
>> +	for (i = 0; i < data->rsts_num; i++) {
>> +		struct reset_control *rst =
>> +			devm_reset_control_get(dev, data->rsts[i]);
>> +		if (IS_ERR(rst)) {
>> +			dev_err(dev, "failed to get %s\n", data->rsts[i]);
>> +			return PTR_ERR(rst);
>> +		}
>> +		cif_dev->cif_rst[i] = rst;
>> +	}
>> +
>> +	/* Initialize the stream */
>> +	rkcif_stream_init(cif_dev);
>> +
>> +	strlcpy(cif_dev->media_dev.model, "rkcif",
>> +		sizeof(cif_dev->media_dev.model));
>> +	cif_dev->media_dev.dev = &pdev->dev;
>> +	v4l2_dev = &cif_dev->v4l2_dev;
>> +	v4l2_dev->mdev = &cif_dev->media_dev;
>> +	strlcpy(v4l2_dev->name, "rkcif", sizeof(v4l2_dev->name));
>> +	v4l2_ctrl_handler_init(&cif_dev->ctrl_handler, 8);
>> +	v4l2_dev->ctrl_handler = &cif_dev->ctrl_handler;
>> +
>> +	ret = v4l2_device_register(cif_dev->dev, &cif_dev->v4l2_dev);
>> +	if (ret < 0)
>> +		return ret;
>> +
>> +	media_device_init(&cif_dev->media_dev);
>> +
>> +	ret = media_device_register(&cif_dev->media_dev);
>> +	if (ret < 0) {
>> +		v4l2_err(v4l2_dev, "Failed to register media device: %d\n",
>> +			 ret);
>> +		goto err_unreg_v4l2_dev;
>> +	}
>> +
>> +	/* create & register platefom subdev (from of_node) */  
>
>platefom -> platform
>
>> +	ret = rkcif_register_platform_subdevs(cif_dev);
>> +	if (ret < 0)
>> +		goto err_unreg_media_dev;
>> +
>> +	ret = of_reserved_mem_device_init(dev);
>> +	if (ret)
>> +		v4l2_warn(v4l2_dev, "No reserved memory region assign to CIF\n");
>> +
>> +	pm_runtime_enable(&pdev->dev);
>> +
>> +	return 0;
>> +
>> +err_unreg_media_dev:
>> +	media_device_unregister(&cif_dev->media_dev);
>> +err_unreg_v4l2_dev:
>> +	v4l2_device_unregister(&cif_dev->v4l2_dev);
>> +	return ret;
>> +}
>> +
>> +static int rkcif_plat_remove(struct platform_device *pdev)
>> +{
>> +	struct rkcif_device *cif_dev = platform_get_drvdata(pdev);
>> +
>> +	pm_runtime_disable(&pdev->dev);
>> +
>> +	media_device_unregister(&cif_dev->media_dev);
>> +	v4l2_device_unregister(&cif_dev->v4l2_dev);
>> +	rkcif_unregister_stream_vdev(cif_dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static int __maybe_unused rkcif_runtime_suspend(struct device *dev)
>> +{
>> +	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
>> +
>> +	rkcif_disable_sys_clk(cif_dev);
>> +
>> +	return pinctrl_pm_select_sleep_state(dev);
>> +}
>> +
>> +static int __maybe_unused rkcif_runtime_resume(struct device *dev)
>> +{
>> +	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
>> +	int ret;
>> +
>> +	ret = pinctrl_pm_select_default_state(dev);
>> +	if (ret < 0)
>> +		return ret;
>> +	rkcif_enable_sys_clk(cif_dev);
>> +
>> +	return 0;
>> +}
>> +
>> +static const struct dev_pm_ops rkcif_plat_pm_ops = {
>> +	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
>> +				pm_runtime_force_resume)
>> +	SET_RUNTIME_PM_OPS(rkcif_runtime_suspend, rkcif_runtime_resume, NULL)
>> +};
>> +
>> +static struct platform_driver rkcif_plat_drv = {
>> +	.driver = {
>> +		   .name = CIF_DRIVER_NAME,
>> +		   .of_match_table = of_match_ptr(rkcif_plat_of_match),
>> +		   .pm = &rkcif_plat_pm_ops,
>> +	},
>> +	.probe = rkcif_plat_probe,
>> +	.remove = rkcif_plat_remove,
>> +};
>> +
>> +module_platform_driver(rkcif_plat_drv);
>> +MODULE_AUTHOR("Rockchip Camera/ISP team");
>> +MODULE_DESCRIPTION("Rockchip CIF platform driver");
>> +MODULE_LICENSE("GPL");
>> diff --git a/drivers/media/platform/rockchip/cif/dev.h b/drivers/media/platform/rockchip/cif/dev.h
>> new file mode 100644
>> index 000000000000..3dc47d461d04
>> --- /dev/null
>> +++ b/drivers/media/platform/rockchip/cif/dev.h
>> @@ -0,0 +1,208 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Rockchip CIF Driver
>> + *
>> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
>> + */
>> +
>> +#ifndef _RKCIF_DEV_H
>> +#define _RKCIF_DEV_H
>> +
>> +#include <linux/mutex.h>
>> +#include <media/media-device.h>
>> +#include <media/media-entity.h>
>> +#include <media/v4l2-ctrls.h>
>> +#include <media/v4l2-device.h>
>> +#include <media/videobuf2-v4l2.h>
>> +
>> +#define CIF_DRIVER_NAME		"rkcif"
>> +#define CIF_VIDEODEVICE_NAME	"stream_cif"
>> +
>> +#define RKCIF_MAX_BUS_CLK	8
>> +#define RKCIF_MAX_SENSOR	2
>> +#define RKCIF_MAX_RESET		5
>> +#define RKCIF_MAX_CSI_CHANNEL	4
>> +
>> +#define RKCIF_DEFAULT_WIDTH	640
>> +#define RKCIF_DEFAULT_HEIGHT	480
>> +
>> +#define write_cif_reg(base, addr, val)  writel(val, (addr) + (base))
>> +#define read_cif_reg(base, addr) readl((addr) + (base))
>> +
>> +#define write_csihost_reg(base, addr, val)  writel(val, (addr) + (base))
>> +#define read_csihost_reg(base, addr) readl((addr) + (base))
>> +
>> +enum rkcif_state {
>> +	RKCIF_STATE_DISABLED,
>> +	RKCIF_STATE_READY,
>> +	RKCIF_STATE_STREAMING
>> +};
>> +
>> +enum rkcif_chip_id {
>> +	CHIP_PX30_CIF,
>> +	CHIP_RK1808_CIF,
>> +	CHIP_RK3128_CIF,
>> +	CHIP_RK3288_CIF
>> +};
>> +
>> +enum host_type_t {
>> +	RK_CSI_RXHOST,
>> +	RK_DSI_RXHOST
>> +};
>> +
>> +struct rkcif_buffer {
>> +	struct vb2_v4l2_buffer vb;
>> +	struct list_head queue;
>> +	union {
>> +		u32 buff_addr[VIDEO_MAX_PLANES];
>> +		void *vaddr[VIDEO_MAX_PLANES];
>> +	};
>> +};
>> +
>> +struct rkcif_dummy_buffer {
>> +	void *vaddr;
>> +	dma_addr_t dma_addr;
>> +	u32 size;
>> +};
>> +
>> +extern int rkcif_debug;
>> +
>> +static inline struct rkcif_buffer *to_rkcif_buffer(struct vb2_v4l2_buffer *vb)
>> +{
>> +	return container_of(vb, struct rkcif_buffer, vb);
>> +}
>> +
>> +/*
>> + * struct rkcif_sensor_info - Sensor infomations
>> + * @mbus: media bus configuration
>> + */
>> +struct rkcif_sensor_info {
>> +	struct v4l2_subdev *sd;
>> +	int pad;
>> +	struct v4l2_mbus_config mbus;
>> +	int lanes;
>> +};
>> +
>> +/*
>> + * struct cif_output_fmt - The output format
>> + *
>> + * @fourcc: pixel format in fourcc
>> + * @cplanes: number of colour planes
>> + * @fmt_val: the fmt val corresponding to CIF_FOR register
>> + * @bpp: bits per pixel for each cplanes
>> + */
>> +struct cif_output_fmt {
>> +	u32 fourcc;
>> +	u32 mbus;
>> +	u8 cplanes;
>> +	u8 mplanes;
>> +	u32 fmt_val;
>> +	u8 bpp[VIDEO_MAX_PLANES];
>> +};
>> +
>> +enum cif_fmt_type {
>> +	CIF_FMT_TYPE_YUV = 0,
>> +	CIF_FMT_TYPE_RAW,
>> +};
>> +
>> +/*
>> + * struct cif_input_fmt - The input mbus format from sensor
>> + *
>> + * @mbus_code: mbus format
>> + * @dvp_fmt_val: the fmt val corresponding to CIF_FOR register
>> + * @csi_fmt_val: the fmt val corresponding to CIF_CSI_ID_CTRL
>> + * @field: the field type of the input from sensor
>> + */
>> +struct cif_input_fmt {
>> +	u32 mbus_code;
>> +	u32 dvp_fmt_val;
>> +	u32 csi_fmt_val;
>> +	enum cif_fmt_type fmt_type;
>> +	enum v4l2_field field;
>> +};
>> +
>> +/*
>> + * struct rkcif_stream - Stream states TODO
>> + *
>> + * @vbq_lock: lock to protect buf_queue
>> + * @buf_queue: queued buffer list
>> + * @dummy_buf: dummy space to store dropped data
>> + *
>> + * rkcif use shadowsock registers, so it need two buffer at a time
>> + * @curr_buf: the buffer used for current frame
>> + * @next_buf: the buffer used for next frame
>> + */
>> +struct rkcif_stream {
>> +	struct rkcif_device		*cifdev;
>> +	enum rkcif_state		state;
>> +	bool				stopping;
>> +	wait_queue_head_t		wq_stopped;
>> +	int				frame_idx;
>> +	int				frame_phase;
>> +
>> +	/* lock between irq and buf_queue */
>> +	spinlock_t			vbq_lock;
>> +	struct vb2_queue		buf_queue;
>> +	struct list_head		buf_head;
>> +	struct rkcif_dummy_buffer	dummy_buf;
>> +	struct rkcif_buffer		*curr_buf;
>> +	struct rkcif_buffer		*next_buf;
>> +
>> +	/* vfd lock */
>> +	struct mutex			vlock;
>> +	struct video_device		vdev;
>> +	/* TODO: pad for dvp and mipi separately? */
>> +	struct media_pad		pad;
>> +
>> +	const struct cif_output_fmt	*cif_fmt_out;
>> +	const struct cif_input_fmt	*cif_fmt_in;
>> +	struct v4l2_pix_format_mplane	pixm;
>> +	struct v4l2_rect		crop;
>> +	int				crop_enable;
>> +};
>> +
>> +static inline struct rkcif_stream *to_rkcif_stream(struct video_device *vdev)
>> +{
>> +	return container_of(vdev, struct rkcif_stream, vdev);
>> +}
>> +
>> +/*
>> + * struct rkcif_device - ISP platform device
>> + * @base_addr: base register address
>> + * @active_sensor: sensor in-use, set when streaming on
>> + * @stream: capture video device
>> + */
>> +struct rkcif_device {
>> +	struct list_head		list;
>> +	struct device			*dev;
>> +	int				irq;
>> +	void __iomem			*base_addr;
>> +	void __iomem			*csi_base;
>> +	struct clk			*clks[RKCIF_MAX_BUS_CLK];
>> +	int				clk_size;
>> +	struct vb2_alloc_ctx		*alloc_ctx;
>> +	bool				iommu_en;
>> +	struct iommu_domain		*domain;
>> +	struct reset_control		*cif_rst[RKCIF_MAX_RESET];
>> +
>> +	struct v4l2_device		v4l2_dev;
>> +	struct media_device		media_dev;
>> +	struct v4l2_ctrl_handler	ctrl_handler;
>> +	struct v4l2_async_notifier	notifier;
>> +	struct v4l2_async_subdev	asd;
>> +	struct rkcif_sensor_info	sensor;
>> +
>> +	struct rkcif_stream		stream;
>> +
>> +	int				chip_id;
>> +};
>> +
>> +void rkcif_unregister_stream_vdev(struct rkcif_device *dev);
>> +int rkcif_register_stream_vdev(struct rkcif_device *dev);
>> +void rkcif_stream_init(struct rkcif_device *dev);
>> +
>> +void rkcif_irq_oneframe(struct rkcif_device *cif_dev);
>> +void rkcif_irq_pingpong(struct rkcif_device *cif_dev);
>> +void rkcif_soft_reset(struct rkcif_device *cif_dev);
>> +
>> +#endif
>> diff --git a/drivers/media/platform/rockchip/cif/regs.h b/drivers/media/platform/rockchip/cif/regs.h
>> new file mode 100644
>> index 000000000000..5e0f926c70d3
>> --- /dev/null
>> +++ b/drivers/media/platform/rockchip/cif/regs.h
>> @@ -0,0 +1,256 @@
>> +/* SPDX-License-Identifier: GPL-2.0 */
>> +/*
>> + * Rockchip CIF Driver
>> + *
>> + * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
>> + */
>> +
>> +#ifndef _RKCIF_REGS_H
>> +#define _RKCIF_REGS_H
>> +
>> +/* CIF Reg Offset */
>> +#define CIF_CTRL			0x00
>> +#define CIF_INTEN			0x04
>> +#define CIF_INTSTAT			0x08
>> +#define CIF_FOR				0x0c
>> +#define CIF_LINE_NUM_ADDR		0x10
>> +#define CIF_FRM0_ADDR_Y			0x14
>> +#define CIF_FRM0_ADDR_UV		0x18
>> +#define CIF_FRM1_ADDR_Y			0x1c
>> +#define CIF_FRM1_ADDR_UV		0x20
>> +#define CIF_VIR_LINE_WIDTH		0x24
>> +#define CIF_SET_SIZE			0x28
>> +#define CIF_SCM_ADDR_Y			0x2c
>> +#define CIF_SCM_ADDR_U			0x30
>> +#define CIF_SCM_ADDR_V			0x34
>> +#define CIF_WB_UP_FILTER		0x38
>> +#define CIF_WB_LOW_FILTER		0x3c
>> +#define CIF_WBC_CNT			0x40
>> +#define CIF_CROP			0x44
>> +#define CIF_SCL_CTRL			0x48
>> +#define CIF_SCL_DST			0x4c
>> +#define CIF_SCL_FCT			0x50
>> +#define CIF_SCL_VALID_NUM		0x54
>> +#define CIF_LINE_LOOP_CTR		0x58
>> +#define CIF_FRAME_STATUS		0x60
>> +#define CIF_CUR_DST			0x64
>> +#define CIF_LAST_LINE			0x68
>> +#define CIF_LAST_PIX			0x6c
>> +
>> +/* RK1808 CIF CSI Registers Offset */
>> +#define CIF_CSI_ID0_CTRL0		0x80
>> +#define CIF_CSI_ID0_CTRL1		0x84
>> +#define CIF_CSI_ID1_CTRL0		0x88
>> +#define CIF_CSI_ID1_CTRL1		0x8c
>> +#define CIF_CSI_ID2_CTRL0		0x90
>> +#define CIF_CSI_ID2_CTRL1		0x94
>> +#define CIF_CSI_ID3_CTRL0		0x98
>> +#define CIF_CSI_ID3_CTRL1		0x9c
>> +#define CIF_CSI_WATER_LINE		0xa0
>> +#define CIF_CSI_FRM0_ADDR_Y_ID0		0xa4
>> +#define CIF_CSI_FRM1_ADDR_Y_ID0		0xa8
>> +#define CIF_CSI_FRM0_ADDR_UV_ID0	0xac
>> +#define CIF_CSI_FRM1_ADDR_UV_ID0	0xb0
>> +#define CIF_CSI_FRM0_VLW_Y_ID0		0xb4
>> +#define CIF_CSI_FRM1_VLW_Y_ID0		0xb8
>> +#define CIF_CSI_FRM0_VLW_UV_ID0		0xbc
>> +#define CIF_CSI_FRM1_VLW_UV_ID0		0xc0
>> +#define CIF_CSI_FRM0_ADDR_Y_ID1		0xc4
>> +#define CIF_CSI_FRM1_ADDR_Y_ID1		0xc8
>> +#define CIF_CSI_FRM0_ADDR_UV_ID1	0xcc
>> +#define CIF_CSI_FRM1_ADDR_UV_ID1	0xd0
>> +#define CIF_CSI_FRM0_VLW_Y_ID1		0xd4
>> +#define CIF_CSI_FRM1_VLW_Y_ID1		0xd8
>> +#define CIF_CSI_FRM0_VLW_UV_ID1		0xdc
>> +#define CIF_CSI_FRM1_VLW_UV_ID1		0xe0
>> +#define CIF_CSI_FRM0_ADDR_Y_ID2		0xe4
>> +#define CIF_CSI_FRM1_ADDR_Y_ID2		0xe8
>> +#define CIF_CSI_FRM0_ADDR_UV_ID2	0xec
>> +#define CIF_CSI_FRM1_ADDR_UV_ID2	0xf0
>> +#define CIF_CSI_FRM0_VLW_Y_ID2		0xf4
>> +#define CIF_CSI_FRM1_VLW_Y_ID2		0xf8
>> +#define CIF_CSI_FRM0_VLW_UV_ID2		0xfc
>> +#define CIF_CSI_FRM1_VLW_UV_ID2		0x100
>> +#define CIF_CSI_FRM0_ADDR_Y_ID3		0x104
>> +#define CIF_CSI_FRM1_ADDR_Y_ID3		0x108
>> +#define CIF_CSI_FRM0_ADDR_UV_ID3	0x10c
>> +#define CIF_CSI_FRM1_ADDR_UV_ID3	0x110
>> +#define CIF_CSI_FRM0_VLW_Y_ID3		0x114
>> +#define CIF_CSI_FRM1_VLW_Y_ID3		0x118
>> +#define CIF_CSI_FRM0_VLW_UV_ID3		0x11c
>> +#define CIF_CSI_FRM1_VLW_UV_ID3		0x120
>> +#define CIF_CSI_INTEN			0x124
>> +#define CIF_CSI_INTSTAT			0x128
>> +#define CIF_CSI_LINE_INT_NUM_ID0_1	0x12c
>> +#define CIF_CSI_LINE_INT_NUM_ID2_3	0x130
>> +#define CIF_CSI_LINE_CNT_ID0_1		0x134
>> +#define CIF_CSI_LINE_CNT_ID2_3		0x138
>> +#define CIF_CSI_ID0_CROP_START		0x13c
>> +#define CIF_CSI_ID1_CROP_START		0x140
>> +#define CIF_CSI_ID2_CROP_START		0x144
>> +#define CIF_CSI_ID3_CROP_START		0x148
>> +
>> +/* The key register bit description */
>> +
>> +/* CIF_CTRL Reg */
>> +#define DISABLE_CAPTURE			(0x0 << 0)
>> +#define ENABLE_CAPTURE			(0x1 << 0)
>> +#define MODE_ONEFRAME			(0x0 << 1)
>> +#define MODE_PINGPONG			(0x1 << 1)
>> +#define MODE_LINELOOP			(0x2 << 1)
>> +#define AXI_BURST_16			(0xF << 12)
>> +
>> +/* CIF_INTEN */
>> +#define INTEN_DISABLE			(0x0 << 0)
>> +#define FRAME_END_EN			(0x1 << 0)
>> +#define LINE_ERR_EN			(0x1 << 2)
>> +#define BUS_ERR_EN			(0x1 << 6)
>> +#define SCL_ERR_EN			(0x1 << 7)
>> +#define PST_INF_FRAME_END_EN		(0x1 << 9)
>> +
>> +/* CIF INTSTAT */
>> +#define INTSTAT_CLS			(0x3FF)
>> +#define FRAME_END			(0x01 << 0)
>> +#define LINE_ERR			(0x01 << 2)
>> +#define PST_INF_FRAME_END		(0x01 << 9)
>> +#define FRAME_END_CLR			(0x01 << 0)
>> +#define LINE_ERR_CLR			(0x01 << 2)
>> +#define PST_INF_FRAME_END_CLR		(0x01 << 9)
>> +#define INTSTAT_ERR			(0xFC)
>> +
>> +/* FRAME STATUS */
>> +#define FRAME_STAT_CLS			0x00
>> +#define FRM0_STAT_CLS			0x20	/* write 0 to clear frame 0 */
>> +
>> +/* CIF FORMAT */
>> +#define VSY_HIGH_ACTIVE			(0x01 << 0)
>> +#define VSY_LOW_ACTIVE			(0x00 << 0)
>> +#define HSY_LOW_ACTIVE			(0x01 << 1)
>> +#define HSY_HIGH_ACTIVE			(0x00 << 1)
>> +#define INPUT_MODE_YUV			(0x00 << 2)
>> +#define INPUT_MODE_PAL			(0x02 << 2)
>> +#define INPUT_MODE_NTSC			(0x03 << 2)
>> +#define INPUT_MODE_BT1120		(0x07 << 2)
>> +#define INPUT_MODE_RAW			(0x04 << 2)
>> +#define INPUT_MODE_JPEG			(0x05 << 2)
>> +#define INPUT_MODE_MIPI			(0x06 << 2)
>> +#define YUV_INPUT_ORDER_UYVY		(0x00 << 5)
>> +#define YUV_INPUT_ORDER_YVYU		(0x01 << 5)
>> +#define YUV_INPUT_ORDER_VYUY		(0x10 << 5)
>> +#define YUV_INPUT_ORDER_YUYV		(0x03 << 5)
>> +#define YUV_INPUT_422			(0x00 << 7)
>> +#define YUV_INPUT_420			(0x01 << 7)
>> +#define INPUT_420_ORDER_EVEN		(0x00 << 8)
>> +#define INPUT_420_ORDER_ODD		(0x01 << 8)
>> +#define CCIR_INPUT_ORDER_ODD		(0x00 << 9)
>> +#define CCIR_INPUT_ORDER_EVEN		(0x01 << 9)
>> +#define RAW_DATA_WIDTH_8		(0x00 << 11)
>> +#define RAW_DATA_WIDTH_10		(0x01 << 11)
>> +#define RAW_DATA_WIDTH_12		(0x02 << 11)
>> +#define YUV_OUTPUT_422			(0x00 << 16)
>> +#define YUV_OUTPUT_420			(0x01 << 16)
>> +#define OUTPUT_420_ORDER_EVEN		(0x00 << 17)
>> +#define OUTPUT_420_ORDER_ODD		(0x01 << 17)
>> +#define RAWD_DATA_LITTLE_ENDIAN		(0x00 << 18)
>> +#define RAWD_DATA_BIG_ENDIAN		(0x01 << 18)
>> +#define UV_STORAGE_ORDER_UVUV		(0x00 << 19)
>> +#define UV_STORAGE_ORDER_VUVU		(0x01 << 19)
>> +#define BT1120_CLOCK_SINGLE_EDGES	(0x00 << 24)
>> +#define BT1120_CLOCK_DOUBLE_EDGES	(0x01 << 24)
>> +#define BT1120_TRANSMIT_INTERFACE	(0x00 << 25)
>> +#define BT1120_TRANSMIT_PROGRESS	(0x01 << 25)
>> +#define BT1120_YC_SWAP			(0x01 << 26)
>> +
>> +/* CIF_SCL_CTRL */
>> +#define ENABLE_SCL_DOWN			(0x01 << 0)
>> +#define DISABLE_SCL_DOWN		(0x00 << 0)
>> +#define ENABLE_SCL_UP			(0x01 << 1)
>> +#define DISABLE_SCL_UP			(0x00 << 1)
>> +#define ENABLE_YUV_16BIT_BYPASS		(0x01 << 4)
>> +#define DISABLE_YUV_16BIT_BYPASS	(0x00 << 4)
>> +#define ENABLE_RAW_16BIT_BYPASS		(0x01 << 5)
>> +#define DISABLE_RAW_16BIT_BYPASS	(0x00 << 5)
>> +#define ENABLE_32BIT_BYPASS		(0x01 << 6)
>> +#define DISABLE_32BIT_BYPASS		(0x00 << 6)
>> +
>> +/* CIF_INTSTAT */
>> +#define CIF_F0_READY			(0x01 << 0)
>> +#define CIF_F1_READY			(0x01 << 1)
>> +
>> +/* CIF CROP */
>> +#define CIF_CROP_Y_SHIFT		16
>> +#define CIF_CROP_X_SHIFT		0
>> +
>> +/* CIF_CSI_ID_CTRL0 */
>> +#define CSI_DISABLE_CAPTURE		(0x0 << 0)
>> +#define CSI_ENABLE_CAPTURE		(0x1 << 0)
>> +#define CSI_WRDDR_TYPE_RAW8		(0x0 << 1)
>> +#define CSI_WRDDR_TYPE_RAW10		(0x1 << 1)
>> +#define CSI_WRDDR_TYPE_RAW12		(0x2 << 1)
>> +#define CSI_WRDDR_TYPE_RGB888		(0x3 << 1)
>> +#define CSI_WRDDR_TYPE_YUV422		(0x4 << 1)
>> +#define CSI_DISABLE_COMMAND_MODE	(0x0 << 4)
>> +#define CSI_ENABLE_COMMAND_MODE		(0x1 << 4)
>> +#define CSI_DISABLE_CROP		(0x0 << 5)
>> +#define CSI_ENABLE_CROP			(0x1 << 5)
>> +
>> +/* CIF_CSI_INTEN */
>> +#define CSI_FRAME0_START_INTEN(id)	(0x1 << ((id) * 2))
>> +#define CSI_FRAME1_START_INTEN(id)	(0x1 << ((id) * 2 + 1))
>> +#define CSI_FRAME0_END_INTEN(id)	(0x1 << ((id) * 2 + 8))
>> +#define CSI_FRAME1_END_INTEN(id)	(0x1 << ((id) * 2 + 9))
>> +#define CSI_DMA_Y_FIFO_OVERFLOW_INTEN	(0x1 << 16)
>> +#define CSI_DMA_UV_FIFO_OVERFLOW_INTEN	(0x1 << 17)
>> +#define CSI_CONFIG_FIFO_OVERFLOW_INTEN	(0x1 << 18)
>> +#define CSI_BANDWIDTH_LACK_INTEN	(0x1 << 19)
>> +#define CSI_RX_FIFO_OVERFLOW_INTEN	(0x1 << 20)
>> +#define CSI_ALL_FRAME_START_INTEN	(0xff << 0)
>> +#define CSI_ALL_FRAME_END_INTEN		(0xff << 8)
>> +#define CSI_ALL_ERROR_INTEN		(0x1f << 16)
>> +
>> +/* CIF_CSI_INTSTAT */
>> +#define CSI_FRAME0_START_ID0		(0x1 << 0)
>> +#define CSI_FRAME1_START_ID0		(0x1 << 1)
>> +#define CSI_FRAME0_START_ID1		(0x1 << 2)
>> +#define CSI_FRAME1_START_ID1		(0x1 << 3)
>> +#define CSI_FRAME0_START_ID2		(0x1 << 4)
>> +#define CSI_FRAME1_START_ID2		(0x1 << 5)
>> +#define CSI_FRAME0_START_ID3		(0x1 << 6)
>> +#define CSI_FRAME1_START_ID3		(0x1 << 7)
>> +#define CSI_FRAME0_END_ID0		(0x1 << 8)
>> +#define CSI_FRAME1_END_ID0		(0x1 << 9)
>> +#define CSI_FRAME0_END_ID1		(0x1 << 10)
>> +#define CSI_FRAME1_END_ID1		(0x1 << 11)
>> +#define CSI_FRAME0_END_ID2		(0x1 << 12)
>> +#define CSI_FRAME1_END_ID2		(0x1 << 13)
>> +#define CSI_FRAME0_END_ID3		(0x1 << 14)
>> +#define CSI_FRAME1_END_ID3		(0x1 << 15)
>> +#define CSI_DMA_Y_FIFO_OVERFLOW		(0x1 << 16)
>> +#define CSI_DMA_UV_FIFO_OVERFLOW	(0x1 << 17)
>> +#define CSI_CONFIG_FIFO_OVERFLOW	(0x1 << 18)
>> +#define CSI_BANDWIDTH_LACK		(0x1 << 19)
>> +#define CSI_RX_FIFO_OVERFLOW		(0x1 << 20)
>> +
>> +#define CSI_FIFO_OVERFLOW	(CSI_DMA_Y_FIFO_OVERFLOW |	\
>> +				 CSI_DMA_UV_FIFO_OVERFLOW |	\
>> +				 CSI_CONFIG_FIFO_OVERFLOW |	\
>> +				 CSI_RX_FIFO_OVERFLOW)
>> +
>> +/* CSI Host Registers Define */
>> +#define CSIHOST_N_LANES		0x04
>> +#define CSIHOST_PHY_RSTZ	0x0c
>> +#define CSIHOST_RESETN		0x10
>> +#define CSIHOST_ERR1		0x20
>> +#define CSIHOST_ERR2		0x24
>> +#define CSIHOST_MSK1		0x28
>> +#define CSIHOST_MSK2		0x2c
>> +#define CSIHOST_CONTROL		0x40
>> +
>> +#define SW_CPHY_EN(x)		((x) << 0)
>> +#define SW_DSI_EN(x)		((x) << 4)
>> +#define SW_DATATYPE_FS(x)	((x) << 8)
>> +#define SW_DATATYPE_FE(x)	((x) << 14)
>> +#define SW_DATATYPE_LS(x)	((x) << 20)
>> +#define SW_DATATYPE_LE(x)	((x) << 26)
>> +
>> +#endif
>>   
>
>Regards,
>
>	Hans
diff mbox series

Patch

diff --git a/drivers/media/platform/Kconfig b/drivers/media/platform/Kconfig
index f65e98d3adf2..d2f413a99886 100644
--- a/drivers/media/platform/Kconfig
+++ b/drivers/media/platform/Kconfig
@@ -460,6 +460,19 @@  config VIDEO_ROCKCHIP_RGA
 
 	  To compile this driver as a module choose m here.
 
+config VIDEO_ROCKCHIP_CIF
+	tristate "Rockchip Camera Interface"
+	depends on VIDEO_DEV && VIDEO_V4L2
+	depends on ARCH_ROCKCHIP || COMPILE_TEST
+	select VIDEOBUF2_DMA_SG
+	select VIDEOBUF2_DMA_CONTIG
+	select V4L2_FWNODE
+	select V4L2_MEM2MEM_DEV
+	help
+	  This is a v4l2 driver for Rockchip SOC Camera interface.
+
+	  To compile this driver as a module choose m here.
+
 config VIDEO_TI_VPE
 	tristate "TI VPE (Video Processing Engine) driver"
 	depends on VIDEO_DEV && VIDEO_V4L2
diff --git a/drivers/media/platform/Makefile b/drivers/media/platform/Makefile
index d13db96e3015..67e7ac034be1 100644
--- a/drivers/media/platform/Makefile
+++ b/drivers/media/platform/Makefile
@@ -68,6 +68,7 @@  obj-$(CONFIG_VIDEO_RENESAS_JPU)		+= rcar_jpu.o
 obj-$(CONFIG_VIDEO_RENESAS_VSP1)	+= vsp1/
 
 obj-$(CONFIG_VIDEO_ROCKCHIP_RGA)	+= rockchip/rga/
+obj-$(CONFIG_VIDEO_ROCKCHIP_CIF)	+= rockchip/cif/
 
 obj-y	+= omap/
 
diff --git a/drivers/media/platform/rockchip/cif/Makefile b/drivers/media/platform/rockchip/cif/Makefile
new file mode 100644
index 000000000000..727990824316
--- /dev/null
+++ b/drivers/media/platform/rockchip/cif/Makefile
@@ -0,0 +1,3 @@ 
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_VIDEO_ROCKCHIP_CIF) += video_rkcif.o
+video_rkcif-objs += dev.o capture.o
diff --git a/drivers/media/platform/rockchip/cif/capture.c b/drivers/media/platform/rockchip/cif/capture.c
new file mode 100644
index 000000000000..9df7757c6ed9
--- /dev/null
+++ b/drivers/media/platform/rockchip/cif/capture.c
@@ -0,0 +1,1170 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip CIF Driver
+ *
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
+ * Copyright (C) 2020 Maxime Chevallier <maxime.chevallier@bootlin.com>
+ */
+
+#include <linux/delay.h>
+#include <linux/pm_runtime.h>
+#include <linux/reset.h>
+#include <media/v4l2-common.h>
+#include <media/v4l2-event.h>
+#include <media/v4l2-fh.h>
+#include <media/v4l2-fwnode.h>
+#include <media/v4l2-ioctl.h>
+#include <media/v4l2-mc.h>
+#include <media/v4l2-subdev.h>
+#include <media/videobuf2-dma-contig.h>
+
+#include "dev.h"
+#include "regs.h"
+
+#define CIF_REQ_BUFS_MIN	1
+#define CIF_MIN_WIDTH		64
+#define CIF_MIN_HEIGHT		64
+#define CIF_MAX_WIDTH		8192
+#define CIF_MAX_HEIGHT		8192
+
+#define RKCIF_PLANE_Y			0
+#define RKCIF_PLANE_CBCR		1
+
+#define CIF_FETCH_Y_LAST_LINE(VAL) ((VAL) & 0x1fff)
+/* Check if swap y and c in bt1120 mode */
+#define CIF_FETCH_IS_Y_FIRST(VAL) ((VAL) & 0xf)
+
+/* Get xsubs and ysubs for fourcc formats
+ *
+ * @xsubs: horizontal color samples in a 4*4 matrix, for yuv
+ * @ysubs: vertical color samples in a 4*4 matrix, for yuv
+ */
+static int fcc_xysubs(u32 fcc, u32 *xsubs, u32 *ysubs)
+{
+	switch (fcc) {
+	case V4L2_PIX_FMT_NV16:
+	case V4L2_PIX_FMT_NV61:
+		*xsubs = 2;
+		*ysubs = 1;
+		break;
+	case V4L2_PIX_FMT_NV21:
+	case V4L2_PIX_FMT_NV12:
+		*xsubs = 2;
+		*ysubs = 2;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	return 0;
+}
+
+static const struct cif_output_fmt out_fmts[] = {
+	{
+		.fourcc = V4L2_PIX_FMT_NV16,
+		.cplanes = 2,
+		.mplanes = 1,
+		.fmt_val = YUV_OUTPUT_422 | UV_STORAGE_ORDER_UVUV,
+		.bpp = { 8, 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_NV61,
+		.fmt_val = YUV_OUTPUT_422 | UV_STORAGE_ORDER_VUVU,
+		.cplanes = 2,
+		.mplanes = 1,
+		.bpp = { 8, 16 },
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_NV12,
+		.fmt_val = YUV_OUTPUT_420 | UV_STORAGE_ORDER_UVUV,
+		.cplanes = 2,
+		.mplanes = 1,
+		.bpp = { 8, 16 },
+		.mbus = MEDIA_BUS_FMT_UYVY8_2X8,
+	},
+	{
+		.fourcc = V4L2_PIX_FMT_NV21,
+		.fmt_val = YUV_OUTPUT_420 | UV_STORAGE_ORDER_VUVU,
+		.cplanes = 2,
+		.mplanes = 1,
+		.bpp = { 8, 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_RGB24,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 24 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_RGB565,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_BGR666,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 18 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SRGGB8,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 8 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SGRBG8,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 8 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SGBRG8,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 8 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SBGGR8,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 8 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SRGGB10,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SGRBG10,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SGBRG10,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SBGGR10,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SRGGB12,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SGRBG12,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SGBRG12,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SBGGR12,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_SBGGR16,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}, {
+		.fourcc = V4L2_PIX_FMT_Y16,
+		.cplanes = 1,
+		.mplanes = 1,
+		.bpp = { 16 },
+	}
+};
+
+static const struct cif_input_fmt in_fmts[] = {
+	{
+		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
+		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YUYV,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
+		.fmt_type	= CIF_FMT_TYPE_YUV,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_YUYV8_2X8,
+		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YUYV,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
+		.fmt_type	= CIF_FMT_TYPE_YUV,
+		.field		= V4L2_FIELD_INTERLACED,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_YVYU8_2X8,
+		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YVYU,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
+		.fmt_type	= CIF_FMT_TYPE_YUV,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_YVYU8_2X8,
+		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_YVYU,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
+		.fmt_type	= CIF_FMT_TYPE_YUV,
+		.field		= V4L2_FIELD_INTERLACED,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_UYVY8_2X8,
+		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_UYVY,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
+		.fmt_type	= CIF_FMT_TYPE_YUV,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_UYVY8_2X8,
+		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_UYVY,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
+		.fmt_type	= CIF_FMT_TYPE_YUV,
+		.field		= V4L2_FIELD_INTERLACED,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_VYUY8_2X8,
+		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_VYUY,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
+		.fmt_type	= CIF_FMT_TYPE_YUV,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_VYUY8_2X8,
+		.dvp_fmt_val	= YUV_INPUT_422 | YUV_INPUT_ORDER_VYUY,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_YUV422,
+		.fmt_type	= CIF_FMT_TYPE_YUV,
+		.field		= V4L2_FIELD_INTERLACED,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SBGGR8_1X8,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SGBRG8_1X8,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SGRBG8_1X8,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SRGGB8_1X8,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SBGGR10_1X10,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SGBRG10_1X10,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SGRBG10_1X10,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SRGGB10_1X10,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SBGGR12_1X12,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SGBRG12_1X12,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SGRBG12_1X12,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_SRGGB12_1X12,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_RGB888_1X24,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RGB888,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_Y8_1X8,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_8,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW8,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_Y10_1X10,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_10,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW10,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}, {
+		.mbus_code	= MEDIA_BUS_FMT_Y12_1X12,
+		.dvp_fmt_val	= INPUT_MODE_RAW | RAW_DATA_WIDTH_12,
+		.csi_fmt_val	= CSI_WRDDR_TYPE_RAW12,
+		.fmt_type	= CIF_FMT_TYPE_RAW,
+		.field		= V4L2_FIELD_NONE,
+	}
+};
+
+static const struct
+cif_input_fmt *get_input_fmt(struct v4l2_subdev *sd)
+{
+	struct v4l2_subdev_format fmt;
+	int ret;
+	u32 i;
+
+	fmt.which = V4L2_SUBDEV_FORMAT_ACTIVE;
+	fmt.pad = 0;
+	ret = v4l2_subdev_call(sd, pad, get_fmt, NULL, &fmt);
+	if (ret < 0) {
+		v4l2_warn(sd->v4l2_dev,
+			  "sensor fmt invalid, set to default size\n");
+		goto set_default;
+	}
+
+	for (i = 0; i < ARRAY_SIZE(in_fmts); i++)
+		if (fmt.format.code == in_fmts[i].mbus_code &&
+		    fmt.format.field == in_fmts[i].field)
+			return &in_fmts[i];
+
+	v4l2_err(sd->v4l2_dev, "remote sensor mbus code not supported\n");
+
+set_default:
+	return NULL;
+}
+
+	static const struct
+cif_output_fmt *find_output_fmt(struct rkcif_stream *stream, u32 pixelfmt)
+{
+	const struct cif_output_fmt *fmt;
+	u32 i;
+
+	for (i = 0; i < ARRAY_SIZE(out_fmts); i++) {
+		fmt = &out_fmts[i];
+		if (fmt->fourcc == pixelfmt)
+			return fmt;
+	}
+
+	return NULL;
+}
+
+/***************************** stream operations ******************************/
+static void rkcif_assign_new_buffer_oneframe(struct rkcif_stream *stream)
+{
+	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
+	struct rkcif_device *dev = stream->cifdev;
+	void __iomem *base = dev->base_addr;
+
+	/* Set up an empty buffer for the next frame */
+	spin_lock(&stream->vbq_lock);
+	if (!list_empty(&stream->buf_head)) {
+		stream->curr_buf = list_first_entry(&stream->buf_head,
+					struct rkcif_buffer, queue);
+		list_del(&stream->curr_buf->queue);
+	} else {
+		stream->curr_buf = NULL;
+	}
+	spin_unlock(&stream->vbq_lock);
+
+	if (stream->curr_buf) {
+		write_cif_reg(base, CIF_FRM0_ADDR_Y,
+			      stream->curr_buf->buff_addr[RKCIF_PLANE_Y]);
+		write_cif_reg(base, CIF_FRM0_ADDR_UV,
+			      stream->curr_buf->buff_addr[RKCIF_PLANE_CBCR]);
+		write_cif_reg(base, CIF_FRM1_ADDR_Y,
+			      stream->curr_buf->buff_addr[RKCIF_PLANE_Y]);
+		write_cif_reg(base, CIF_FRM1_ADDR_UV,
+			      stream->curr_buf->buff_addr[RKCIF_PLANE_CBCR]);
+	} else {
+		write_cif_reg(base, CIF_FRM0_ADDR_Y, dummy_buf->dma_addr);
+		write_cif_reg(base, CIF_FRM0_ADDR_UV, dummy_buf->dma_addr);
+		write_cif_reg(base, CIF_FRM1_ADDR_Y, dummy_buf->dma_addr);
+		write_cif_reg(base, CIF_FRM1_ADDR_UV, dummy_buf->dma_addr);
+	}
+}
+
+static void rkcif_stream_stop(struct rkcif_stream *stream)
+{
+	struct rkcif_device *cif_dev = stream->cifdev;
+	void __iomem *base = cif_dev->base_addr;
+	u32 val;
+
+	val = read_cif_reg(base, CIF_CTRL);
+	write_cif_reg(base, CIF_CTRL, val & (~ENABLE_CAPTURE));
+	write_cif_reg(base, CIF_INTEN, 0x0);
+	write_cif_reg(base, CIF_INTSTAT, 0x3ff);
+	write_cif_reg(base, CIF_FRAME_STATUS, 0x0);
+
+	stream->state = RKCIF_STATE_READY;
+}
+
+static int rkcif_queue_setup(struct vb2_queue *queue,
+			     unsigned int *num_buffers,
+			     unsigned int *num_planes,
+			     unsigned int sizes[],
+			     struct device *alloc_devs[])
+{
+	struct rkcif_stream *stream = queue->drv_priv;
+	const struct v4l2_pix_format_mplane *pixm;
+	const struct cif_output_fmt *cif_fmt;
+	u32 i;
+
+	pixm = &stream->pixm;
+	cif_fmt = stream->cif_fmt_out;
+
+	if (*num_planes) {
+		if (*num_planes != cif_fmt->mplanes)
+			return -EINVAL;
+
+		for (i = 0; i < cif_fmt->mplanes; i++)
+			if (sizes[i] < pixm->plane_fmt[i].sizeimage)
+				return -EINVAL;
+		return 0;
+	}
+
+	*num_planes = cif_fmt->mplanes;
+
+	for (i = 0; i < cif_fmt->mplanes; i++) {
+		const struct v4l2_plane_pix_format *plane_fmt;
+
+		plane_fmt = &pixm->plane_fmt[i];
+		sizes[i] = plane_fmt->sizeimage;
+	}
+
+	return 0;
+}
+
+/*
+ * The vb2_buffer are stored in rkcif_buffer, in order to unify
+ * mplane buffer and none-mplane buffer.
+ */
+static void rkcif_buf_queue(struct vb2_buffer *vb)
+{
+	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
+	struct rkcif_buffer *cifbuf = to_rkcif_buffer(vbuf);
+	struct vb2_queue *queue = vb->vb2_queue;
+	struct rkcif_stream *stream = queue->drv_priv;
+	struct v4l2_pix_format_mplane *pixm = &stream->pixm;
+	const struct cif_output_fmt *fmt = stream->cif_fmt_out;
+	unsigned long lock_flags = 0;
+	int i;
+
+	memset(cifbuf->buff_addr, 0, sizeof(cifbuf->buff_addr));
+	/* If mplanes > 1, every c-plane has its own m-plane,
+	 * otherwise, multiple c-planes are in the same m-plane
+	 */
+	for (i = 0; i < fmt->mplanes; i++)
+		cifbuf->buff_addr[i] = vb2_dma_contig_plane_dma_addr(vb, i);
+
+	if (fmt->mplanes == 1) {
+		for (i = 0; i < fmt->cplanes - 1; i++)
+			cifbuf->buff_addr[i + 1] = cifbuf->buff_addr[i] +
+				pixm->plane_fmt[i].bytesperline * pixm->height;
+	}
+
+	spin_lock_irqsave(&stream->vbq_lock, lock_flags);
+	list_add_tail(&cifbuf->queue, &stream->buf_head);
+	spin_unlock_irqrestore(&stream->vbq_lock, lock_flags);
+}
+
+static int rkcif_create_dummy_buf(struct rkcif_stream *stream)
+{
+	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
+	struct rkcif_device *dev = stream->cifdev;
+
+	/* get a maximum plane size */
+	dummy_buf->size = max3(stream->pixm.plane_fmt[0].bytesperline *
+		stream->pixm.height,
+		stream->pixm.plane_fmt[1].sizeimage,
+		stream->pixm.plane_fmt[2].sizeimage);
+
+	dummy_buf->vaddr = dma_alloc_coherent(dev->dev, dummy_buf->size,
+					      &dummy_buf->dma_addr,
+					      GFP_KERNEL);
+	if (!dummy_buf->vaddr) {
+		v4l2_err(&dev->v4l2_dev,
+			 "Failed to allocate the memory for dummy buffer\n");
+		return -ENOMEM;
+	}
+
+	v4l2_info(&dev->v4l2_dev, "Allocate dummy buffer, size: 0x%08x\n",
+		  dummy_buf->size);
+
+	return 0;
+}
+
+static void rkcif_destroy_dummy_buf(struct rkcif_stream *stream)
+{
+	struct rkcif_dummy_buffer *dummy_buf = &stream->dummy_buf;
+	struct rkcif_device *dev = stream->cifdev;
+
+	dma_free_coherent(dev->dev, dummy_buf->size,
+			  dummy_buf->vaddr, dummy_buf->dma_addr);
+}
+
+static void rkcif_stop_streaming(struct vb2_queue *queue)
+{
+	struct rkcif_stream *stream = queue->drv_priv;
+	struct rkcif_device *dev = stream->cifdev;
+	struct rkcif_buffer *buf;
+	struct v4l2_subdev *sd;
+	int ret;
+
+	stream->stopping = true;
+	ret = wait_event_timeout(stream->wq_stopped,
+				 stream->state != RKCIF_STATE_STREAMING,
+				 msecs_to_jiffies(1000));
+	if (!ret) {
+		rkcif_stream_stop(stream);
+		stream->stopping = false;
+	}
+	pm_runtime_put(dev->dev);
+
+	/* stop the sub device*/
+	sd = dev->sensor.sd;
+	v4l2_subdev_call(sd, video, s_stream, 0);
+	v4l2_subdev_call(sd, core, s_power, 0);
+
+	/* release buffers */
+	if (stream->curr_buf) {
+		list_add_tail(&stream->curr_buf->queue, &stream->buf_head);
+		stream->curr_buf = NULL;
+	}
+	if (stream->next_buf) {
+		list_add_tail(&stream->next_buf->queue, &stream->buf_head);
+		stream->next_buf = NULL;
+	}
+
+	while (!list_empty(&stream->buf_head)) {
+		buf = list_first_entry(&stream->buf_head,
+				       struct rkcif_buffer, queue);
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_ERROR);
+	}
+
+	rkcif_destroy_dummy_buf(stream);
+}
+
+static u32 rkcif_determine_input_mode(struct rkcif_device *dev)
+{
+	struct rkcif_sensor_info *sensor_info = &dev->sensor;
+	struct rkcif_stream *stream = &dev->stream;
+	v4l2_std_id std;
+	u32 mode = INPUT_MODE_YUV;
+	int ret;
+
+	ret = v4l2_subdev_call(sensor_info->sd, video, querystd, &std);
+	if (ret == 0) {
+		/* retrieve std from sensor if exist */
+		switch (std) {
+		case V4L2_STD_NTSC:
+			mode = INPUT_MODE_NTSC;
+			break;
+		case V4L2_STD_PAL:
+			mode = INPUT_MODE_PAL;
+			break;
+		case V4L2_STD_ATSC:
+			mode = INPUT_MODE_BT1120;
+			break;
+		default:
+			v4l2_err(&dev->v4l2_dev,
+				 "std: %lld is not supported", std);
+		}
+	} else {
+		/* determine input mode by mbus_code (fmt_type) */
+		switch (stream->cif_fmt_in->fmt_type) {
+		case CIF_FMT_TYPE_YUV:
+			mode = INPUT_MODE_YUV;
+			break;
+		case CIF_FMT_TYPE_RAW:
+			mode = INPUT_MODE_RAW;
+			break;
+		}
+	}
+
+	return mode;
+}
+
+static inline u32 rkcif_scl_ctl(struct rkcif_stream *stream)
+{
+	u32 fmt_type = stream->cif_fmt_in->fmt_type;
+
+	return (fmt_type == CIF_FMT_TYPE_YUV) ?
+		ENABLE_YUV_16BIT_BYPASS : ENABLE_RAW_16BIT_BYPASS;
+}
+
+static int rkcif_stream_start(struct rkcif_stream *stream)
+{
+	u32 val, mbus_flags, href_pol, vsync_pol,
+	    xfer_mode = 0, yc_swap = 0, skip_top = 0;
+	struct rkcif_device *dev = stream->cifdev;
+	struct rkcif_sensor_info *sensor_info;
+	void __iomem *base = dev->base_addr;
+
+	sensor_info = &dev->sensor;
+	stream->frame_idx = 0;
+
+	mbus_flags = sensor_info->mbus.flags;
+	href_pol = (mbus_flags & V4L2_MBUS_HSYNC_ACTIVE_HIGH) ?
+			HSY_HIGH_ACTIVE : HSY_LOW_ACTIVE;
+	vsync_pol = (mbus_flags & V4L2_MBUS_VSYNC_ACTIVE_HIGH) ?
+			VSY_HIGH_ACTIVE : VSY_LOW_ACTIVE;
+
+	if (rkcif_determine_input_mode(dev) == INPUT_MODE_BT1120) {
+		if (stream->cif_fmt_in->field == V4L2_FIELD_NONE)
+			xfer_mode = BT1120_TRANSMIT_PROGRESS;
+		else
+			xfer_mode = BT1120_TRANSMIT_INTERFACE;
+		if (!CIF_FETCH_IS_Y_FIRST(stream->cif_fmt_in->dvp_fmt_val))
+			yc_swap = BT1120_YC_SWAP;
+	}
+
+	val = vsync_pol | href_pol | rkcif_determine_input_mode(dev) |
+	      stream->cif_fmt_out->fmt_val | stream->cif_fmt_in->dvp_fmt_val |
+	      xfer_mode | yc_swap;
+	write_cif_reg(base, CIF_FOR, val);
+	val = stream->pixm.width;
+	if (stream->cif_fmt_in->fmt_type == CIF_FMT_TYPE_RAW)
+		val = stream->pixm.width * 2;
+	write_cif_reg(base, CIF_VIR_LINE_WIDTH, val);
+	write_cif_reg(base, CIF_SET_SIZE,
+		      stream->pixm.width | (stream->pixm.height << 16));
+
+	v4l2_subdev_call(sensor_info->sd, sensor, g_skip_top_lines, &skip_top);
+
+	write_cif_reg(base, CIF_CROP, skip_top << CIF_CROP_Y_SHIFT);
+	write_cif_reg(base, CIF_FRAME_STATUS, FRAME_STAT_CLS);
+	write_cif_reg(base, CIF_INTSTAT, INTSTAT_CLS);
+	write_cif_reg(base, CIF_SCL_CTRL, rkcif_scl_ctl(stream));
+
+	rkcif_assign_new_buffer_oneframe(stream);
+
+	write_cif_reg(base, CIF_INTEN, FRAME_END_EN | LINE_ERR_EN |
+			    PST_INF_FRAME_END);
+
+	if (dev->chip_id == CHIP_RK1808_CIF &&
+	    rkcif_determine_input_mode(dev) == INPUT_MODE_BT1120)
+		write_cif_reg(base, CIF_CTRL,
+			      AXI_BURST_16 | MODE_PINGPONG | ENABLE_CAPTURE);
+	else
+		write_cif_reg(base, CIF_CTRL,
+			      AXI_BURST_16 | MODE_ONEFRAME | ENABLE_CAPTURE);
+
+	stream->state = RKCIF_STATE_STREAMING;
+
+	return 0;
+}
+
+static int rkcif_start_streaming(struct vb2_queue *queue, unsigned int count)
+{
+	struct rkcif_stream *stream = queue->drv_priv;
+	struct rkcif_device *dev = stream->cifdev;
+	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
+	struct v4l2_subdev *sd;
+	int ret;
+
+	if (WARN_ON(stream->state != RKCIF_STATE_READY)) {
+		ret = -EBUSY;
+		v4l2_err(v4l2_dev, "stream in busy state\n");
+		goto destroy_buf;
+	}
+
+	stream->cif_fmt_in = get_input_fmt(dev->sensor.sd);
+
+	ret = rkcif_create_dummy_buf(stream);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev, "Failed to create dummy_buf, %d\n", ret);
+		goto destroy_buf;
+	}
+
+	ret = pm_runtime_get_sync(dev->dev);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev, "Failed to get runtime pm, %d\n", ret);
+		goto destroy_dummy_buf;
+	}
+
+	/* start sub-devices */
+	sd = dev->sensor.sd;
+	ret = v4l2_subdev_call(sd, core, s_power, 1);
+	if (ret < 0 && ret != -ENOIOCTLCMD)
+		goto runtime_put;
+	ret = v4l2_subdev_call(sd, video, s_stream, 1);
+	if (ret < 0)
+		goto subdev_poweroff;
+
+	ret = rkcif_stream_start(stream);
+	if (ret < 0)
+		goto stop_stream;
+
+	return 0;
+
+stop_stream:
+	rkcif_stream_stop(stream);
+subdev_poweroff:
+	v4l2_subdev_call(sd, core, s_power, 0);
+runtime_put:
+	pm_runtime_put(dev->dev);
+destroy_dummy_buf:
+	rkcif_destroy_dummy_buf(stream);
+destroy_buf:
+	while (!list_empty(&stream->buf_head)) {
+		struct rkcif_buffer *buf;
+
+		buf = list_first_entry(&stream->buf_head,
+				       struct rkcif_buffer, queue);
+		list_del(&buf->queue);
+		vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_QUEUED);
+	}
+
+	return ret;
+}
+
+static struct vb2_ops rkcif_vb2_ops = {
+	.queue_setup = rkcif_queue_setup,
+	.buf_queue = rkcif_buf_queue,
+	.wait_prepare = vb2_ops_wait_prepare,
+	.wait_finish = vb2_ops_wait_finish,
+	.stop_streaming = rkcif_stop_streaming,
+	.start_streaming = rkcif_start_streaming,
+};
+
+static int rkcif_init_vb2_queue(struct vb2_queue *q,
+				struct rkcif_stream *stream,
+				enum v4l2_buf_type buf_type)
+{
+	q->type = buf_type;
+	q->io_modes = VB2_MMAP | VB2_DMABUF;
+	q->drv_priv = stream;
+	q->ops = &rkcif_vb2_ops;
+	q->mem_ops = &vb2_dma_contig_memops;
+	q->buf_struct_size = sizeof(struct rkcif_buffer);
+	q->min_buffers_needed = CIF_REQ_BUFS_MIN;
+	q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
+	q->lock = &stream->vlock;
+	q->dev = stream->cifdev->dev;
+
+	return vb2_queue_init(q);
+}
+
+static void rkcif_set_fmt(struct rkcif_stream *stream,
+			  struct v4l2_pix_format_mplane *pixm,
+			  bool try)
+{
+	const struct cif_output_fmt *fmt;
+	struct v4l2_rect input_rect;
+	unsigned int imagesize = 0, planes;
+	u32 xsubs = 1, ysubs = 1, i;
+
+	fmt = find_output_fmt(stream, pixm->pixelformat);
+	if (!fmt)
+		fmt = &out_fmts[0];
+
+	input_rect.width = CIF_MAX_WIDTH;
+	input_rect.height = CIF_MAX_HEIGHT;
+
+	pixm->width = clamp_t(u32, pixm->width,
+				CIF_MIN_WIDTH, input_rect.width);
+	pixm->height = clamp_t(u32, pixm->height,
+				CIF_MIN_HEIGHT, input_rect.height);
+
+	pixm->num_planes = fmt->mplanes;
+	pixm->quantization = V4L2_QUANTIZATION_DEFAULT;
+	pixm->colorspace = V4L2_COLORSPACE_SRGB;
+
+	pixm->xfer_func = V4L2_MAP_XFER_FUNC_DEFAULT(pixm->colorspace);
+	pixm->ycbcr_enc = V4L2_MAP_YCBCR_ENC_DEFAULT(pixm->colorspace);
+
+	pixm->pixelformat = fmt->fourcc;
+	pixm->field = V4L2_FIELD_NONE;
+
+	/* calculate plane size and image size */
+	fcc_xysubs(fmt->fourcc, &xsubs, &ysubs);
+
+	planes = fmt->cplanes ? fmt->cplanes : fmt->mplanes;
+
+	for (i = 0; i < planes; i++) {
+		struct v4l2_plane_pix_format *plane_fmt;
+		int width, height, bpl, size;
+
+		if (i == 0) {
+			width = pixm->width;
+			height = pixm->height;
+		} else {
+			width = pixm->width / xsubs;
+			height = pixm->height / ysubs;
+		}
+
+		bpl = width * fmt->bpp[i] / 8;
+		size = bpl * height;
+		imagesize += size;
+
+		if (fmt->mplanes > i) {
+			/* Set bpl and size for each mplane */
+			plane_fmt = pixm->plane_fmt + i;
+			plane_fmt->bytesperline = bpl;
+			plane_fmt->sizeimage = size;
+		}
+	}
+
+	/* convert to non-MPLANE format.
+	 * It's important since we want to unify non-MPLANE
+	 * and MPLANE.
+	 */
+	if (fmt->mplanes == 1)
+		pixm->plane_fmt[0].sizeimage = imagesize;
+
+	if (!try) {
+		stream->cif_fmt_out = fmt;
+		stream->pixm = *pixm;
+	}
+}
+
+void rkcif_stream_init(struct rkcif_device *dev)
+{
+	struct rkcif_stream *stream = &dev->stream;
+	struct v4l2_pix_format_mplane pixm;
+
+	memset(stream, 0, sizeof(*stream));
+	memset(&pixm, 0, sizeof(pixm));
+	stream->cifdev = dev;
+
+	INIT_LIST_HEAD(&stream->buf_head);
+	spin_lock_init(&stream->vbq_lock);
+	stream->state = RKCIF_STATE_READY;
+	init_waitqueue_head(&stream->wq_stopped);
+
+	/* Set default format */
+	pixm.pixelformat = V4L2_PIX_FMT_NV12;
+	pixm.width = RKCIF_DEFAULT_WIDTH;
+	pixm.height = RKCIF_DEFAULT_HEIGHT;
+	rkcif_set_fmt(stream, &pixm, false);
+
+	stream->crop.left = 0;
+	stream->crop.top = 0;
+	stream->crop.width = 10;
+	stream->crop.height = 10;
+}
+
+static int rkcif_fh_open(struct file *filp)
+{
+	struct video_device *vdev = video_devdata(filp);
+	struct rkcif_stream *stream = to_rkcif_stream(vdev);
+	struct rkcif_device *cifdev = stream->cifdev;
+
+	rkcif_soft_reset(cifdev);
+
+	return v4l2_fh_open(filp);
+}
+
+static const struct v4l2_file_operations rkcif_fops = {
+	.open = rkcif_fh_open,
+	.release = vb2_fop_release,
+	.unlocked_ioctl = video_ioctl2,
+	.poll = vb2_fop_poll,
+	.mmap = vb2_fop_mmap,
+};
+
+static int rkcif_enum_input(struct file *file, void *priv,
+			    struct v4l2_input *input)
+{
+	if (input->index > 0)
+		return -EINVAL;
+
+	input->type = V4L2_INPUT_TYPE_CAMERA;
+	strlcpy(input->name, "Camera", sizeof(input->name));
+
+	return 0;
+}
+
+static int rkcif_try_fmt_vid_cap_mplane(struct file *file, void *fh,
+					struct v4l2_format *f)
+{
+	struct rkcif_stream *stream = video_drvdata(file);
+
+	rkcif_set_fmt(stream, &f->fmt.pix_mp, true);
+
+	return 0;
+}
+
+static int rkcif_enum_fmt_vid_cap(struct file *file, void *priv,
+					 struct v4l2_fmtdesc *f)
+{
+	const struct cif_output_fmt *fmt = NULL;
+
+	if (f->index >= ARRAY_SIZE(out_fmts))
+		return -EINVAL;
+
+	fmt = &out_fmts[f->index];
+	f->pixelformat = fmt->fourcc;
+
+	return 0;
+}
+
+static int rkcif_s_fmt_vid_cap_mplane(struct file *file,
+				      void *priv, struct v4l2_format *f)
+{
+	struct rkcif_stream *stream = video_drvdata(file);
+
+	rkcif_set_fmt(stream, &f->fmt.pix_mp, false);
+
+	return 0;
+}
+
+static int rkcif_g_fmt_vid_cap_mplane(struct file *file, void *fh,
+				      struct v4l2_format *f)
+{
+	struct rkcif_stream *stream = video_drvdata(file);
+
+	f->fmt.pix_mp = stream->pixm;
+
+	return 0;
+}
+
+static int rkcif_querycap(struct file *file, void *priv,
+			  struct v4l2_capability *cap)
+{
+	struct rkcif_stream *stream = video_drvdata(file);
+	struct device *dev = stream->cifdev->dev;
+
+	strlcpy(cap->driver, dev->driver->name, sizeof(cap->driver));
+	strlcpy(cap->card, dev->driver->name, sizeof(cap->card));
+	snprintf(cap->bus_info, sizeof(cap->bus_info),
+		 "platform:%s", dev_name(dev));
+
+	return 0;
+}
+
+static int rkcif_enum_framesizes(struct file *file, void *fh,
+				 struct v4l2_frmsizeenum *fsize)
+{
+	struct rkcif_stream *stream = video_drvdata(file);
+	struct rkcif_device *dev = stream->cifdev;
+	struct v4l2_subdev_frame_size_enum fse = {
+		.index = fsize->index,
+		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
+	};
+	const struct cif_output_fmt *fmt;
+	int ret;
+
+	if (!dev->sensor.sd)
+		return -EINVAL;
+
+	fmt = find_output_fmt(stream, fsize->pixel_format);
+	if (!fmt)
+		return -EINVAL;
+
+	fse.code = fmt->mbus;
+
+	ret = v4l2_subdev_call(dev->sensor.sd, pad, enum_frame_size,
+			       NULL, &fse);
+	if (ret)
+		return ret;
+
+	fsize->type = V4L2_FRMSIZE_TYPE_DISCRETE;
+	fsize->discrete.width = fse.max_width;
+	fsize->discrete.height = fse.max_height;
+
+	return 0;
+}
+
+static int rkcif_g_input(struct file *file, void *fh, unsigned int *i)
+{
+	*i = 0;
+	return 0;
+}
+
+static int rkcif_s_input(struct file *file, void *fh, unsigned int i)
+{
+	if (i)
+		return -EINVAL;
+
+	return 0;
+}
+
+static const struct v4l2_ioctl_ops rkcif_v4l2_ioctl_ops = {
+	.vidioc_reqbufs = vb2_ioctl_reqbufs,
+	.vidioc_querybuf = vb2_ioctl_querybuf,
+	.vidioc_create_bufs = vb2_ioctl_create_bufs,
+	.vidioc_qbuf = vb2_ioctl_qbuf,
+	.vidioc_expbuf = vb2_ioctl_expbuf,
+	.vidioc_dqbuf = vb2_ioctl_dqbuf,
+	.vidioc_prepare_buf = vb2_ioctl_prepare_buf,
+	.vidioc_streamon = vb2_ioctl_streamon,
+	.vidioc_streamoff = vb2_ioctl_streamoff,
+
+	.vidioc_enum_fmt_vid_cap = rkcif_enum_fmt_vid_cap,
+	.vidioc_try_fmt_vid_cap_mplane = rkcif_try_fmt_vid_cap_mplane,
+	.vidioc_s_fmt_vid_cap_mplane = rkcif_s_fmt_vid_cap_mplane,
+	.vidioc_g_fmt_vid_cap_mplane = rkcif_g_fmt_vid_cap_mplane,
+	.vidioc_querycap = rkcif_querycap,
+	.vidioc_enum_framesizes = rkcif_enum_framesizes,
+
+	.vidioc_enum_input = rkcif_enum_input,
+	.vidioc_g_input = rkcif_g_input,
+	.vidioc_s_input = rkcif_s_input,
+};
+
+void rkcif_unregister_stream_vdev(struct rkcif_device *dev)
+{
+	struct rkcif_stream *stream = &dev->stream;
+
+	media_entity_cleanup(&stream->vdev.entity);
+	video_unregister_device(&stream->vdev);
+}
+
+int rkcif_register_stream_vdev(struct rkcif_device *dev)
+{
+	struct rkcif_stream *stream = &dev->stream;
+	struct v4l2_device *v4l2_dev = &dev->v4l2_dev;
+	struct video_device *vdev = &stream->vdev;
+	int ret;
+
+	strlcpy(vdev->name, CIF_VIDEODEVICE_NAME, sizeof(vdev->name));
+	mutex_init(&stream->vlock);
+
+	vdev->ioctl_ops = &rkcif_v4l2_ioctl_ops;
+	vdev->release = video_device_release_empty;
+	vdev->fops = &rkcif_fops;
+	vdev->minor = -1;
+	vdev->v4l2_dev = v4l2_dev;
+	vdev->lock = &stream->vlock;
+	vdev->device_caps = V4L2_CAP_VIDEO_CAPTURE_MPLANE |
+			    V4L2_CAP_STREAMING;
+	video_set_drvdata(vdev, stream);
+	vdev->vfl_dir = VFL_DIR_RX;
+	stream->pad.flags = MEDIA_PAD_FL_SINK;
+
+	rkcif_init_vb2_queue(&stream->buf_queue, stream,
+			V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE |
+			V4L2_BUF_TYPE_VIDEO_CAPTURE);
+	vdev->queue = &stream->buf_queue;
+	strscpy(vdev->name, KBUILD_MODNAME, sizeof(vdev->name));
+
+	ret = video_register_device(vdev, VFL_TYPE_GRABBER, -1);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev,
+			 "video_register_device failed with error %d\n", ret);
+		return ret;
+	}
+
+	ret = media_entity_pads_init(&vdev->entity, 1, &stream->pad);
+	if (ret < 0)
+		goto unreg;
+
+	return 0;
+unreg:
+	video_unregister_device(vdev);
+	return ret;
+}
+
+static void rkcif_vb_done_oneframe(struct rkcif_stream *stream,
+				   struct vb2_v4l2_buffer *vb_done)
+{
+	const struct cif_output_fmt *fmt = stream->cif_fmt_out;
+	u32 i;
+
+	/* Dequeue a filled buffer */
+	for (i = 0; i < fmt->mplanes; i++) {
+		vb2_set_plane_payload(&vb_done->vb2_buf, i,
+			stream->pixm.plane_fmt[i].sizeimage);
+	}
+	vb_done->vb2_buf.timestamp = ktime_get_ns();
+	vb2_buffer_done(&vb_done->vb2_buf, VB2_BUF_STATE_DONE);
+}
+
+void rkcif_irq_oneframe(struct rkcif_device *cif_dev)
+{
+	struct rkcif_stream *stream = &cif_dev->stream;
+	u32 lastline, lastpix, ctl, cif_frmst, intstat;
+	void __iomem *base = cif_dev->base_addr;
+
+	intstat = read_cif_reg(base, CIF_INTSTAT);
+	cif_frmst = read_cif_reg(base, CIF_FRAME_STATUS);
+	lastline = CIF_FETCH_Y_LAST_LINE(read_cif_reg(base, CIF_LAST_LINE));
+	lastpix = read_cif_reg(base, CIF_LAST_PIX);
+	ctl = read_cif_reg(base, CIF_CTRL);
+
+	/* There are two irqs enabled:
+	 *  - PST_INF_FRAME_END: cif FIFO is ready, this is prior to FRAME_END
+	 *  -         FRAME_END: cif has saved frame to memory, a frame ready
+	 */
+
+	if ((intstat & PST_INF_FRAME_END)) {
+		write_cif_reg(base, CIF_INTSTAT, PST_INF_FRAME_END_CLR);
+
+		if (stream->stopping)
+			/* To stop CIF ASAP, before FRAME_END irq */
+			write_cif_reg(base, CIF_CTRL, ctl & (~ENABLE_CAPTURE));
+	}
+
+	if ((intstat & LINE_ERR)) {
+		write_cif_reg(base, CIF_INTSTAT, LINE_ERR_CLR);
+
+		if (stream->stopping) {
+			rkcif_stream_stop(stream);
+			stream->stopping = false;
+			wake_up(&stream->wq_stopped);
+			return;
+		}
+
+		v4l2_err(&cif_dev->v4l2_dev,
+			 "Bad frame, irq:0x%x frmst:0x%x size:%dx%d\n",
+			 intstat, cif_frmst, lastline, lastpix);
+		/* Clear status to receive into the same buffer */
+		write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
+		return;
+	}
+
+
+	if ((intstat & FRAME_END)) {
+		struct vb2_v4l2_buffer *vb_done = NULL;
+
+		write_cif_reg(base, CIF_INTSTAT, FRAME_END_CLR);
+
+		if (stream->stopping) {
+			rkcif_stream_stop(stream);
+			stream->stopping = false;
+			wake_up(&stream->wq_stopped);
+			return;
+		}
+
+		if (lastline != stream->pixm.height ||
+		    !(cif_frmst & CIF_F0_READY)) {
+			v4l2_err(&cif_dev->v4l2_dev,
+				 "Bad frame, irq:0x%x frmst:0x%x size:%dx%d\n",
+				 intstat, cif_frmst, lastline, lastpix);
+			/* Clear status to receive into the same buffer */
+			write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
+			return;
+		}
+
+		if (stream->curr_buf)
+			vb_done = &stream->curr_buf->vb;
+		rkcif_assign_new_buffer_oneframe(stream);
+
+		/* In one-frame mode, must clear status manually to enable
+		 * the next frame end irq
+		 */
+		write_cif_reg(base, CIF_FRAME_STATUS, FRM0_STAT_CLS);
+
+		if (vb_done)
+			rkcif_vb_done_oneframe(stream, vb_done);
+
+		stream->frame_idx++;
+	}
+}
diff --git a/drivers/media/platform/rockchip/cif/dev.c b/drivers/media/platform/rockchip/cif/dev.c
new file mode 100644
index 000000000000..88f3833b7cdc
--- /dev/null
+++ b/drivers/media/platform/rockchip/cif/dev.c
@@ -0,0 +1,407 @@ 
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip CIF Driver
+ *
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
+ */
+
+#include <linux/clk.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_graph.h>
+#include <linux/of_platform.h>
+#include <linux/of_reserved_mem.h>
+#include <linux/reset.h>
+#include <linux/pm_runtime.h>
+#include <linux/pinctrl/consumer.h>
+#include <media/v4l2-fwnode.h>
+
+#include "dev.h"
+#include "regs.h"
+
+#define RKCIF_VERNO_LEN		10
+
+struct cif_match_data {
+	int chip_id;
+	const char * const *clks;
+	const char * const *rsts;
+	int clks_num;
+	int rsts_num;
+};
+
+static int rkcif_create_links(struct rkcif_device *dev)
+{
+	struct v4l2_subdev *sd = dev->sensor.sd;
+	int ret;
+
+	ret = media_entity_get_fwnode_pad(&sd->entity, sd->fwnode,
+					  MEDIA_PAD_FL_SOURCE);
+	if (ret)
+		return ret;
+
+	ret = media_create_pad_link(&sd->entity, 0,
+				    &dev->stream.vdev.entity, 0,
+				    MEDIA_LNK_FL_ENABLED);
+	if (ret) {
+		dev_err(dev->dev, "failed to create link");
+		return ret;
+	}
+
+	return 0;
+}
+
+static int subdev_notifier_complete(struct v4l2_async_notifier *notifier)
+{
+	struct rkcif_device *dev;
+	int ret;
+
+	dev = container_of(notifier, struct rkcif_device, notifier);
+
+	mutex_lock(&dev->media_dev.graph_mutex);
+
+	ret = rkcif_create_links(dev);
+	if (ret < 0)
+		goto unlock;
+
+	ret = v4l2_device_register_subdev_nodes(&dev->v4l2_dev);
+	if (ret < 0)
+		goto unlock;
+
+unlock:
+	mutex_unlock(&dev->media_dev.graph_mutex);
+	return ret;
+}
+
+static int subdev_notifier_bound(struct v4l2_async_notifier *notifier,
+				 struct v4l2_subdev *subdev,
+				 struct v4l2_async_subdev *asd)
+{
+	struct rkcif_device *cif_dev = container_of(notifier,
+					struct rkcif_device, notifier);
+
+	int pad;
+
+	cif_dev->sensor.sd = subdev;
+	pad = media_entity_get_fwnode_pad(&subdev->entity, subdev->fwnode,
+					  MEDIA_PAD_FL_SOURCE);
+	if (pad < 0)
+		return pad;
+
+	cif_dev->sensor.pad = pad;
+
+	return 0;
+}
+
+static const struct v4l2_async_notifier_operations subdev_notifier_ops = {
+	.bound = subdev_notifier_bound,
+	.complete = subdev_notifier_complete,
+};
+
+static int cif_subdev_notifier(struct rkcif_device *cif_dev)
+{
+	struct v4l2_async_notifier *ntf = &cif_dev->notifier;
+	struct device *dev = cif_dev->dev;
+	struct v4l2_fwnode_endpoint vep = {
+		.bus_type = V4L2_MBUS_PARALLEL,
+	};
+	struct fwnode_handle *ep;
+	int ret;
+
+	v4l2_async_notifier_init(ntf);
+
+	ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 0, 0,
+			FWNODE_GRAPH_ENDPOINT_NEXT);
+	if (!ep)
+		return -EINVAL;
+
+	ret = v4l2_fwnode_endpoint_parse(ep, &vep);
+	if (ret)
+		return ret;
+
+	ret = v4l2_async_notifier_add_fwnode_remote_subdev(ntf, ep,
+							   &cif_dev->asd);
+	if (ret)
+		return ret;
+
+	ntf->ops = &subdev_notifier_ops;
+
+	fwnode_handle_put(ep);
+
+	ret = v4l2_async_notifier_register(&cif_dev->v4l2_dev, ntf);
+	return ret;
+}
+
+static int rkcif_register_platform_subdevs(struct rkcif_device *cif_dev)
+{
+	int ret;
+
+	ret = rkcif_register_stream_vdev(cif_dev);
+	if (ret < 0)
+		return ret;
+
+	ret = cif_subdev_notifier(cif_dev);
+	if (ret < 0) {
+		v4l2_err(&cif_dev->v4l2_dev,
+			 "Failed to register subdev notifier(%d)\n", ret);
+		rkcif_unregister_stream_vdev(cif_dev);
+	}
+
+	return 0;
+}
+
+static const char * const px30_cif_clks[] = {
+	"aclk_cif",
+	"hclk_cif",
+	"pclk_cif",
+	"cif_out",
+};
+
+static const char * const px30_cif_rsts[] = {
+	"rst_cif_a",
+	"rst_cif_h",
+	"rst_cif_pclkin",
+};
+
+static const struct cif_match_data px30_cif_match_data = {
+	.chip_id = CHIP_PX30_CIF,
+	.clks = px30_cif_clks,
+	.clks_num = ARRAY_SIZE(px30_cif_clks),
+	.rsts = px30_cif_rsts,
+	.rsts_num = ARRAY_SIZE(px30_cif_rsts),
+};
+
+static const struct of_device_id rkcif_plat_of_match[] = {
+	{
+		.compatible = "rockchip,px30-cif",
+		.data = &px30_cif_match_data,
+	},
+	{},
+};
+
+static irqreturn_t rkcif_irq_handler(int irq, void *ctx)
+{
+	struct device *dev = ctx;
+	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
+
+	rkcif_irq_oneframe(cif_dev);
+
+	return IRQ_HANDLED;
+}
+
+static void rkcif_disable_sys_clk(struct rkcif_device *cif_dev)
+{
+	int i;
+
+	for (i = cif_dev->clk_size - 1; i >= 0; i--)
+		clk_disable_unprepare(cif_dev->clks[i]);
+}
+
+static int rkcif_enable_sys_clk(struct rkcif_device *cif_dev)
+{
+	int i, ret = -EINVAL;
+
+	for (i = 0; i < cif_dev->clk_size; i++) {
+		ret = clk_prepare_enable(cif_dev->clks[i]);
+
+		if (ret < 0)
+			goto err;
+	}
+
+	return 0;
+
+err:
+	for (--i; i >= 0; --i)
+		clk_disable_unprepare(cif_dev->clks[i]);
+
+	return ret;
+}
+
+void rkcif_soft_reset(struct rkcif_device *cif_dev)
+{
+	unsigned int i;
+
+	for (i = 0; i < ARRAY_SIZE(cif_dev->cif_rst); i++)
+		if (cif_dev->cif_rst[i])
+			reset_control_assert(cif_dev->cif_rst[i]);
+	udelay(5);
+	for (i = 0; i < ARRAY_SIZE(cif_dev->cif_rst); i++)
+		if (cif_dev->cif_rst[i])
+			reset_control_deassert(cif_dev->cif_rst[i]);
+}
+
+static int rkcif_plat_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device_node *node = pdev->dev.of_node;
+	struct device *dev = &pdev->dev;
+	struct v4l2_device *v4l2_dev;
+	struct rkcif_device *cif_dev;
+	const struct cif_match_data *data;
+	struct resource *res;
+	int i, ret, irq;
+
+	match = of_match_node(rkcif_plat_of_match, node);
+	if (IS_ERR(match))
+		return PTR_ERR(match);
+
+	cif_dev = devm_kzalloc(dev, sizeof(*cif_dev), GFP_KERNEL);
+	if (!cif_dev)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, cif_dev);
+	cif_dev->dev = dev;
+
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
+
+	ret = devm_request_irq(dev, irq, rkcif_irq_handler, IRQF_SHARED,
+			       dev_driver_string(dev), dev);
+	if (ret < 0) {
+		dev_err(dev, "request irq failed: %d\n", ret);
+		return ret;
+	}
+
+	cif_dev->irq = irq;
+	data = match->data;
+	cif_dev->chip_id = data->chip_id;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	cif_dev->base_addr = devm_ioremap_resource(dev, res);
+
+	if (IS_ERR(cif_dev->base_addr))
+		return PTR_ERR(cif_dev->base_addr);
+
+	if (data->clks_num > RKCIF_MAX_BUS_CLK ||
+		data->rsts_num > RKCIF_MAX_RESET) {
+		dev_err(dev, "out of range: clks(%d %d) rsts(%d %d)\n",
+			data->clks_num, RKCIF_MAX_BUS_CLK,
+			data->rsts_num, RKCIF_MAX_RESET);
+		return -EINVAL;
+	}
+
+	for (i = 0; i < data->clks_num; i++) {
+		struct clk *clk = devm_clk_get(dev, data->clks[i]);
+
+		if (IS_ERR(clk)) {
+			dev_err(dev, "failed to get %s\n", data->clks[i]);
+			return PTR_ERR(clk);
+		}
+
+		cif_dev->clks[i] = clk;
+	}
+
+	cif_dev->clk_size = data->clks_num;
+
+	for (i = 0; i < data->rsts_num; i++) {
+		struct reset_control *rst =
+			devm_reset_control_get(dev, data->rsts[i]);
+		if (IS_ERR(rst)) {
+			dev_err(dev, "failed to get %s\n", data->rsts[i]);
+			return PTR_ERR(rst);
+		}
+		cif_dev->cif_rst[i] = rst;
+	}
+
+	/* Initialize the stream */
+	rkcif_stream_init(cif_dev);
+
+	strlcpy(cif_dev->media_dev.model, "rkcif",
+		sizeof(cif_dev->media_dev.model));
+	cif_dev->media_dev.dev = &pdev->dev;
+	v4l2_dev = &cif_dev->v4l2_dev;
+	v4l2_dev->mdev = &cif_dev->media_dev;
+	strlcpy(v4l2_dev->name, "rkcif", sizeof(v4l2_dev->name));
+	v4l2_ctrl_handler_init(&cif_dev->ctrl_handler, 8);
+	v4l2_dev->ctrl_handler = &cif_dev->ctrl_handler;
+
+	ret = v4l2_device_register(cif_dev->dev, &cif_dev->v4l2_dev);
+	if (ret < 0)
+		return ret;
+
+	media_device_init(&cif_dev->media_dev);
+
+	ret = media_device_register(&cif_dev->media_dev);
+	if (ret < 0) {
+		v4l2_err(v4l2_dev, "Failed to register media device: %d\n",
+			 ret);
+		goto err_unreg_v4l2_dev;
+	}
+
+	/* create & register platefom subdev (from of_node) */
+	ret = rkcif_register_platform_subdevs(cif_dev);
+	if (ret < 0)
+		goto err_unreg_media_dev;
+
+	ret = of_reserved_mem_device_init(dev);
+	if (ret)
+		v4l2_warn(v4l2_dev, "No reserved memory region assign to CIF\n");
+
+	pm_runtime_enable(&pdev->dev);
+
+	return 0;
+
+err_unreg_media_dev:
+	media_device_unregister(&cif_dev->media_dev);
+err_unreg_v4l2_dev:
+	v4l2_device_unregister(&cif_dev->v4l2_dev);
+	return ret;
+}
+
+static int rkcif_plat_remove(struct platform_device *pdev)
+{
+	struct rkcif_device *cif_dev = platform_get_drvdata(pdev);
+
+	pm_runtime_disable(&pdev->dev);
+
+	media_device_unregister(&cif_dev->media_dev);
+	v4l2_device_unregister(&cif_dev->v4l2_dev);
+	rkcif_unregister_stream_vdev(cif_dev);
+
+	return 0;
+}
+
+static int __maybe_unused rkcif_runtime_suspend(struct device *dev)
+{
+	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
+
+	rkcif_disable_sys_clk(cif_dev);
+
+	return pinctrl_pm_select_sleep_state(dev);
+}
+
+static int __maybe_unused rkcif_runtime_resume(struct device *dev)
+{
+	struct rkcif_device *cif_dev = dev_get_drvdata(dev);
+	int ret;
+
+	ret = pinctrl_pm_select_default_state(dev);
+	if (ret < 0)
+		return ret;
+	rkcif_enable_sys_clk(cif_dev);
+
+	return 0;
+}
+
+static const struct dev_pm_ops rkcif_plat_pm_ops = {
+	SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
+				pm_runtime_force_resume)
+	SET_RUNTIME_PM_OPS(rkcif_runtime_suspend, rkcif_runtime_resume, NULL)
+};
+
+static struct platform_driver rkcif_plat_drv = {
+	.driver = {
+		   .name = CIF_DRIVER_NAME,
+		   .of_match_table = of_match_ptr(rkcif_plat_of_match),
+		   .pm = &rkcif_plat_pm_ops,
+	},
+	.probe = rkcif_plat_probe,
+	.remove = rkcif_plat_remove,
+};
+
+module_platform_driver(rkcif_plat_drv);
+MODULE_AUTHOR("Rockchip Camera/ISP team");
+MODULE_DESCRIPTION("Rockchip CIF platform driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/media/platform/rockchip/cif/dev.h b/drivers/media/platform/rockchip/cif/dev.h
new file mode 100644
index 000000000000..3dc47d461d04
--- /dev/null
+++ b/drivers/media/platform/rockchip/cif/dev.h
@@ -0,0 +1,208 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Rockchip CIF Driver
+ *
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
+ */
+
+#ifndef _RKCIF_DEV_H
+#define _RKCIF_DEV_H
+
+#include <linux/mutex.h>
+#include <media/media-device.h>
+#include <media/media-entity.h>
+#include <media/v4l2-ctrls.h>
+#include <media/v4l2-device.h>
+#include <media/videobuf2-v4l2.h>
+
+#define CIF_DRIVER_NAME		"rkcif"
+#define CIF_VIDEODEVICE_NAME	"stream_cif"
+
+#define RKCIF_MAX_BUS_CLK	8
+#define RKCIF_MAX_SENSOR	2
+#define RKCIF_MAX_RESET		5
+#define RKCIF_MAX_CSI_CHANNEL	4
+
+#define RKCIF_DEFAULT_WIDTH	640
+#define RKCIF_DEFAULT_HEIGHT	480
+
+#define write_cif_reg(base, addr, val)  writel(val, (addr) + (base))
+#define read_cif_reg(base, addr) readl((addr) + (base))
+
+#define write_csihost_reg(base, addr, val)  writel(val, (addr) + (base))
+#define read_csihost_reg(base, addr) readl((addr) + (base))
+
+enum rkcif_state {
+	RKCIF_STATE_DISABLED,
+	RKCIF_STATE_READY,
+	RKCIF_STATE_STREAMING
+};
+
+enum rkcif_chip_id {
+	CHIP_PX30_CIF,
+	CHIP_RK1808_CIF,
+	CHIP_RK3128_CIF,
+	CHIP_RK3288_CIF
+};
+
+enum host_type_t {
+	RK_CSI_RXHOST,
+	RK_DSI_RXHOST
+};
+
+struct rkcif_buffer {
+	struct vb2_v4l2_buffer vb;
+	struct list_head queue;
+	union {
+		u32 buff_addr[VIDEO_MAX_PLANES];
+		void *vaddr[VIDEO_MAX_PLANES];
+	};
+};
+
+struct rkcif_dummy_buffer {
+	void *vaddr;
+	dma_addr_t dma_addr;
+	u32 size;
+};
+
+extern int rkcif_debug;
+
+static inline struct rkcif_buffer *to_rkcif_buffer(struct vb2_v4l2_buffer *vb)
+{
+	return container_of(vb, struct rkcif_buffer, vb);
+}
+
+/*
+ * struct rkcif_sensor_info - Sensor infomations
+ * @mbus: media bus configuration
+ */
+struct rkcif_sensor_info {
+	struct v4l2_subdev *sd;
+	int pad;
+	struct v4l2_mbus_config mbus;
+	int lanes;
+};
+
+/*
+ * struct cif_output_fmt - The output format
+ *
+ * @fourcc: pixel format in fourcc
+ * @cplanes: number of colour planes
+ * @fmt_val: the fmt val corresponding to CIF_FOR register
+ * @bpp: bits per pixel for each cplanes
+ */
+struct cif_output_fmt {
+	u32 fourcc;
+	u32 mbus;
+	u8 cplanes;
+	u8 mplanes;
+	u32 fmt_val;
+	u8 bpp[VIDEO_MAX_PLANES];
+};
+
+enum cif_fmt_type {
+	CIF_FMT_TYPE_YUV = 0,
+	CIF_FMT_TYPE_RAW,
+};
+
+/*
+ * struct cif_input_fmt - The input mbus format from sensor
+ *
+ * @mbus_code: mbus format
+ * @dvp_fmt_val: the fmt val corresponding to CIF_FOR register
+ * @csi_fmt_val: the fmt val corresponding to CIF_CSI_ID_CTRL
+ * @field: the field type of the input from sensor
+ */
+struct cif_input_fmt {
+	u32 mbus_code;
+	u32 dvp_fmt_val;
+	u32 csi_fmt_val;
+	enum cif_fmt_type fmt_type;
+	enum v4l2_field field;
+};
+
+/*
+ * struct rkcif_stream - Stream states TODO
+ *
+ * @vbq_lock: lock to protect buf_queue
+ * @buf_queue: queued buffer list
+ * @dummy_buf: dummy space to store dropped data
+ *
+ * rkcif use shadowsock registers, so it need two buffer at a time
+ * @curr_buf: the buffer used for current frame
+ * @next_buf: the buffer used for next frame
+ */
+struct rkcif_stream {
+	struct rkcif_device		*cifdev;
+	enum rkcif_state		state;
+	bool				stopping;
+	wait_queue_head_t		wq_stopped;
+	int				frame_idx;
+	int				frame_phase;
+
+	/* lock between irq and buf_queue */
+	spinlock_t			vbq_lock;
+	struct vb2_queue		buf_queue;
+	struct list_head		buf_head;
+	struct rkcif_dummy_buffer	dummy_buf;
+	struct rkcif_buffer		*curr_buf;
+	struct rkcif_buffer		*next_buf;
+
+	/* vfd lock */
+	struct mutex			vlock;
+	struct video_device		vdev;
+	/* TODO: pad for dvp and mipi separately? */
+	struct media_pad		pad;
+
+	const struct cif_output_fmt	*cif_fmt_out;
+	const struct cif_input_fmt	*cif_fmt_in;
+	struct v4l2_pix_format_mplane	pixm;
+	struct v4l2_rect		crop;
+	int				crop_enable;
+};
+
+static inline struct rkcif_stream *to_rkcif_stream(struct video_device *vdev)
+{
+	return container_of(vdev, struct rkcif_stream, vdev);
+}
+
+/*
+ * struct rkcif_device - ISP platform device
+ * @base_addr: base register address
+ * @active_sensor: sensor in-use, set when streaming on
+ * @stream: capture video device
+ */
+struct rkcif_device {
+	struct list_head		list;
+	struct device			*dev;
+	int				irq;
+	void __iomem			*base_addr;
+	void __iomem			*csi_base;
+	struct clk			*clks[RKCIF_MAX_BUS_CLK];
+	int				clk_size;
+	struct vb2_alloc_ctx		*alloc_ctx;
+	bool				iommu_en;
+	struct iommu_domain		*domain;
+	struct reset_control		*cif_rst[RKCIF_MAX_RESET];
+
+	struct v4l2_device		v4l2_dev;
+	struct media_device		media_dev;
+	struct v4l2_ctrl_handler	ctrl_handler;
+	struct v4l2_async_notifier	notifier;
+	struct v4l2_async_subdev	asd;
+	struct rkcif_sensor_info	sensor;
+
+	struct rkcif_stream		stream;
+
+	int				chip_id;
+};
+
+void rkcif_unregister_stream_vdev(struct rkcif_device *dev);
+int rkcif_register_stream_vdev(struct rkcif_device *dev);
+void rkcif_stream_init(struct rkcif_device *dev);
+
+void rkcif_irq_oneframe(struct rkcif_device *cif_dev);
+void rkcif_irq_pingpong(struct rkcif_device *cif_dev);
+void rkcif_soft_reset(struct rkcif_device *cif_dev);
+
+#endif
diff --git a/drivers/media/platform/rockchip/cif/regs.h b/drivers/media/platform/rockchip/cif/regs.h
new file mode 100644
index 000000000000..5e0f926c70d3
--- /dev/null
+++ b/drivers/media/platform/rockchip/cif/regs.h
@@ -0,0 +1,256 @@ 
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Rockchip CIF Driver
+ *
+ * Copyright (C) 2018 Rockchip Electronics Co., Ltd.
+ */
+
+#ifndef _RKCIF_REGS_H
+#define _RKCIF_REGS_H
+
+/* CIF Reg Offset */
+#define CIF_CTRL			0x00
+#define CIF_INTEN			0x04
+#define CIF_INTSTAT			0x08
+#define CIF_FOR				0x0c
+#define CIF_LINE_NUM_ADDR		0x10
+#define CIF_FRM0_ADDR_Y			0x14
+#define CIF_FRM0_ADDR_UV		0x18
+#define CIF_FRM1_ADDR_Y			0x1c
+#define CIF_FRM1_ADDR_UV		0x20
+#define CIF_VIR_LINE_WIDTH		0x24
+#define CIF_SET_SIZE			0x28
+#define CIF_SCM_ADDR_Y			0x2c
+#define CIF_SCM_ADDR_U			0x30
+#define CIF_SCM_ADDR_V			0x34
+#define CIF_WB_UP_FILTER		0x38
+#define CIF_WB_LOW_FILTER		0x3c
+#define CIF_WBC_CNT			0x40
+#define CIF_CROP			0x44
+#define CIF_SCL_CTRL			0x48
+#define CIF_SCL_DST			0x4c
+#define CIF_SCL_FCT			0x50
+#define CIF_SCL_VALID_NUM		0x54
+#define CIF_LINE_LOOP_CTR		0x58
+#define CIF_FRAME_STATUS		0x60
+#define CIF_CUR_DST			0x64
+#define CIF_LAST_LINE			0x68
+#define CIF_LAST_PIX			0x6c
+
+/* RK1808 CIF CSI Registers Offset */
+#define CIF_CSI_ID0_CTRL0		0x80
+#define CIF_CSI_ID0_CTRL1		0x84
+#define CIF_CSI_ID1_CTRL0		0x88
+#define CIF_CSI_ID1_CTRL1		0x8c
+#define CIF_CSI_ID2_CTRL0		0x90
+#define CIF_CSI_ID2_CTRL1		0x94
+#define CIF_CSI_ID3_CTRL0		0x98
+#define CIF_CSI_ID3_CTRL1		0x9c
+#define CIF_CSI_WATER_LINE		0xa0
+#define CIF_CSI_FRM0_ADDR_Y_ID0		0xa4
+#define CIF_CSI_FRM1_ADDR_Y_ID0		0xa8
+#define CIF_CSI_FRM0_ADDR_UV_ID0	0xac
+#define CIF_CSI_FRM1_ADDR_UV_ID0	0xb0
+#define CIF_CSI_FRM0_VLW_Y_ID0		0xb4
+#define CIF_CSI_FRM1_VLW_Y_ID0		0xb8
+#define CIF_CSI_FRM0_VLW_UV_ID0		0xbc
+#define CIF_CSI_FRM1_VLW_UV_ID0		0xc0
+#define CIF_CSI_FRM0_ADDR_Y_ID1		0xc4
+#define CIF_CSI_FRM1_ADDR_Y_ID1		0xc8
+#define CIF_CSI_FRM0_ADDR_UV_ID1	0xcc
+#define CIF_CSI_FRM1_ADDR_UV_ID1	0xd0
+#define CIF_CSI_FRM0_VLW_Y_ID1		0xd4
+#define CIF_CSI_FRM1_VLW_Y_ID1		0xd8
+#define CIF_CSI_FRM0_VLW_UV_ID1		0xdc
+#define CIF_CSI_FRM1_VLW_UV_ID1		0xe0
+#define CIF_CSI_FRM0_ADDR_Y_ID2		0xe4
+#define CIF_CSI_FRM1_ADDR_Y_ID2		0xe8
+#define CIF_CSI_FRM0_ADDR_UV_ID2	0xec
+#define CIF_CSI_FRM1_ADDR_UV_ID2	0xf0
+#define CIF_CSI_FRM0_VLW_Y_ID2		0xf4
+#define CIF_CSI_FRM1_VLW_Y_ID2		0xf8
+#define CIF_CSI_FRM0_VLW_UV_ID2		0xfc
+#define CIF_CSI_FRM1_VLW_UV_ID2		0x100
+#define CIF_CSI_FRM0_ADDR_Y_ID3		0x104
+#define CIF_CSI_FRM1_ADDR_Y_ID3		0x108
+#define CIF_CSI_FRM0_ADDR_UV_ID3	0x10c
+#define CIF_CSI_FRM1_ADDR_UV_ID3	0x110
+#define CIF_CSI_FRM0_VLW_Y_ID3		0x114
+#define CIF_CSI_FRM1_VLW_Y_ID3		0x118
+#define CIF_CSI_FRM0_VLW_UV_ID3		0x11c
+#define CIF_CSI_FRM1_VLW_UV_ID3		0x120
+#define CIF_CSI_INTEN			0x124
+#define CIF_CSI_INTSTAT			0x128
+#define CIF_CSI_LINE_INT_NUM_ID0_1	0x12c
+#define CIF_CSI_LINE_INT_NUM_ID2_3	0x130
+#define CIF_CSI_LINE_CNT_ID0_1		0x134
+#define CIF_CSI_LINE_CNT_ID2_3		0x138
+#define CIF_CSI_ID0_CROP_START		0x13c
+#define CIF_CSI_ID1_CROP_START		0x140
+#define CIF_CSI_ID2_CROP_START		0x144
+#define CIF_CSI_ID3_CROP_START		0x148
+
+/* The key register bit description */
+
+/* CIF_CTRL Reg */
+#define DISABLE_CAPTURE			(0x0 << 0)
+#define ENABLE_CAPTURE			(0x1 << 0)
+#define MODE_ONEFRAME			(0x0 << 1)
+#define MODE_PINGPONG			(0x1 << 1)
+#define MODE_LINELOOP			(0x2 << 1)
+#define AXI_BURST_16			(0xF << 12)
+
+/* CIF_INTEN */
+#define INTEN_DISABLE			(0x0 << 0)
+#define FRAME_END_EN			(0x1 << 0)
+#define LINE_ERR_EN			(0x1 << 2)
+#define BUS_ERR_EN			(0x1 << 6)
+#define SCL_ERR_EN			(0x1 << 7)
+#define PST_INF_FRAME_END_EN		(0x1 << 9)
+
+/* CIF INTSTAT */
+#define INTSTAT_CLS			(0x3FF)
+#define FRAME_END			(0x01 << 0)
+#define LINE_ERR			(0x01 << 2)
+#define PST_INF_FRAME_END		(0x01 << 9)
+#define FRAME_END_CLR			(0x01 << 0)
+#define LINE_ERR_CLR			(0x01 << 2)
+#define PST_INF_FRAME_END_CLR		(0x01 << 9)
+#define INTSTAT_ERR			(0xFC)
+
+/* FRAME STATUS */
+#define FRAME_STAT_CLS			0x00
+#define FRM0_STAT_CLS			0x20	/* write 0 to clear frame 0 */
+
+/* CIF FORMAT */
+#define VSY_HIGH_ACTIVE			(0x01 << 0)
+#define VSY_LOW_ACTIVE			(0x00 << 0)
+#define HSY_LOW_ACTIVE			(0x01 << 1)
+#define HSY_HIGH_ACTIVE			(0x00 << 1)
+#define INPUT_MODE_YUV			(0x00 << 2)
+#define INPUT_MODE_PAL			(0x02 << 2)
+#define INPUT_MODE_NTSC			(0x03 << 2)
+#define INPUT_MODE_BT1120		(0x07 << 2)
+#define INPUT_MODE_RAW			(0x04 << 2)
+#define INPUT_MODE_JPEG			(0x05 << 2)
+#define INPUT_MODE_MIPI			(0x06 << 2)
+#define YUV_INPUT_ORDER_UYVY		(0x00 << 5)
+#define YUV_INPUT_ORDER_YVYU		(0x01 << 5)
+#define YUV_INPUT_ORDER_VYUY		(0x10 << 5)
+#define YUV_INPUT_ORDER_YUYV		(0x03 << 5)
+#define YUV_INPUT_422			(0x00 << 7)
+#define YUV_INPUT_420			(0x01 << 7)
+#define INPUT_420_ORDER_EVEN		(0x00 << 8)
+#define INPUT_420_ORDER_ODD		(0x01 << 8)
+#define CCIR_INPUT_ORDER_ODD		(0x00 << 9)
+#define CCIR_INPUT_ORDER_EVEN		(0x01 << 9)
+#define RAW_DATA_WIDTH_8		(0x00 << 11)
+#define RAW_DATA_WIDTH_10		(0x01 << 11)
+#define RAW_DATA_WIDTH_12		(0x02 << 11)
+#define YUV_OUTPUT_422			(0x00 << 16)
+#define YUV_OUTPUT_420			(0x01 << 16)
+#define OUTPUT_420_ORDER_EVEN		(0x00 << 17)
+#define OUTPUT_420_ORDER_ODD		(0x01 << 17)
+#define RAWD_DATA_LITTLE_ENDIAN		(0x00 << 18)
+#define RAWD_DATA_BIG_ENDIAN		(0x01 << 18)
+#define UV_STORAGE_ORDER_UVUV		(0x00 << 19)
+#define UV_STORAGE_ORDER_VUVU		(0x01 << 19)
+#define BT1120_CLOCK_SINGLE_EDGES	(0x00 << 24)
+#define BT1120_CLOCK_DOUBLE_EDGES	(0x01 << 24)
+#define BT1120_TRANSMIT_INTERFACE	(0x00 << 25)
+#define BT1120_TRANSMIT_PROGRESS	(0x01 << 25)
+#define BT1120_YC_SWAP			(0x01 << 26)
+
+/* CIF_SCL_CTRL */
+#define ENABLE_SCL_DOWN			(0x01 << 0)
+#define DISABLE_SCL_DOWN		(0x00 << 0)
+#define ENABLE_SCL_UP			(0x01 << 1)
+#define DISABLE_SCL_UP			(0x00 << 1)
+#define ENABLE_YUV_16BIT_BYPASS		(0x01 << 4)
+#define DISABLE_YUV_16BIT_BYPASS	(0x00 << 4)
+#define ENABLE_RAW_16BIT_BYPASS		(0x01 << 5)
+#define DISABLE_RAW_16BIT_BYPASS	(0x00 << 5)
+#define ENABLE_32BIT_BYPASS		(0x01 << 6)
+#define DISABLE_32BIT_BYPASS		(0x00 << 6)
+
+/* CIF_INTSTAT */
+#define CIF_F0_READY			(0x01 << 0)
+#define CIF_F1_READY			(0x01 << 1)
+
+/* CIF CROP */
+#define CIF_CROP_Y_SHIFT		16
+#define CIF_CROP_X_SHIFT		0
+
+/* CIF_CSI_ID_CTRL0 */
+#define CSI_DISABLE_CAPTURE		(0x0 << 0)
+#define CSI_ENABLE_CAPTURE		(0x1 << 0)
+#define CSI_WRDDR_TYPE_RAW8		(0x0 << 1)
+#define CSI_WRDDR_TYPE_RAW10		(0x1 << 1)
+#define CSI_WRDDR_TYPE_RAW12		(0x2 << 1)
+#define CSI_WRDDR_TYPE_RGB888		(0x3 << 1)
+#define CSI_WRDDR_TYPE_YUV422		(0x4 << 1)
+#define CSI_DISABLE_COMMAND_MODE	(0x0 << 4)
+#define CSI_ENABLE_COMMAND_MODE		(0x1 << 4)
+#define CSI_DISABLE_CROP		(0x0 << 5)
+#define CSI_ENABLE_CROP			(0x1 << 5)
+
+/* CIF_CSI_INTEN */
+#define CSI_FRAME0_START_INTEN(id)	(0x1 << ((id) * 2))
+#define CSI_FRAME1_START_INTEN(id)	(0x1 << ((id) * 2 + 1))
+#define CSI_FRAME0_END_INTEN(id)	(0x1 << ((id) * 2 + 8))
+#define CSI_FRAME1_END_INTEN(id)	(0x1 << ((id) * 2 + 9))
+#define CSI_DMA_Y_FIFO_OVERFLOW_INTEN	(0x1 << 16)
+#define CSI_DMA_UV_FIFO_OVERFLOW_INTEN	(0x1 << 17)
+#define CSI_CONFIG_FIFO_OVERFLOW_INTEN	(0x1 << 18)
+#define CSI_BANDWIDTH_LACK_INTEN	(0x1 << 19)
+#define CSI_RX_FIFO_OVERFLOW_INTEN	(0x1 << 20)
+#define CSI_ALL_FRAME_START_INTEN	(0xff << 0)
+#define CSI_ALL_FRAME_END_INTEN		(0xff << 8)
+#define CSI_ALL_ERROR_INTEN		(0x1f << 16)
+
+/* CIF_CSI_INTSTAT */
+#define CSI_FRAME0_START_ID0		(0x1 << 0)
+#define CSI_FRAME1_START_ID0		(0x1 << 1)
+#define CSI_FRAME0_START_ID1		(0x1 << 2)
+#define CSI_FRAME1_START_ID1		(0x1 << 3)
+#define CSI_FRAME0_START_ID2		(0x1 << 4)
+#define CSI_FRAME1_START_ID2		(0x1 << 5)
+#define CSI_FRAME0_START_ID3		(0x1 << 6)
+#define CSI_FRAME1_START_ID3		(0x1 << 7)
+#define CSI_FRAME0_END_ID0		(0x1 << 8)
+#define CSI_FRAME1_END_ID0		(0x1 << 9)
+#define CSI_FRAME0_END_ID1		(0x1 << 10)
+#define CSI_FRAME1_END_ID1		(0x1 << 11)
+#define CSI_FRAME0_END_ID2		(0x1 << 12)
+#define CSI_FRAME1_END_ID2		(0x1 << 13)
+#define CSI_FRAME0_END_ID3		(0x1 << 14)
+#define CSI_FRAME1_END_ID3		(0x1 << 15)
+#define CSI_DMA_Y_FIFO_OVERFLOW		(0x1 << 16)
+#define CSI_DMA_UV_FIFO_OVERFLOW	(0x1 << 17)
+#define CSI_CONFIG_FIFO_OVERFLOW	(0x1 << 18)
+#define CSI_BANDWIDTH_LACK		(0x1 << 19)
+#define CSI_RX_FIFO_OVERFLOW		(0x1 << 20)
+
+#define CSI_FIFO_OVERFLOW	(CSI_DMA_Y_FIFO_OVERFLOW |	\
+				 CSI_DMA_UV_FIFO_OVERFLOW |	\
+				 CSI_CONFIG_FIFO_OVERFLOW |	\
+				 CSI_RX_FIFO_OVERFLOW)
+
+/* CSI Host Registers Define */
+#define CSIHOST_N_LANES		0x04
+#define CSIHOST_PHY_RSTZ	0x0c
+#define CSIHOST_RESETN		0x10
+#define CSIHOST_ERR1		0x20
+#define CSIHOST_ERR2		0x24
+#define CSIHOST_MSK1		0x28
+#define CSIHOST_MSK2		0x2c
+#define CSIHOST_CONTROL		0x40
+
+#define SW_CPHY_EN(x)		((x) << 0)
+#define SW_DSI_EN(x)		((x) << 4)
+#define SW_DATATYPE_FS(x)	((x) << 8)
+#define SW_DATATYPE_FE(x)	((x) << 14)
+#define SW_DATATYPE_LS(x)	((x) << 20)
+#define SW_DATATYPE_LE(x)	((x) << 26)
+
+#endif