| Message ID | 20200428100019.19155-2-jagan@amarulasolutions.com (mailing list archive) |
|---|---|
| State | New, archived |
| Headers | show |
| Series | rk3399: Sync linux v5.7-rc1 dts(i) | expand |
On 2020/4/28 下午6:00, Jagan Teki wrote: > Move U-Boot specific properties into rk3399-puma u-boot > specific dtsi file. > > This would help to sync the devicetrees from Linux whenever > required instead of adding specific nodes. > > Cc: Peter Robinson <pbrobinson@gmail.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > Changes for v2: > - none > > arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ > arch/arm/dts/rk3399-puma.dtsi | 11 ----------- > 2 files changed, 16 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi > index 52f62b5d39..e664779227 100644 > --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi > +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi > @@ -22,3 +22,19 @@ > }; > > }; > + > +&bios_enable { > + u-boot,dm-pre-reloc; > +}; > + > +&gpio1 { > + u-boot,dm-pre-reloc; > +}; > + > +&gpio3 { > + u-boot,dm-pre-reloc; > +}; > + > +&spiflash { > + u-boot,dm-pre-reloc; > +}; > diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi > index 558b6337df..246a892cb7 100644 > --- a/arch/arm/dts/rk3399-puma.dtsi > +++ b/arch/arm/dts/rk3399-puma.dtsi > @@ -91,7 +91,6 @@ > */ > bios_enable: bios_enable { > compatible = "regulator-fixed"; > - u-boot,dm-pre-reloc; > regulator-name = "bios_enable"; > enable-active-high; > gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; > @@ -520,14 +519,6 @@ > status = "okay"; > }; > > -&gpio1 { > - u-boot,dm-pre-reloc; > -}; > - > -&gpio3 { > - u-boot,dm-pre-reloc; > -}; > - > &pinctrl { > /* Pins that are not explicitely used by any devices */ > pinctrl-names = "default"; > @@ -633,8 +624,6 @@ > #size-cells = <0>; > > spiflash: w25q32dw@0 { > - u-boot,dm-pre-reloc; > - > compatible = "jedec,spi-nor"; > reg = <0>; > spi-max-frequency = <49500000>;
On 2020/4/28 下午6:00, Jagan Teki wrote: > Move U-Boot specific properties into rk3399-puma u-boot > specific dtsi file. > > This would help to sync the devicetrees from Linux whenever > required instead of adding specific nodes. > > Cc: Peter Robinson <pbrobinson@gmail.com> > Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> Thanks, - Kever > --- > Changes for v2: > - none > > arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ > arch/arm/dts/rk3399-puma.dtsi | 11 ----------- > 2 files changed, 16 insertions(+), 11 deletions(-) > > diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi > index 52f62b5d39..e664779227 100644 > --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi > +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi > @@ -22,3 +22,19 @@ > }; > > }; > + > +&bios_enable { > + u-boot,dm-pre-reloc; > +}; > + > +&gpio1 { > + u-boot,dm-pre-reloc; > +}; > + > +&gpio3 { > + u-boot,dm-pre-reloc; > +}; > + > +&spiflash { > + u-boot,dm-pre-reloc; > +}; > diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi > index 558b6337df..246a892cb7 100644 > --- a/arch/arm/dts/rk3399-puma.dtsi > +++ b/arch/arm/dts/rk3399-puma.dtsi > @@ -91,7 +91,6 @@ > */ > bios_enable: bios_enable { > compatible = "regulator-fixed"; > - u-boot,dm-pre-reloc; > regulator-name = "bios_enable"; > enable-active-high; > gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; > @@ -520,14 +519,6 @@ > status = "okay"; > }; > > -&gpio1 { > - u-boot,dm-pre-reloc; > -}; > - > -&gpio3 { > - u-boot,dm-pre-reloc; > -}; > - > &pinctrl { > /* Pins that are not explicitely used by any devices */ > pinctrl-names = "default"; > @@ -633,8 +624,6 @@ > #size-cells = <0>; > > spiflash: w25q32dw@0 { > - u-boot,dm-pre-reloc; > - > compatible = "jedec,spi-nor"; > reg = <0>; > spi-max-frequency = <49500000>;
diff --git a/arch/arm/dts/rk3399-puma-u-boot.dtsi b/arch/arm/dts/rk3399-puma-u-boot.dtsi index 52f62b5d39..e664779227 100644 --- a/arch/arm/dts/rk3399-puma-u-boot.dtsi +++ b/arch/arm/dts/rk3399-puma-u-boot.dtsi @@ -22,3 +22,19 @@ }; }; + +&bios_enable { + u-boot,dm-pre-reloc; +}; + +&gpio1 { + u-boot,dm-pre-reloc; +}; + +&gpio3 { + u-boot,dm-pre-reloc; +}; + +&spiflash { + u-boot,dm-pre-reloc; +}; diff --git a/arch/arm/dts/rk3399-puma.dtsi b/arch/arm/dts/rk3399-puma.dtsi index 558b6337df..246a892cb7 100644 --- a/arch/arm/dts/rk3399-puma.dtsi +++ b/arch/arm/dts/rk3399-puma.dtsi @@ -91,7 +91,6 @@ */ bios_enable: bios_enable { compatible = "regulator-fixed"; - u-boot,dm-pre-reloc; regulator-name = "bios_enable"; enable-active-high; gpio = <&gpio3 RK_PD5 GPIO_ACTIVE_LOW>; @@ -520,14 +519,6 @@ status = "okay"; }; -&gpio1 { - u-boot,dm-pre-reloc; -}; - -&gpio3 { - u-boot,dm-pre-reloc; -}; - &pinctrl { /* Pins that are not explicitely used by any devices */ pinctrl-names = "default"; @@ -633,8 +624,6 @@ #size-cells = <0>; spiflash: w25q32dw@0 { - u-boot,dm-pre-reloc; - compatible = "jedec,spi-nor"; reg = <0>; spi-max-frequency = <49500000>;
Move U-Boot specific properties into rk3399-puma u-boot specific dtsi file. This would help to sync the devicetrees from Linux whenever required instead of adding specific nodes. Cc: Peter Robinson <pbrobinson@gmail.com> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> --- Changes for v2: - none arch/arm/dts/rk3399-puma-u-boot.dtsi | 16 ++++++++++++++++ arch/arm/dts/rk3399-puma.dtsi | 11 ----------- 2 files changed, 16 insertions(+), 11 deletions(-)