diff mbox series

[v4,1/2] dt-bindings: rockchip: Add DesignWare based PCIe controller

Message ID 20210127022406.820975-1-xxm@rock-chips.com (mailing list archive)
State New
Headers show
Series [v4,1/2] dt-bindings: rockchip: Add DesignWare based PCIe controller | expand

Commit Message

xxm Jan. 27, 2021, 2:24 a.m. UTC
Document DT bindings for PCIe controller found on Rockchip SoC.

Signed-off-by: Simon Xue <xxm@rock-chips.com>
---
 .../bindings/pci/rockchip-dw-pcie.yaml        | 141 ++++++++++++++++++
 1 file changed, 141 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml

Comments

xxm Feb. 22, 2021, 12:59 a.m. UTC | #1
Hi all,

It has been nearly a month since last V4 patch, any new comments?

在 2021/1/27 10:24, Simon Xue 写道:
> Document DT bindings for PCIe controller found on Rockchip SoC.
>
> Signed-off-by: Simon Xue <xxm@rock-chips.com>
> ---
>   .../bindings/pci/rockchip-dw-pcie.yaml        | 141 ++++++++++++++++++
>   1 file changed, 141 insertions(+)
>   create mode 100644 Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
>
> diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> new file mode 100644
> index 000000000000..916eff09332c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
> @@ -0,0 +1,141 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: DesignWare based PCIe RC controller on Rockchip SoCs
> +
> +maintainers:
> +  - Shawn Lin <shawn.lin@rock-chips.com>
> +  - Simon Xue <xxm@rock-chips.com>
> +  - Heiko Stuebner <heiko@sntech.de>
> +
> +description: |+
> +  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
> +  PCIe IP and thus inherits all the common properties defined in
> +  designware-pcie.txt.
> +
> +allOf:
> +  - $ref: /schemas/pci/pci-bus.yaml#
> +
> +# We need a select here so we don't match all nodes with 'snps,dw-pcie'
> +select:
> +  properties:
> +    compatible:
> +      contains:
> +        const: rockchip,rk3568-pcie
> +  required:
> +    - compatible
> +
> +properties:
> +  compatible:
> +    items:
> +      - const: rockchip,rk3568-pcie
> +      - const: snps,dw-pcie
> +
> +  reg:
> +    items:
> +      - description: Data Bus Interface (DBI) registers
> +      - description: Rockchip designed configuration registers
> +      - description: Config registers
> +
> +  reg-names:
> +    items:
> +      - const: dbi
> +      - const: apb
> +      - const: config
> +
> +  clocks:
> +    items:
> +      - description: AHB clock for PCIe master
> +      - description: AHB clock for PCIe slave
> +      - description: AHB clock for PCIe dbi
> +      - description: APB clock for PCIe
> +      - description: Auxiliary clock for PCIe
> +
> +  clock-names:
> +    items:
> +      - const: aclk_mst
> +      - const: aclk_slv
> +      - const: aclk_dbi
> +      - const: pclk
> +      - const: aux
> +
> +  msi-map: true
> +
> +  num-lanes: true
> +
> +  phys:
> +    maxItems: 1
> +
> +  phy-names:
> +    const: pcie-phy
> +
> +  power-domains:
> +    maxItems: 1
> +
> +  ranges:
> +    maxItems: 2
> +
> +  resets:
> +    maxItems: 1
> +
> +  reset-names:
> +    const: pipe
> +
> +  vpcie3v3-supply: true
> +
> +required:
> +  - compatible
> +  - reg
> +  - reg-names
> +  - clocks
> +  - clock-names
> +  - msi-map
> +  - num-lanes
> +  - phys
> +  - phy-names
> +  - power-domains
> +  - resets
> +  - reset-names
> +
> +unevaluatedProperties: false
> +
> +examples:
> +  - |
> +
> +    bus {
> +        #address-cells = <2>;
> +        #size-cells = <2>;
> +
> +        pcie3x2: pcie@fe280000 {
> +            compatible = "rockchip,rk3568-pcie", "snps,dw-pcie";
> +            reg = <0x3 0xc0800000 0x0 0x390000>,
> +                  <0x0 0xfe280000 0x0 0x10000>,
> +                  <0x3 0x80000000 0x0 0x100000>;
> +            reg-names = "dbi", "apb", "config";
> +            bus-range = <0x20 0x2f>;
> +            clocks = <&cru 143>, <&cru 144>,
> +                     <&cru 145>, <&cru 146>,
> +                     <&cru 147>;
> +            clock-names = "aclk_mst", "aclk_slv",
> +                          "aclk_dbi", "pclk",
> +                          "aux";
> +            device_type = "pci";
> +            linux,pci-domain = <2>;
> +            max-link-speed = <2>;
> +            msi-map = <0x2000 &its 0x2000 0x1000>;
> +            num-lanes = <2>;
> +            phys = <&pcie30phy>;
> +            phy-names = "pcie-phy";
> +            power-domains = <&power 15>;
> +            ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
> +                     <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
> +            resets = <&cru 193>;
> +            reset-names = "pipe";
> +            #address-cells = <3>;
> +            #size-cells = <2>;
> +        };
> +    };
> +...
Krzysztof Wilczyński Feb. 22, 2021, 2:37 a.m. UTC | #2
Hi Simon,

[...]
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

The driver is only based on GPL v2.0, should this be the same, or is
there a reason for dual-license?

[...]
> +title: DesignWare based PCIe RC controller on Rockchip SoCs
[...]

What does the "RC" here stands for?  Would it be "Rockchip"?  If so,
then perhaps dropping it would be fine to do, as rest of the title
mentions "Rockchip SoCs"."  What do you think?

Krzysztof
xxm Feb. 22, 2021, 4:19 a.m. UTC | #3
Hi Krzysztof,

在 2021/2/22 10:37, Krzysztof Wilczyński 写道:
> Hi Simon,
>
> [...]
>> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> The driver is only based on GPL v2.0, should this be the same, or is
> there a reason for dual-license?
Will remove BSD-2-Clause
> [...]
>> +title: DesignWare based PCIe RC controller on Rockchip SoCs
> [...]
>
> What does the "RC" here stands for?  Would it be "Rockchip"?  If so,
> then perhaps dropping it would be fine to do, as rest of the title
> mentions "Rockchip SoCs"."  What do you think?

RC = Root Complex, just to distinguish "EP"(End Point), but drop "RC" 
seems fine.

Simon

> Krzysztof
>
>
>
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
new file mode 100644
index 000000000000..916eff09332c
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/rockchip-dw-pcie.yaml
@@ -0,0 +1,141 @@ 
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/rockchip-dw-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: DesignWare based PCIe RC controller on Rockchip SoCs
+
+maintainers:
+  - Shawn Lin <shawn.lin@rock-chips.com>
+  - Simon Xue <xxm@rock-chips.com>
+  - Heiko Stuebner <heiko@sntech.de>
+
+description: |+
+  RK3568 SoC PCIe host controller is based on the Synopsys DesignWare
+  PCIe IP and thus inherits all the common properties defined in
+  designware-pcie.txt.
+
+allOf:
+  - $ref: /schemas/pci/pci-bus.yaml#
+
+# We need a select here so we don't match all nodes with 'snps,dw-pcie'
+select:
+  properties:
+    compatible:
+      contains:
+        const: rockchip,rk3568-pcie
+  required:
+    - compatible
+
+properties:
+  compatible:
+    items:
+      - const: rockchip,rk3568-pcie
+      - const: snps,dw-pcie
+
+  reg:
+    items:
+      - description: Data Bus Interface (DBI) registers
+      - description: Rockchip designed configuration registers
+      - description: Config registers
+
+  reg-names:
+    items:
+      - const: dbi
+      - const: apb
+      - const: config
+
+  clocks:
+    items:
+      - description: AHB clock for PCIe master
+      - description: AHB clock for PCIe slave
+      - description: AHB clock for PCIe dbi
+      - description: APB clock for PCIe
+      - description: Auxiliary clock for PCIe
+
+  clock-names:
+    items:
+      - const: aclk_mst
+      - const: aclk_slv
+      - const: aclk_dbi
+      - const: pclk
+      - const: aux
+
+  msi-map: true
+
+  num-lanes: true
+
+  phys:
+    maxItems: 1
+
+  phy-names:
+    const: pcie-phy
+
+  power-domains:
+    maxItems: 1
+
+  ranges:
+    maxItems: 2
+
+  resets:
+    maxItems: 1
+
+  reset-names:
+    const: pipe
+
+  vpcie3v3-supply: true
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - clocks
+  - clock-names
+  - msi-map
+  - num-lanes
+  - phys
+  - phy-names
+  - power-domains
+  - resets
+  - reset-names
+
+unevaluatedProperties: false
+
+examples:
+  - |
+
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        pcie3x2: pcie@fe280000 {
+            compatible = "rockchip,rk3568-pcie", "snps,dw-pcie";
+            reg = <0x3 0xc0800000 0x0 0x390000>,
+                  <0x0 0xfe280000 0x0 0x10000>,
+                  <0x3 0x80000000 0x0 0x100000>;
+            reg-names = "dbi", "apb", "config";
+            bus-range = <0x20 0x2f>;
+            clocks = <&cru 143>, <&cru 144>,
+                     <&cru 145>, <&cru 146>,
+                     <&cru 147>;
+            clock-names = "aclk_mst", "aclk_slv",
+                          "aclk_dbi", "pclk",
+                          "aux";
+            device_type = "pci";
+            linux,pci-domain = <2>;
+            max-link-speed = <2>;
+            msi-map = <0x2000 &its 0x2000 0x1000>;
+            num-lanes = <2>;
+            phys = <&pcie30phy>;
+            phy-names = "pcie-phy";
+            power-domains = <&power 15>;
+            ranges = <0x81000000 0x0 0x80800000 0x3 0x80800000 0x0 0x100000>,
+                     <0x83000000 0x0 0x80900000 0x3 0x80900000 0x0 0x3f700000>;
+            resets = <&cru 193>;
+            reset-names = "pipe";
+            #address-cells = <3>;
+            #size-cells = <2>;
+        };
+    };
+...