Message ID | 20210310122821.126408-1-qsx@chaotikum.eu (mailing list archive) |
---|---|
State | New, archived |
Headers | show |
Series | arm64: dts: rockchip: add infrared receiver node to rockpro64 | expand |
On Wed, 10 Mar 2021 13:28:21 +0100, Thomas Schneider wrote: > This adds the RockPro64’s infrared receiver to its dtsi. The configuration is > almost the same as on rk3328-rock64, except for the GPIO pins, and thus adapted > from there. Applied, thanks! [1/1] arm64: dts: rockchip: add infrared receiver node to rockpro64 commit: 7c7f041309f73b05d21980f88f29305255e126ee Best regards,
diff --git a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi index 5ab0b9edfc88..d42c75c6dcbd 100644 --- a/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi @@ -36,6 +36,13 @@ power { }; }; + ir-receiver { + compatible = "gpio-ir-receiver"; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_LOW>; + pinctrl-0 = <&ir_int>; + pinctrl-names = "default"; + }; + leds { compatible = "gpio-leds"; pinctrl-names = "default"; @@ -604,6 +611,12 @@ fusb0_int: fusb0-int { }; }; + ir { + ir_int: ir-int { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + leds { work_led_pin: work-led-pin { rockchip,pins = <0 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
This adds the RockPro64’s infrared receiver to its dtsi. The configuration is almost the same as on rk3328-rock64, except for the GPIO pins, and thus adapted from there. Signed-off-by: Thomas Schneider <qsx@chaotikum.eu> --- arch/arm64/boot/dts/rockchip/rk3399-rockpro64.dtsi | 13 +++++++++++++ 1 file changed, 13 insertions(+)