diff mbox series

arm64: dts: rockchip: Add support for USB on helios64

Message ID 20210611081414.1448786-1-uwe@kleine-koenig.org (mailing list archive)
State New
Headers show
Series arm64: dts: rockchip: Add support for USB on helios64 | expand

Commit Message

Uwe Kleine-König June 11, 2021, 8:14 a.m. UTC
This enables the USB hardware needed to access devices on the sockets J1
and J13.

Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
---
 .../dts/rockchip/rk3399-kobol-helios64.dts    | 44 +++++++++++++++++++
 1 file changed, 44 insertions(+)

Comments

Heiko Stübner June 13, 2021, 4:27 p.m. UTC | #1
On Fri, 11 Jun 2021 10:14:14 +0200, Uwe Kleine-König wrote:
> This enables the USB hardware needed to access devices on the sockets J1
> and J13.

Added the missing ";" and
Applied, thanks!

[1/1] arm64: dts: rockchip: Add support for USB on helios64
      commit: 51094deb330623a172b80f7f1cb43f2d6e165c4f

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
index 037dc5cdc3f3..c142649cd1bd 100644
--- a/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3399-kobol-helios64.dts
@@ -155,6 +155,20 @@  regulator-state-mem {
 		};
 	};
 
+	vcc5v0_usb: vcc5v0-usb {
+		compatible = "regulator-fixed";
+		enable-active-high;
+		gpio = <&gpio1 RK_PC6 GPIO_ACTIVE_HIGH>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&vcc5v0_usb_en>;
+		regulator-name = "vcc5v0_usb";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+		vin-supply = <&vcc5v0_perdev>;
+	};
+
 	vcc12v_dcin: vcc12v-dcin {
 		compatible = "regulator-fixed";
 		regulator-name = "vcc12v_dcin";
@@ -407,6 +421,12 @@  pmic_int_l: pmic-int-l {
 		};
 	};
 
+	power {
+		vcc5v0_usb_en: vcc5v0-usb-en {
+			rockchip,pins = <1 RK_PC6 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	vcc3v0-sd {
 		sdmmc0_pwr_h: sdmmc0-pwr-h {
 			rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>;
@@ -449,6 +469,30 @@  &sdmmc {
 	status = "okay";
 };
 
+&tcphy1 {
+	// phy for &usbdrd_dwc3_1
+	status = "okay";
+};
+
+&u2phy1 {
+	status = "okay";
+
+	otg-port {
+		// phy for &usbdrd_dwc3_1
+		phy-supply = <&vcc5v0_usb>
+		status = "okay";
+	};
+};
+
 &uart2 {
 	status = "okay";
 };
+
+&usbdrd3_1 {
+	status = "okay";
+
+	usb@fe900000 {
+		dr_mode = "host";
+		status = "okay";
+	};
+};