diff mbox series

[5/5] arm64: dts: rockchip: rk3568-evb1-v10: add node for sd card

Message ID 20210803185309.10013-6-michael.riesch@wolfvision.net (mailing list archive)
State New
Headers show
Series arm64: dts: rockchip: rk3568-evb1-v10: add sd card support | expand

Commit Message

Michael Riesch Aug. 3, 2021, 6:53 p.m. UTC
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
 arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts | 15 +++++++++++++++
 1 file changed, 15 insertions(+)

Comments

Heiko Stuebner Aug. 3, 2021, 8:48 p.m. UTC | #1
Am Dienstag, 3. August 2021, 20:53:09 CEST schrieb Michael Riesch:
> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
> ---
>  arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts | 15 +++++++++++++++
>  1 file changed, 15 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> index 3ac70a8183c4..b0f5aa8c979c 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
> @@ -17,6 +17,7 @@
>  		ethernet0 = &gmac0;
>  		ethernet1 = &gmac1;
>  		emmc = &sdhci;
> +		sd = &sdmmc0;

same thing as in the previous patch.

I guess you may want something like

	mmc0 = &sdhci;
	mmc1 = &sdmmc0;

maybe?


Heiko

>  	};
>  
>  	chosen: chosen {
> @@ -353,6 +354,20 @@
>  	status = "okay";
>  };
>  
> +&sdmmc0 {
> +	bus-width = <4>;
> +	cap-sd-highspeed;
> +	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
> +	disable-wp;
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
> +	sd-uhs-sdr104;
> +	supports-sd;
> +	vmmc-supply = <&vcc3v3_sd>;
> +	vqmmc-supply = <&vccio_sd>;
> +	status = "okay";
> +};
> +
>  &uart2 {
>  	status = "okay";
>  };
>
Michael Riesch Aug. 4, 2021, 10:03 a.m. UTC | #2
Hi Heiko,

On 8/3/21 10:48 PM, Heiko Stübner wrote:
> Am Dienstag, 3. August 2021, 20:53:09 CEST schrieb Michael Riesch:
>> Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
>> ---
>>  arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts | 15 +++++++++++++++
>>  1 file changed, 15 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
>> index 3ac70a8183c4..b0f5aa8c979c 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
>> +++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
>> @@ -17,6 +17,7 @@
>>  		ethernet0 = &gmac0;
>>  		ethernet1 = &gmac1;
>>  		emmc = &sdhci;
>> +		sd = &sdmmc0;
> 
> same thing as in the previous patch.
> 
> I guess you may want something like
> 
> 	mmc0 = &sdhci;
> 	mmc1 = &sdmmc0;
> 
> maybe?

Thanks for the suggestion, I'll include it in the v2.

Regards, Michael

> 
> 
> Heiko
> 
>>  	};
>>  
>>  	chosen: chosen {
>> @@ -353,6 +354,20 @@
>>  	status = "okay";
>>  };
>>  
>> +&sdmmc0 {
>> +	bus-width = <4>;
>> +	cap-sd-highspeed;
>> +	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
>> +	disable-wp;
>> +	pinctrl-names = "default";
>> +	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
>> +	sd-uhs-sdr104;
>> +	supports-sd;
>> +	vmmc-supply = <&vcc3v3_sd>;
>> +	vqmmc-supply = <&vccio_sd>;
>> +	status = "okay";
>> +};
>> +
>>  &uart2 {
>>  	status = "okay";
>>  };
>>
> 
> 
> 
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
index 3ac70a8183c4..b0f5aa8c979c 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-evb1-v10.dts
@@ -17,6 +17,7 @@ 
 		ethernet0 = &gmac0;
 		ethernet1 = &gmac1;
 		emmc = &sdhci;
+		sd = &sdmmc0;
 	};
 
 	chosen: chosen {
@@ -353,6 +354,20 @@ 
 	status = "okay";
 };
 
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr104;
+	supports-sd;
+	vmmc-supply = <&vcc3v3_sd>;
+	vqmmc-supply = <&vccio_sd>;
+	status = "okay";
+};
+
 &uart2 {
 	status = "okay";
 };