diff mbox series

ARM: dts: rockchip: fix MMC compatibles for rk3288

Message ID 20220125115007.3138311-1-john@metanate.com (mailing list archive)
State New, archived
Headers show
Series ARM: dts: rockchip: fix MMC compatibles for rk3288 | expand

Commit Message

John Keeping Jan. 25, 2022, 11:50 a.m. UTC
Prior to commit 4bac670aa5cb ("mmc: dw_mmc: rockchip: use common_caps")
the mshcN aliases were used in an unusual way by the dw_mmc driver and
affected behaviour.  Now that this has been fixed, rename the mmc
aliases to use the standard form.

Signed-off-by: John Keeping <john@metanate.com>
---
 arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

Comments

Johan Jonker Jan. 25, 2022, 12:14 p.m. UTC | #1
Hi John,

MMC aliases should go in the dts board files.
Sort on reg address, based on availability and without number gab.
(For rk3288 a lot of boards to change. That's why it wasn't done
yet...Could someone pick that up?)

Johan

On 1/25/22 12:50, John Keeping wrote:
> Prior to commit 4bac670aa5cb ("mmc: dw_mmc: rockchip: use common_caps")
> the mshcN aliases were used in an unusual way by the dw_mmc driver and
> affected behaviour.  Now that this has been fixed, rename the mmc
> aliases to use the standard form.
> 
> Signed-off-by: John Keeping <john@metanate.com>
> ---
>  arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
> 
> diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> index aaaa61875701..50fa0a4652b5 100644
> --- a/arch/arm/boot/dts/rk3288.dtsi
> +++ b/arch/arm/boot/dts/rk3288.dtsi
> @@ -25,10 +25,10 @@ aliases {
>  		i2c3 = &i2c3;
>  		i2c4 = &i2c4;
>  		i2c5 = &i2c5;
> -		mshc0 = &emmc;
> -		mshc1 = &sdmmc;
> -		mshc2 = &sdio0;
> -		mshc3 = &sdio1;
> +		mmc0 = &emmc;
> +		mmc1 = &sdmmc;
> +		mmc2 = &sdio0;
> +		mmc3 = &sdio1;
>  		serial0 = &uart0;
>  		serial1 = &uart1;
>  		serial2 = &uart2;
John Keeping Jan. 26, 2022, 11:17 a.m. UTC | #2
Hi Johan,

On Tue, Jan 25, 2022 at 01:14:21PM +0100, Johan Jonker wrote:
> MMC aliases should go in the dts board files.
> Sort on reg address, based on availability and without number gab.
> (For rk3288 a lot of boards to change. That's why it wasn't done
> yet...Could someone pick that up?)

Since there aren't any mmc aliases for rk3288 at the moment, I'll drop
this and send a patch adding them for the one board I have access to.

At some point the nonstandard mshc aliases should be removed, but it
may be best to keep them around for a while given that 5.17 will be the
first kernel that doesn't use these as a weird mechanism for per-port
settings.

> On 1/25/22 12:50, John Keeping wrote:
> > Prior to commit 4bac670aa5cb ("mmc: dw_mmc: rockchip: use common_caps")
> > the mshcN aliases were used in an unusual way by the dw_mmc driver and
> > affected behaviour.  Now that this has been fixed, rename the mmc
> > aliases to use the standard form.
> > 
> > Signed-off-by: John Keeping <john@metanate.com>
> > ---
> >  arch/arm/boot/dts/rk3288.dtsi | 8 ++++----
> >  1 file changed, 4 insertions(+), 4 deletions(-)
> > 
> > diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
> > index aaaa61875701..50fa0a4652b5 100644
> > --- a/arch/arm/boot/dts/rk3288.dtsi
> > +++ b/arch/arm/boot/dts/rk3288.dtsi
> > @@ -25,10 +25,10 @@ aliases {
> >  		i2c3 = &i2c3;
> >  		i2c4 = &i2c4;
> >  		i2c5 = &i2c5;
> > -		mshc0 = &emmc;
> > -		mshc1 = &sdmmc;
> > -		mshc2 = &sdio0;
> > -		mshc3 = &sdio1;
> > +		mmc0 = &emmc;
> > +		mmc1 = &sdmmc;
> > +		mmc2 = &sdio0;
> > +		mmc3 = &sdio1;
> >  		serial0 = &uart0;
> >  		serial1 = &uart1;
> >  		serial2 = &uart2;
diff mbox series

Patch

diff --git a/arch/arm/boot/dts/rk3288.dtsi b/arch/arm/boot/dts/rk3288.dtsi
index aaaa61875701..50fa0a4652b5 100644
--- a/arch/arm/boot/dts/rk3288.dtsi
+++ b/arch/arm/boot/dts/rk3288.dtsi
@@ -25,10 +25,10 @@  aliases {
 		i2c3 = &i2c3;
 		i2c4 = &i2c4;
 		i2c5 = &i2c5;
-		mshc0 = &emmc;
-		mshc1 = &sdmmc;
-		mshc2 = &sdio0;
-		mshc3 = &sdio1;
+		mmc0 = &emmc;
+		mmc1 = &sdmmc;
+		mmc2 = &sdio0;
+		mmc3 = &sdio1;
 		serial0 = &uart0;
 		serial1 = &uart1;
 		serial2 = &uart2;