diff mbox series

[v2,3/4] arm64: dts: rockchip: add the usb3 nodes to rk356x

Message ID 20220225131602.2283499-4-michael.riesch@wolfvision.net (mailing list archive)
State New, archived
Headers show
Series arm64: dts: rockchip: add usb3 support to rk356x | expand

Commit Message

Michael Riesch Feb. 25, 2022, 1:16 p.m. UTC
The Rockchip RK3566 and RK3568 feature two USB 3.0 xHCI controllers,
one of them with Dual Role Device (DRD) capability.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
 arch/arm64/boot/dts/rockchip/rk3568.dtsi |  5 ++++
 arch/arm64/boot/dts/rockchip/rk356x.dtsi | 30 ++++++++++++++++++++++++
 2 files changed, 35 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568.dtsi b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
index ecc0f3015915..25f6398e5a66 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3568.dtsi
@@ -100,3 +100,8 @@  opp-1992000000 {
 		opp-microvolt = <1150000 1150000 1150000>;
 	};
 };
+
+&usb_host0_xhci {
+	phys = <&usb2phy0_otg>, <&combphy0 PHY_TYPE_USB3>;
+	phy-names = "usb2-phy", "usb3-phy";
+};
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 742f5adcdf2b..9ea6f551b9f4 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -230,6 +230,36 @@  scmi_shmem: sram@0 {
 		};
 	};
 
+	usb_host0_xhci: usb@fcc00000 {
+		compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+		reg = <0x0 0xfcc00000 0x0 0x400000>;
+		interrupts = <GIC_SPI 169 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_USB3OTG0_REF>, <&cru CLK_USB3OTG0_SUSPEND>,
+			 <&cru ACLK_USB3OTG0>;
+		clock-names = "ref_clk", "suspend_clk", "bus_clk";
+		dr_mode = "otg";
+		phy_type = "utmi_wide";
+		power-domains = <&power RK3568_PD_PIPE>;
+		resets = <&cru SRST_USB3OTG0>;
+		status = "disabled";
+	};
+
+	usb_host1_xhci: usb@fd000000 {
+		compatible = "rockchip,rk3568-dwc3", "snps,dwc3";
+		reg = <0x0 0xfd000000 0x0 0x400000>;
+		interrupts = <GIC_SPI 170 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&cru CLK_USB3OTG1_REF>, <&cru CLK_USB3OTG1_SUSPEND>,
+			 <&cru ACLK_USB3OTG1>;
+		clock-names = "ref_clk", "suspend_clk", "bus_clk";
+		dr_mode = "host";
+		phy_type = "utmi_wide";
+		phys = <&usb2phy0_host>, <&combphy1 PHY_TYPE_USB3>;
+		phy-names = "usb2-phy", "usb3-phy";
+		power-domains = <&power RK3568_PD_PIPE>;
+		resets = <&cru SRST_USB3OTG1>;
+		status = "disabled";
+	};
+
 	gic: interrupt-controller@fd400000 {
 		compatible = "arm,gic-v3";
 		reg = <0x0 0xfd400000 0 0x10000>, /* GICD */