diff mbox series

[3/3] arm64: dts: rockchip: enable vop2 and hdmi tx on rock-3a

Message ID 20220304161130.34977-4-michael.riesch@wolfvision.net (mailing list archive)
State New, archived
Headers show
Series arm64: dts: rockchip: add basic dts for the radxa rock3 model a | expand

Commit Message

Michael Riesch March 4, 2022, 4:11 p.m. UTC
Enable the RK356x Video Output Processor (VOP) 2 on the Radxa
ROCK3 Model A.

Signed-off-by: Michael Riesch <michael.riesch@wolfvision.net>
---
 .../boot/dts/rockchip/rk3568-rock-3a.dts      | 47 +++++++++++++++++++
 1 file changed, 47 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
index 18d2d8e5e693..e568ce377055 100644
--- a/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3568-rock-3a.dts
@@ -4,6 +4,7 @@ 
 #include <dt-bindings/gpio/gpio.h>
 #include <dt-bindings/leds/common.h>
 #include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/soc/rockchip,vop2.h>
 #include "rk3568.dtsi"
 
 / {
@@ -20,6 +21,17 @@  chosen: chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
+	hdmi-con {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_in: endpoint {
+				remote-endpoint = <&hdmi_out_con>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -134,6 +146,24 @@  &gpu {
 	status = "okay";
 };
 
+&hdmi {
+	avdd-0v9-supply = <&vdda0v9_image>;
+	avdd-1v8-supply = <&vcca1v8_image>;
+	status = "okay";
+};
+
+&hdmi_in {
+	hdmi_in_vp0: endpoint {
+		remote-endpoint = <&vp0_out_hdmi>;
+	};
+};
+
+&hdmi_out {
+	hdmi_out_con: endpoint {
+		remote-endpoint = <&hdmi_con_in>;
+	};
+};
+
 &i2c0 {
 	status = "okay";
 
@@ -499,3 +529,20 @@  &usb2phy1_otg {
 	phy-supply = <&vcc5v0_usb_host>;
 	status = "okay";
 };
+
+&vop {
+	assigned-clocks = <&cru DCLK_VOP0>, <&cru DCLK_VOP1>;
+	assigned-clock-parents = <&pmucru PLL_HPLL>, <&cru PLL_VPLL>;
+	status = "okay";
+};
+
+&vop_mmu {
+	status = "okay";
+};
+
+&vp0 {
+	vp0_out_hdmi: endpoint@ROCKCHIP_VOP2_EP_HDMI0 {
+		reg = <ROCKCHIP_VOP2_EP_HDMI0>;
+		remote-endpoint = <&hdmi_in_vp0>;
+	};
+};