diff mbox series

[RFC,v2,2/4] net: dsa: mt7530: rework mt753[01]_setup

Message ID 20220430130347.15190-3-linux@fw-web.de (mailing list archive)
State New
Headers show
Series Support mt7531 on BPI-R2 Pro | expand

Commit Message

Frank Wunderlich April 30, 2022, 1:03 p.m. UTC
From: Frank Wunderlich <frank-w@public-files.de>

Enumerate available cpu-ports instead of using hardcoded constant.

Suggested-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
---
 drivers/net/dsa/mt7530.c | 25 +++++++++++++++++++++----
 1 file changed, 21 insertions(+), 4 deletions(-)

Comments

Vladimir Oltean May 4, 2022, 3:21 p.m. UTC | #1
On Sat, Apr 30, 2022 at 03:03:45PM +0200, Frank Wunderlich wrote:
> From: Frank Wunderlich <frank-w@public-files.de>
> 
> Enumerate available cpu-ports instead of using hardcoded constant.
> 
> Suggested-by: Vladimir Oltean <olteanv@gmail.com>
> Signed-off-by: Frank Wunderlich <frank-w@public-files.de>
> ---

Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
diff mbox series

Patch

diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 46dee0714382..144c29f8fefc 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2087,11 +2087,12 @@  static int
 mt7530_setup(struct dsa_switch *ds)
 {
 	struct mt7530_priv *priv = ds->priv;
+	struct device_node *dn = NULL;
 	struct device_node *phy_node;
 	struct device_node *mac_np;
 	struct mt7530_dummy_poll p;
 	phy_interface_t interface;
-	struct device_node *dn;
+	struct dsa_port *cpu_dp;
 	u32 id, val;
 	int ret, i;
 
@@ -2099,7 +2100,19 @@  mt7530_setup(struct dsa_switch *ds)
 	 * controller also is the container for two GMACs nodes representing
 	 * as two netdev instances.
 	 */
-	dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent;
+	dsa_switch_for_each_cpu_port(cpu_dp, ds) {
+		dn = cpu_dp->master->dev.of_node->parent;
+		/* It doesn't matter which CPU port is found first,
+		 * their masters should share the same parent OF node
+		 */
+		break;
+	}
+
+	if (!dn) {
+		dev_err(ds->dev, "parent OF node of DSA master not found");
+		return -EINVAL;
+	}
+
 	ds->assisted_learning_on_cpu_port = true;
 	ds->mtu_enforcement_ingress = true;
 
@@ -2260,6 +2273,7 @@  mt7531_setup(struct dsa_switch *ds)
 {
 	struct mt7530_priv *priv = ds->priv;
 	struct mt7530_dummy_poll p;
+	struct dsa_port *cpu_dp;
 	u32 val, id;
 	int ret, i;
 
@@ -2332,8 +2346,11 @@  mt7531_setup(struct dsa_switch *ds)
 				 CORE_PLL_GROUP4, val);
 
 	/* BPDU to CPU port */
-	mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
-		   BIT(MT7530_CPU_PORT));
+	dsa_switch_for_each_cpu_port(cpu_dp, ds) {
+		mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK,
+			   BIT(cpu_dp->index));
+		break;
+	}
 	mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK,
 		   MT753X_BPDU_CPU_ONLY);