diff mbox series

[4/4] arm64: dts: rockchip: px30: use rk gpio naming convention into reset-gpios

Message ID 20220519075117.1003520-5-tommaso.merciai@amarulasolutions.com (mailing list archive)
State New
Headers show
Series None | expand

Commit Message

Tommaso Merciai May 19, 2022, 7:51 a.m. UTC
Use rk gpio naming convention into reset-gpios of ov5695 camera

Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
Tested-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
---
 arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Michael Trimarchi May 23, 2022, 8:16 a.m. UTC | #1
Hi

On Thu, May 19, 2022 at 9:51 AM Tommaso Merciai
<tommaso.merciai@amarulasolutions.com> wrote:
>
> Use rk gpio naming convention into reset-gpios of ov5695 camera
>
> Signed-off-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> Tested-by: Tommaso Merciai <tommaso.merciai@amarulasolutions.com>
> ---
>  arch/arm64/boot/dts/rockchip/px30-evb.dts | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
> index 0d05a1b098bc..07008d84434c 100644
> --- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
> +++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
> @@ -450,8 +450,8 @@ ov5695: ov5695@36 {
>                 dvdd-supply = <&vcc1v5_dvp>;
>                 dovdd-supply = <&vcc1v8_dvp>;
>                 pinctrl-names = "default";
> -               reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
>                 pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
> +               reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
>

Reviewed-by: Michael Trimarchi <michael@amarulasolutions.com>

>                 port {
>                         ucam_out: endpoint {
> --
> 2.25.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/px30-evb.dts b/arch/arm64/boot/dts/rockchip/px30-evb.dts
index 0d05a1b098bc..07008d84434c 100644
--- a/arch/arm64/boot/dts/rockchip/px30-evb.dts
+++ b/arch/arm64/boot/dts/rockchip/px30-evb.dts
@@ -450,8 +450,8 @@  ov5695: ov5695@36 {
 		dvdd-supply = <&vcc1v5_dvp>;
 		dovdd-supply = <&vcc1v8_dvp>;
 		pinctrl-names = "default";
-		reset-gpios = <&gpio2 14 GPIO_ACTIVE_LOW>;
 		pinctrl-0 = <&cif_clkout_m0 &mipi_pdn>;
+		reset-gpios = <&gpio2 RK_PB6 GPIO_ACTIVE_LOW>;
 
 		port {
 			ucam_out: endpoint {