diff mbox series

[4/5] arm64: dts: rockchip: Add Odroid Go Super

Message ID 20221112141840.516224-5-maccraft123mc@gmail.com (mailing list archive)
State New, archived
Headers show
Series [1/5] arm64: dts: rockchip: Move most of Odroid Go Advance DTS into a DTSI | expand

Commit Message

Maya Matuszczyk Nov. 12, 2022, 2:18 p.m. UTC
This device is another revision of Odroid Go Advance, with added two
volume buttons, a second analog stick and a bigger screen that isn't yet
supported in the Mainline Kernel.

Signed-off-by: Maya Matuszczyk <maccraft123mc@gmail.com>
---
 arch/arm64/boot/dts/rockchip/Makefile         |   1 +
 .../boot/dts/rockchip/rk3326-odroid-go3.dts   | 161 ++++++++++++++++++
 2 files changed, 162 insertions(+)
 create mode 100644 arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index 12446f531d29..142c83d2e5aa 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -9,6 +9,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3318-a95x-z2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go2-v11.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3326-odroid-go3.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-a1.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-evb.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3328-nanopi-r2s.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
new file mode 100644
index 000000000000..4b6c896d8abd
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3326-odroid-go3.dts
@@ -0,0 +1,161 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Hardkernel Co., Ltd
+ * Copyright (c) 2020 Theobroma Systems Design und Consulting GmbH
+ * Copyright (c) 2022 Maya Matuszczyk <maccraft123mc@gmail.com>
+ */
+
+/dts-v1/;
+#include "rk3326-odroid-go.dtsi"
+
+/ {
+	model = "ODROID-GO Super";
+	compatible = "hardkernel,rk3326-odroid-go3", "rockchip,rk3326";
+
+	joystick_mux_controller: mux-controller {
+		status = "okay";
+		compatible = "gpio-mux";
+		pinctrl = <&mux_en_pins>;
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&gpio3 RK_PB3 GPIO_ACTIVE_LOW>,
+			    <&gpio3 RK_PB0 GPIO_ACTIVE_LOW>;
+	};
+
+	joystick_mux: adc-mux {
+		status = "okay";
+		compatible = "io-channel-mux";
+		io-channels = <&saradc 1>;
+		io-channel-names = "parent";
+		#io-channel-cells = <1>;
+
+		mux-controls = <&joystick_mux_controller>;
+
+		channels = "0", "1", "2", "3";
+	};
+
+	analog_sticks: adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&joystick_mux 0>,
+			      <&joystick_mux 1>,
+			      <&joystick_mux 2>,
+			      <&joystick_mux 3>;
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RX>;
+		};
+		axis@2 {
+			reg = <2>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <10>;
+			abs-fuzz = <10>;
+			abs-range = <180 800>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	battery: battery {
+		compatible = "simple-battery";
+		charge-full-design-microamp-hours = <4000000>;
+		charge-term-current-microamp = <300000>;
+		constant-charge-current-max-microamp = <2000000>;
+		constant-charge-voltage-max-microvolt = <4200000>;
+		factory-internal-resistance-micro-ohms = <180000>;
+		voltage-max-design-microvolt = <4100000>;
+		voltage-min-design-microvolt = <3500000>;
+
+		ocv-capacity-celsius = <20>;
+		ocv-capacity-table-0 =  <4046950 100>, <4001920 95>, <3967900 90>, <3919950 85>,
+					<3888450 80>, <3861850 75>, <3831540 70>, <3799130 65>,
+					<3768190 60>, <3745650 55>, <3726610 50>, <3711630 45>,
+					<3696720 40>, <3685660 35>, <3674950 30>, <3663050 25>,
+					<3649470 20>, <3635260 15>, <3616920 10>, <3592440 5>,
+					<3574170 0>;
+	};
+};
+
+&builtin_gamepad {
+	button-sw19 {
+		gpios = <&gpio3 RK_PB1 GPIO_ACTIVE_LOW>;
+		label = "SELECT";
+		linux,code = <BTN_SELECT>;
+	};
+	/* note that TR2 and TL2 are swapped */
+	button-sw20 {
+		gpios = <&gpio3 RK_PB7 GPIO_ACTIVE_LOW>;
+		label = "TOP-RIGHT 2";
+		linux,code = <BTN_TR2>;
+	};
+	button-sw21 {
+		gpios = <&gpio3 RK_PB2 GPIO_ACTIVE_LOW>;
+		label = "TOP-LEFT 2";
+		linux,code = <BTN_TL2>;
+	};
+	button-sw22 {
+		gpios = <&gpio3 RK_PB4 GPIO_ACTIVE_LOW>;
+		label = "START";
+		linux,code = <BTN_START>;
+	};
+};
+
+&internal_display {
+	status = "disabled";
+};
+
+&rk817_charger {
+	monitored-battery = <&battery>;
+};
+
+&pinctrl {
+	btns {
+		btn_pins: btn-pins {
+			rockchip,pins = <1 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<1 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA0 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA3 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA5 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA6 RK_FUNC_GPIO &pcfg_pull_up>,
+					<2 RK_PA7 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB1 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB2 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB4 RK_FUNC_GPIO &pcfg_pull_up>,
+					<3 RK_PB7 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+	joystick {
+		mux_en_pins: mux-pins {
+			rockchip,pins = <3 RK_PB5 RK_FUNC_GPIO &pcfg_output_low>;
+		};
+	};
+};