diff mbox series

[RESEND,v2,2/3] usb: typec: tcpm: fix multiple times discover svids error

Message ID 20230320100711.3708-3-frank.wang@rock-chips.com (mailing list archive)
State New, archived
Headers show
Series Fix some defects related Type-C TCPM | expand

Commit Message

Frank Wang March 20, 2023, 10:07 a.m. UTC
PD3.0 Spec 6.4.4.3.2 say that only Responder supports 12 or more SVIDs,
the Discover SVIDs Command Shall be executed multiple times until a
Discover SVIDs VDO is returned ending either with a SVID value of
0x0000 in the last part of the last VDO or with a VDO containing two
SVIDs with values of 0x0000.

In the current implementation, if the last VDO does not find that the
Discover SVIDs Command would be executed multiple times even if the
Responder SVIDs are less than 12, and we found some odd dockers just
meet this case. So fix it.

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
---
 drivers/usb/typec/tcpm/tcpm.c | 16 +++++++++++++++-
 1 file changed, 15 insertions(+), 1 deletion(-)
diff mbox series

Patch

diff --git a/drivers/usb/typec/tcpm/tcpm.c b/drivers/usb/typec/tcpm/tcpm.c
index 56782dd05e2ec..13830b5e2d09f 100644
--- a/drivers/usb/typec/tcpm/tcpm.c
+++ b/drivers/usb/typec/tcpm/tcpm.c
@@ -1515,7 +1515,21 @@  static bool svdm_consume_svids(struct tcpm_port *port, const u32 *p, int cnt)
 		pmdata->svids[pmdata->nsvids++] = svid;
 		tcpm_log(port, "SVID %d: 0x%x", pmdata->nsvids, svid);
 	}
-	return true;
+
+	/*
+	 * PD3.0 Spec 6.4.4.3.2: The SVIDs are returned 2 per VDO (see Table
+	 * 6-43), and can be returned maximum 6 VDOs per response (see Figure
+	 * 6-19). If the Respondersupports 12 or more SVID then the Discover
+	 * SVIDs Command Shall be executed multiple times until a Discover
+	 * SVIDs VDO is returned ending either with a SVID value of 0x0000 in
+	 * the last part of the last VDO or with a VDO containing two SVIDs
+	 * with values of 0x0000.
+	 *
+	 * However, some odd dockers support SVIDs less than 12 but without
+	 * 0x0000 in the last VDO, so we need to break the Discover SVIDs
+	 * request and return false here.
+	 */
+	return cnt == 7;
 abort:
 	tcpm_log(port, "SVID_DISCOVERY_MAX(%d) too low!", SVID_DISCOVERY_MAX);
 	return false;