@@ -136,6 +136,8 @@ cpu_b0: cpu@400 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+ assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>;
+ assigned-clock-rates = <1200000000>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -174,6 +176,8 @@ cpu_b2: cpu@600 {
enable-method = "psci";
capacity-dmips-mhz = <1024>;
clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+ assigned-clocks = <&scmi_clk SCMI_CLK_CPUB23>;
+ assigned-clock-rates = <1200000000>;
cpu-idle-states = <&CPU_SLEEP>;
i-cache-size = <65536>;
i-cache-line-size = <64>;
@@ -313,10 +317,6 @@ scmi: scmi {
scmi_clk: protocol@14 {
reg = <0x14>;
- assigned-clocks = <&scmi_clk SCMI_CLK_CPUB01>,
- <&scmi_clk SCMI_CLK_CPUB23>;
- assigned-clock-rates = <1200000000>,
- <1200000000>;
#clock-cells = <1>;
};
Since commit df4fdd0db475 ("dt-bindings: firmware: arm,scmi: Restrict protocol child node properties") the following dtbs_check warning is shown: rk3588-rock-5b.dtb: scmi: protocol@14: Unevaluated properties are not allowed ('assigned-clock-rates', 'assigned-clocks' were unexpected) Since adding the missing properties to Documentation/devicetree/bindings/firmware/arm,scmi.yaml was not an acceptable solution, move them from scmi to cpu nodes. Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com> --- arch/arm64/boot/dts/rockchip/rk3588s.dtsi | 8 ++++---- 1 file changed, 4 insertions(+), 4 deletions(-)