diff mbox series

dt-bindings: cleanup DTS example whitespaces

Message ID 20230702182308.7583-1-krzysztof.kozlowski@linaro.org (mailing list archive)
State New, archived
Headers show
Series dt-bindings: cleanup DTS example whitespaces | expand

Commit Message

Krzysztof Kozlowski July 2, 2023, 6:23 p.m. UTC
The DTS code coding style expects spaces around '=' sign.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

---

Rob,

Maybe this could go via your tree? Rebased on your for-next:
v6.4-rc2-45-gf0ac35049606
---
 .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
 .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
 .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
 .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
 .../display/rockchip/rockchip-vop.yaml         |  4 ++--
 .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
 .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
 .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
 .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
 .../bindings/net/mediatek-dwmac.yaml           |  2 +-
 .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
 .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
 .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-
 .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
 .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
 15 files changed, 30 insertions(+), 30 deletions(-)

Comments

Mike Leach July 3, 2023, 9:45 a.m. UTC | #1
On Sun, 2 Jul 2023 at 19:23, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> The DTS code coding style expects spaces around '=' sign.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Rob,
>
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>  .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>  .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>  .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
>  .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>  .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>  .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>  .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>  .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>  .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>  .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>  .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>  .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
>  .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-
>  .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>  .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
>  15 files changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> index 0c5b875cb654..d6c84b6e7fe6 100644
> --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> @@ -287,7 +287,7 @@ examples:
>              arm,trig-in-sigs = <0 1>;
>              arm,trig-in-types = <PE_DBGTRIGGER
>                                   PE_PMUIRQ>;
> -            arm,trig-out-sigs=<0 1 2 >;
> +            arm,trig-out-sigs = <0 1 2 >;
>              arm,trig-out-types = <PE_EDBGREQ
>                                    PE_DBGRESTART
>                                    PE_CTIIRQ>;
> @@ -309,24 +309,24 @@ examples:
>
>        trig-conns@0 {
>          reg = <0>;
> -        arm,trig-in-sigs=<0>;
> -        arm,trig-in-types=<GEN_INTREQ>;
> -        arm,trig-out-sigs=<0>;
> -        arm,trig-out-types=<GEN_HALTREQ>;
> +        arm,trig-in-sigs = <0>;
> +        arm,trig-in-types = <GEN_INTREQ>;
> +        arm,trig-out-sigs = <0>;
> +        arm,trig-out-types = <GEN_HALTREQ>;
>          arm,trig-conn-name = "sys_profiler";
>        };
>
>        trig-conns@1 {
>          reg = <1>;
> -        arm,trig-out-sigs=<2 3>;
> -        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-out-sigs = <2 3>;
> +        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>          arm,trig-conn-name = "watchdog";
>        };
>
>        trig-conns@2 {
>          reg = <2>;
> -        arm,trig-in-sigs=<1 6>;
> -        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-in-sigs = <1 6>;
> +        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>          arm,trig-conn-name = "g_counter";
>        };
>      };

for above CTI chagnes

Acked-by: Mike Leach <mike.leach@linaro.org>


> diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> index 91b96065f7df..86b59de7707e 100644
> --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> @@ -96,8 +96,8 @@ examples:
>        compatible = "ti,k2g-sci";
>        ti,system-reboot-controller;
>        mbox-names = "rx", "tx";
> -      mboxes= <&msgmgr 5 2>,
> -              <&msgmgr 0 0>;
> +      mboxes = <&msgmgr 5 2>,
> +               <&msgmgr 0 0>;
>        reg-names = "debug_messages";
>        reg = <0x02921800 0x800>;
>      };
> @@ -107,8 +107,8 @@ examples:
>        compatible = "ti,k2g-sci";
>        ti,host-id = <12>;
>        mbox-names = "rx", "tx";
> -      mboxes= <&secure_proxy_main 11>,
> -              <&secure_proxy_main 13>;
> +      mboxes = <&secure_proxy_main 11>,
> +               <&secure_proxy_main 13>;
>        reg-names = "debug_messages";
>        reg = <0x44083000 0x1000>;
>
> diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> index 029d72822d8b..65b02c7a1211 100644
> --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> @@ -225,7 +225,7 @@ examples:
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>
>      gmu: gmu@506a000 {
> -        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
> +        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
>
>          reg = <0x506a000 0x30000>,
>                <0xb280000 0x10000>,
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> index 1cdc91b3439f..200fbf1c74a0 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> @@ -74,7 +74,7 @@ examples:
>              vdd3-supply = <&vcclcd_reg>;
>              vci-supply = <&vlcd_reg>;
>              reset-gpios = <&gpy4 5 0>;
> -            power-on-delay= <50>;
> +            power-on-delay = <50>;
>              reset-delay = <100>;
>              init-delay = <100>;
>              panel-width-mm = <58>;
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> index 6f43d885c9b3..df61cb5f5c54 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> @@ -121,11 +121,11 @@ examples:
>          #size-cells = <0>;
>          vopb_out_edp: endpoint@0 {
>            reg = <0>;
> -          remote-endpoint=<&edp_in_vopb>;
> +          remote-endpoint = <&edp_in_vopb>;
>          };
>          vopb_out_hdmi: endpoint@1 {
>            reg = <1>;
> -          remote-endpoint=<&hdmi_in_vopb>;
> +          remote-endpoint = <&hdmi_in_vopb>;
>          };
>        };
>      };
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> index 9b072b057f16..a60b1e100ee4 100644
> --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> @@ -35,7 +35,7 @@ unevaluatedProperties: false
>  examples:
>    - |
>      spi {
> -        #address-cells= <1>;
> +        #address-cells = <1>;
>          #size-cells = <0>;
>
>          adc@0 {
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> index 7dde7967c886..1e72b8808d24 100644
> --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -137,7 +137,7 @@ examples:
>
>                  cru_parallel_in: endpoint@0 {
>                      reg = <0>;
> -                    remote-endpoint= <&ov5642>;
> +                    remote-endpoint = <&ov5642>;
>                      hsync-active = <1>;
>                      vsync-active = <1>;
>                  };
> @@ -150,7 +150,7 @@ examples:
>
>                  cru_csi_in: endpoint@0 {
>                      reg = <0>;
> -                    remote-endpoint= <&csi_cru_in>;
> +                    remote-endpoint = <&csi_cru_in>;
>                  };
>              };
>          };
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> index 91e8f368fb52..324703bfb1bd 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> @@ -303,11 +303,11 @@ examples:
>
>                              vin0csi20: endpoint@0 {
>                                      reg = <0>;
> -                                    remote-endpoint= <&csi20vin0>;
> +                                    remote-endpoint = <&csi20vin0>;
>                              };
>                              vin0csi40: endpoint@2 {
>                                      reg = <2>;
> -                                    remote-endpoint= <&csi40vin0>;
> +                                    remote-endpoint = <&csi40vin0>;
>                              };
>                      };
>              };
> diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> index f8c976898a95..18f6733408b4 100644
> --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> @@ -164,7 +164,7 @@ examples:
>              reg = <0 0xf80000>;
>          };
>          firmware@f80000 {
> -            label ="firmware";
> +            label = "firmware";
>              reg = <0xf80000 0x80000>;
>              read-only;
>          };
> diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> index 0fa2132fa4f4..400aedb58205 100644
> --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> @@ -156,7 +156,7 @@ examples:
>          reg = <0x1101c000 0x1300>;
>          interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
>          interrupt-names = "macirq";
> -        phy-mode ="rgmii-rxid";
> +        phy-mode = "rgmii-rxid";
>          mac-address = [00 55 7b b5 7d f7];
>          clock-names = "axi",
>                        "apb",
> diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> index 50f46a6898b1..4adab0149108 100644
> --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> @@ -42,8 +42,8 @@ examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>      pmu {
> -        #address-cells=<2>;
> -        #size-cells=<2>;
> +        #address-cells = <2>;
> +        #size-cells = <2>;
>
>          pmu@ff638000 {
>              compatible = "amlogic,g12a-ddr-pmu";
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> index 26f2b887cfc1..b8d77165c4a1 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> @@ -83,7 +83,7 @@ examples:
>          clocks = <&clk26m>;
>          clock-output-names = "mipi_tx0_pll";
>          drive-strength-microamp = <4000>;
> -        nvmem-cells= <&mipi_tx_calibration>;
> +        nvmem-cells = <&mipi_tx_calibration>;
>          nvmem-cell-names = "calibration-data";
>          #clock-cells = <0>;
>          #phy-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 3100cb870170..76e8ca44906a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -75,7 +75,7 @@ additionalProperties: false
>  examples:
>    - |
>      remoteproc@1c {
> -      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
> +      compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
>        reg = <0x1c 0x8>, <0x38 0x8>;
>        reg-names = "remap", "cpu";
>        resets = <&media_cpu_reset>;
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> index 478214ab045e..a59d91243ac8 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> @@ -304,7 +304,7 @@ examples:
>    # Dual role switch with type-c
>    - |
>      usb@11201000 {
> -        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
> +        compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
>          reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
>          reg-names = "mac", "ippc";
>          interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> index d25fc708e32c..fec5651f5602 100644
> --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> @@ -92,7 +92,7 @@ examples:
>
>          usb@31100000 {
>            compatible = "snps,dwc3";
> -          reg =<0x00 0x31100000 0x00 0x50000>;
> +          reg = <0x00 0x31100000 0x00 0x50000>;
>            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
>                         <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
>            interrupt-names = "host", "peripheral";
> --
> 2.34.1
>
>
> _______________________________________________
> linux-arm-kernel mailing list
> linux-arm-kernel@lists.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Jonathan Cameron July 3, 2023, 11:32 a.m. UTC | #2
On Sun,  2 Jul 2023 20:23:08 +0200
Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> wrote:

> The DTS code coding style expects spaces around '=' sign.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
For the IIO one.
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>

Thanks for tidying these up.

Jonathan

> ---
> 
> Rob,
> 
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>  .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>  .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>  .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
>  .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>  .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>  .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>  .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>  .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>  .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>  .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>  .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>  .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
>  .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-
>  .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>  .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
>  15 files changed, 30 insertions(+), 30 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> index 0c5b875cb654..d6c84b6e7fe6 100644
> --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> @@ -287,7 +287,7 @@ examples:
>              arm,trig-in-sigs = <0 1>;
>              arm,trig-in-types = <PE_DBGTRIGGER
>                                   PE_PMUIRQ>;  
> -            arm,trig-out-sigs=<0 1 2 >;
> +            arm,trig-out-sigs = <0 1 2 >;
>              arm,trig-out-types = <PE_EDBGREQ
>                                    PE_DBGRESTART
>                                    PE_CTIIRQ>;  
> @@ -309,24 +309,24 @@ examples:
>  
>        trig-conns@0 {
>          reg = <0>;
> -        arm,trig-in-sigs=<0>;
> -        arm,trig-in-types=<GEN_INTREQ>;
> -        arm,trig-out-sigs=<0>;
> -        arm,trig-out-types=<GEN_HALTREQ>;
> +        arm,trig-in-sigs = <0>;
> +        arm,trig-in-types = <GEN_INTREQ>;
> +        arm,trig-out-sigs = <0>;
> +        arm,trig-out-types = <GEN_HALTREQ>;
>          arm,trig-conn-name = "sys_profiler";
>        };
>  
>        trig-conns@1 {
>          reg = <1>;
> -        arm,trig-out-sigs=<2 3>;
> -        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-out-sigs = <2 3>;
> +        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>          arm,trig-conn-name = "watchdog";
>        };
>  
>        trig-conns@2 {
>          reg = <2>;
> -        arm,trig-in-sigs=<1 6>;
> -        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-in-sigs = <1 6>;
> +        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>          arm,trig-conn-name = "g_counter";
>        };
>      };
> diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> index 91b96065f7df..86b59de7707e 100644
> --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> @@ -96,8 +96,8 @@ examples:
>        compatible = "ti,k2g-sci";
>        ti,system-reboot-controller;
>        mbox-names = "rx", "tx";
> -      mboxes= <&msgmgr 5 2>,
> -              <&msgmgr 0 0>;
> +      mboxes = <&msgmgr 5 2>,
> +               <&msgmgr 0 0>;
>        reg-names = "debug_messages";
>        reg = <0x02921800 0x800>;
>      };
> @@ -107,8 +107,8 @@ examples:
>        compatible = "ti,k2g-sci";
>        ti,host-id = <12>;
>        mbox-names = "rx", "tx";
> -      mboxes= <&secure_proxy_main 11>,
> -              <&secure_proxy_main 13>;
> +      mboxes = <&secure_proxy_main 11>,
> +               <&secure_proxy_main 13>;
>        reg-names = "debug_messages";
>        reg = <0x44083000 0x1000>;
>  
> diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> index 029d72822d8b..65b02c7a1211 100644
> --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> @@ -225,7 +225,7 @@ examples:
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>  
>      gmu: gmu@506a000 {
> -        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
> +        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
>  
>          reg = <0x506a000 0x30000>,
>                <0xb280000 0x10000>,
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> index 1cdc91b3439f..200fbf1c74a0 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> @@ -74,7 +74,7 @@ examples:
>              vdd3-supply = <&vcclcd_reg>;
>              vci-supply = <&vlcd_reg>;
>              reset-gpios = <&gpy4 5 0>;
> -            power-on-delay= <50>;
> +            power-on-delay = <50>;
>              reset-delay = <100>;
>              init-delay = <100>;
>              panel-width-mm = <58>;
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> index 6f43d885c9b3..df61cb5f5c54 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> @@ -121,11 +121,11 @@ examples:
>          #size-cells = <0>;
>          vopb_out_edp: endpoint@0 {
>            reg = <0>;
> -          remote-endpoint=<&edp_in_vopb>;
> +          remote-endpoint = <&edp_in_vopb>;
>          };
>          vopb_out_hdmi: endpoint@1 {
>            reg = <1>;
> -          remote-endpoint=<&hdmi_in_vopb>;
> +          remote-endpoint = <&hdmi_in_vopb>;
>          };
>        };
>      };
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> index 9b072b057f16..a60b1e100ee4 100644
> --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> @@ -35,7 +35,7 @@ unevaluatedProperties: false
>  examples:
>    - |
>      spi {
> -        #address-cells= <1>;
> +        #address-cells = <1>;
>          #size-cells = <0>;
>  
>          adc@0 {
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> index 7dde7967c886..1e72b8808d24 100644
> --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -137,7 +137,7 @@ examples:
>  
>                  cru_parallel_in: endpoint@0 {
>                      reg = <0>;
> -                    remote-endpoint= <&ov5642>;
> +                    remote-endpoint = <&ov5642>;
>                      hsync-active = <1>;
>                      vsync-active = <1>;
>                  };
> @@ -150,7 +150,7 @@ examples:
>  
>                  cru_csi_in: endpoint@0 {
>                      reg = <0>;
> -                    remote-endpoint= <&csi_cru_in>;
> +                    remote-endpoint = <&csi_cru_in>;
>                  };
>              };
>          };
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> index 91e8f368fb52..324703bfb1bd 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> @@ -303,11 +303,11 @@ examples:
>  
>                              vin0csi20: endpoint@0 {
>                                      reg = <0>;
> -                                    remote-endpoint= <&csi20vin0>;
> +                                    remote-endpoint = <&csi20vin0>;
>                              };
>                              vin0csi40: endpoint@2 {
>                                      reg = <2>;
> -                                    remote-endpoint= <&csi40vin0>;
> +                                    remote-endpoint = <&csi40vin0>;
>                              };
>                      };
>              };
> diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> index f8c976898a95..18f6733408b4 100644
> --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> @@ -164,7 +164,7 @@ examples:
>              reg = <0 0xf80000>;
>          };
>          firmware@f80000 {
> -            label ="firmware";
> +            label = "firmware";
>              reg = <0xf80000 0x80000>;
>              read-only;
>          };
> diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> index 0fa2132fa4f4..400aedb58205 100644
> --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> @@ -156,7 +156,7 @@ examples:
>          reg = <0x1101c000 0x1300>;
>          interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
>          interrupt-names = "macirq";
> -        phy-mode ="rgmii-rxid";
> +        phy-mode = "rgmii-rxid";
>          mac-address = [00 55 7b b5 7d f7];
>          clock-names = "axi",
>                        "apb",
> diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> index 50f46a6898b1..4adab0149108 100644
> --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> @@ -42,8 +42,8 @@ examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>      pmu {
> -        #address-cells=<2>;
> -        #size-cells=<2>;
> +        #address-cells = <2>;
> +        #size-cells = <2>;
>  
>          pmu@ff638000 {
>              compatible = "amlogic,g12a-ddr-pmu";
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> index 26f2b887cfc1..b8d77165c4a1 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> @@ -83,7 +83,7 @@ examples:
>          clocks = <&clk26m>;
>          clock-output-names = "mipi_tx0_pll";
>          drive-strength-microamp = <4000>;
> -        nvmem-cells= <&mipi_tx_calibration>;
> +        nvmem-cells = <&mipi_tx_calibration>;
>          nvmem-cell-names = "calibration-data";
>          #clock-cells = <0>;
>          #phy-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 3100cb870170..76e8ca44906a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -75,7 +75,7 @@ additionalProperties: false
>  examples:
>    - |
>      remoteproc@1c {
> -      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
> +      compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
>        reg = <0x1c 0x8>, <0x38 0x8>;
>        reg-names = "remap", "cpu";
>        resets = <&media_cpu_reset>;
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> index 478214ab045e..a59d91243ac8 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> @@ -304,7 +304,7 @@ examples:
>    # Dual role switch with type-c
>    - |
>      usb@11201000 {
> -        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
> +        compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
>          reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
>          reg-names = "mac", "ippc";
>          interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> index d25fc708e32c..fec5651f5602 100644
> --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> @@ -92,7 +92,7 @@ examples:
>  
>          usb@31100000 {
>            compatible = "snps,dwc3";
> -          reg =<0x00 0x31100000 0x00 0x50000>;
> +          reg = <0x00 0x31100000 0x00 0x50000>;
>            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
>                         <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
>            interrupt-names = "host", "peripheral";
Neil Armstrong July 3, 2023, 1:25 p.m. UTC | #3
On 02/07/2023 20:23, Krzysztof Kozlowski wrote:
> The DTS code coding style expects spaces around '=' sign.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Rob,
> 
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>   .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>   .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>   .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
>   .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>   .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>   .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>   .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>   .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>   .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>   .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>   .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>   .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
>   .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-

For amlogic ones:

Acked-by: Neil Armstrong <neil.armstrong@linaro.org>


>   .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>   .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
>   15 files changed, 30 insertions(+), 30 deletions(-)
> 

<snip>
Mathieu Poirier July 3, 2023, 4:04 p.m. UTC | #4
On Sun, Jul 02, 2023 at 08:23:08PM +0200, Krzysztof Kozlowski wrote:
> The DTS code coding style expects spaces around '=' sign.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Rob,
> 
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>  .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>  .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>  .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
>  .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>  .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>  .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>  .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>  .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>  .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>  .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>  .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>  .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
>  .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-
>  .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>  .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
>  15 files changed, 30 insertions(+), 30 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> index 0c5b875cb654..d6c84b6e7fe6 100644
> --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> @@ -287,7 +287,7 @@ examples:
>              arm,trig-in-sigs = <0 1>;
>              arm,trig-in-types = <PE_DBGTRIGGER
>                                   PE_PMUIRQ>;
> -            arm,trig-out-sigs=<0 1 2 >;
> +            arm,trig-out-sigs = <0 1 2 >;
>              arm,trig-out-types = <PE_EDBGREQ
>                                    PE_DBGRESTART
>                                    PE_CTIIRQ>;
> @@ -309,24 +309,24 @@ examples:
>  
>        trig-conns@0 {
>          reg = <0>;
> -        arm,trig-in-sigs=<0>;
> -        arm,trig-in-types=<GEN_INTREQ>;
> -        arm,trig-out-sigs=<0>;
> -        arm,trig-out-types=<GEN_HALTREQ>;
> +        arm,trig-in-sigs = <0>;
> +        arm,trig-in-types = <GEN_INTREQ>;
> +        arm,trig-out-sigs = <0>;
> +        arm,trig-out-types = <GEN_HALTREQ>;
>          arm,trig-conn-name = "sys_profiler";
>        };
>  
>        trig-conns@1 {
>          reg = <1>;
> -        arm,trig-out-sigs=<2 3>;
> -        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-out-sigs = <2 3>;
> +        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>          arm,trig-conn-name = "watchdog";
>        };
>  
>        trig-conns@2 {
>          reg = <2>;
> -        arm,trig-in-sigs=<1 6>;
> -        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-in-sigs = <1 6>;
> +        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>          arm,trig-conn-name = "g_counter";
>        };
>      };
> diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> index 91b96065f7df..86b59de7707e 100644
> --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> @@ -96,8 +96,8 @@ examples:
>        compatible = "ti,k2g-sci";
>        ti,system-reboot-controller;
>        mbox-names = "rx", "tx";
> -      mboxes= <&msgmgr 5 2>,
> -              <&msgmgr 0 0>;
> +      mboxes = <&msgmgr 5 2>,
> +               <&msgmgr 0 0>;
>        reg-names = "debug_messages";
>        reg = <0x02921800 0x800>;
>      };
> @@ -107,8 +107,8 @@ examples:
>        compatible = "ti,k2g-sci";
>        ti,host-id = <12>;
>        mbox-names = "rx", "tx";
> -      mboxes= <&secure_proxy_main 11>,
> -              <&secure_proxy_main 13>;
> +      mboxes = <&secure_proxy_main 11>,
> +               <&secure_proxy_main 13>;
>        reg-names = "debug_messages";
>        reg = <0x44083000 0x1000>;
>  
> diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> index 029d72822d8b..65b02c7a1211 100644
> --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> @@ -225,7 +225,7 @@ examples:
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>  
>      gmu: gmu@506a000 {
> -        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
> +        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
>  
>          reg = <0x506a000 0x30000>,
>                <0xb280000 0x10000>,
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> index 1cdc91b3439f..200fbf1c74a0 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> @@ -74,7 +74,7 @@ examples:
>              vdd3-supply = <&vcclcd_reg>;
>              vci-supply = <&vlcd_reg>;
>              reset-gpios = <&gpy4 5 0>;
> -            power-on-delay= <50>;
> +            power-on-delay = <50>;
>              reset-delay = <100>;
>              init-delay = <100>;
>              panel-width-mm = <58>;
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> index 6f43d885c9b3..df61cb5f5c54 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> @@ -121,11 +121,11 @@ examples:
>          #size-cells = <0>;
>          vopb_out_edp: endpoint@0 {
>            reg = <0>;
> -          remote-endpoint=<&edp_in_vopb>;
> +          remote-endpoint = <&edp_in_vopb>;
>          };
>          vopb_out_hdmi: endpoint@1 {
>            reg = <1>;
> -          remote-endpoint=<&hdmi_in_vopb>;
> +          remote-endpoint = <&hdmi_in_vopb>;
>          };
>        };
>      };
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> index 9b072b057f16..a60b1e100ee4 100644
> --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> @@ -35,7 +35,7 @@ unevaluatedProperties: false
>  examples:
>    - |
>      spi {
> -        #address-cells= <1>;
> +        #address-cells = <1>;
>          #size-cells = <0>;
>  
>          adc@0 {
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> index 7dde7967c886..1e72b8808d24 100644
> --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -137,7 +137,7 @@ examples:
>  
>                  cru_parallel_in: endpoint@0 {
>                      reg = <0>;
> -                    remote-endpoint= <&ov5642>;
> +                    remote-endpoint = <&ov5642>;
>                      hsync-active = <1>;
>                      vsync-active = <1>;
>                  };
> @@ -150,7 +150,7 @@ examples:
>  
>                  cru_csi_in: endpoint@0 {
>                      reg = <0>;
> -                    remote-endpoint= <&csi_cru_in>;
> +                    remote-endpoint = <&csi_cru_in>;
>                  };
>              };
>          };
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> index 91e8f368fb52..324703bfb1bd 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> @@ -303,11 +303,11 @@ examples:
>  
>                              vin0csi20: endpoint@0 {
>                                      reg = <0>;
> -                                    remote-endpoint= <&csi20vin0>;
> +                                    remote-endpoint = <&csi20vin0>;
>                              };
>                              vin0csi40: endpoint@2 {
>                                      reg = <2>;
> -                                    remote-endpoint= <&csi40vin0>;
> +                                    remote-endpoint = <&csi40vin0>;
>                              };
>                      };
>              };
> diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> index f8c976898a95..18f6733408b4 100644
> --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> @@ -164,7 +164,7 @@ examples:
>              reg = <0 0xf80000>;
>          };
>          firmware@f80000 {
> -            label ="firmware";
> +            label = "firmware";
>              reg = <0xf80000 0x80000>;
>              read-only;
>          };
> diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> index 0fa2132fa4f4..400aedb58205 100644
> --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> @@ -156,7 +156,7 @@ examples:
>          reg = <0x1101c000 0x1300>;
>          interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
>          interrupt-names = "macirq";
> -        phy-mode ="rgmii-rxid";
> +        phy-mode = "rgmii-rxid";
>          mac-address = [00 55 7b b5 7d f7];
>          clock-names = "axi",
>                        "apb",
> diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> index 50f46a6898b1..4adab0149108 100644
> --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> @@ -42,8 +42,8 @@ examples:
>    - |
>      #include <dt-bindings/interrupt-controller/arm-gic.h>
>      pmu {
> -        #address-cells=<2>;
> -        #size-cells=<2>;
> +        #address-cells = <2>;
> +        #size-cells = <2>;
>  
>          pmu@ff638000 {
>              compatible = "amlogic,g12a-ddr-pmu";
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> index 26f2b887cfc1..b8d77165c4a1 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> @@ -83,7 +83,7 @@ examples:
>          clocks = <&clk26m>;
>          clock-output-names = "mipi_tx0_pll";
>          drive-strength-microamp = <4000>;
> -        nvmem-cells= <&mipi_tx_calibration>;
> +        nvmem-cells = <&mipi_tx_calibration>;
>          nvmem-cell-names = "calibration-data";
>          #clock-cells = <0>;
>          #phy-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 3100cb870170..76e8ca44906a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -75,7 +75,7 @@ additionalProperties: false
>  examples:
>    - |
>      remoteproc@1c {
> -      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
> +      compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";

Reviewed-by: Mathieu Poirier <mathieu.poirier@linaro.org>

>        reg = <0x1c 0x8>, <0x38 0x8>;
>        reg-names = "remap", "cpu";
>        resets = <&media_cpu_reset>;
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> index 478214ab045e..a59d91243ac8 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> @@ -304,7 +304,7 @@ examples:
>    # Dual role switch with type-c
>    - |
>      usb@11201000 {
> -        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
> +        compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
>          reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
>          reg-names = "mac", "ippc";
>          interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> index d25fc708e32c..fec5651f5602 100644
> --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> @@ -92,7 +92,7 @@ examples:
>  
>          usb@31100000 {
>            compatible = "snps,dwc3";
> -          reg =<0x00 0x31100000 0x00 0x50000>;
> +          reg = <0x00 0x31100000 0x00 0x50000>;
>            interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
>                         <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
>            interrupt-names = "host", "peripheral";
> -- 
> 2.34.1
>
Conor Dooley July 3, 2023, 4:37 p.m. UTC | #5
On Sun, Jul 02, 2023 at 08:23:08PM +0200, Krzysztof Kozlowski wrote:
> The DTS code coding style expects spaces around '=' sign.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>

Cheers,
Conor.
Vinod Koul July 4, 2023, 11:22 a.m. UTC | #6
On 02-07-23, 20:23, Krzysztof Kozlowski wrote:
> The DTS code coding style expects spaces around '=' sign.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Rob,
> 
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>  .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>  .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>  .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
>  .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>  .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>  .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>  .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>  .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>  .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>  .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>  .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>  .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-

Acked-by: Vinod Koul <vkoul@kernel.org>
Matthias Brugger July 4, 2023, 12:58 p.m. UTC | #7
On 02/07/2023 20:23, Krzysztof Kozlowski wrote:
> The DTS code coding style expects spaces around '=' sign.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Rob,
> 
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
[...]
>   .../bindings/net/mediatek-dwmac.yaml           |  2 +-
[...]
>   .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
[...]
>   .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>   .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-

For MediaTek parts:
Reviewed-by: Matthias Brugger <matthias.bgg@gmail.com>

>   15 files changed, 30 insertions(+), 30 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> index 0c5b875cb654..d6c84b6e7fe6 100644
> --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> @@ -287,7 +287,7 @@ examples:
>               arm,trig-in-sigs = <0 1>;
>               arm,trig-in-types = <PE_DBGTRIGGER
>                                    PE_PMUIRQ>;
> -            arm,trig-out-sigs=<0 1 2 >;
> +            arm,trig-out-sigs = <0 1 2 >;
>               arm,trig-out-types = <PE_EDBGREQ
>                                     PE_DBGRESTART
>                                     PE_CTIIRQ>;
> @@ -309,24 +309,24 @@ examples:
>   
>         trig-conns@0 {
>           reg = <0>;
> -        arm,trig-in-sigs=<0>;
> -        arm,trig-in-types=<GEN_INTREQ>;
> -        arm,trig-out-sigs=<0>;
> -        arm,trig-out-types=<GEN_HALTREQ>;
> +        arm,trig-in-sigs = <0>;
> +        arm,trig-in-types = <GEN_INTREQ>;
> +        arm,trig-out-sigs = <0>;
> +        arm,trig-out-types = <GEN_HALTREQ>;
>           arm,trig-conn-name = "sys_profiler";
>         };
>   
>         trig-conns@1 {
>           reg = <1>;
> -        arm,trig-out-sigs=<2 3>;
> -        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-out-sigs = <2 3>;
> +        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>           arm,trig-conn-name = "watchdog";
>         };
>   
>         trig-conns@2 {
>           reg = <2>;
> -        arm,trig-in-sigs=<1 6>;
> -        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
> +        arm,trig-in-sigs = <1 6>;
> +        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
>           arm,trig-conn-name = "g_counter";
>         };
>       };
> diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> index 91b96065f7df..86b59de7707e 100644
> --- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> +++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
> @@ -96,8 +96,8 @@ examples:
>         compatible = "ti,k2g-sci";
>         ti,system-reboot-controller;
>         mbox-names = "rx", "tx";
> -      mboxes= <&msgmgr 5 2>,
> -              <&msgmgr 0 0>;
> +      mboxes = <&msgmgr 5 2>,
> +               <&msgmgr 0 0>;
>         reg-names = "debug_messages";
>         reg = <0x02921800 0x800>;
>       };
> @@ -107,8 +107,8 @@ examples:
>         compatible = "ti,k2g-sci";
>         ti,host-id = <12>;
>         mbox-names = "rx", "tx";
> -      mboxes= <&secure_proxy_main 11>,
> -              <&secure_proxy_main 13>;
> +      mboxes = <&secure_proxy_main 11>,
> +               <&secure_proxy_main 13>;
>         reg-names = "debug_messages";
>         reg = <0x44083000 0x1000>;
>   
> diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> index 029d72822d8b..65b02c7a1211 100644
> --- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
> +++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
> @@ -225,7 +225,7 @@ examples:
>       #include <dt-bindings/interrupt-controller/arm-gic.h>
>   
>       gmu: gmu@506a000 {
> -        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
> +        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
>   
>           reg = <0x506a000 0x30000>,
>                 <0xb280000 0x10000>,
> diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> index 1cdc91b3439f..200fbf1c74a0 100644
> --- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> +++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
> @@ -74,7 +74,7 @@ examples:
>               vdd3-supply = <&vcclcd_reg>;
>               vci-supply = <&vlcd_reg>;
>               reset-gpios = <&gpy4 5 0>;
> -            power-on-delay= <50>;
> +            power-on-delay = <50>;
>               reset-delay = <100>;
>               init-delay = <100>;
>               panel-width-mm = <58>;
> diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> index 6f43d885c9b3..df61cb5f5c54 100644
> --- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> +++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
> @@ -121,11 +121,11 @@ examples:
>           #size-cells = <0>;
>           vopb_out_edp: endpoint@0 {
>             reg = <0>;
> -          remote-endpoint=<&edp_in_vopb>;
> +          remote-endpoint = <&edp_in_vopb>;
>           };
>           vopb_out_hdmi: endpoint@1 {
>             reg = <1>;
> -          remote-endpoint=<&hdmi_in_vopb>;
> +          remote-endpoint = <&hdmi_in_vopb>;
>           };
>         };
>       };
> diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> index 9b072b057f16..a60b1e100ee4 100644
> --- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> +++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
> @@ -35,7 +35,7 @@ unevaluatedProperties: false
>   examples:
>     - |
>       spi {
> -        #address-cells= <1>;
> +        #address-cells = <1>;
>           #size-cells = <0>;
>   
>           adc@0 {
> diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> index 7dde7967c886..1e72b8808d24 100644
> --- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
> @@ -137,7 +137,7 @@ examples:
>   
>                   cru_parallel_in: endpoint@0 {
>                       reg = <0>;
> -                    remote-endpoint= <&ov5642>;
> +                    remote-endpoint = <&ov5642>;
>                       hsync-active = <1>;
>                       vsync-active = <1>;
>                   };
> @@ -150,7 +150,7 @@ examples:
>   
>                   cru_csi_in: endpoint@0 {
>                       reg = <0>;
> -                    remote-endpoint= <&csi_cru_in>;
> +                    remote-endpoint = <&csi_cru_in>;
>                   };
>               };
>           };
> diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> index 91e8f368fb52..324703bfb1bd 100644
> --- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
> +++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
> @@ -303,11 +303,11 @@ examples:
>   
>                               vin0csi20: endpoint@0 {
>                                       reg = <0>;
> -                                    remote-endpoint= <&csi20vin0>;
> +                                    remote-endpoint = <&csi20vin0>;
>                               };
>                               vin0csi40: endpoint@2 {
>                                       reg = <2>;
> -                                    remote-endpoint= <&csi40vin0>;
> +                                    remote-endpoint = <&csi40vin0>;
>                               };
>                       };
>               };
> diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> index f8c976898a95..18f6733408b4 100644
> --- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> +++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
> @@ -164,7 +164,7 @@ examples:
>               reg = <0 0xf80000>;
>           };
>           firmware@f80000 {
> -            label ="firmware";
> +            label = "firmware";
>               reg = <0xf80000 0x80000>;
>               read-only;
>           };
> diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> index 0fa2132fa4f4..400aedb58205 100644
> --- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> +++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
> @@ -156,7 +156,7 @@ examples:
>           reg = <0x1101c000 0x1300>;
>           interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
>           interrupt-names = "macirq";
> -        phy-mode ="rgmii-rxid";
> +        phy-mode = "rgmii-rxid";
>           mac-address = [00 55 7b b5 7d f7];
>           clock-names = "axi",
>                         "apb",
> diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> index 50f46a6898b1..4adab0149108 100644
> --- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> +++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
> @@ -42,8 +42,8 @@ examples:
>     - |
>       #include <dt-bindings/interrupt-controller/arm-gic.h>
>       pmu {
> -        #address-cells=<2>;
> -        #size-cells=<2>;
> +        #address-cells = <2>;
> +        #size-cells = <2>;
>   
>           pmu@ff638000 {
>               compatible = "amlogic,g12a-ddr-pmu";
> diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> index 26f2b887cfc1..b8d77165c4a1 100644
> --- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> +++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
> @@ -83,7 +83,7 @@ examples:
>           clocks = <&clk26m>;
>           clock-output-names = "mipi_tx0_pll";
>           drive-strength-microamp = <4000>;
> -        nvmem-cells= <&mipi_tx_calibration>;
> +        nvmem-cells = <&mipi_tx_calibration>;
>           nvmem-cell-names = "calibration-data";
>           #clock-cells = <0>;
>           #phy-cells = <0>;
> diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> index 3100cb870170..76e8ca44906a 100644
> --- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> +++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
> @@ -75,7 +75,7 @@ additionalProperties: false
>   examples:
>     - |
>       remoteproc@1c {
> -      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
> +      compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
>         reg = <0x1c 0x8>, <0x38 0x8>;
>         reg-names = "remap", "cpu";
>         resets = <&media_cpu_reset>;
> diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> index 478214ab045e..a59d91243ac8 100644
> --- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> +++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
> @@ -304,7 +304,7 @@ examples:
>     # Dual role switch with type-c
>     - |
>       usb@11201000 {
> -        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
> +        compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
>           reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
>           reg-names = "mac", "ippc";
>           interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
> diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> index d25fc708e32c..fec5651f5602 100644
> --- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> +++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
> @@ -92,7 +92,7 @@ examples:
>   
>           usb@31100000 {
>             compatible = "snps,dwc3";
> -          reg =<0x00 0x31100000 0x00 0x50000>;
> +          reg = <0x00 0x31100000 0x00 0x50000>;
>             interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
>                          <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
>             interrupt-names = "host", "peripheral";
Dmitry Baryshkov July 4, 2023, 1:45 p.m. UTC | #8
On Sun, 2 Jul 2023 at 21:23, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> The DTS code coding style expects spaces around '=' sign.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Rob,
>
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>  .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>  .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>  .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-

Acked-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #display/msm

>  .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>  .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>  .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>  .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>  .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>  .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>  .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>  .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>  .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
>  .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-
>  .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>  .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
>  15 files changed, 30 insertions(+), 30 deletions(-)
Jonas Gorski July 4, 2023, 2:42 p.m. UTC | #9
On Sun, 2 Jul 2023 at 20:24, Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> The DTS code coding style expects spaces around '=' sign.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
>
> ---
>
> Rob,
>
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>  .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>  .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>  .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
>  .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>  .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>  .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>  .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>  .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>  .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>  .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>  .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>  .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
>  .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-
>  .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>  .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
>  15 files changed, 30 insertions(+), 30 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> index 0c5b875cb654..d6c84b6e7fe6 100644
> --- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> +++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
> @@ -287,7 +287,7 @@ examples:
>              arm,trig-in-sigs = <0 1>;
>              arm,trig-in-types = <PE_DBGTRIGGER
>                                   PE_PMUIRQ>;
> -            arm,trig-out-sigs=<0 1 2 >;
> +            arm,trig-out-sigs = <0 1 2 >;

There's a space before the closing > you could drop as well.

Best Regards,
Jonas
Rob Herring (Arm) July 5, 2023, 3:53 p.m. UTC | #10
On Sun, 02 Jul 2023 20:23:08 +0200, Krzysztof Kozlowski wrote:
> The DTS code coding style expects spaces around '=' sign.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> 
> ---
> 
> Rob,
> 
> Maybe this could go via your tree? Rebased on your for-next:
> v6.4-rc2-45-gf0ac35049606
> ---
>  .../bindings/arm/arm,coresight-cti.yaml        | 18 +++++++++---------
>  .../bindings/arm/keystone/ti,sci.yaml          |  8 ++++----
>  .../devicetree/bindings/display/msm/gmu.yaml   |  2 +-
>  .../display/panel/samsung,s6e8aa0.yaml         |  2 +-
>  .../display/rockchip/rockchip-vop.yaml         |  4 ++--
>  .../bindings/iio/adc/ti,adc108s102.yaml        |  2 +-
>  .../bindings/media/renesas,rzg2l-cru.yaml      |  4 ++--
>  .../devicetree/bindings/media/renesas,vin.yaml |  4 ++--
>  .../devicetree/bindings/mtd/mtd-physmap.yaml   |  2 +-
>  .../bindings/net/mediatek-dwmac.yaml           |  2 +-
>  .../bindings/perf/amlogic,g12-ddr-pmu.yaml     |  4 ++--
>  .../bindings/phy/mediatek,dsi-phy.yaml         |  2 +-
>  .../remoteproc/amlogic,meson-mx-ao-arc.yaml    |  2 +-
>  .../devicetree/bindings/usb/mediatek,mtu3.yaml |  2 +-
>  .../devicetree/bindings/usb/ti,am62-usb.yaml   |  2 +-
>  15 files changed, 30 insertions(+), 30 deletions(-)
> 

Applied, thanks!
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
index 0c5b875cb654..d6c84b6e7fe6 100644
--- a/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
+++ b/Documentation/devicetree/bindings/arm/arm,coresight-cti.yaml
@@ -287,7 +287,7 @@  examples:
             arm,trig-in-sigs = <0 1>;
             arm,trig-in-types = <PE_DBGTRIGGER
                                  PE_PMUIRQ>;
-            arm,trig-out-sigs=<0 1 2 >;
+            arm,trig-out-sigs = <0 1 2 >;
             arm,trig-out-types = <PE_EDBGREQ
                                   PE_DBGRESTART
                                   PE_CTIIRQ>;
@@ -309,24 +309,24 @@  examples:
 
       trig-conns@0 {
         reg = <0>;
-        arm,trig-in-sigs=<0>;
-        arm,trig-in-types=<GEN_INTREQ>;
-        arm,trig-out-sigs=<0>;
-        arm,trig-out-types=<GEN_HALTREQ>;
+        arm,trig-in-sigs = <0>;
+        arm,trig-in-types = <GEN_INTREQ>;
+        arm,trig-out-sigs = <0>;
+        arm,trig-out-types = <GEN_HALTREQ>;
         arm,trig-conn-name = "sys_profiler";
       };
 
       trig-conns@1 {
         reg = <1>;
-        arm,trig-out-sigs=<2 3>;
-        arm,trig-out-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-out-sigs = <2 3>;
+        arm,trig-out-types = <GEN_HALTREQ GEN_RESTARTREQ>;
         arm,trig-conn-name = "watchdog";
       };
 
       trig-conns@2 {
         reg = <2>;
-        arm,trig-in-sigs=<1 6>;
-        arm,trig-in-types=<GEN_HALTREQ GEN_RESTARTREQ>;
+        arm,trig-in-sigs = <1 6>;
+        arm,trig-in-types = <GEN_HALTREQ GEN_RESTARTREQ>;
         arm,trig-conn-name = "g_counter";
       };
     };
diff --git a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
index 91b96065f7df..86b59de7707e 100644
--- a/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
+++ b/Documentation/devicetree/bindings/arm/keystone/ti,sci.yaml
@@ -96,8 +96,8 @@  examples:
       compatible = "ti,k2g-sci";
       ti,system-reboot-controller;
       mbox-names = "rx", "tx";
-      mboxes= <&msgmgr 5 2>,
-              <&msgmgr 0 0>;
+      mboxes = <&msgmgr 5 2>,
+               <&msgmgr 0 0>;
       reg-names = "debug_messages";
       reg = <0x02921800 0x800>;
     };
@@ -107,8 +107,8 @@  examples:
       compatible = "ti,k2g-sci";
       ti,host-id = <12>;
       mbox-names = "rx", "tx";
-      mboxes= <&secure_proxy_main 11>,
-              <&secure_proxy_main 13>;
+      mboxes = <&secure_proxy_main 11>,
+               <&secure_proxy_main 13>;
       reg-names = "debug_messages";
       reg = <0x44083000 0x1000>;
 
diff --git a/Documentation/devicetree/bindings/display/msm/gmu.yaml b/Documentation/devicetree/bindings/display/msm/gmu.yaml
index 029d72822d8b..65b02c7a1211 100644
--- a/Documentation/devicetree/bindings/display/msm/gmu.yaml
+++ b/Documentation/devicetree/bindings/display/msm/gmu.yaml
@@ -225,7 +225,7 @@  examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     gmu: gmu@506a000 {
-        compatible="qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
+        compatible = "qcom,adreno-gmu-630.2", "qcom,adreno-gmu";
 
         reg = <0x506a000 0x30000>,
               <0xb280000 0x10000>,
diff --git a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
index 1cdc91b3439f..200fbf1c74a0 100644
--- a/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
+++ b/Documentation/devicetree/bindings/display/panel/samsung,s6e8aa0.yaml
@@ -74,7 +74,7 @@  examples:
             vdd3-supply = <&vcclcd_reg>;
             vci-supply = <&vlcd_reg>;
             reset-gpios = <&gpy4 5 0>;
-            power-on-delay= <50>;
+            power-on-delay = <50>;
             reset-delay = <100>;
             init-delay = <100>;
             panel-width-mm = <58>;
diff --git a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
index 6f43d885c9b3..df61cb5f5c54 100644
--- a/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
+++ b/Documentation/devicetree/bindings/display/rockchip/rockchip-vop.yaml
@@ -121,11 +121,11 @@  examples:
         #size-cells = <0>;
         vopb_out_edp: endpoint@0 {
           reg = <0>;
-          remote-endpoint=<&edp_in_vopb>;
+          remote-endpoint = <&edp_in_vopb>;
         };
         vopb_out_hdmi: endpoint@1 {
           reg = <1>;
-          remote-endpoint=<&hdmi_in_vopb>;
+          remote-endpoint = <&hdmi_in_vopb>;
         };
       };
     };
diff --git a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
index 9b072b057f16..a60b1e100ee4 100644
--- a/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
+++ b/Documentation/devicetree/bindings/iio/adc/ti,adc108s102.yaml
@@ -35,7 +35,7 @@  unevaluatedProperties: false
 examples:
   - |
     spi {
-        #address-cells= <1>;
+        #address-cells = <1>;
         #size-cells = <0>;
 
         adc@0 {
diff --git a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
index 7dde7967c886..1e72b8808d24 100644
--- a/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,rzg2l-cru.yaml
@@ -137,7 +137,7 @@  examples:
 
                 cru_parallel_in: endpoint@0 {
                     reg = <0>;
-                    remote-endpoint= <&ov5642>;
+                    remote-endpoint = <&ov5642>;
                     hsync-active = <1>;
                     vsync-active = <1>;
                 };
@@ -150,7 +150,7 @@  examples:
 
                 cru_csi_in: endpoint@0 {
                     reg = <0>;
-                    remote-endpoint= <&csi_cru_in>;
+                    remote-endpoint = <&csi_cru_in>;
                 };
             };
         };
diff --git a/Documentation/devicetree/bindings/media/renesas,vin.yaml b/Documentation/devicetree/bindings/media/renesas,vin.yaml
index 91e8f368fb52..324703bfb1bd 100644
--- a/Documentation/devicetree/bindings/media/renesas,vin.yaml
+++ b/Documentation/devicetree/bindings/media/renesas,vin.yaml
@@ -303,11 +303,11 @@  examples:
 
                             vin0csi20: endpoint@0 {
                                     reg = <0>;
-                                    remote-endpoint= <&csi20vin0>;
+                                    remote-endpoint = <&csi20vin0>;
                             };
                             vin0csi40: endpoint@2 {
                                     reg = <2>;
-                                    remote-endpoint= <&csi40vin0>;
+                                    remote-endpoint = <&csi40vin0>;
                             };
                     };
             };
diff --git a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
index f8c976898a95..18f6733408b4 100644
--- a/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
+++ b/Documentation/devicetree/bindings/mtd/mtd-physmap.yaml
@@ -164,7 +164,7 @@  examples:
             reg = <0 0xf80000>;
         };
         firmware@f80000 {
-            label ="firmware";
+            label = "firmware";
             reg = <0xf80000 0x80000>;
             read-only;
         };
diff --git a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
index 0fa2132fa4f4..400aedb58205 100644
--- a/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/mediatek-dwmac.yaml
@@ -156,7 +156,7 @@  examples:
         reg = <0x1101c000 0x1300>;
         interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_LOW>;
         interrupt-names = "macirq";
-        phy-mode ="rgmii-rxid";
+        phy-mode = "rgmii-rxid";
         mac-address = [00 55 7b b5 7d f7];
         clock-names = "axi",
                       "apb",
diff --git a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
index 50f46a6898b1..4adab0149108 100644
--- a/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
+++ b/Documentation/devicetree/bindings/perf/amlogic,g12-ddr-pmu.yaml
@@ -42,8 +42,8 @@  examples:
   - |
     #include <dt-bindings/interrupt-controller/arm-gic.h>
     pmu {
-        #address-cells=<2>;
-        #size-cells=<2>;
+        #address-cells = <2>;
+        #size-cells = <2>;
 
         pmu@ff638000 {
             compatible = "amlogic,g12a-ddr-pmu";
diff --git a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
index 26f2b887cfc1..b8d77165c4a1 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,dsi-phy.yaml
@@ -83,7 +83,7 @@  examples:
         clocks = <&clk26m>;
         clock-output-names = "mipi_tx0_pll";
         drive-strength-microamp = <4000>;
-        nvmem-cells= <&mipi_tx_calibration>;
+        nvmem-cells = <&mipi_tx_calibration>;
         nvmem-cell-names = "calibration-data";
         #clock-cells = <0>;
         #phy-cells = <0>;
diff --git a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
index 3100cb870170..76e8ca44906a 100644
--- a/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
+++ b/Documentation/devicetree/bindings/remoteproc/amlogic,meson-mx-ao-arc.yaml
@@ -75,7 +75,7 @@  additionalProperties: false
 examples:
   - |
     remoteproc@1c {
-      compatible= "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
+      compatible = "amlogic,meson8-ao-arc", "amlogic,meson-mx-ao-arc";
       reg = <0x1c 0x8>, <0x38 0x8>;
       reg-names = "remap", "cpu";
       resets = <&media_cpu_reset>;
diff --git a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
index 478214ab045e..a59d91243ac8 100644
--- a/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
+++ b/Documentation/devicetree/bindings/usb/mediatek,mtu3.yaml
@@ -304,7 +304,7 @@  examples:
   # Dual role switch with type-c
   - |
     usb@11201000 {
-        compatible ="mediatek,mt8183-mtu3", "mediatek,mtu3";
+        compatible = "mediatek,mt8183-mtu3", "mediatek,mtu3";
         reg = <0x11201000 0x2e00>, <0x11203e00 0x0100>;
         reg-names = "mac", "ippc";
         interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_LOW>;
diff --git a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
index d25fc708e32c..fec5651f5602 100644
--- a/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
+++ b/Documentation/devicetree/bindings/usb/ti,am62-usb.yaml
@@ -92,7 +92,7 @@  examples:
 
         usb@31100000 {
           compatible = "snps,dwc3";
-          reg =<0x00 0x31100000 0x00 0x50000>;
+          reg = <0x00 0x31100000 0x00 0x50000>;
           interrupts = <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>, /* irq.0 */
                        <GIC_SPI 226 IRQ_TYPE_LEVEL_HIGH>; /* irq.0 */
           interrupt-names = "host", "peripheral";