@@ -58,6 +58,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-mezzanine.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-roc-pc-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4c-plus.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-4se.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4a-plus.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3399-rock-pi-4b.dtb
new file mode 100644
@@ -0,0 +1,65 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 Akash Gajjar <Akash_Gajjar@mentor.com>
+ * Copyright (c) 2019 Pragnesh Patel <Pragnesh_Patel@mentor.com>
+ */
+
+/dts-v1/;
+#include "rk3399-rock-pi-4.dtsi"
+#include "rk3399-t-opp.dtsi"
+
+/ {
+ model = "Radxa ROCK 4SE";
+ compatible = "radxa,rock-4se", "rockchip,rk3399";
+
+ aliases {
+ mmc2 = &sdio0;
+ };
+};
+
+&pinctrl {
+ usb2 {
+ vcc5v0_host_en: vcc5v0-host-en {
+ rockchip,pins = <4 RK_PD1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+};
+
+&sdio0 {
+ status = "okay";
+
+ brcmf: wifi@1 {
+ compatible = "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA3 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_host_wake_l>;
+ };
+};
+
+&uart0 {
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&rk808 1>;
+ clock-names = "lpo";
+ device-wakeup-gpios = <&gpio2 RK_PD3 GPIO_ACTIVE_HIGH>;
+ host-wakeup-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio0 RK_PB1 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_host_wake_l &bt_wake_l &bt_enable_h>;
+ vbat-supply = <&vcc3v3_sys>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&vcc5v0_host {
+ enable-active-high;
+ gpio = <&gpio4 RK_PD1 GPIO_ACTIVE_HIGH>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&vcc5v0_host_en>;
+};
Add board-specific devicetree file for the RK3399T-based Radxa ROCK 4SE board. This board offers similar peripherals in a similar form-factor to the existing ROCK Pi 4B but uses the cost-optimised RK3399T processor (which has different OPP table than the RK3399) and other minimal hardware changes. Signed-off-by: Christopher Obbard <chris.obbard@collabora.com> --- Changes in v2: - Set proper interrupt type for brcmf. arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3399-rock-4se.dts | 65 +++++++++++++++++++ 2 files changed, 66 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3399-rock-4se.dts