diff mbox series

[v1,2/2] arm64: dts: rockchip: rk3588: add PCIe3 support

Message ID 20230714175331.112923-3-sebastian.reichel@collabora.com (mailing list archive)
State New, archived
Headers show
Series RK3588 PCIe3 support | expand

Commit Message

Sebastian Reichel July 14, 2023, 5:53 p.m. UTC 
Add both PCIe3 controllers together with the shared PHY.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 arch/arm64/boot/dts/rockchip/rk3588.dtsi | 128 +++++++++++++++++++++++
 1 file changed, 128 insertions(+)

Comments

Serge Semin July 15, 2023, 4:45 p.m. UTC | #1 
On Fri, Jul 14, 2023 at 07:53:31PM +0200, Sebastian Reichel wrote:
> Add both PCIe3 controllers together with the shared PHY.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  arch/arm64/boot/dts/rockchip/rk3588.dtsi | 128 +++++++++++++++++++++++
>  1 file changed, 128 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
> index 4d66ca6c2e4c..af6f52afbaff 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
> @@ -7,6 +7,11 @@
>  #include "rk3588-pinctrl.dtsi"
>  
>  / {
> +	pcie30_phy_grf: syscon@fd5b8000 {
> +		compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
> +		reg = <0x0 0xfd5b8000 0x0 0x10000>;
> +	};
> +
>  	pipe_phy1_grf: syscon@fd5c0000 {
>  		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
>  		reg = <0x0 0xfd5c0000 0x0 0x100>;
> @@ -80,6 +85,116 @@ i2s10_8ch: i2s@fde00000 {
>  		status = "disabled";
>  	};
>  
> +	pcie3x4: pcie@fe150000 {
> +		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		bus-range = <0x00 0x0f>;
> +		clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
> +			 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
> +			 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
> +		clock-names = "aclk_mst", "aclk_slv",
> +			      "aclk_dbi", "pclk",
> +			      "aux", "pipe";
> +		device_type = "pci";
> +		interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
> +		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
> +		#interrupt-cells = <1>;
> +		interrupt-map-mask = <0 0 0 7>;
> +		interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
> +				<0 0 0 2 &pcie3x4_intc 1>,
> +				<0 0 0 3 &pcie3x4_intc 2>,
> +				<0 0 0 4 &pcie3x4_intc 3>;
> +		linux,pci-domain = <0>;

> +		num-ib-windows = <16>;
> +		num-ob-windows = <16>;
> +		num-viewport = <8>;

These are marked as deprecated in the bindings and unused by the
driver anyway. The DW PCIe core driver auto-detects a number of
available iATU memory windows. So you can freely drop these
properties.

> +		max-link-speed = <3>;
> +		msi-map = <0x0000 &its1 0x0000 0x1000>;
> +		num-lanes = <4>;
> +		phys = <&pcie30phy>;
> +		phy-names = "pcie-phy";
> +		power-domains = <&power RK3588_PD_PCIE>;
> +		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
> +			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
> +			 <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
> +		reg = <0xa 0x40000000 0x0 0x00400000>,
> +		      <0x0 0xfe150000 0x0 0x00010000>,
> +		      <0x0 0xf0000000 0x0 0x00100000>;
> +		reg-names = "dbi", "apb", "config";
> +		resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
> +		reset-names = "pwr", "pipe";
> +		rockchip,pipe-grf = <&php_grf>;
> +		status = "disabled";
> +
> +		pcie3x4_intc: legacy-interrupt-controller {
> +			interrupt-controller;
> +			#address-cells = <0>;
> +			#interrupt-cells = <1>;
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
> +		};
> +	};
> +
> +	pcie3x2: pcie@fe160000 {
> +		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
> +		#address-cells = <3>;
> +		#size-cells = <2>;
> +		bus-range = <0x10 0x1f>;
> +		clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
> +			 <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
> +			 <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
> +		clock-names = "aclk_mst", "aclk_slv",
> +			      "aclk_dbi", "pclk",
> +			      "aux", "pipe";
> +		device_type = "pci";
> +		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
> +			     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
> +		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
> +		#interrupt-cells = <1>;
> +		interrupt-map-mask = <0 0 0 7>;
> +		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
> +				<0 0 0 2 &pcie3x2_intc 1>,
> +				<0 0 0 3 &pcie3x2_intc 2>,
> +				<0 0 0 4 &pcie3x2_intc 3>;
> +		linux,pci-domain = <1>;

> +		num-ib-windows = <16>;
> +		num-ob-windows = <16>;
> +		num-viewport = <8>;

ditto

-Serge(y)

> +		max-link-speed = <3>;
> +		msi-map = <0x1000 &its1 0x1000 0x1000>;
> +		num-lanes = <2>;
> +		phys = <&pcie30phy>;
> +		phy-names = "pcie-phy";
> +		power-domains = <&power RK3588_PD_PCIE>;
> +		ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
> +			 <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
> +			 <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
> +		reg = <0xa 0x40400000 0x0 0x00400000>,
> +		      <0x0 0xfe160000 0x0 0x00010000>,
> +		      <0x0 0xf1000000 0x0 0x00100000>;
> +		reg-names = "dbi", "apb", "config";
> +		resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
> +		reset-names = "pwr", "pipe";
> +		rockchip,pipe-grf = <&php_grf>;
> +		status = "disabled";
> +
> +		pcie3x2_intc: legacy-interrupt-controller {
> +			interrupt-controller;
> +			#address-cells = <0>;
> +			#interrupt-cells = <1>;
> +			interrupt-parent = <&gic>;
> +			interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
> +		};
> +	};
> +
>  	pcie2x1l0: pcie@fe170000 {
>  		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
>  		#address-cells = <3>;
> @@ -221,4 +336,17 @@ combphy1_ps: phy@fee10000 {
>  		rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
>  		status = "disabled";
>  	};
> +
> +	pcie30phy: phy@fee80000 {
> +		compatible = "rockchip,rk3588-pcie3-phy";
> +		reg = <0x0 0xfee80000 0x0 0x20000>;
> +		#phy-cells = <0>;
> +		clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
> +		clock-names = "pclk";
> +		resets = <&cru SRST_PCIE30_PHY>;
> +		reset-names = "phy";
> +		rockchip,pipe-grf = <&php_grf>;
> +		rockchip,phy-grf = <&pcie30_phy_grf>;
> +		status = "disabled";
> +	};
>  };
> -- 
> 2.40.1
>
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588.dtsi b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
index 4d66ca6c2e4c..af6f52afbaff 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588.dtsi
@@ -7,6 +7,11 @@ 
 #include "rk3588-pinctrl.dtsi"
 
 / {
+	pcie30_phy_grf: syscon@fd5b8000 {
+		compatible = "rockchip,rk3588-pcie3-phy-grf", "syscon";
+		reg = <0x0 0xfd5b8000 0x0 0x10000>;
+	};
+
 	pipe_phy1_grf: syscon@fd5c0000 {
 		compatible = "rockchip,rk3588-pipe-phy-grf", "syscon";
 		reg = <0x0 0xfd5c0000 0x0 0x100>;
@@ -80,6 +85,116 @@  i2s10_8ch: i2s@fde00000 {
 		status = "disabled";
 	};
 
+	pcie3x4: pcie@fe150000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x00 0x0f>;
+		clocks = <&cru ACLK_PCIE_4L_MSTR>, <&cru ACLK_PCIE_4L_SLV>,
+			 <&cru ACLK_PCIE_4L_DBI>, <&cru PCLK_PCIE_4L>,
+			 <&cru CLK_PCIE_AUX0>, <&cru CLK_PCIE4L_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x4_intc 0>,
+				<0 0 0 2 &pcie3x4_intc 1>,
+				<0 0 0 3 &pcie3x4_intc 2>,
+				<0 0 0 4 &pcie3x4_intc 3>;
+		linux,pci-domain = <0>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		num-viewport = <8>;
+		max-link-speed = <3>;
+		msi-map = <0x0000 &its1 0x0000 0x1000>;
+		num-lanes = <4>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf0100000 0x0 0xf0100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf0200000 0x0 0xf0200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x00000000 0x0 0x40000000>;
+		reg = <0xa 0x40000000 0x0 0x00400000>,
+		      <0x0 0xfe150000 0x0 0x00010000>,
+		      <0x0 0xf0000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE0_POWER_UP>, <&cru SRST_P_PCIE0>;
+		reset-names = "pwr", "pipe";
+		rockchip,pipe-grf = <&php_grf>;
+		status = "disabled";
+
+		pcie3x4_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 260 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
+	pcie3x2: pcie@fe160000 {
+		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
+		#address-cells = <3>;
+		#size-cells = <2>;
+		bus-range = <0x10 0x1f>;
+		clocks = <&cru ACLK_PCIE_2L_MSTR>, <&cru ACLK_PCIE_2L_SLV>,
+			 <&cru ACLK_PCIE_2L_DBI>, <&cru PCLK_PCIE_2L>,
+			 <&cru CLK_PCIE_AUX1>, <&cru CLK_PCIE2L_PIPE>;
+		clock-names = "aclk_mst", "aclk_slv",
+			      "aclk_dbi", "pclk",
+			      "aux", "pipe";
+		device_type = "pci";
+		interrupts = <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH 0>,
+			     <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH 0>;
+		interrupt-names = "sys", "pmc", "msg", "legacy", "err";
+		#interrupt-cells = <1>;
+		interrupt-map-mask = <0 0 0 7>;
+		interrupt-map = <0 0 0 1 &pcie3x2_intc 0>,
+				<0 0 0 2 &pcie3x2_intc 1>,
+				<0 0 0 3 &pcie3x2_intc 2>,
+				<0 0 0 4 &pcie3x2_intc 3>;
+		linux,pci-domain = <1>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		num-viewport = <8>;
+		max-link-speed = <3>;
+		msi-map = <0x1000 &its1 0x1000 0x1000>;
+		num-lanes = <2>;
+		phys = <&pcie30phy>;
+		phy-names = "pcie-phy";
+		power-domains = <&power RK3588_PD_PCIE>;
+		ranges = <0x01000000 0x0 0xf1100000 0x0 0xf1100000 0x0 0x00100000>,
+			 <0x02000000 0x0 0xf1200000 0x0 0xf1200000 0x0 0x00e00000>,
+			 <0x03000000 0x0 0x40000000 0x9 0x40000000 0x0 0x40000000>;
+		reg = <0xa 0x40400000 0x0 0x00400000>,
+		      <0x0 0xfe160000 0x0 0x00010000>,
+		      <0x0 0xf1000000 0x0 0x00100000>;
+		reg-names = "dbi", "apb", "config";
+		resets = <&cru SRST_PCIE1_POWER_UP>, <&cru SRST_P_PCIE1>;
+		reset-names = "pwr", "pipe";
+		rockchip,pipe-grf = <&php_grf>;
+		status = "disabled";
+
+		pcie3x2_intc: legacy-interrupt-controller {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+			interrupt-parent = <&gic>;
+			interrupts = <GIC_SPI 255 IRQ_TYPE_EDGE_RISING 0>;
+		};
+	};
+
 	pcie2x1l0: pcie@fe170000 {
 		compatible = "rockchip,rk3588-pcie", "rockchip,rk3568-pcie";
 		#address-cells = <3>;
@@ -221,4 +336,17 @@  combphy1_ps: phy@fee10000 {
 		rockchip,pipe-phy-grf = <&pipe_phy1_grf>;
 		status = "disabled";
 	};
+
+	pcie30phy: phy@fee80000 {
+		compatible = "rockchip,rk3588-pcie3-phy";
+		reg = <0x0 0xfee80000 0x0 0x20000>;
+		#phy-cells = <0>;
+		clocks = <&cru PCLK_PCIE_COMBO_PIPE_PHY>;
+		clock-names = "pclk";
+		resets = <&cru SRST_PCIE30_PHY>;
+		reset-names = "phy";
+		rockchip,pipe-grf = <&php_grf>;
+		rockchip,phy-grf = <&pcie30_phy_grf>;
+		status = "disabled";
+	};
 };