diff mbox series

[v2] arm64: dts: rockchip: rock-5a, rock-5b: fix/update sdmmc properties

Message ID 20230722121150.130126-1-naoki@radxa.com (mailing list archive)
State New, archived
Headers show
Series [v2] arm64: dts: rockchip: rock-5a, rock-5b: fix/update sdmmc properties | expand

Commit Message

FUKAUMI Naoki July 22, 2023, 12:11 p.m. UTC
add alias for sdmmc as mmc1.
make card detect work.

Fixes: ea3e66e7ad0d ("arm64: dts: rockchip: add SD card support to rock-5a")
Fixes: 2a6d4af5f157 ("arm64: dts: rockchip: Add SD card support to rock-5b")
Signed-off-by: FUKAUMI Naoki <naoki@radxa.com>
---
Changes in v2:
* drop pinctrl lines (Sebastian Reichel)

 arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts  | 2 ++
 arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts | 2 ++
 2 files changed, 4 insertions(+)

Comments

Heiko Stuebner July 24, 2023, 7:12 p.m. UTC | #1
On Sat, 22 Jul 2023 21:11:50 +0900, FUKAUMI Naoki wrote:
> add alias for sdmmc as mmc1.
> make card detect work.
> 
> 

Applied, thanks!

[1/1] arm64: dts: rockchip: rock-5a, rock-5b: fix/update sdmmc properties
      commit: c75b725ea6dd518beeebd693e4bfc02eb15e3b75

Best regards,
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
index d029a77c9a1e..6b15a650490d 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts
@@ -12,6 +12,7 @@  / {
 
 	aliases {
 		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
 		serial2 = &uart2;
 	};
 
@@ -349,6 +350,7 @@  &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	sd-uhs-sdr104;
 	vmmc-supply = <&vcc_3v3_s3>;
diff --git a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
index c1b42e1f4477..8e1162aadc87 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3588s-rock-5a.dts
@@ -13,6 +13,7 @@  / {
 
 	aliases {
 		mmc0 = &sdhci;
+		mmc1 = &sdmmc;
 		serial2 = &uart2;
 	};
 
@@ -359,6 +360,7 @@  &sdmmc {
 	bus-width = <4>;
 	cap-mmc-highspeed;
 	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
 	disable-wp;
 	max-frequency = <150000000>;
 	no-sdio;