| Message ID | 20231109184453.108676-1-sebastian.reichel@collabora.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [v1,1/2] dt-bindings: es8328: convert to DT schema format | expand |
On 09/11/2023 19:44, Sebastian Reichel wrote: > Convert the binding to DT schema format. Note, that "IPVDD-supply" > got fixed to be "HPVDD-supply" during the conversion. This was > obviously a typo in the old binding. The old binding example, DT > files, chip datasheet and Linux driver use HPVDD. > > Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Thu, 09 Nov 2023 19:44:43 +0100, Sebastian Reichel wrote: > Convert the binding to DT schema format. Note, that "IPVDD-supply" > got fixed to be "HPVDD-supply" during the conversion. This was > obviously a typo in the old binding. The old binding example, DT > files, chip datasheet and Linux driver use HPVDD. > > Applied to https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next Thanks! [1/2] dt-bindings: es8328: convert to DT schema format commit: c479f4989486b79cb92f0ee3b2ffcfc77fc3e443 All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark
On Thu, 9 Nov 2023 19:44:43 +0100, Sebastian Reichel wrote: > Convert the binding to DT schema format. Note, that "IPVDD-supply" > got fixed to be "HPVDD-supply" during the conversion. This was > obviously a typo in the old binding. The old binding example, DT > files, chip datasheet and Linux driver use HPVDD. > > Applied, thanks! [2/2] arm64: dts: rockchip: add analog audio to RK3588 EVB1 commit: 97c39c7a0965b3eba87baa2b7d51443a46e21b8f Best regards,
diff --git a/Documentation/devicetree/bindings/sound/es8328.txt b/Documentation/devicetree/bindings/sound/es8328.txt deleted file mode 100644 index 33fbf058c997..000000000000 --- a/Documentation/devicetree/bindings/sound/es8328.txt +++ /dev/null @@ -1,38 +0,0 @@ -Everest ES8328 audio CODEC - -This device supports both I2C and SPI. - -Required properties: - - - compatible : Should be "everest,es8328" or "everest,es8388" - - DVDD-supply : Regulator providing digital core supply voltage 1.8 - 3.6V - - AVDD-supply : Regulator providing analog supply voltage 3.3V - - PVDD-supply : Regulator providing digital IO supply voltage 1.8 - 3.6V - - IPVDD-supply : Regulator providing analog output voltage 3.3V - - clocks : A 22.5792 or 11.2896 MHz clock - - reg : the I2C address of the device for I2C, the chip select number for SPI - -Pins on the device (for linking into audio routes): - - * LOUT1 - * LOUT2 - * ROUT1 - * ROUT2 - * LINPUT1 - * RINPUT1 - * LINPUT2 - * RINPUT2 - * Mic Bias - - -Example: - -codec: es8328@11 { - compatible = "everest,es8328"; - DVDD-supply = <®_3p3v>; - AVDD-supply = <®_3p3v>; - PVDD-supply = <®_3p3v>; - HPVDD-supply = <®_3p3v>; - clocks = <&clks 169>; - reg = <0x11>; -}; diff --git a/Documentation/devicetree/bindings/sound/everest,es8328.yaml b/Documentation/devicetree/bindings/sound/everest,es8328.yaml new file mode 100644 index 000000000000..a0f4670fa38c --- /dev/null +++ b/Documentation/devicetree/bindings/sound/everest,es8328.yaml @@ -0,0 +1,77 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/sound/everest,es8328.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Everest ES8328 audio CODEC + +description: + Everest Audio Codec, which can be connected via I2C or SPI. + Pins on the device (for linking into audio routes) are + * LOUT1 + * LOUT2 + * ROUT1 + * ROUT2 + * LINPUT1 + * RINPUT1 + * LINPUT2 + * RINPUT2 + * Mic Bias + +maintainers: + - David Yang <yangxiaohua@everest-semi.com> + +properties: + compatible: + enum: + - everest,es8328 + - everest,es8388 + + reg: + maxItems: 1 + + "#sound-dai-cells": + const: 0 + + clocks: + items: + - description: A 22.5792 or 11.2896 MHz clock + + DVDD-supply: + description: Regulator providing digital core supply voltage 1.8 - 3.6V + + AVDD-supply: + description: Regulator providing analog supply voltage 3.3V + + PVDD-supply: + description: Regulator providing digital IO supply voltage 1.8 - 3.6V + + HPVDD-supply: + description: Regulator providing analog output voltage 3.3V + +required: + - compatible + - clocks + - DVDD-supply + - AVDD-supply + - PVDD-supply + - HPVDD-supply + +additionalProperties: false + +examples: + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + es8328: codec@11 { + compatible = "everest,es8328"; + reg = <0x11>; + AVDD-supply = <®_3p3v>; + DVDD-supply = <®_3p3v>; + HPVDD-supply = <®_3p3v>; + PVDD-supply = <®_3p3v>; + clocks = <&clks 169>; + }; + };
Convert the binding to DT schema format. Note, that "IPVDD-supply" got fixed to be "HPVDD-supply" during the conversion. This was obviously a typo in the old binding. The old binding example, DT files, chip datasheet and Linux driver use HPVDD. Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com> --- .../devicetree/bindings/sound/es8328.txt | 38 --------- .../bindings/sound/everest,es8328.yaml | 77 +++++++++++++++++++ 2 files changed, 77 insertions(+), 38 deletions(-) delete mode 100644 Documentation/devicetree/bindings/sound/es8328.txt create mode 100644 Documentation/devicetree/bindings/sound/everest,es8328.yaml