@@ -23,6 +23,19 @@ vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator {
vin-supply = <&vcc_3v3_s3>;
};
+ vcc3v3_pcie3x2: vcc3v3-minipcie {
+ compatible = "regulator-fixed";
+ enable-active-high;
+ gpios = <&gpio2 RK_PC4 GPIO_ACTIVE_HIGH>; /* PCIE_4G_PWEN */
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3x2_vcc3v3_en>;
+ regulator-name = "vcc3v3_pcie3x2";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ startup-delay-us = <5000>;
+ vin-supply = <&vcc5v0_sys>;
+ };
+
vcc3v3_pcie3x4: vcc3v3-pcie30 {
compatible = "regulator-fixed";
enable-active-high;
@@ -74,6 +87,15 @@ &pcie30phy {
status = "okay";
};
+/* B-Key, E-Key */
+&pcie3x2 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie3x2_rst>;
+ reset-gpios = <&gpio4 RK_PB6 GPIO_ACTIVE_HIGH>; /* PCIE30X4_PERSTn_M1_L */
+ vpcie3v3-supply = <&vcc3v3_pcie3x2>;
+ status = "okay";
+};
+
/* M-Key */
&pcie3x4 {
pinctrl-names = "default";
@@ -91,6 +113,14 @@ pcie2_0_rst: pcie2-0-rst {
};
pcie3 {
+ pcie3x2_rst: pcie3x2-rst {
+ rockchip,pins = <4 RK_PB6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ pcie3x2_vcc3v3_en: pcie3x2-vcc3v3-en {
+ rockchip,pins = <2 RK_PC4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
pcie3x4_rst: pcie3x4-rst {
rockchip,pins = <4 RK_PB0 RK_FUNC_GPIO &pcfg_pull_none>;
};
Edgeble NCM6A-IO board has M.2 B-Key, E-Key via PCI3x2. Add support for it. Signed-off-by: Jagan Teki <jagan@edgeble.ai> --- .../dts/rockchip/rk3588-edgeble-neu6a-io.dtsi | 30 +++++++++++++++++++ 1 file changed, 30 insertions(+)