@@ -26,6 +26,17 @@
#include "inno_hdmi.h"
+struct inno_hdmi_phy_config {
+ unsigned long pixelclock;
+ u8 pre_emphasis;
+ u8 voltage_level_control;
+};
+
+struct inno_hdmi_variant {
+ struct inno_hdmi_phy_config *phy_configs;
+ struct inno_hdmi_phy_config *default_phy_config;
+};
+
struct inno_hdmi_i2c {
struct i2c_adapter adap;
@@ -47,6 +58,8 @@ struct inno_hdmi {
struct inno_hdmi_i2c *i2c;
struct i2c_adapter *ddc;
+
+ const struct inno_hdmi_variant *variant;
};
struct inno_hdmi_connector_state {
@@ -113,6 +126,30 @@ static const char coeff_csc[][24] = {
},
};
+static struct inno_hdmi_phy_config rk3036_hdmi_phy_configs[] = {
+ { 74250000, 0x3f, 0xbb },
+ { 165000000, 0x6f, 0xbb },
+ { ~0UL, 0x00, 0x00 }
+};
+
+static int inno_hdmi_find_phy_config(struct inno_hdmi *hdmi,
+ unsigned long pixelclk)
+{
+ const struct inno_hdmi_phy_config *phy_configs =
+ hdmi->variant->phy_configs;
+ int i;
+
+ for (i = 0; phy_configs[i].pixelclock != ~0UL; i++) {
+ if (pixelclk <= phy_configs[i].pixelclock)
+ return i;
+ }
+
+ DRM_DEV_DEBUG(hdmi->dev, "No phy configuration for pixelclock %lu\n",
+ pixelclk);
+
+ return -EINVAL;
+}
+
static inline u8 hdmi_readb(struct inno_hdmi *hdmi, u16 offset)
{
return readl_relaxed(hdmi->regs + (offset) * 0x04);
@@ -164,12 +201,25 @@ static void inno_hdmi_standby(struct inno_hdmi *hdmi)
hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x15);
};
-static void inno_hdmi_power_up(struct inno_hdmi *hdmi)
+static void inno_hdmi_power_up(struct inno_hdmi *hdmi,
+ unsigned long mpixelclock)
{
+ struct inno_hdmi_phy_config *phy_config;
+ int ret = inno_hdmi_find_phy_config(hdmi, mpixelclock);
+
+ if (ret < 0) {
+ phy_config = hdmi->variant->default_phy_config;
+ DRM_DEV_ERROR(hdmi->dev,
+ "Using default phy configuration for TMDS rate %lu",
+ mpixelclock);
+ } else {
+ phy_config = &hdmi->variant->phy_configs[ret];
+ }
+
inno_hdmi_sys_power(hdmi, false);
- hdmi_writeb(hdmi, HDMI_PHY_PRE_EMPHASIS, 0x6f);
- hdmi_writeb(hdmi, HDMI_PHY_DRIVER, 0xbb);
+ hdmi_writeb(hdmi, HDMI_PHY_PRE_EMPHASIS, phy_config->pre_emphasis);
+ hdmi_writeb(hdmi, HDMI_PHY_DRIVER, phy_config->voltage_level_control);
hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x15);
hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x14);
hdmi_writeb(hdmi, HDMI_PHY_SYS_CTL, 0x10);
@@ -406,6 +456,7 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
struct drm_display_mode *mode)
{
struct drm_display_info *display = &hdmi->connector.display_info;
+ unsigned long mpixelclock = mode->clock * 1000;
/* Mute video and audio output */
hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK,
@@ -428,13 +479,13 @@ static int inno_hdmi_setup(struct inno_hdmi *hdmi,
* DCLK_LCDC, so we need to init the TMDS rate to mode pixel
* clock rate, and reconfigure the DDC clock.
*/
- inno_hdmi_i2c_init(hdmi, mode->clock * 1000);
+ inno_hdmi_i2c_init(hdmi, mpixelclock);
/* Unmute video and audio output */
hdmi_modb(hdmi, HDMI_AV_MUTE, m_AUDIO_MUTE | m_VIDEO_BLACK,
v_AUDIO_MUTE(0) | v_VIDEO_MUTE(0));
- inno_hdmi_power_up(hdmi);
+ inno_hdmi_power_up(hdmi, mpixelclock);
return 0;
}
@@ -821,6 +872,7 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
struct platform_device *pdev = to_platform_device(dev);
struct drm_device *drm = data;
struct inno_hdmi *hdmi;
+ const struct inno_hdmi_variant *variant;
int irq;
int ret;
@@ -830,6 +882,12 @@ static int inno_hdmi_bind(struct device *dev, struct device *master,
hdmi->dev = dev;
+ variant = of_device_get_match_data(hdmi->dev);
+ if (!variant)
+ return -EINVAL;
+
+ hdmi->variant = variant;
+
hdmi->regs = devm_platform_ioremap_resource(pdev, 0);
if (IS_ERR(hdmi->regs))
return PTR_ERR(hdmi->regs);
@@ -923,8 +981,14 @@ static void inno_hdmi_remove(struct platform_device *pdev)
component_del(&pdev->dev, &inno_hdmi_ops);
}
+static const struct inno_hdmi_variant rk3036_inno_hdmi_variant = {
+ .phy_configs = rk3036_hdmi_phy_configs,
+ .default_phy_config = &rk3036_hdmi_phy_configs[1],
+};
+
static const struct of_device_id inno_hdmi_dt_ids[] = {
{ .compatible = "rockchip,rk3036-inno-hdmi",
+ .data = &rk3036_inno_hdmi_variant,
},
{},
};
In preparation to support RK3128's integration of the controller, this patch adds a simple variant implementation. They mainly differ in the phy configuration required, so those are part of the match_data. The values have been taken from downstream. The pixelclocks in there are meant to be max-inclusive. Signed-off-by: Alex Bee <knaerzche@gmail.com> --- changes in v2: - no changes changes in v3: - adapt to the newly introduced inno_hdmi_power_up / inno_hdmi_standby functions drivers/gpu/drm/rockchip/inno_hdmi.c | 74 ++++++++++++++++++++++++++-- 1 file changed, 69 insertions(+), 5 deletions(-)