diff mbox series

[v2,1/4] dt-bindings: display: panel: Add BOE TH101MB31IG002-28A panel

Message ID 20231223-pinetab2-v2-1-ec1856d0030e@mecka.net (mailing list archive)
State New
Headers show
Series arm64: rockchip: Pine64 pinetab2 support | expand

Commit Message

Manuel Traut Dec. 23, 2023, 3:20 p.m. UTC 
Add bindings for the BOE TH101MB31IG002-28A LCD panel. It is
used e.g. in the Pine64 Pinetab2 and PinetabV.

Signed-off-by: Manuel Traut <manut@mecka.net>
---
 .../display/panel/boe,th101mb31ig002-28a.yaml      | 58 ++++++++++++++++++++++
 1 file changed, 58 insertions(+)

Comments

Krzysztof Kozlowski Dec. 23, 2023, 6:32 p.m. UTC | #1 
On 23/12/2023 16:20, Manuel Traut wrote:
> Add bindings for the BOE TH101MB31IG002-28A LCD panel. It is
> used e.g. in the Pine64 Pinetab2 and PinetabV.
> 
> Signed-off-by: Manuel Traut <manut@mecka.net>


Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>

Best regards,
Krzysztof
diff mbox series

Patch

diff --git a/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml
new file mode 100644
index 000000000000..32df26cbfeed
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/boe,th101mb31ig002-28a.yaml
@@ -0,0 +1,58 @@ 
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/boe,th101mb31ig002-28a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: BOE TH101MB31IG002-28A WXGA DSI Display Panel
+
+maintainers:
+  - Manuel Traut <manut@mecka.net>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+        # BOE TH101MB31IG002-28A 10.1" WXGA TFT LCD panel
+      - boe,th101mb31ig002-28a
+
+  reg: true
+  backlight: true
+  enable-gpios: true
+  power-supply: true
+  port: true
+  rotation: true
+
+required:
+  - compatible
+  - reg
+  - enable-gpios
+  - power-supply
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    dsi {
+        #address-cells = <1>;
+        #size-cells = <0>;
+        panel@0 {
+            compatible = "boe,th101mb31ig002-28a";
+            reg = <0>;
+            backlight = <&backlight_lcd0>;
+            enable-gpios = <&gpio 45 GPIO_ACTIVE_HIGH>;
+            rotation = <90>;
+            power-supply = <&vcc_3v3>;
+            port {
+                panel_in_dsi: endpoint {
+                    remote-endpoint = <&dsi_out_con>;
+                };
+            };
+        };
+    };
+
+...