diff mbox series

[1/4] arm64: dts: rockchip: Move device specific properties

Message ID 20240123212111.202146-2-macroalpha82@gmail.com (mailing list archive)
State New
Headers show
Series Add Support for RK3566 Anbernic RG-ARC | expand

Commit Message

Chris Morgan Jan. 23, 2024, 9:21 p.m. UTC 
From: Chris Morgan <macromorgan@hotmail.com>

Move device specific properties related to the ADC Joystick to
different board specific device trees. This is in preparation for
adding the Anbernic RG-Arc series of devices.

Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
---
 .../dts/rockchip/rk3566-anbernic-rg353x.dtsi  | 74 +++++++++++++++++++
 .../dts/rockchip/rk3566-anbernic-rg503.dts    | 74 +++++++++++++++++++
 .../dts/rockchip/rk3566-anbernic-rgxx3.dtsi   | 74 -------------------
 3 files changed, 148 insertions(+), 74 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
index 2a2821f4c580..63a18ff36cea 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg353x.dtsi
@@ -8,11 +8,73 @@ 
 #include "rk3566-anbernic-rgxx3.dtsi"
 
 / {
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
 	backlight: backlight {
 		compatible = "pwm-backlight";
 		power-supply = <&vcc_sys>;
 		pwms = <&pwm4 0 25000 0>;
 	};
+
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
 };
 
 &cru {
@@ -83,6 +145,18 @@  button-right {
 		linux,code = <BTN_DPAD_RIGHT>;
 	};
 
+	button-thumbl {
+		gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		label = "THUMBL";
+		linux,code = <BTN_THUMBL>;
+	};
+
+	button-thumbr {
+		gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+		label = "THUMBR";
+		linux,code = <BTN_THUMBR>;
+	};
+
 	button-y {
 		gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_LOW>;
 		label = "WEST";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
index c763c7f3b1b3..94e6dd61a2db 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rg503.dts
@@ -17,6 +17,61 @@  aliases {
 		mmc2 = &sdmmc2;
 	};
 
+	adc-joystick {
+		compatible = "adc-joystick";
+		io-channels = <&adc_mux 0>,
+			      <&adc_mux 1>,
+			      <&adc_mux 2>,
+			      <&adc_mux 3>;
+		pinctrl-0 = <&joy_mux_en>;
+		pinctrl-names = "default";
+		poll-interval = <60>;
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		axis@0 {
+			reg = <0>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_X>;
+		};
+
+		axis@1 {
+			reg = <1>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_RX>;
+		};
+
+		axis@2 {
+			reg = <2>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <15 1023>;
+			linux,code = <ABS_Y>;
+		};
+
+		axis@3 {
+			reg = <3>;
+			abs-flat = <32>;
+			abs-fuzz = <32>;
+			abs-range = <1023 15>;
+			linux,code = <ABS_RY>;
+		};
+	};
+
+	adc_mux: adc-mux {
+		compatible = "io-channel-mux";
+		channels = "left_x", "right_x", "left_y", "right_y";
+		#io-channel-cells = <1>;
+		io-channels = <&saradc 3>;
+		io-channel-names = "parent";
+		mux-controls = <&gpio_mux>;
+		settle-time-us = <100>;
+	};
+
 	battery: battery {
 		compatible = "simple-battery";
 		charge-full-design-microamp-hours = <3472000>;
@@ -36,6 +91,13 @@  battery: battery {
 					<3400000 0>;
 	};
 
+	gpio_mux: mux-controller {
+		compatible = "gpio-mux";
+		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
+			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
+		#mux-control-cells = <0>;
+	};
+
 	gpio_spi: spi {
 		compatible = "spi-gpio";
 		pinctrl-names = "default";
@@ -174,6 +236,18 @@  button-right {
 		linux,code = <BTN_DPAD_RIGHT>;
 	};
 
+	button-thumbl {
+		gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
+		label = "THUMBL";
+		linux,code = <BTN_THUMBL>;
+	};
+
+	button-thumbr {
+		gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
+		label = "THUMBR";
+		linux,code = <BTN_THUMBR>;
+	};
+
 	button-y {
 		gpios = <&gpio3 RK_PC2 GPIO_ACTIVE_LOW>;
 		label = "WEST";
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
index 8cbf3d9a4f22..18b8c2e7befa 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3566-anbernic-rgxx3.dtsi
@@ -14,51 +14,6 @@  chosen: chosen {
 		stdout-path = "serial2:1500000n8";
 	};
 
-	adc-joystick {
-		compatible = "adc-joystick";
-		io-channels = <&adc_mux 0>,
-			      <&adc_mux 1>,
-			      <&adc_mux 2>,
-			      <&adc_mux 3>;
-		pinctrl-0 = <&joy_mux_en>;
-		pinctrl-names = "default";
-		poll-interval = <60>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		axis@0 {
-			reg = <0>;
-			abs-flat = <32>;
-			abs-fuzz = <32>;
-			abs-range = <1023 15>;
-			linux,code = <ABS_X>;
-		};
-
-		axis@1 {
-			reg = <1>;
-			abs-flat = <32>;
-			abs-fuzz = <32>;
-			abs-range = <15 1023>;
-			linux,code = <ABS_RX>;
-		};
-
-		axis@2 {
-			reg = <2>;
-			abs-flat = <32>;
-			abs-fuzz = <32>;
-			abs-range = <15 1023>;
-			linux,code = <ABS_Y>;
-		};
-
-		axis@3 {
-			reg = <3>;
-			abs-flat = <32>;
-			abs-fuzz = <32>;
-			abs-range = <1023 15>;
-			linux,code = <ABS_RY>;
-		};
-	};
-
 	adc_keys: adc-keys {
 		compatible = "adc-keys";
 		io-channels = <&saradc 0>;
@@ -77,16 +32,6 @@  button-mode {
 		};
 	};
 
-	adc_mux: adc-mux {
-		compatible = "io-channel-mux";
-		channels = "left_x", "right_x", "left_y", "right_y";
-		#io-channel-cells = <1>;
-		io-channels = <&saradc 3>;
-		io-channel-names = "parent";
-		mux-controls = <&gpio_mux>;
-		settle-time-us = <100>;
-	};
-
 	gpio_keys_control: gpio-keys-control {
 		compatible = "gpio-keys";
 		pinctrl-0 = <&btn_pins_ctrl>;
@@ -128,18 +73,6 @@  button-start {
 			linux,code = <BTN_START>;
 		};
 
-		button-thumbl {
-			gpios = <&gpio3 RK_PA1 GPIO_ACTIVE_LOW>;
-			label = "THUMBL";
-			linux,code = <BTN_THUMBL>;
-		};
-
-		button-thumbr {
-			gpios = <&gpio3 RK_PA2 GPIO_ACTIVE_LOW>;
-			label = "THUMBR";
-			linux,code = <BTN_THUMBR>;
-		};
-
 		button-up {
 			gpios = <&gpio3 RK_PA3 GPIO_ACTIVE_LOW>;
 			label = "DPAD-UP";
@@ -172,13 +105,6 @@  button-vol-up {
 		};
 	};
 
-	gpio_mux: mux-controller {
-		compatible = "gpio-mux";
-		mux-gpios = <&gpio0 RK_PB6 GPIO_ACTIVE_LOW>,
-			    <&gpio0 RK_PB7 GPIO_ACTIVE_LOW>;
-		#mux-control-cells = <0>;
-	};
-
 	hdmi-con {
 		compatible = "hdmi-connector";
 		ddc-i2c-bus = <&i2c5>;