[v2,2/2] arm64: dts: rockchip: add Protonic MECSBC device-tree

Commit Message

Sascha Hauer April 5, 2024, 10:14 a.m. UTC

From: David Jander <[e-mail]>

MECSBC is a single board computer for blood analysis machines from
RR-Mechatronics, designed and manufactured by Protonic Holland, based on
the Rockchip RK3568 SoC.

Signed-off-by: David Jander <[e-mail]>
Signed-off-by: Sascha Hauer <[e-mail]>
---
 arch/arm64/boot/dts/rockchip/Makefile          |   1 +
 arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts | 404 +++++++++++++++++++++++++
 2 files changed, 405 insertions(+)

Comments

Andrew Lunn April 5, 2024, 4:12 p.m. UTC | #1

> +&gmac1 {
> +	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
> +	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
> +	phy-handle = <&rgmii_phy1>;
> +	phy-mode = "rgmii-id";
> +	clock_in_out = "output";
> +	pinctrl-names = "default";
> +	pinctrl-0 = <&gmac1m1_miim
> +		     &gmac1m1_tx_bus2
> +		     &gmac1m1_rx_bus2
> +		     &gmac1m1_rgmii_clk
> +		     &gmac1m1_clkinout
> +		     &gmac1m1_rgmii_bus>;
> +	status = "okay";
> +};

Thank for changing it.

Reviewed-by: Andrew Lunn <[e-mail]>

    Andrew

Patch

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile
index f906a868b71ac..51c242c462b04 100644
--- a/arch/arm64/boot/dts/rockchip/Makefile
+++ b/arch/arm64/boot/dts/rockchip/Makefile
@@ -100,6 +100,7 @@  dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-evb1-v10.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r66s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-fastrhino-r68s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-lubancat-2.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-mecsbc.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5c.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-nanopi-r5s.dtb
 dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3568-odroid-m1.dtb
diff --git a/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
new file mode 100644
index 0000000000000..edd54c5932337
--- /dev/null
+++ b/arch/arm64/boot/dts/rockchip/rk3568-mecsbc.dts
@@ -0,0 +1,404 @@ 
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/rockchip.h>
+#include <dt-bindings/pwm/pwm.h>
+#include "rk3568.dtsi"
+
+/ {
+	model = "Protonic MECSBC";
+	compatible = "prt,mecsbc", "rockchip,rk3568";
+
+	aliases {
+		mmc0 = &sdhci;
+		mmc1 = &sdmmc0;
+	};
+
+	chosen: chosen {
+		stdout-path = "serial2:1500000n8";
+	};
+
+	tas2562-sound {
+		compatible = "simple-audio-card";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,name = "Speaker";
+		simple-audio-card,mclk-fs = <256>;
+
+		simple-audio-card,cpu {
+			sound-dai = <&i2s1_8ch>;
+		};
+
+		simple-audio-card,codec {
+			sound-dai = <&tas2562>;
+		};
+	};
+
+	vdd_gpu: regulator-vdd-gpu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm1 0 5000 PWM_POLARITY_INVERTED>;
+		regulator-name = "vdd_gpu";
+		regulator-min-microvolt = <915000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
+	};
+
+	vcc_sd: regulator-sd {
+		compatible = "regulator-gpio";
+		enable-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+		gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+		regulator-name = "sdcard-gpio-supply";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+		states = <1800000 0x1>, <3300000 0x0>;
+	};
+
+	vdd_npu: regulator-vdd-npu {
+		compatible = "pwm-regulator";
+		pwms = <&pwm2 0 5000 PWM_POLARITY_INVERTED>;
+		regulator-name = "vdd_npu";
+		regulator-min-microvolt = <915000>;
+		regulator-max-microvolt = <1000000>;
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-settling-time-up-us = <250>;
+		pwm-dutycycle-range = <0 100>; /* dutycycle inverted 0% => 0.915V */
+	};
+
+	p3v3: regulator-p3v3 {
+		compatible = "regulator-fixed";
+		regulator-name = "p3v3";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+	};
+
+	p1v8: regulator-p1v8 {
+		compatible = "regulator-fixed";
+		regulator-name = "p1v8";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+	};
+};
+
+&combphy0 {
+	status = "okay";
+};
+
+&combphy1 {
+	status = "okay";
+};
+
+&combphy2 {
+	status = "okay";
+};
+
+&cpu0 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&cpu3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&gmac1 {
+	assigned-clocks = <&cru SCLK_GMAC1_RX_TX>, <&cru SCLK_GMAC1>;
+	assigned-clock-parents = <&cru SCLK_GMAC1_RGMII_SPEED>, <&cru CLK_MAC1_2TOP>;
+	phy-handle = <&rgmii_phy1>;
+	phy-mode = "rgmii-id";
+	clock_in_out = "output";
+	pinctrl-names = "default";
+	pinctrl-0 = <&gmac1m1_miim
+		     &gmac1m1_tx_bus2
+		     &gmac1m1_rx_bus2
+		     &gmac1m1_rgmii_clk
+		     &gmac1m1_clkinout
+		     &gmac1m1_rgmii_bus>;
+	status = "okay";
+};
+
+&gpu {
+	mali-supply = <&vdd_gpu>;
+	status = "okay";
+};
+
+&i2c0 {
+	status = "okay";
+
+	vdd_cpu: regulator@60 {
+		compatible = "fcs,fan53555";
+		reg = <0x60>;
+		fcs,suspend-voltage-selector = <1>;
+		regulator-name = "vdd_cpu";
+		regulator-always-on;
+		regulator-boot-on;
+		regulator-min-microvolt = <800000>;
+		regulator-max-microvolt = <1150000>;
+		regulator-ramp-delay = <2300>;
+
+		regulator-state-mem {
+			regulator-off-in-suspend;
+		};
+	};
+};
+
+&i2c2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2m0_xfer>;
+};
+
+&i2c3 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c3m0_xfer>;
+	status = "okay";
+
+	tas2562: amplifier@4c {
+		compatible = "ti,tas2562";
+		reg = <0x4c>;
+		#sound-dai-cells = <0>;
+		shutdown-gpios = <&gpio1 RK_PD4 GPIO_ACTIVE_HIGH>;
+		interrupt-parent = <&gpio1>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&pinctrl_tas2562>;
+		interrupts = <RK_PD1 IRQ_TYPE_LEVEL_LOW>;
+		ti,imon-slot-no = <0>;
+	};
+};
+
+&i2c5 {
+	status = "okay";
+
+	temperature-sensor@48 {
+		compatible = "ti,tmp1075";
+		reg = <0x48>;
+	};
+
+	rtc@51 {
+		compatible = "nxp,pcf85363";
+		reg = <0x51>;
+		#clock-cells = <0>;
+		clock-output-names = "rtcic_32kout";
+	};
+};
+
+&i2s1_8ch {
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2s1m0_sclktx &i2s1m0_lrcktx &i2s1m0_sdi0 &i2s1m0_sdo0>;
+	rockchip,trcm-sync-tx-only;
+	status = "okay";
+};
+
+&mdio1 {
+	rgmii_phy1: ethernet-phy@2 {
+		compatible = "ethernet-phy-ieee802.3-c22";
+		reg = <0x2>;
+		pinctrl-names = "default";
+		pinctrl-0 = <&eth_phy1_rst>;
+		reset-assert-us = <20000>;
+		reset-deassert-us = <100000>;
+		reset-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pcie2x1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie20m1_pins>;
+	reset-gpios = <&gpio3 RK_PC1 GPIO_ACTIVE_HIGH>;
+	status = "okay";
+};
+
+&pcie30phy {
+	status = "okay";
+};
+
+&pcie3x2 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie30x2m1_pins>;
+	reset-gpios = <&gpio2 RK_PD6 GPIO_ACTIVE_HIGH>;
+	vpcie3v3-supply = <&p3v3>;
+	status = "okay";
+};
+
+&pinctrl {
+	ethernet {
+		eth_phy1_rst: eth-phy1-rst {
+			rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
+	tas2562 {
+		pinctrl_tas2562: tas2562 {
+			rockchip,pins = <1 RK_PD4 RK_FUNC_GPIO &pcfg_pull_up>;
+		};
+	};
+};
+
+&pmu_io_domains {
+	pmuio1-supply = <&p3v3>;
+	pmuio2-supply = <&p3v3>;
+	vccio1-supply = <&p1v8>;
+	vccio2-supply = <&p1v8>;
+	vccio3-supply = <&vcc_sd>;
+	vccio4-supply = <&p1v8>;
+	vccio5-supply = <&p3v3>;
+	vccio6-supply = <&p1v8>;
+	vccio7-supply = <&p3v3>;
+	status = "okay";
+};
+
+&saradc {
+	vref-supply = <&p1v8>;
+	status = "okay";
+};
+
+&sdhci {
+	bus-width = <8>;
+	max-frequency = <200000000>;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_datastrobe>;
+	vmmc-supply = <&p3v3>;
+	vqmmc-supply = <&p1v8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	no-sd;
+	no-sdio;
+	status = "okay";
+};
+
+&sdmmc0 {
+	bus-width = <4>;
+	cap-sd-highspeed;
+	cd-gpios = <&gpio0 RK_PA4 GPIO_ACTIVE_LOW>;
+	disable-wp;
+	pinctrl-names = "default";
+	pinctrl-0 = <&sdmmc0_bus4 &sdmmc0_clk &sdmmc0_cmd &sdmmc0_det>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	vmmc-supply = <&p3v3>;
+	vqmmc-supply = <&vcc_sd>;
+	status = "okay";
+};
+
+&tsadc {
+	rockchip,hw-tshut-mode = <1>;
+	rockchip,hw-tshut-polarity = <0>;
+	status = "okay";
+};
+
+&uart2 {
+	status = "okay";
+};
+
+&usb_host0_ehci {
+	status = "okay";
+};
+
+&usb_host0_ohci {
+	status = "okay";
+};
+
+&usb_host0_xhci {
+	extcon = <&usb2phy0>;
+	status = "okay";
+	dr_mode = "host";
+};
+
+&usb_host1_ehci {
+	status = "okay";
+};
+
+&usb_host1_ohci {
+	status = "okay";
+};
+
+&usb_host1_xhci {
+	status = "okay";
+};
+
+&usb2phy0 {
+	status = "okay";
+};
+
+&usb2phy0_host {
+	status = "okay";
+};
+
+&usb2phy0_otg {
+	status = "okay";
+};
+
+&usb2phy1 {
+	status = "okay";
+};
+
+&usb2phy1_host {
+	status = "okay";
+};
+
+&usb2phy1_otg {
+	status = "okay";
+};
+
+&pwm1 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm1m0_pins>;
+};
+
+&pwm2 {
+	status = "okay";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm2m0_pins>;
+};
+
+&gpu_opp_table {
+	compatible = "operating-points-v2";
+
+	opp-200000000 {
+		opp-hz = /bits/ 64 <200000000>;
+		opp-microvolt = <915000>;
+	};
+
+	opp-300000000 {
+		opp-hz = /bits/ 64 <300000000>;
+		opp-microvolt = <915000>;
+	};
+
+	opp-400000000 {
+		opp-hz = /bits/ 64 <400000000>;
+		opp-microvolt = <915000>;
+	};
+
+	opp-600000000 {
+		opp-hz = /bits/ 64 <600000000>;
+		opp-microvolt = <920000>;
+	};
+
+	opp-700000000 {
+		opp-hz = /bits/ 64 <700000000>;
+		opp-microvolt = <950000>;
+	};
+
+	opp-800000000 {
+		opp-hz = /bits/ 64 <800000000>;
+		opp-microvolt = <1000000>;
+	};
+};