| Message ID | 20240517122509.4626-1-alchark@gmail.com (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | arm64: dts: rockchip: add rfkill node for M.2 Key E Bluetooth on Rock 5B | expand |
On Fri, 17 May 2024 16:25:08 +0400, Alexey Charkov wrote: > By default the BT WAKE signal inside the M.2 key E connector on Radxa > Rock 5B is driven low, which results in the Bluetooth function being > disabled even if the inserted M.2 card supports it. Expose this signal > as an RFKILL device so that it can be enabled by the userspace. > > Tested with an Intel AX210 card, which connects a Bluetooth device over > the USB 2.0 bus. > > [...] Applied, thanks! [1/1] arm64: dts: rockchip: add rfkill node for M.2 Key E Bluetooth on Rock 5B commit: 1d3ac84d6a960baa50da4163160ae82f8dc74af6 Best regards,
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts index b70313643af8..27dd95f92f33 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts +++ b/arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts @@ -65,6 +65,13 @@ rfkill { shutdown-gpios = <&gpio4 RK_PA2 GPIO_ACTIVE_HIGH>; }; + rfkill-bt { + compatible = "rfkill-gpio"; + label = "rfkill-m2-bt"; + radio-type = "bluetooth"; + shutdown-gpios = <&gpio3 RK_PD5 GPIO_ACTIVE_HIGH>; + }; + vcc3v3_pcie2x1l0: vcc3v3-pcie2x1l0-regulator { compatible = "regulator-fixed"; enable-active-high;
By default the BT WAKE signal inside the M.2 key E connector on Radxa Rock 5B is driven low, which results in the Bluetooth function being disabled even if the inserted M.2 card supports it. Expose this signal as an RFKILL device so that it can be enabled by the userspace. Tested with an Intel AX210 card, which connects a Bluetooth device over the USB 2.0 bus. Signed-off-by: Alexey Charkov <alchark@gmail.com> --- arch/arm64/boot/dts/rockchip/rk3588-rock-5b.dts | 7 +++++++ 1 file changed, 7 insertions(+)