diff mbox series

[v14,06/28] drm/tests: Add output bpc tests

Message ID 20240521-kms-hdmi-connector-state-v14-6-51950db4fedb@kernel.org (mailing list archive)
State New
Headers show
Series drm/connector: Create HDMI Connector infrastructure | expand

Commit Message

Maxime Ripard May 21, 2024, 10:13 a.m. UTC
Now that we're tracking the output bpc count in the connector state,
let's add a few tests to make sure it works as expected.

Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Signed-off-by: Maxime Ripard <mripard@kernel.org>
---
 drivers/gpu/drm/Kconfig                            |   1 +
 drivers/gpu/drm/tests/Makefile                     |   1 +
 drivers/gpu/drm/tests/drm_connector_test.c         | 140 +++++++
 drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 438 +++++++++++++++++++++
 drivers/gpu/drm/tests/drm_kunit_edid.h             | 106 +++++
 5 files changed, 686 insertions(+)

Comments

Dmitry Baryshkov May 23, 2024, 9:10 a.m. UTC | #1
On Tue, May 21, 2024 at 12:13:39PM +0200, Maxime Ripard wrote:
> Now that we're tracking the output bpc count in the connector state,
> let's add a few tests to make sure it works as expected.
> 
> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Maxime Ripard <mripard@kernel.org>
> ---
>  drivers/gpu/drm/Kconfig                            |   1 +
>  drivers/gpu/drm/tests/Makefile                     |   1 +
>  drivers/gpu/drm/tests/drm_connector_test.c         | 140 +++++++
>  drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 438 +++++++++++++++++++++
>  drivers/gpu/drm/tests/drm_kunit_edid.h             | 106 +++++
>  5 files changed, 686 insertions(+)
> 

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Sui Jingfeng May 23, 2024, 5 p.m. UTC | #2
Hi, Maxime


I love you patch, yet it generates warnning calltrace. Despite it's
just a warning but it can overwhelm when we run kunit tests. Hence,
I suggest switch to the drm_atomic_connector_get_property() function.

Logs are pasted as below for easier to ready.


  ------------[ cut here ]------------
  WARNING: CPU: 3 PID: 1264 at drivers/gpu/drm/drm_mode_object.c:354 
drm_object_property_get_value+0x2c/0x34
  Modules linked in: drm_connector_test drm_display_helper 
drm_kunit_helpers kunit rfkill ip_set nf_tables nfnetlink vfat fat uas 
usb_storage kvm efi_pstore pstore spi_loongson_pci spi_loongson_core 
fuse efivarfs [last unloaded: drm_connector_test]
  CPU: 3 PID: 1264 Comm: kunit_try_catch Tainted: G                 N 
6.9.0+ #443
  Hardware name: Loongson 
Loongson-3A6000-HV-7A2000-XA61200/Loongson-3A6000-HV-7A2000-XA61200, 
BIOS Loongson-UDK2018-V4.0.05636-stable202311 12/
  pc 9000000003469fec ra ffff80000225afdc tp 900000011fc54000 sp 
900000011fc57d80
  a0 900000010aa84658 a1 9000000104432a00 a2 900000011fc57d98 a3 
900000011fc57d98
  a4 9000000104432a4c a5 9000000003f14e98 a6 0000000000000008 a7 
fffffffffffffffe
  t0 0000000000000010 t1 900000010aa84000 t2 ffffffffffffffff t3 
ffffffffc0c0c0c0
  t4 ffffffffc0c0c0c0 t5 0000000000000220 t6 0000000000000001 t7 
0000000000107203
  t8 0000000000107303 u0 0000000000000008 s9 90000001000ebe60 s0 
900000010aa84000
  s1 90000001470679c8 s2 9000000104432a00 s3 ffff800002284000 s4 
900000010aa84658
  s5 900000010aa84618 s6 0000000000001000 s7 0000000000000001 s8 
0000000000000000
     ra: ffff80000225afdc drm_test_connector_hdmi_init_bpc_8+0xcc/0x2d0 
[drm_connector_test]
    ERA: 9000000003469fec drm_object_property_get_value+0x2c/0x34
   CRMD: 000000b0 (PLV0 -IE -DA +PG DACF=CC DACM=CC -WE)
   PRMD: 00000004 (PPLV0 +PIE -PWE)
   EUEN: 00000000 (-FPE -SXE -ASXE -BTE)
   ECFG: 00071c1c (LIE=2-4,10-12 VS=7)
  ESTAT: 000c0000 [BRK] (IS= ECode=12 EsubCode=0)
   PRID: 0014d000 (Loongson-64bit, Loongson-3A6000-HV)
  CPU: 3 PID: 1264 Comm: kunit_try_catch Tainted: G                 N 
6.9.0+ #443
  Hardware name: Loongson 
Loongson-3A6000-HV-7A2000-XA61200/Loongson-3A6000-HV-7A2000-XA61200, 
BIOS Loongson-UDK2018-V4.0.05636-stable202311 12/
  Stack : 9000000004065000 0000000000000000 9000000002ac339c 
900000011fc54000
          900000011fc579f0 900000011fc579f8 0000000000000000 
900000011fc57b38
          900000011fc57b30 900000011fc57b30 900000011fc57940 
0000000000000001
          0000000000000001 900000011fc579f8 18e7bf3ffb6e59df 
9000000100328a00
          0000000000000001 0000000000000003 0000000000000434 
4c206e6f73676e6f
          6f4c203a656d616e 00000000000d0ad3 000000000704c000 
90000001000ebe60
          0000000000000000 0000000000000000 9000000003ee6ab0 
9000000004065000
          0000000000000000 900000010aa84618 0000000000001000 
0000000000000001
          0000000000000000 0000000000000000 9000000002ac33b4 
000055557dd80078
          00000000000000b0 0000000000000004 0000000000000000 
0000000000071c1c
          ...
  Call Trace:
  [<9000000002ac33b4>] show_stack+0x5c/0x180
  [<9000000003b1ed2c>] dump_stack_lvl+0x70/0xa0
  [<9000000003b01fd8>] __warn+0x84/0xc8
  [<9000000003ad282c>] report_bug+0x19c/0x204
  [<9000000003b1fe00>] do_bp+0x264/0x2b4
  [<0000000000000000>] 0x0
  [<9000000003469fec>] drm_object_property_get_value+0x2c/0x34
  [<ffff80000225afdc>] drm_test_connector_hdmi_init_bpc_8+0xcc/0x2d0 
[drm_connector_test]
  [<ffff800002214f3c>] kunit_try_run_case+0x7c/0x18c [kunit]
  [<ffff800002216de8>] kunit_generic_run_threadfn_adapter+0x1c/0x28 [kunit]
  [<9000000002b06238>] kthread+0x124/0x130
  [<9000000002ac1248>] ret_from_kernel_thread+0xc/0xa4

  ---[ end trace 0000000000000000 ]---
  ------------[ cut here ]------------


On 5/21/24 18:13, Maxime Ripard wrote:
> Now that we're tracking the output bpc count in the connector state,
> let's add a few tests to make sure it works as expected.
> 
> Reviewed-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
> Signed-off-by: Maxime Ripard <mripard@kernel.org>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
> ---
>   drivers/gpu/drm/Kconfig                            |   1 +
>   drivers/gpu/drm/tests/Makefile                     |   1 +
>   drivers/gpu/drm/tests/drm_connector_test.c         | 140 +++++++
>   drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c | 438 +++++++++++++++++++++
>   drivers/gpu/drm/tests/drm_kunit_edid.h             | 106 +++++
>   5 files changed, 686 insertions(+)
> 

[...]

> +
> +/*
> + * Test that the registration of a connector with a maximum bpc count of
> + * 8 succeeds, registers the max bpc property, but doesn't register the
> + * HDR output metadata one.
> + */
> +static void drm_test_connector_hdmi_init_bpc_8(struct kunit *test)
> +{
> +	struct drm_connector_init_priv *priv = test->priv;
> +	struct drm_connector *connector = &priv->connector;
> +	struct drm_property *prop;
> +	uint64_t val;
> +	int ret;
> +
> +	ret = drmm_connector_hdmi_init(&priv->drm, connector,
> +				       &dummy_funcs,
> +				       DRM_MODE_CONNECTOR_HDMIA,
> +				       &priv->ddc,
> +				       8);
> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +
> +	prop = connector->max_bpc_property;
> +	KUNIT_ASSERT_NOT_NULL(test, prop);
> +	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
> +
> +	ret = drm_object_property_get_value(&connector->base, prop, &val);


Maybe we should switch to drm_atomic_connector_get_property() instead,
as the comments of the drm_object_property_get_value() told us that
atomic drivers should never call this function directly, otherwise it
will print warnings and call trace.

> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +	KUNIT_EXPECT_EQ(test, val, 8);
> +
> +	prop = priv->drm.mode_config.hdr_output_metadata_property;
> +	KUNIT_ASSERT_NOT_NULL(test, prop);
> +	KUNIT_EXPECT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
> +}
> +
> +/*
> + * Test that the registration of a connector with a maximum bpc count of
> + * 10 succeeds and registers the max bpc and HDR output metadata
> + * properties.
> + */
> +static void drm_test_connector_hdmi_init_bpc_10(struct kunit *test)
> +{
> +	struct drm_connector_init_priv *priv = test->priv;
> +	struct drm_connector *connector = &priv->connector;
> +	struct drm_property *prop;
> +	uint64_t val;
> +	int ret;
> +
> +	ret = drmm_connector_hdmi_init(&priv->drm, connector,
> +				       &dummy_funcs,
> +				       DRM_MODE_CONNECTOR_HDMIA,
> +				       &priv->ddc,
> +				       10);
> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +
> +	prop = connector->max_bpc_property;
> +	KUNIT_ASSERT_NOT_NULL(test, prop);
> +	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
> +
> +	ret = drm_object_property_get_value(&connector->base, prop, &val);

Ditto

> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +	KUNIT_EXPECT_EQ(test, val, 10);
> +
> +	prop = priv->drm.mode_config.hdr_output_metadata_property;
> +	KUNIT_ASSERT_NOT_NULL(test, prop);
> +	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
> +}
> +
> +/*
> + * Test that the registration of a connector with a maximum bpc count of
> + * 12 succeeds and registers the max bpc and HDR output metadata
> + * properties.
> + */
> +static void drm_test_connector_hdmi_init_bpc_12(struct kunit *test)
> +{
> +	struct drm_connector_init_priv *priv = test->priv;
> +	struct drm_connector *connector = &priv->connector;
> +	struct drm_property *prop;
> +	uint64_t val;
> +	int ret;
> +
> +	ret = drmm_connector_hdmi_init(&priv->drm, connector,
> +				       &dummy_funcs,
> +				       DRM_MODE_CONNECTOR_HDMIA,
> +				       &priv->ddc,
> +				       12);
> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +
> +	prop = connector->max_bpc_property;
> +	KUNIT_ASSERT_NOT_NULL(test, prop);
> +	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
> +
> +	ret = drm_object_property_get_value(&connector->base, prop, &val);

ret = drm_atomic_connector_get_property(connector,
  connector->state, prop, &val);

Note that this function is not exported, but I think you could export it
just like what you did in the patch 02. Thank you for the amazing works.

> +	KUNIT_EXPECT_EQ(test, ret, 0);
> +	KUNIT_EXPECT_EQ(test, val, 12);
> +
> +	prop = priv->drm.mode_config.hdr_output_metadata_property;
> +	KUNIT_ASSERT_NOT_NULL(test, prop);
> +	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
> +}
> +
diff mbox series

Patch

diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 026444eeb5c6..9703429de6b9 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -77,10 +77,11 @@  config DRM_KUNIT_TEST_HELPERS
 config DRM_KUNIT_TEST
 	tristate "KUnit tests for DRM" if !KUNIT_ALL_TESTS
 	depends on DRM && KUNIT && MMU
 	select DRM_BUDDY
 	select DRM_DISPLAY_DP_HELPER
+	select DRM_DISPLAY_HDMI_STATE_HELPER
 	select DRM_DISPLAY_HELPER
 	select DRM_EXEC
 	select DRM_EXPORT_FOR_TESTS if m
 	select DRM_GEM_SHMEM_HELPER
 	select DRM_KUNIT_TEST_HELPERS
diff --git a/drivers/gpu/drm/tests/Makefile b/drivers/gpu/drm/tests/Makefile
index d6183b3d7688..56dab563abd7 100644
--- a/drivers/gpu/drm/tests/Makefile
+++ b/drivers/gpu/drm/tests/Makefile
@@ -12,10 +12,11 @@  obj-$(CONFIG_DRM_KUNIT_TEST) += \
 	drm_exec_test.o \
 	drm_format_helper_test.o \
 	drm_format_test.o \
 	drm_framebuffer_test.o \
 	drm_gem_shmem_test.o \
+	drm_hdmi_state_helper_test.o \
 	drm_managed_test.o \
 	drm_mm_test.o \
 	drm_modes_test.o \
 	drm_plane_helper_test.o \
 	drm_probe_helper_test.o \
diff --git a/drivers/gpu/drm/tests/drm_connector_test.c b/drivers/gpu/drm/tests/drm_connector_test.c
index 2661eb64a5cd..2519b91de95e 100644
--- a/drivers/gpu/drm/tests/drm_connector_test.c
+++ b/drivers/gpu/drm/tests/drm_connector_test.c
@@ -10,10 +10,12 @@ 
 #include <drm/drm_drv.h>
 #include <drm/drm_kunit_helpers.h>
 
 #include <kunit/test.h>
 
+#include "../drm_crtc_internal.h"
+
 struct drm_connector_init_priv {
 	struct drm_device drm;
 	struct drm_connector connector;
 	struct i2c_adapter ddc;
 };
@@ -204,10 +206,143 @@  static void drm_test_connector_hdmi_init_null_ddc(struct kunit *test)
 				       NULL,
 				       8);
 	KUNIT_EXPECT_EQ(test, ret, 0);
 }
 
+/*
+ * Test that the registration of a connector with an invalid maximum bpc
+ * count fails.
+ */
+static void drm_test_connector_hdmi_init_bpc_invalid(struct kunit *test)
+{
+	struct drm_connector_init_priv *priv = test->priv;
+	int ret;
+
+	ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+				       &dummy_funcs,
+				       DRM_MODE_CONNECTOR_HDMIA,
+				       &priv->ddc,
+				       9);
+	KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector with a null maximum bpc
+ * count fails.
+ */
+static void drm_test_connector_hdmi_init_bpc_null(struct kunit *test)
+{
+	struct drm_connector_init_priv *priv = test->priv;
+	int ret;
+
+	ret = drmm_connector_hdmi_init(&priv->drm, &priv->connector,
+				       &dummy_funcs,
+				       DRM_MODE_CONNECTOR_HDMIA,
+				       &priv->ddc,
+				       0);
+	KUNIT_EXPECT_LT(test, ret, 0);
+}
+
+/*
+ * Test that the registration of a connector with a maximum bpc count of
+ * 8 succeeds, registers the max bpc property, but doesn't register the
+ * HDR output metadata one.
+ */
+static void drm_test_connector_hdmi_init_bpc_8(struct kunit *test)
+{
+	struct drm_connector_init_priv *priv = test->priv;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_property *prop;
+	uint64_t val;
+	int ret;
+
+	ret = drmm_connector_hdmi_init(&priv->drm, connector,
+				       &dummy_funcs,
+				       DRM_MODE_CONNECTOR_HDMIA,
+				       &priv->ddc,
+				       8);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	prop = connector->max_bpc_property;
+	KUNIT_ASSERT_NOT_NULL(test, prop);
+	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+
+	ret = drm_object_property_get_value(&connector->base, prop, &val);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+	KUNIT_EXPECT_EQ(test, val, 8);
+
+	prop = priv->drm.mode_config.hdr_output_metadata_property;
+	KUNIT_ASSERT_NOT_NULL(test, prop);
+	KUNIT_EXPECT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+}
+
+/*
+ * Test that the registration of a connector with a maximum bpc count of
+ * 10 succeeds and registers the max bpc and HDR output metadata
+ * properties.
+ */
+static void drm_test_connector_hdmi_init_bpc_10(struct kunit *test)
+{
+	struct drm_connector_init_priv *priv = test->priv;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_property *prop;
+	uint64_t val;
+	int ret;
+
+	ret = drmm_connector_hdmi_init(&priv->drm, connector,
+				       &dummy_funcs,
+				       DRM_MODE_CONNECTOR_HDMIA,
+				       &priv->ddc,
+				       10);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	prop = connector->max_bpc_property;
+	KUNIT_ASSERT_NOT_NULL(test, prop);
+	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+
+	ret = drm_object_property_get_value(&connector->base, prop, &val);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+	KUNIT_EXPECT_EQ(test, val, 10);
+
+	prop = priv->drm.mode_config.hdr_output_metadata_property;
+	KUNIT_ASSERT_NOT_NULL(test, prop);
+	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+}
+
+/*
+ * Test that the registration of a connector with a maximum bpc count of
+ * 12 succeeds and registers the max bpc and HDR output metadata
+ * properties.
+ */
+static void drm_test_connector_hdmi_init_bpc_12(struct kunit *test)
+{
+	struct drm_connector_init_priv *priv = test->priv;
+	struct drm_connector *connector = &priv->connector;
+	struct drm_property *prop;
+	uint64_t val;
+	int ret;
+
+	ret = drmm_connector_hdmi_init(&priv->drm, connector,
+				       &dummy_funcs,
+				       DRM_MODE_CONNECTOR_HDMIA,
+				       &priv->ddc,
+				       12);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	prop = connector->max_bpc_property;
+	KUNIT_ASSERT_NOT_NULL(test, prop);
+	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+
+	ret = drm_object_property_get_value(&connector->base, prop, &val);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+	KUNIT_EXPECT_EQ(test, val, 12);
+
+	prop = priv->drm.mode_config.hdr_output_metadata_property;
+	KUNIT_ASSERT_NOT_NULL(test, prop);
+	KUNIT_EXPECT_NOT_NULL(test, drm_mode_obj_find_prop_id(&connector->base, prop->base.id));
+}
+
 /*
  * Test that the registration of an HDMI connector with an HDMI
  * connector type succeeds.
  */
 static void drm_test_connector_hdmi_init_type_valid(struct kunit *test)
@@ -282,10 +417,15 @@  KUNIT_ARRAY_PARAM(drm_connector_hdmi_init_type_invalid,
 		  drm_connector_hdmi_init_type_invalid_tests,
 		  drm_connector_hdmi_init_type_desc);
 
 static struct kunit_case drmm_connector_hdmi_init_tests[] = {
 	KUNIT_CASE(drm_test_connector_hdmi_init_valid),
+	KUNIT_CASE(drm_test_connector_hdmi_init_bpc_8),
+	KUNIT_CASE(drm_test_connector_hdmi_init_bpc_10),
+	KUNIT_CASE(drm_test_connector_hdmi_init_bpc_12),
+	KUNIT_CASE(drm_test_connector_hdmi_init_bpc_invalid),
+	KUNIT_CASE(drm_test_connector_hdmi_init_bpc_null),
 	KUNIT_CASE(drm_test_connector_hdmi_init_null_ddc),
 	KUNIT_CASE_PARAM(drm_test_connector_hdmi_init_type_valid,
 			 drm_connector_hdmi_init_type_valid_gen_params),
 	KUNIT_CASE_PARAM(drm_test_connector_hdmi_init_type_invalid,
 			 drm_connector_hdmi_init_type_invalid_gen_params),
diff --git a/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
new file mode 100644
index 000000000000..3ecae50ef47f
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_hdmi_state_helper_test.c
@@ -0,0 +1,438 @@ 
+// SPDX-License-Identifier: GPL-2.0
+
+/*
+ * Kunit test for drm_hdmi_state_helper functions
+ */
+
+#include <drm/drm_atomic.h>
+#include <drm/drm_atomic_state_helper.h>
+#include <drm/drm_atomic_uapi.h>
+#include <drm/drm_drv.h>
+#include <drm/drm_edid.h>
+#include <drm/drm_connector.h>
+#include <drm/drm_fourcc.h>
+#include <drm/drm_kunit_helpers.h>
+#include <drm/drm_managed.h>
+#include <drm/drm_modeset_helper_vtables.h>
+#include <drm/drm_print.h>
+#include <drm/drm_probe_helper.h>
+
+#include <drm/display/drm_hdmi_state_helper.h>
+
+#include "../drm_crtc_internal.h"
+
+#include <kunit/test.h>
+
+#include "drm_kunit_edid.h"
+
+struct drm_atomic_helper_connector_hdmi_priv {
+	struct drm_device drm;
+	struct drm_plane *plane;
+	struct drm_crtc *crtc;
+	struct drm_encoder encoder;
+	struct drm_connector connector;
+
+	const char *current_edid;
+	size_t current_edid_len;
+};
+
+#define connector_to_priv(c) \
+	container_of_const(c, struct drm_atomic_helper_connector_hdmi_priv, connector)
+
+static struct drm_display_mode *find_preferred_mode(struct drm_connector *connector)
+{
+	struct drm_device *drm = connector->dev;
+	struct drm_display_mode *mode, *preferred;
+
+	mutex_lock(&drm->mode_config.mutex);
+	preferred = list_first_entry(&connector->modes, struct drm_display_mode, head);
+	list_for_each_entry(mode, &connector->modes, head)
+		if (mode->type & DRM_MODE_TYPE_PREFERRED)
+			preferred = mode;
+	mutex_unlock(&drm->mode_config.mutex);
+
+	return preferred;
+}
+
+static int light_up_connector(struct kunit *test,
+			      struct drm_device *drm,
+			      struct drm_crtc *crtc,
+			      struct drm_connector *connector,
+			      struct drm_display_mode *mode,
+			      struct drm_modeset_acquire_ctx *ctx)
+{
+	struct drm_atomic_state *state;
+	struct drm_connector_state *conn_state;
+	struct drm_crtc_state *crtc_state;
+	int ret;
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	conn_state = drm_atomic_get_connector_state(state, connector);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, conn_state);
+
+	ret = drm_atomic_set_crtc_for_connector(conn_state, crtc);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	crtc_state = drm_atomic_get_crtc_state(state, crtc);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+
+	ret = drm_atomic_set_mode_for_crtc(crtc_state, mode);
+	KUNIT_EXPECT_EQ(test, ret, 0);
+
+	crtc_state->enable = true;
+	crtc_state->active = true;
+
+	ret = drm_atomic_commit(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	return 0;
+}
+
+static int set_connector_edid(struct kunit *test, struct drm_connector *connector,
+			      const char *edid, size_t edid_len)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv =
+		connector_to_priv(connector);
+	struct drm_device *drm = connector->dev;
+	int ret;
+
+	priv->current_edid = edid;
+	priv->current_edid_len = edid_len;
+
+	mutex_lock(&drm->mode_config.mutex);
+	ret = connector->funcs->fill_modes(connector, 4096, 4096);
+	mutex_unlock(&drm->mode_config.mutex);
+	KUNIT_ASSERT_GT(test, ret, 0);
+
+	return 0;
+}
+
+static int dummy_connector_get_modes(struct drm_connector *connector)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv =
+		connector_to_priv(connector);
+	const struct drm_edid *edid;
+	unsigned int num_modes;
+
+	edid = drm_edid_alloc(priv->current_edid, priv->current_edid_len);
+	if (!edid)
+		return -EINVAL;
+
+	drm_edid_connector_update(connector, edid);
+	num_modes = drm_edid_connector_add_modes(connector);
+
+	drm_edid_free(edid);
+
+	return num_modes;
+}
+
+static const struct drm_connector_helper_funcs dummy_connector_helper_funcs = {
+	.atomic_check	= drm_atomic_helper_connector_hdmi_check,
+	.get_modes	= dummy_connector_get_modes,
+};
+
+static void dummy_hdmi_connector_reset(struct drm_connector *connector)
+{
+	drm_atomic_helper_connector_reset(connector);
+	__drm_atomic_helper_connector_hdmi_reset(connector, connector->state);
+}
+
+static const struct drm_connector_funcs dummy_connector_funcs = {
+	.atomic_destroy_state	= drm_atomic_helper_connector_destroy_state,
+	.atomic_duplicate_state	= drm_atomic_helper_connector_duplicate_state,
+	.fill_modes		= drm_helper_probe_single_connector_modes,
+	.reset			= dummy_hdmi_connector_reset,
+};
+
+static
+struct drm_atomic_helper_connector_hdmi_priv *
+drm_atomic_helper_connector_hdmi_init(struct kunit *test,
+				      unsigned int max_bpc)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_connector *conn;
+	struct drm_encoder *enc;
+	struct drm_device *drm;
+	struct device *dev;
+	int ret;
+
+	dev = drm_kunit_helper_alloc_device(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, dev);
+
+	priv = drm_kunit_helper_alloc_drm_device(test, dev,
+						 struct drm_atomic_helper_connector_hdmi_priv, drm,
+						 DRIVER_MODESET | DRIVER_ATOMIC);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv);
+	test->priv = priv;
+
+	drm = &priv->drm;
+	priv->plane = drm_kunit_helper_create_primary_plane(test, drm,
+							    NULL,
+							    NULL,
+							    NULL, 0,
+							    NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->plane);
+
+	priv->crtc = drm_kunit_helper_create_crtc(test, drm,
+						  priv->plane, NULL,
+						  NULL,
+						  NULL);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, priv->crtc);
+
+	enc = &priv->encoder;
+	ret = drmm_encoder_init(drm, enc, NULL, DRM_MODE_ENCODER_TMDS, NULL);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	enc->possible_crtcs = drm_crtc_mask(priv->crtc);
+
+	conn = &priv->connector;
+	ret = drmm_connector_hdmi_init(drm, conn,
+				       &dummy_connector_funcs,
+				       DRM_MODE_CONNECTOR_HDMIA,
+				       NULL,
+				       max_bpc);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	drm_connector_helper_add(conn, &dummy_connector_helper_funcs);
+	drm_connector_attach_encoder(conn, enc);
+
+	drm_mode_config_reset(drm);
+
+	ret = set_connector_edid(test, conn,
+				 test_edid_hdmi_1080p_rgb_max_200mhz,
+				 ARRAY_SIZE(test_edid_hdmi_1080p_rgb_max_200mhz));
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	return priv;
+}
+
+/*
+ * Test that if we change the maximum bpc property to a different value,
+ * we trigger a mode change on the connector's CRTC, which will in turn
+ * disable/enable the connector.
+ */
+static void drm_test_check_output_bpc_crtc_mode_changed(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *old_conn_state;
+	struct drm_connector_state *new_conn_state;
+	struct drm_crtc_state *crtc_state;
+	struct drm_atomic_state *state;
+	struct drm_display_mode *preferred;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	conn = &priv->connector;
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	new_conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+	old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+	new_conn_state->hdmi.output_bpc = 8;
+
+	KUNIT_ASSERT_NE(test,
+			old_conn_state->hdmi.output_bpc,
+			new_conn_state->hdmi.output_bpc);
+
+	ret = drm_atomic_check_only(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+	new_conn_state = drm_atomic_get_new_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+	KUNIT_ASSERT_NE(test,
+			old_conn_state->hdmi.output_bpc,
+			new_conn_state->hdmi.output_bpc);
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+	KUNIT_EXPECT_TRUE(test, crtc_state->mode_changed);
+}
+
+/*
+ * Test that if we set the output bpc property to the same value, we
+ * don't trigger a mode change on the connector's CRTC and leave the
+ * connector unaffected.
+ */
+static void drm_test_check_output_bpc_crtc_mode_not_changed(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_modeset_acquire_ctx *ctx;
+	struct drm_connector_state *old_conn_state;
+	struct drm_connector_state *new_conn_state;
+	struct drm_crtc_state *crtc_state;
+	struct drm_atomic_state *state;
+	struct drm_display_mode *preferred;
+	struct drm_connector *conn;
+	struct drm_device *drm;
+	struct drm_crtc *crtc;
+	int ret;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	ctx = drm_kunit_helper_acquire_ctx_alloc(test);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, ctx);
+
+	conn = &priv->connector;
+	preferred = find_preferred_mode(conn);
+	KUNIT_ASSERT_NOT_NULL(test, preferred);
+
+	drm = &priv->drm;
+	crtc = priv->crtc;
+	ret = light_up_connector(test, drm, crtc, conn, preferred, ctx);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	state = drm_kunit_helper_atomic_state_alloc(test, drm, ctx);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, state);
+
+	new_conn_state = drm_atomic_get_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+	old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+	KUNIT_ASSERT_EQ(test,
+			new_conn_state->hdmi.output_bpc,
+			old_conn_state->hdmi.output_bpc);
+
+	ret = drm_atomic_check_only(state);
+	KUNIT_ASSERT_EQ(test, ret, 0);
+
+	old_conn_state = drm_atomic_get_old_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, old_conn_state);
+
+	new_conn_state = drm_atomic_get_new_connector_state(state, conn);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, new_conn_state);
+
+	KUNIT_EXPECT_EQ(test,
+			old_conn_state->hdmi.output_bpc,
+			new_conn_state->hdmi.output_bpc);
+
+	crtc_state = drm_atomic_get_new_crtc_state(state, crtc);
+	KUNIT_ASSERT_NOT_ERR_OR_NULL(test, crtc_state);
+	KUNIT_EXPECT_FALSE(test, crtc_state->mode_changed);
+}
+
+static struct kunit_case drm_atomic_helper_connector_hdmi_check_tests[] = {
+	KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_changed),
+	KUNIT_CASE(drm_test_check_output_bpc_crtc_mode_not_changed),
+	{ }
+};
+
+static struct kunit_suite drm_atomic_helper_connector_hdmi_check_test_suite = {
+	.name		= "drm_atomic_helper_connector_hdmi_check",
+	.test_cases	= drm_atomic_helper_connector_hdmi_check_tests,
+};
+
+/*
+ * Test that if the connector was initialised with a maximum bpc of 8,
+ * the value of the max_bpc and max_requested_bpc properties out of
+ * reset are also set to 8, and output_bpc is set to 0 and will be
+ * filled at atomic_check time.
+ */
+static void drm_test_check_bpc_8_value(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_connector_state *conn_state;
+	struct drm_connector *conn;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test, 8);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	conn_state = conn->state;
+	KUNIT_EXPECT_EQ(test, conn_state->max_bpc, 8);
+	KUNIT_EXPECT_EQ(test, conn_state->max_requested_bpc, 8);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 0);
+}
+
+/*
+ * Test that if the connector was initialised with a maximum bpc of 10,
+ * the value of the max_bpc and max_requested_bpc properties out of
+ * reset are also set to 10, and output_bpc is set to 0 and will be
+ * filled at atomic_check time.
+ */
+static void drm_test_check_bpc_10_value(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_connector_state *conn_state;
+	struct drm_connector *conn;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test, 10);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	conn_state = conn->state;
+	KUNIT_EXPECT_EQ(test, conn_state->max_bpc, 10);
+	KUNIT_EXPECT_EQ(test, conn_state->max_requested_bpc, 10);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 0);
+}
+
+/*
+ * Test that if the connector was initialised with a maximum bpc of 12,
+ * the value of the max_bpc and max_requested_bpc properties out of
+ * reset are also set to 12, and output_bpc is set to 0 and will be
+ * filled at atomic_check time.
+ */
+static void drm_test_check_bpc_12_value(struct kunit *test)
+{
+	struct drm_atomic_helper_connector_hdmi_priv *priv;
+	struct drm_connector_state *conn_state;
+	struct drm_connector *conn;
+
+	priv = drm_atomic_helper_connector_hdmi_init(test, 12);
+	KUNIT_ASSERT_NOT_NULL(test, priv);
+
+	conn = &priv->connector;
+	conn_state = conn->state;
+	KUNIT_EXPECT_EQ(test, conn_state->max_bpc, 12);
+	KUNIT_EXPECT_EQ(test, conn_state->max_requested_bpc, 12);
+	KUNIT_EXPECT_EQ(test, conn_state->hdmi.output_bpc, 0);
+}
+
+static struct kunit_case drm_atomic_helper_connector_hdmi_reset_tests[] = {
+	KUNIT_CASE(drm_test_check_bpc_8_value),
+	KUNIT_CASE(drm_test_check_bpc_10_value),
+	KUNIT_CASE(drm_test_check_bpc_12_value),
+	{ }
+};
+
+static struct kunit_suite drm_atomic_helper_connector_hdmi_reset_test_suite = {
+	.name		= "drm_atomic_helper_connector_hdmi_reset",
+	.test_cases 	= drm_atomic_helper_connector_hdmi_reset_tests,
+};
+
+kunit_test_suites(
+	&drm_atomic_helper_connector_hdmi_check_test_suite,
+	&drm_atomic_helper_connector_hdmi_reset_test_suite,
+);
+
+MODULE_AUTHOR("Maxime Ripard <mripard@kernel.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/gpu/drm/tests/drm_kunit_edid.h b/drivers/gpu/drm/tests/drm_kunit_edid.h
new file mode 100644
index 000000000000..0366dd29c820
--- /dev/null
+++ b/drivers/gpu/drm/tests/drm_kunit_edid.h
@@ -0,0 +1,106 @@ 
+#ifndef DRM_KUNIT_EDID_H_
+#define DRM_KUNIT_EDID_H_
+
+/*
+ * edid-decode (hex):
+ *
+ * 00 ff ff ff ff ff ff 00 31 d8 2a 00 00 00 00 00
+ * 00 21 01 03 81 a0 5a 78 02 00 00 00 00 00 00 00
+ * 00 00 00 20 00 00 01 01 01 01 01 01 01 01 01 01
+ * 01 01 01 01 01 01 02 3a 80 18 71 38 2d 40 58 2c
+ * 45 00 40 84 63 00 00 1e 00 00 00 fc 00 54 65 73
+ * 74 20 45 44 49 44 0a 20 20 20 00 00 00 fd 00 32
+ * 46 1e 46 0f 00 0a 20 20 20 20 20 20 00 00 00 10
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01 92
+ *
+ * 02 03 1b 81 e3 05 00 20 41 10 e2 00 4a 6d 03 0c
+ * 00 12 34 00 28 20 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
+ * 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 d0
+ *
+ * ----------------
+ *
+ * Block 0, Base EDID:
+ *   EDID Structure Version & Revision: 1.3
+ *   Vendor & Product Identification:
+ *     Manufacturer: LNX
+ *     Model: 42
+ *     Made in: 2023
+ *   Basic Display Parameters & Features:
+ *     Digital display
+ *     DFP 1.x compatible TMDS
+ *     Maximum image size: 160 cm x 90 cm
+ *     Gamma: 2.20
+ *     Monochrome or grayscale display
+ *     First detailed timing is the preferred timing
+ *   Color Characteristics:
+ *     Red  : 0.0000, 0.0000
+ *     Green: 0.0000, 0.0000
+ *     Blue : 0.0000, 0.0000
+ *     White: 0.0000, 0.0000
+ *   Established Timings I & II:
+ *     DMT 0x04:   640x480    59.940476 Hz   4:3     31.469 kHz     25.175000 MHz
+ *   Standard Timings: none
+ *   Detailed Timing Descriptors:
+ *     DTD 1:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz (1600 mm x 900 mm)
+ *                  Hfront   88 Hsync  44 Hback  148 Hpol P
+ *                  Vfront    4 Vsync   5 Vback   36 Vpol P
+ *     Display Product Name: 'Test EDID'
+ *     Display Range Limits:
+ *       Monitor ranges (GTF): 50-70 Hz V, 30-70 kHz H, max dotclock 150 MHz
+ *     Dummy Descriptor:
+ *   Extension blocks: 1
+ * Checksum: 0x92
+ *
+ * ----------------
+ *
+ * Block 1, CTA-861 Extension Block:
+ *   Revision: 3
+ *   Underscans IT Video Formats by default
+ *   Native detailed modes: 1
+ *   Colorimetry Data Block:
+ *     sRGB
+ *   Video Data Block:
+ *     VIC  16:  1920x1080   60.000000 Hz  16:9     67.500 kHz    148.500000 MHz
+ *   Video Capability Data Block:
+ *     YCbCr quantization: No Data
+ *     RGB quantization: Selectable (via AVI Q)
+ *     PT scan behavior: No Data
+ *     IT scan behavior: Always Underscanned
+ *     CE scan behavior: Always Underscanned
+ *   Vendor-Specific Data Block (HDMI), OUI 00-0C-03:
+ *     Source physical address: 1.2.3.4
+ *     Maximum TMDS clock: 200 MHz
+ *     Extended HDMI video details:
+ * Checksum: 0xd0  Unused space in Extension Block: 100 bytes
+ */
+static const unsigned char test_edid_hdmi_1080p_rgb_max_200mhz[] = {
+  0x00, 0xff, 0xff, 0xff, 0xff, 0xff, 0xff, 0x00, 0x31, 0xd8, 0x2a, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x21, 0x01, 0x03, 0x81, 0xa0, 0x5a, 0x78,
+  0x02, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x20,
+  0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,
+  0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x02, 0x3a, 0x80, 0x18, 0x71, 0x38,
+  0x2d, 0x40, 0x58, 0x2c, 0x45, 0x00, 0x40, 0x84, 0x63, 0x00, 0x00, 0x1e,
+  0x00, 0x00, 0x00, 0xfc, 0x00, 0x54, 0x65, 0x73, 0x74, 0x20, 0x45, 0x44,
+  0x49, 0x44, 0x0a, 0x20, 0x20, 0x20, 0x00, 0x00, 0x00, 0xfd, 0x00, 0x32,
+  0x46, 0x00, 0x00, 0xc4, 0x00, 0x0a, 0x20, 0x20, 0x20, 0x20, 0x20, 0x20,
+  0x00, 0x00, 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x41, 0x02, 0x03, 0x1b, 0x81,
+  0xe3, 0x05, 0x00, 0x20, 0x41, 0x10, 0xe2, 0x00, 0x4a, 0x6d, 0x03, 0x0c,
+  0x00, 0x12, 0x34, 0x00, 0x28, 0x20, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,
+  0x00, 0x00, 0x00, 0xd0
+};
+
+#endif // DRM_KUNIT_EDID_H_