| Message ID | 20240623215631.440399-1-heiko@sntech.de (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | ARM: dts: rockchip: use constant for HCLK_SFC on rk3128 | expand |
diff --git a/arch/arm/boot/dts/rockchip/rk3128.dtsi b/arch/arm/boot/dts/rockchip/rk3128.dtsi index 5019aae1be328..4bdb6b0a618e7 100644 --- a/arch/arm/boot/dts/rockchip/rk3128.dtsi +++ b/arch/arm/boot/dts/rockchip/rk3128.dtsi @@ -429,7 +429,7 @@ sfc: spi@1020c000 { compatible = "rockchip,sfc"; reg = <0x1020c000 0x8000>; interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru SCLK_SFC>, <&cru 479>; + clocks = <&cru SCLK_SFC>, <&cru HCLK_SFC>; clock-names = "clk_sfc", "hclk_sfc"; status = "disabled"; };
Due to inter-branch dependencies, it was necessary to add the rk3128 sfc controller with its hclk_sfc using the numeric clock id value instead of the nicer constant from the binding. Now that it's available, change over to this constant. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- I've modified the commit adding the sfc controller to use the numeric value to not cause build errors between the branches. To be applied after 6.11-rc1 . arch/arm/boot/dts/rockchip/rk3128.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)