diff mbox series

[5/6] arm64: dts: rockchip: use clock-generator for pcie-refclk on rk3588-tiger

Message ID 20240709123121.1452394-6-heiko@sntech.de (mailing list archive)
State New
Headers show
Series Binding and driver for "dumb" clock generators | expand

Commit Message

Heiko Stübner July 9, 2024, 12:31 p.m. UTC
Using a combination of fixed clock and gpio-gate clock works but does
not describe the actual hardware. Use the new clock-generator binding
to describe this in a nicer way.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 13 ++++---------
 1 file changed, 4 insertions(+), 9 deletions(-)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
index f870f84da1e6d..4c5be356fa7fe 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
@@ -49,19 +49,14 @@  led-1 {
 	 * 100MHz reference clock for PCIe peripherals from PI6C557-05BLE
 	 * clock generator.
 	 * The clock output is gated via the OE pin on the clock generator.
-	 * This is modeled as a fixed-clock plus a gpio-gate-clock.
 	 */
-	pcie_refclk_gen: pcie-refclk-gen-clock {
-		compatible = "fixed-clock";
+	pcie_refclk: pcie-clock-generator {
+		compatible = "diodes,pi6c557-05b", "clock-generator";
 		#clock-cells = <0>;
 		clock-frequency = <100000000>;
-	};
-
-	pcie_refclk: pcie-refclk-clock {
-		compatible = "gpio-gate-clock";
-		clocks = <&pcie_refclk_gen>;
-		#clock-cells = <0>;
+		clock-output-names = "pcie3_refclk";
 		enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */
+		vdd-supply = <&vcca_3v3_s0>;
 	};
 
 	vcc_1v1_nldo_s3: vcc-1v1-nldo-s3-regulator {