diff mbox series

[6/6] arm64: dts: rockchip: add pinctrl for clk-generator gpio on rk3588-tiger

Message ID 20240709123121.1452394-7-heiko@sntech.de (mailing list archive)
State New
Headers show
Series Binding and driver for "dumb" clock generators | expand

Commit Message

Heiko Stübner July 9, 2024, 12:31 p.m. UTC 
Having pinctrl entries defined for used gpios is helpful as it makes
sure the pin isn't used anywhere else.

The somewhat similar rk3588-jaguar board has a pinctrl entry already,
so add the same for rk3588-tiger.

Signed-off-by: Heiko Stuebner <heiko@sntech.de>
---
 arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi | 8 ++++++++
 1 file changed, 8 insertions(+)
diff mbox series

Patch

diff --git a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
index 4c5be356fa7fe..fb5f1fa25fb9e 100644
--- a/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk3588-tiger.dtsi
@@ -56,6 +56,8 @@  pcie_refclk: pcie-clock-generator {
 		clock-frequency = <100000000>;
 		clock-output-names = "pcie3_refclk";
 		enable-gpios = <&gpio4 RK_PB4 GPIO_ACTIVE_HIGH>; /* PCIE30X4_CLKREQN_M1_L */
+		pinctrl-names = "default";
+		pinctrl-0 = <&pcie30x4_clkreqn_m1_l>;
 		vdd-supply = <&vcca_3v3_s0>;
 	};
 
@@ -339,6 +341,12 @@  module_led_pin: module-led-pin {
 		};
 	};
 
+	pcie30x4 {
+		pcie30x4_clkreqn_m1_l: pcie30x4-clkreqn-m1-l {
+			rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+		};
+	};
+
 	usb3 {
 		usb3_id: usb3-id {
 			rockchip,pins =