Message ID | 20240717-alkalize-bouncy-83e748284bc7@spud (mailing list archive) |
---|---|
State | New |
Headers | show |
Series | Removal of non-existent DAC nodes | expand |
On 17/07/2024 11:37, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > Neither the imx8dxl-evk or imx8qm-mek have a Rohm DAC on them as far as > I can tell from online documentation, and they certainly do not have a > dh2228fv, as this device does not actually exist! Remove the DAC nodes > from the devicetrees as it is not acceptable to pretend to have a device > on a board in order to bind the spidev driver in Linux. > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com> > --- Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> Best regards, Krzysztof
On Wed, Jul 17, 2024 at 10:37:53AM +0100, Conor Dooley wrote: > From: Conor Dooley <conor.dooley@microchip.com> > > Neither the imx8dxl-evk or imx8qm-mek have a Rohm DAC on them as far as > I can tell from online documentation, and they certainly do not have a > dh2228fv, as this device does not actually exist! Remove the DAC nodes > from the devicetrees as it is not acceptable to pretend to have a device > on a board in order to bind the spidev driver in Linux. > > Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Applied, thanks!
diff --git a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts index 1a74ac3ee4ee..4caaecc19227 100644 --- a/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts +++ b/arch/arm64/boot/dts/freescale/imx8dxl-evk.dts @@ -722,12 +722,6 @@ &lpspi3 { pinctrl-names = "default"; pinctrl-0 = <&pinctrl_lpspi3>; status = "okay"; - - spidev0: spi@0 { - reg = <0>; - compatible = "rohm,dh2228fv"; - spi-max-frequency = <30000000>; - }; }; &iomuxc { diff --git a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts index 778741dbbb33..3f0fd147bbd0 100644 --- a/arch/arm64/boot/dts/freescale/imx8qm-mek.dts +++ b/arch/arm64/boot/dts/freescale/imx8qm-mek.dts @@ -287,12 +287,6 @@ &lpspi2 { pinctrl-0 = <&pinctrl_lpspi2 &pinctrl_lpspi2_cs>; cs-gpios = <&lsio_gpio3 10 GPIO_ACTIVE_LOW>; status = "okay"; - - spidev0: spi@0 { - reg = <0>; - compatible = "rohm,dh2228fv"; - spi-max-frequency = <30000000>; - }; }; &lsio_mu5 {