diff mbox series

[v7,4/5] wifi: brcmfmac: Add optional lpo clock enable support

Message ID 20240802025715.2360456-5-jacobe.zang@wesion.com (mailing list archive)
State New
Headers show
Series Add AP6275P wireless support | expand

Commit Message

Jacobe Zang Aug. 2, 2024, 2:57 a.m. UTC 
WiFi modules often require 32kHz clock to function. Add support to
enable the clock to PCIe driver and move "brcm,bcm4329-fmac" check
to the top of brcmf_of_probe. Change function prototypes from void
to int and add appropriate errno's for return values.

Co-developed-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Ondrej Jirman <megi@xff.cz>
Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
Change-Id: I21bf9e21b275452369dce1f50c2f092eded6376c
---
 .../wireless/broadcom/brcm80211/brcmfmac/of.c | 49 +++++++++++--------
 .../wireless/broadcom/brcm80211/brcmfmac/of.h |  4 +-
 2 files changed, 31 insertions(+), 22 deletions(-)

Comments

Arend van Spriel Aug. 2, 2024, 5:38 a.m. UTC | #1 
On August 2, 2024 4:57:48 AM Jacobe Zang <jacobe.zang@wesion.com> wrote:

> WiFi modules often require 32kHz clock to function. Add support to
> enable the clock to PCIe driver and move "brcm,bcm4329-fmac" check
> to the top of brcmf_of_probe. Change function prototypes from void
> to int and add appropriate errno's for return values.

Sorry, but this is moving in the wrong direction. The reason for changing 
from void to int was to propagate the error up to the bus, ie. PCIe, SDIO, 
or USB. Anyway, I reworked this patch last night to do just that. Let me 
send it out to you.

Regards,
Arend

> Co-developed-by: Ondrej Jirman <megi@xff.cz>
> Signed-off-by: Ondrej Jirman <megi@xff.cz>
> Signed-off-by: Jacobe Zang <jacobe.zang@wesion.com>
> Change-Id: I21bf9e21b275452369dce1f50c2f092eded6376c
> ---
> .../wireless/broadcom/brcm80211/brcmfmac/of.c | 49 +++++++++++--------
> .../wireless/broadcom/brcm80211/brcmfmac/of.h |  4 +-
> 2 files changed, 31 insertions(+), 22 deletions(-)
diff mbox series

Patch

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
index e406e11481a62..75773f65a9076 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -6,6 +6,7 @@ 
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/of_net.h>
+#include <linux/clk.h>
 
 #include <defs.h>
 #include "debug.h"
@@ -65,17 +66,21 @@  static int brcmf_of_get_country_codes(struct device *dev,
 	return 0;
 }
 
-void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
+int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 		    struct brcmf_mp_device *settings)
 {
 	struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
 	struct device_node *root, *np = dev->of_node;
+	struct clk *clk;
 	const char *prop;
 	int irq;
 	int err;
 	u32 irqf;
 	u32 val;
 
+	if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
+		return PTR_ERR_OR_ZERO(np);
+
 	/* Apple ARM64 platforms have their own idea of board type, passed in
 	 * via the device tree. They also have an antenna SKU parameter
 	 */
@@ -105,7 +110,7 @@  void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 		board_type = devm_kstrdup(dev, tmp, GFP_KERNEL);
 		if (!board_type) {
 			of_node_put(root);
-			return;
+			return PTR_ERR_OR_ZERO(board_type);
 		}
 		strreplace(board_type, '/', '-');
 		settings->board_type = board_type;
@@ -113,33 +118,37 @@  void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 		of_node_put(root);
 	}
 
-	if (!np || !of_device_is_compatible(np, "brcm,bcm4329-fmac"))
-		return;
-
 	err = brcmf_of_get_country_codes(dev, settings);
 	if (err)
 		brcmf_err("failed to get OF country code map (err=%d)\n", err);
 
 	of_get_mac_address(np, settings->mac);
 
-	if (bus_type != BRCMF_BUSTYPE_SDIO)
-		return;
+	if (bus_type == BRCMF_BUSTYPE_SDIO) {
+		if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
+			sdio->drive_strength = val;
 
-	if (of_property_read_u32(np, "brcm,drive-strength", &val) == 0)
-		sdio->drive_strength = val;
+		/* make sure there are interrupts defined in the node */
+		if (!of_property_present(np, "interrupts"))
+			return PTR_ERR_OR_ZERO(np);
 
-	/* make sure there are interrupts defined in the node */
-	if (!of_property_present(np, "interrupts"))
-		return;
+		irq = irq_of_parse_and_map(np, 0);
+		if (!irq) {
+			brcmf_err("interrupt could not be mapped\n");
+			return -EINVAL;
+		}
+		irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
 
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		brcmf_err("interrupt could not be mapped\n");
-		return;
+		sdio->oob_irq_supported = true;
+		sdio->oob_irq_nr = irq;
+		sdio->oob_irq_flags = irqf;
 	}
-	irqf = irqd_get_trigger_type(irq_get_irq_data(irq));
 
-	sdio->oob_irq_supported = true;
-	sdio->oob_irq_nr = irq;
-	sdio->oob_irq_flags = irqf;
+	clk = devm_clk_get_optional_enabled(dev, "lpo");
+	if (!IS_ERR_OR_NULL(clk)) {
+		brcmf_dbg(INFO, "enabling 32kHz clock\n");
+		return clk_set_rate(clk, 32768);
+	} else {
+		return PTR_ERR_OR_ZERO(clk);
+	}
 }
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
index 10bf52253337e..8111286fc4b0c 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.h
@@ -3,10 +3,10 @@ 
  * Copyright (c) 2014 Broadcom Corporation
  */
 #ifdef CONFIG_OF
-void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
+int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 		    struct brcmf_mp_device *settings);
 #else
-static void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
+static int brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
 			   struct brcmf_mp_device *settings)
 {
 }