diff mbox series

[v2,2/2] ethernet: stmmac: dwmac-rk: Add GMAC support for RK3576

Message ID 20240808170113.82775-3-detlev.casanova@collabora.com (mailing list archive)
State New
Headers show
Series Add GMAC support for rk3576 | expand

Commit Message

Detlev Casanova Aug. 8, 2024, 5 p.m. UTC 
From: David Wu <david.wu@rock-chips.com>

Add constants and callback functions for the dwmac on RK3576 soc.

Signed-off-by: David Wu <david.wu@rock-chips.com>
[rebase, extracted bindings]
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
---
 .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 156 ++++++++++++++++++
 1 file changed, 156 insertions(+)

Comments

Heiko Stübner Aug. 9, 2024, 1:16 p.m. UTC | #1 
Hi Detlev,

Am Donnerstag, 8. August 2024, 19:00:18 CEST schrieb Detlev Casanova:
> From: David Wu <david.wu@rock-chips.com>
> 
> Add constants and callback functions for the dwmac on RK3576 soc.
> 
> Signed-off-by: David Wu <david.wu@rock-chips.com>
> [rebase, extracted bindings]
> Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
> ---
>  .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 156 ++++++++++++++++++
>  1 file changed, 156 insertions(+)
> 
> diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> index 7ae04d8d291c8..e1fa8fc9f4012 100644
> --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> @@ -1116,6 +1116,161 @@ static const struct rk_gmac_ops rk3568_ops = {
>  	},
>  };
>  
> +/* VCCIO0_1_3_IOC */
> +#define RK3576_VCCIO0_1_3_IOC_CON2		0X6408
> +#define RK3576_VCCIO0_1_3_IOC_CON3		0X640c
> +#define RK3576_VCCIO0_1_3_IOC_CON4		0X6410
> +#define RK3576_VCCIO0_1_3_IOC_CON5		0X6414
> +
> +#define RK3576_GMAC_RXCLK_DLY_ENABLE		GRF_BIT(15)
> +#define RK3576_GMAC_RXCLK_DLY_DISABLE		GRF_CLR_BIT(15)
> +#define RK3576_GMAC_TXCLK_DLY_ENABLE		GRF_BIT(7)
> +#define RK3576_GMAC_TXCLK_DLY_DISABLE		GRF_CLR_BIT(7)
> +
> +#define RK3576_GMAC_CLK_RX_DL_CFG(val)		HIWORD_UPDATE(val, 0x7F, 8)
> +#define RK3576_GMAC_CLK_TX_DL_CFG(val)		HIWORD_UPDATE(val, 0x7F, 0)
> +
> +/* SDGMAC_GRF */
> +#define RK3576_GRF_GMAC_CON0			0X0020
> +#define RK3576_GRF_GMAC_CON1			0X0024
> +
> +#define RK3576_GMAC_RMII_MODE			GRF_BIT(3)
> +#define RK3576_GMAC_RGMII_MODE			GRF_CLR_BIT(3)
> +
> +#define RK3576_GMAC_CLK_SELET_IO		GRF_BIT(7)
> +#define RK3576_GMAC_CLK_SELET_CRU		GRF_CLR_BIT(7)

nit: typos _CLK_SELECT_ ... missing the C in select

> +
> +#define RK3576_GMAC_CLK_RMII_DIV2		GRF_BIT(5)
> +#define RK3576_GMAC_CLK_RMII_DIV20		GRF_CLR_BIT(5)

I think those are backwards
The TRM says bit[5]=0: 25MHz (DIV2) and bit[5]=1: 2.5MHz (DIV20)

I guess nobody also on Rockchip's side tested a RMII phy on those controllrs


> +
> +#define RK3576_GMAC_CLK_RGMII_DIV1		\
> +			(GRF_CLR_BIT(6) | GRF_CLR_BIT(5))
> +#define RK3576_GMAC_CLK_RGMII_DIV5		\
> +			(GRF_BIT(6) | GRF_BIT(5))
> +#define RK3576_GMAC_CLK_RGMII_DIV50		\
> +			(GRF_BIT(6) | GRF_CLR_BIT(5))
> +

in contrast, these are correct and match the TRM


> +#define RK3576_GMAC_CLK_RMII_GATE		GRF_BIT(4)
> +#define RK3576_GMAC_CLK_RMII_NOGATE		GRF_CLR_BIT(4)
> +
> +static void rk3576_set_to_rgmii(struct rk_priv_data *bsp_priv,
> +				int tx_delay, int rx_delay)
> +{
> +	struct device *dev = &bsp_priv->pdev->dev;
> +	unsigned int offset_con;
> +
> +	if (IS_ERR(bsp_priv->grf) || IS_ERR(bsp_priv->php_grf)) {
> +		dev_err(dev, "Missing rockchip,grf or rockchip,php_grf property\n");
> +		return;
> +	}
> +
> +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> +					 RK3576_GRF_GMAC_CON0;
> +
> +	regmap_write(bsp_priv->grf, offset_con, RK3576_GMAC_RGMII_MODE);
> +
> +	offset_con = bsp_priv->id == 1 ? RK3576_VCCIO0_1_3_IOC_CON4 :
> +					 RK3576_VCCIO0_1_3_IOC_CON2;
> +
> +	/* m0 && m1 delay enabled */
> +	regmap_write(bsp_priv->php_grf, offset_con,
> +		     DELAY_ENABLE(RK3576, tx_delay, rx_delay));
> +	regmap_write(bsp_priv->php_grf, offset_con + 0x4,
> +		     DELAY_ENABLE(RK3576, tx_delay, rx_delay));
> +
> +	/* m0 && m1 delay value */
> +	regmap_write(bsp_priv->php_grf, offset_con,
> +		     RK3576_GMAC_CLK_TX_DL_CFG(tx_delay) |
> +		     RK3576_GMAC_CLK_RX_DL_CFG(rx_delay));
> +	regmap_write(bsp_priv->php_grf, offset_con + 0x4,
> +		     RK3576_GMAC_CLK_TX_DL_CFG(tx_delay) |
> +		     RK3576_GMAC_CLK_RX_DL_CFG(rx_delay));
> +}
> +
> +static void rk3576_set_to_rmii(struct rk_priv_data *bsp_priv)
> +{
> +	struct device *dev = &bsp_priv->pdev->dev;
> +	unsigned int offset_con;
> +
> +	if (IS_ERR(bsp_priv->php_grf)) {
> +		dev_err(dev, "%s: Missing rockchip,php_grf property\n", __func__);
> +		return;
> +	}
> +
> +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> +					 RK3576_GRF_GMAC_CON0;
> +
> +	regmap_write(bsp_priv->grf, offset_con, RK3576_GMAC_RMII_MODE);
> +}
> +
> +static void rk3576_set_gmac_speed(struct rk_priv_data *bsp_priv, int speed)
> +{
> +	struct device *dev = &bsp_priv->pdev->dev;
> +	unsigned int val = 0, offset_con;
> +
> +	switch (speed) {
> +	case 10:
> +		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
> +			val = RK3576_GMAC_CLK_RMII_DIV20;
> +		else
> +			val = RK3576_GMAC_CLK_RGMII_DIV50;

		val = bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII ?
				RK3576_GMAC_CLK_RMII_DIV20 :
				RK3576_GMAC_CLK_RGMII_DIV50;
perhaps?

> +		break;
> +	case 100:
> +		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
> +			val = RK3576_GMAC_CLK_RMII_DIV2;
> +		else
> +			val = RK3576_GMAC_CLK_RGMII_DIV5;

same as above?

> +		break;
> +	case 1000:
> +		if (bsp_priv->phy_iface != PHY_INTERFACE_MODE_RMII)
> +			val = RK3576_GMAC_CLK_RGMII_DIV1;
> +		else
> +			goto err;

		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
			goto err;

		val = RK3576_GMAC_CLK_RGMII_DIV1;


> +		break;
> +	default:
> +		goto err;
> +	}
> +
> +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> +					 RK3576_GRF_GMAC_CON0;
> +
> +	regmap_write(bsp_priv->grf, offset_con, val);
> +
> +	return;
> +err:
> +	dev_err(dev, "unknown speed value for GMAC speed=%d", speed);
> +}
> +
> +static void rk3576_set_clock_selection(struct rk_priv_data *bsp_priv, bool input,
> +				       bool enable)
> +{
> +	unsigned int val = input ? RK3576_GMAC_CLK_SELET_IO :
> +				   RK3576_GMAC_CLK_SELET_CRU;
> +	unsigned int offset_con;
> +
> +	val |= enable ? RK3576_GMAC_CLK_RMII_NOGATE :
> +			RK3576_GMAC_CLK_RMII_GATE;
> +
> +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> +					 RK3576_GRF_GMAC_CON0;

nit: alignment of both looks like it could be nicer

Heiko
Detlev Casanova Aug. 9, 2024, 2:38 p.m. UTC | #2 
On Friday, 9 August 2024 09:16:44 EDT Heiko Stübner wrote:
> Hi Detlev,
> 
> Am Donnerstag, 8. August 2024, 19:00:18 CEST schrieb Detlev Casanova:
> > From: David Wu <david.wu@rock-chips.com>
> > 
> > Add constants and callback functions for the dwmac on RK3576 soc.
> > 
> > Signed-off-by: David Wu <david.wu@rock-chips.com>
> > [rebase, extracted bindings]
> > Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
> > ---
> > 
> >  .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 156 ++++++++++++++++++
> >  1 file changed, 156 insertions(+)
> > 
> > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index
> > 7ae04d8d291c8..e1fa8fc9f4012 100644
> > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > @@ -1116,6 +1116,161 @@ static const struct rk_gmac_ops rk3568_ops = {
> > 
> >  	},
> >  
> >  };
> > 

[...]

> > +/* SDGMAC_GRF */
> > +#define RK3576_GRF_GMAC_CON0			0X0020
> > +#define RK3576_GRF_GMAC_CON1			0X0024
> > +
> > +#define RK3576_GMAC_RMII_MODE			GRF_BIT(3)
> > +#define RK3576_GMAC_RGMII_MODE			GRF_CLR_BIT(3)
> > +
> > +#define RK3576_GMAC_CLK_SELET_IO		GRF_BIT(7)
> > +#define RK3576_GMAC_CLK_SELET_CRU		GRF_CLR_BIT(7)
> 
> nit: typos _CLK_SELECT_ ... missing the C in select

Ack

> > +
> > +#define RK3576_GMAC_CLK_RMII_DIV2		GRF_BIT(5)
> > +#define RK3576_GMAC_CLK_RMII_DIV20		GRF_CLR_BIT(5)
> 
> I think those are backwards
> The TRM says bit[5]=0: 25MHz (DIV2) and bit[5]=1: 2.5MHz (DIV20)
> 
> I guess nobody also on Rockchip's side tested a RMII phy on those controllrs

Can't be sure about that. An error in the TRM is not impossible either, as for 
rk3588, it is also bit[5]=0: DIV20 and bit[5]=1: DIV2. I can switch them to 
match the TRM though, we may never now.

> > +
> > +#define RK3576_GMAC_CLK_RGMII_DIV1		\
> > +			(GRF_CLR_BIT(6) | GRF_CLR_BIT(5))
> > +#define RK3576_GMAC_CLK_RGMII_DIV5		\
> > +			(GRF_BIT(6) | GRF_BIT(5))
> > +#define RK3576_GMAC_CLK_RGMII_DIV50		\
> > +			(GRF_BIT(6) | GRF_CLR_BIT(5))
> > +
> 
> in contrast, these are correct and match the TRM
> 
> > +#define RK3576_GMAC_CLK_RMII_GATE		GRF_BIT(4)
> > +#define RK3576_GMAC_CLK_RMII_NOGATE		GRF_CLR_BIT(4)
> > +
> > +static void rk3576_set_to_rgmii(struct rk_priv_data *bsp_priv,
> > +				int tx_delay, int rx_delay)
> > +{
> > +	struct device *dev = &bsp_priv->pdev->dev;
> > +	unsigned int offset_con;
> > +
> > +	if (IS_ERR(bsp_priv->grf) || IS_ERR(bsp_priv->php_grf)) {
> > +		dev_err(dev, "Missing rockchip,grf or rockchip,php_grf 
property\n");
> > +		return;
> > +	}
> > +
> > +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> > +					 RK3576_GRF_GMAC_CON0;
> > +
> > +	regmap_write(bsp_priv->grf, offset_con, RK3576_GMAC_RGMII_MODE);
> > +
> > +	offset_con = bsp_priv->id == 1 ? RK3576_VCCIO0_1_3_IOC_CON4 :
> > +					 
RK3576_VCCIO0_1_3_IOC_CON2;
> > +
> > +	/* m0 && m1 delay enabled */
> > +	regmap_write(bsp_priv->php_grf, offset_con,
> > +		     DELAY_ENABLE(RK3576, tx_delay, rx_delay));
> > +	regmap_write(bsp_priv->php_grf, offset_con + 0x4,
> > +		     DELAY_ENABLE(RK3576, tx_delay, rx_delay));
> > +
> > +	/* m0 && m1 delay value */
> > +	regmap_write(bsp_priv->php_grf, offset_con,
> > +		     RK3576_GMAC_CLK_TX_DL_CFG(tx_delay) |
> > +		     RK3576_GMAC_CLK_RX_DL_CFG(rx_delay));
> > +	regmap_write(bsp_priv->php_grf, offset_con + 0x4,
> > +		     RK3576_GMAC_CLK_TX_DL_CFG(tx_delay) |
> > +		     RK3576_GMAC_CLK_RX_DL_CFG(rx_delay));
> > +}
> > +
> > +static void rk3576_set_to_rmii(struct rk_priv_data *bsp_priv)
> > +{
> > +	struct device *dev = &bsp_priv->pdev->dev;
> > +	unsigned int offset_con;
> > +
> > +	if (IS_ERR(bsp_priv->php_grf)) {
> > +		dev_err(dev, "%s: Missing rockchip,php_grf property\n", 
__func__);
> > +		return;
> > +	}
> > +
> > +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> > +					 RK3576_GRF_GMAC_CON0;
> > +
> > +	regmap_write(bsp_priv->grf, offset_con, RK3576_GMAC_RMII_MODE);
> > +}
> > +
> > +static void rk3576_set_gmac_speed(struct rk_priv_data *bsp_priv, int
> > speed) +{
> > +	struct device *dev = &bsp_priv->pdev->dev;
> > +	unsigned int val = 0, offset_con;
> > +
> > +	switch (speed) {
> > +	case 10:
> > +		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
> > +			val = RK3576_GMAC_CLK_RMII_DIV20;
> > +		else
> > +			val = RK3576_GMAC_CLK_RGMII_DIV50;
> 
> 		val = bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII ?
> 				RK3576_GMAC_CLK_RMII_DIV20 :
> 				RK3576_GMAC_CLK_RGMII_DIV50;
> perhaps?

This way matches how it is written in rk3588_set_gmac_speed(). I find that 
having similar code for similar functions helps reading and understanding it 
better (although I agree that your suggestion looks better).

I'd rather keep it like it is for now if that's ok.

> > +		break;
> > +	case 100:
> > +		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
> > +			val = RK3576_GMAC_CLK_RMII_DIV2;
> > +		else
> > +			val = RK3576_GMAC_CLK_RGMII_DIV5;
> 
> same as above?
> 
> > +		break;
> > +	case 1000:
> > +		if (bsp_priv->phy_iface != PHY_INTERFACE_MODE_RMII)
> > +			val = RK3576_GMAC_CLK_RGMII_DIV1;
> > +		else
> > +			goto err;
> 
> 		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
> 			goto err;
> 
> 		val = RK3576_GMAC_CLK_RGMII_DIV1;
> 
> > +		break;
> > +	default:
> > +		goto err;
> > +	}
> > +
> > +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> > +					 RK3576_GRF_GMAC_CON0;
> > +
> > +	regmap_write(bsp_priv->grf, offset_con, val);
> > +
> > +	return;
> > +err:
> > +	dev_err(dev, "unknown speed value for GMAC speed=%d", speed);
> > +}
> > +
> > +static void rk3576_set_clock_selection(struct rk_priv_data *bsp_priv,
> > bool input, +				       bool enable)
> > +{
> > +	unsigned int val = input ? RK3576_GMAC_CLK_SELET_IO :
> > +				   RK3576_GMAC_CLK_SELET_CRU;
> > +	unsigned int offset_con;
> > +
> > +	val |= enable ? RK3576_GMAC_CLK_RMII_NOGATE :
> > +			RK3576_GMAC_CLK_RMII_GATE;
> > +
> > +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> > +					 RK3576_GRF_GMAC_CON0;
> 
> nit: alignment of both looks like it could be nicer

That's strange, the alignments looks good in vim and git diff. It also looks 
nice on the archive: https://lore.kernel.org/linux-rockchip/
20240808170113.82775-3-detlev.casanova@collabora.com/
 

Regards,
Detlev
Heiko Stübner Aug. 15, 2024, 4:35 p.m. UTC | #3 
Hi David,

Am Montag, 12. August 2024, 04:21:27 CEST schrieb David Wu:
> Hi Detlev, Heiko:
> 
> It's really a TRM error here, RMII PHY has been verified for this patch.

thanks for double checking.


Heiko

> 在 2024/8/9 22:38, Detlev Casanova 写道:
> > Can't be sure about that. An error in the TRM is not impossible either, as for
> > rk3588, it is also bit[5]=0: DIV20 and bit[5]=1: DIV2. I can switch them to
> > match the TRM though, we may never now.
Heiko Stübner Aug. 15, 2024, 4:37 p.m. UTC | #4 
Am Freitag, 9. August 2024, 16:38:23 CEST schrieb Detlev Casanova:
> On Friday, 9 August 2024 09:16:44 EDT Heiko Stübner wrote:
> > Hi Detlev,
> > 
> > Am Donnerstag, 8. August 2024, 19:00:18 CEST schrieb Detlev Casanova:
> > > From: David Wu <david.wu@rock-chips.com>
> > > 
> > > Add constants and callback functions for the dwmac on RK3576 soc.
> > > 
> > > Signed-off-by: David Wu <david.wu@rock-chips.com>
> > > [rebase, extracted bindings]
> > > Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
> > > ---
> > > 
> > >  .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 156 ++++++++++++++++++
> > >  1 file changed, 156 insertions(+)
> > > 
> > > diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > > b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c index
> > > 7ae04d8d291c8..e1fa8fc9f4012 100644
> > > --- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > > +++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
> > > @@ -1116,6 +1116,161 @@ static const struct rk_gmac_ops rk3568_ops = {
> > > 
> > >  	},
> > >  
> > >  };
> > > 
> 
> [...]
> 
> > > +/* SDGMAC_GRF */
> > > +#define RK3576_GRF_GMAC_CON0			0X0020
> > > +#define RK3576_GRF_GMAC_CON1			0X0024
> > > +
> > > +#define RK3576_GMAC_RMII_MODE			GRF_BIT(3)
> > > +#define RK3576_GMAC_RGMII_MODE			GRF_CLR_BIT(3)
> > > +
> > > +#define RK3576_GMAC_CLK_SELET_IO		GRF_BIT(7)
> > > +#define RK3576_GMAC_CLK_SELET_CRU		GRF_CLR_BIT(7)
> > 
> > nit: typos _CLK_SELECT_ ... missing the C in select
> 
> Ack

So all points below are resolved, and with the C added
Reviewed-by: Heiko Stuebner <heiko@sntech.de>

> 
> > > +
> > > +#define RK3576_GMAC_CLK_RMII_DIV2		GRF_BIT(5)
> > > +#define RK3576_GMAC_CLK_RMII_DIV20		GRF_CLR_BIT(5)
> > 
> > I think those are backwards
> > The TRM says bit[5]=0: 25MHz (DIV2) and bit[5]=1: 2.5MHz (DIV20)
> > 
> > I guess nobody also on Rockchip's side tested a RMII phy on those controllrs
> 
> Can't be sure about that. An error in the TRM is not impossible either, as for 
> rk3588, it is also bit[5]=0: DIV20 and bit[5]=1: DIV2. I can switch them to 
> match the TRM though, we may never now.

As David said, the TRM is wrong and the code is correct, so all good


> 
> > > +
> > > +#define RK3576_GMAC_CLK_RGMII_DIV1		\
> > > +			(GRF_CLR_BIT(6) | GRF_CLR_BIT(5))
> > > +#define RK3576_GMAC_CLK_RGMII_DIV5		\
> > > +			(GRF_BIT(6) | GRF_BIT(5))
> > > +#define RK3576_GMAC_CLK_RGMII_DIV50		\
> > > +			(GRF_BIT(6) | GRF_CLR_BIT(5))
> > > +
> > 
> > in contrast, these are correct and match the TRM
> > 
> > > +#define RK3576_GMAC_CLK_RMII_GATE		GRF_BIT(4)
> > > +#define RK3576_GMAC_CLK_RMII_NOGATE		GRF_CLR_BIT(4)
> > > +
> > > +static void rk3576_set_to_rgmii(struct rk_priv_data *bsp_priv,
> > > +				int tx_delay, int rx_delay)
> > > +{
> > > +	struct device *dev = &bsp_priv->pdev->dev;
> > > +	unsigned int offset_con;
> > > +
> > > +	if (IS_ERR(bsp_priv->grf) || IS_ERR(bsp_priv->php_grf)) {
> > > +		dev_err(dev, "Missing rockchip,grf or rockchip,php_grf 
> property\n");
> > > +		return;
> > > +	}
> > > +
> > > +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> > > +					 RK3576_GRF_GMAC_CON0;
> > > +
> > > +	regmap_write(bsp_priv->grf, offset_con, RK3576_GMAC_RGMII_MODE);
> > > +
> > > +	offset_con = bsp_priv->id == 1 ? RK3576_VCCIO0_1_3_IOC_CON4 :
> > > +					 
> RK3576_VCCIO0_1_3_IOC_CON2;
> > > +
> > > +	/* m0 && m1 delay enabled */
> > > +	regmap_write(bsp_priv->php_grf, offset_con,
> > > +		     DELAY_ENABLE(RK3576, tx_delay, rx_delay));
> > > +	regmap_write(bsp_priv->php_grf, offset_con + 0x4,
> > > +		     DELAY_ENABLE(RK3576, tx_delay, rx_delay));
> > > +
> > > +	/* m0 && m1 delay value */
> > > +	regmap_write(bsp_priv->php_grf, offset_con,
> > > +		     RK3576_GMAC_CLK_TX_DL_CFG(tx_delay) |
> > > +		     RK3576_GMAC_CLK_RX_DL_CFG(rx_delay));
> > > +	regmap_write(bsp_priv->php_grf, offset_con + 0x4,
> > > +		     RK3576_GMAC_CLK_TX_DL_CFG(tx_delay) |
> > > +		     RK3576_GMAC_CLK_RX_DL_CFG(rx_delay));
> > > +}
> > > +
> > > +static void rk3576_set_to_rmii(struct rk_priv_data *bsp_priv)
> > > +{
> > > +	struct device *dev = &bsp_priv->pdev->dev;
> > > +	unsigned int offset_con;
> > > +
> > > +	if (IS_ERR(bsp_priv->php_grf)) {
> > > +		dev_err(dev, "%s: Missing rockchip,php_grf property\n", 
> __func__);
> > > +		return;
> > > +	}
> > > +
> > > +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> > > +					 RK3576_GRF_GMAC_CON0;
> > > +
> > > +	regmap_write(bsp_priv->grf, offset_con, RK3576_GMAC_RMII_MODE);
> > > +}
> > > +
> > > +static void rk3576_set_gmac_speed(struct rk_priv_data *bsp_priv, int
> > > speed) +{
> > > +	struct device *dev = &bsp_priv->pdev->dev;
> > > +	unsigned int val = 0, offset_con;
> > > +
> > > +	switch (speed) {
> > > +	case 10:
> > > +		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
> > > +			val = RK3576_GMAC_CLK_RMII_DIV20;
> > > +		else
> > > +			val = RK3576_GMAC_CLK_RGMII_DIV50;
> > 
> > 		val = bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII ?
> > 				RK3576_GMAC_CLK_RMII_DIV20 :
> > 				RK3576_GMAC_CLK_RGMII_DIV50;
> > perhaps?
> 
> This way matches how it is written in rk3588_set_gmac_speed(). I find that 
> having similar code for similar functions helps reading and understanding it 
> better (although I agree that your suggestion looks better).
> 
> I'd rather keep it like it is for now if that's ok.

ok, there is not much difference between the two variants anyway.


> > > +		break;
> > > +	case 100:
> > > +		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
> > > +			val = RK3576_GMAC_CLK_RMII_DIV2;
> > > +		else
> > > +			val = RK3576_GMAC_CLK_RGMII_DIV5;
> > 
> > same as above?
> > 
> > > +		break;
> > > +	case 1000:
> > > +		if (bsp_priv->phy_iface != PHY_INTERFACE_MODE_RMII)
> > > +			val = RK3576_GMAC_CLK_RGMII_DIV1;
> > > +		else
> > > +			goto err;
> > 
> > 		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
> > 			goto err;
> > 
> > 		val = RK3576_GMAC_CLK_RGMII_DIV1;
> > 
> > > +		break;
> > > +	default:
> > > +		goto err;
> > > +	}
> > > +
> > > +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> > > +					 RK3576_GRF_GMAC_CON0;
> > > +
> > > +	regmap_write(bsp_priv->grf, offset_con, val);
> > > +
> > > +	return;
> > > +err:
> > > +	dev_err(dev, "unknown speed value for GMAC speed=%d", speed);
> > > +}
> > > +
> > > +static void rk3576_set_clock_selection(struct rk_priv_data *bsp_priv,
> > > bool input, +				       bool enable)
> > > +{
> > > +	unsigned int val = input ? RK3576_GMAC_CLK_SELET_IO :
> > > +				   RK3576_GMAC_CLK_SELET_CRU;
> > > +	unsigned int offset_con;
> > > +
> > > +	val |= enable ? RK3576_GMAC_CLK_RMII_NOGATE :
> > > +			RK3576_GMAC_CLK_RMII_GATE;
> > > +
> > > +	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
> > > +					 RK3576_GRF_GMAC_CON0;
> > 
> > nit: alignment of both looks like it could be nicer
> 
> That's strange, the alignments looks good in vim and git diff. It also looks 
> nice on the archive: https://lore.kernel.org/linux-rockchip/
> 20240808170113.82775-3-detlev.casanova@collabora.com/

ok, probably just some display artifact here :-)
diff mbox series

Patch

diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 7ae04d8d291c8..e1fa8fc9f4012 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -1116,6 +1116,161 @@  static const struct rk_gmac_ops rk3568_ops = {
 	},
 };
 
+/* VCCIO0_1_3_IOC */
+#define RK3576_VCCIO0_1_3_IOC_CON2		0X6408
+#define RK3576_VCCIO0_1_3_IOC_CON3		0X640c
+#define RK3576_VCCIO0_1_3_IOC_CON4		0X6410
+#define RK3576_VCCIO0_1_3_IOC_CON5		0X6414
+
+#define RK3576_GMAC_RXCLK_DLY_ENABLE		GRF_BIT(15)
+#define RK3576_GMAC_RXCLK_DLY_DISABLE		GRF_CLR_BIT(15)
+#define RK3576_GMAC_TXCLK_DLY_ENABLE		GRF_BIT(7)
+#define RK3576_GMAC_TXCLK_DLY_DISABLE		GRF_CLR_BIT(7)
+
+#define RK3576_GMAC_CLK_RX_DL_CFG(val)		HIWORD_UPDATE(val, 0x7F, 8)
+#define RK3576_GMAC_CLK_TX_DL_CFG(val)		HIWORD_UPDATE(val, 0x7F, 0)
+
+/* SDGMAC_GRF */
+#define RK3576_GRF_GMAC_CON0			0X0020
+#define RK3576_GRF_GMAC_CON1			0X0024
+
+#define RK3576_GMAC_RMII_MODE			GRF_BIT(3)
+#define RK3576_GMAC_RGMII_MODE			GRF_CLR_BIT(3)
+
+#define RK3576_GMAC_CLK_SELET_IO		GRF_BIT(7)
+#define RK3576_GMAC_CLK_SELET_CRU		GRF_CLR_BIT(7)
+
+#define RK3576_GMAC_CLK_RMII_DIV2		GRF_BIT(5)
+#define RK3576_GMAC_CLK_RMII_DIV20		GRF_CLR_BIT(5)
+
+#define RK3576_GMAC_CLK_RGMII_DIV1		\
+			(GRF_CLR_BIT(6) | GRF_CLR_BIT(5))
+#define RK3576_GMAC_CLK_RGMII_DIV5		\
+			(GRF_BIT(6) | GRF_BIT(5))
+#define RK3576_GMAC_CLK_RGMII_DIV50		\
+			(GRF_BIT(6) | GRF_CLR_BIT(5))
+
+#define RK3576_GMAC_CLK_RMII_GATE		GRF_BIT(4)
+#define RK3576_GMAC_CLK_RMII_NOGATE		GRF_CLR_BIT(4)
+
+static void rk3576_set_to_rgmii(struct rk_priv_data *bsp_priv,
+				int tx_delay, int rx_delay)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+	unsigned int offset_con;
+
+	if (IS_ERR(bsp_priv->grf) || IS_ERR(bsp_priv->php_grf)) {
+		dev_err(dev, "Missing rockchip,grf or rockchip,php_grf property\n");
+		return;
+	}
+
+	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
+					 RK3576_GRF_GMAC_CON0;
+
+	regmap_write(bsp_priv->grf, offset_con, RK3576_GMAC_RGMII_MODE);
+
+	offset_con = bsp_priv->id == 1 ? RK3576_VCCIO0_1_3_IOC_CON4 :
+					 RK3576_VCCIO0_1_3_IOC_CON2;
+
+	/* m0 && m1 delay enabled */
+	regmap_write(bsp_priv->php_grf, offset_con,
+		     DELAY_ENABLE(RK3576, tx_delay, rx_delay));
+	regmap_write(bsp_priv->php_grf, offset_con + 0x4,
+		     DELAY_ENABLE(RK3576, tx_delay, rx_delay));
+
+	/* m0 && m1 delay value */
+	regmap_write(bsp_priv->php_grf, offset_con,
+		     RK3576_GMAC_CLK_TX_DL_CFG(tx_delay) |
+		     RK3576_GMAC_CLK_RX_DL_CFG(rx_delay));
+	regmap_write(bsp_priv->php_grf, offset_con + 0x4,
+		     RK3576_GMAC_CLK_TX_DL_CFG(tx_delay) |
+		     RK3576_GMAC_CLK_RX_DL_CFG(rx_delay));
+}
+
+static void rk3576_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+	unsigned int offset_con;
+
+	if (IS_ERR(bsp_priv->php_grf)) {
+		dev_err(dev, "%s: Missing rockchip,php_grf property\n", __func__);
+		return;
+	}
+
+	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
+					 RK3576_GRF_GMAC_CON0;
+
+	regmap_write(bsp_priv->grf, offset_con, RK3576_GMAC_RMII_MODE);
+}
+
+static void rk3576_set_gmac_speed(struct rk_priv_data *bsp_priv, int speed)
+{
+	struct device *dev = &bsp_priv->pdev->dev;
+	unsigned int val = 0, offset_con;
+
+	switch (speed) {
+	case 10:
+		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
+			val = RK3576_GMAC_CLK_RMII_DIV20;
+		else
+			val = RK3576_GMAC_CLK_RGMII_DIV50;
+		break;
+	case 100:
+		if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_RMII)
+			val = RK3576_GMAC_CLK_RMII_DIV2;
+		else
+			val = RK3576_GMAC_CLK_RGMII_DIV5;
+		break;
+	case 1000:
+		if (bsp_priv->phy_iface != PHY_INTERFACE_MODE_RMII)
+			val = RK3576_GMAC_CLK_RGMII_DIV1;
+		else
+			goto err;
+		break;
+	default:
+		goto err;
+	}
+
+	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
+					 RK3576_GRF_GMAC_CON0;
+
+	regmap_write(bsp_priv->grf, offset_con, val);
+
+	return;
+err:
+	dev_err(dev, "unknown speed value for GMAC speed=%d", speed);
+}
+
+static void rk3576_set_clock_selection(struct rk_priv_data *bsp_priv, bool input,
+				       bool enable)
+{
+	unsigned int val = input ? RK3576_GMAC_CLK_SELET_IO :
+				   RK3576_GMAC_CLK_SELET_CRU;
+	unsigned int offset_con;
+
+	val |= enable ? RK3576_GMAC_CLK_RMII_NOGATE :
+			RK3576_GMAC_CLK_RMII_GATE;
+
+	offset_con = bsp_priv->id == 1 ? RK3576_GRF_GMAC_CON1 :
+					 RK3576_GRF_GMAC_CON0;
+
+	regmap_write(bsp_priv->grf, offset_con, val);
+}
+
+static const struct rk_gmac_ops rk3576_ops = {
+	.set_to_rgmii = rk3576_set_to_rgmii,
+	.set_to_rmii = rk3576_set_to_rmii,
+	.set_rgmii_speed = rk3576_set_gmac_speed,
+	.set_rmii_speed = rk3576_set_gmac_speed,
+	.set_clock_selection = rk3576_set_clock_selection,
+	.regs_valid = true,
+	.regs = {
+		0x2a220000, /* gmac0 */
+		0x2a230000, /* gmac1 */
+		0x0, /* sentinel */
+	},
+};
+
 /* sys_grf */
 #define RK3588_GRF_GMAC_CON7			0X031c
 #define RK3588_GRF_GMAC_CON8			0X0320
@@ -1908,6 +2063,7 @@  static const struct of_device_id rk_gmac_dwmac_match[] = {
 	{ .compatible = "rockchip,rk3368-gmac", .data = &rk3368_ops },
 	{ .compatible = "rockchip,rk3399-gmac", .data = &rk3399_ops },
 	{ .compatible = "rockchip,rk3568-gmac", .data = &rk3568_ops },
+	{ .compatible = "rockchip,rk3576-gmac", .data = &rk3576_ops },
 	{ .compatible = "rockchip,rk3588-gmac", .data = &rk3588_ops },
 	{ .compatible = "rockchip,rv1108-gmac", .data = &rv1108_ops },
 	{ .compatible = "rockchip,rv1126-gmac", .data = &rv1126_ops },