@@ -407,6 +407,23 @@ fspim0_cs1: fspim0-cs1 {
<2 RK_PD7 2 &pcfg_pull_up_drv_level_2>;
};
+ /omit-if-no-ref/
+ fspim1_pins: fspim1-pins {
+ rockchip,pins =
+ /* fspi_clk_m1 */
+ <2 RK_PB3 5 &pcfg_pull_up_drv_level_2>,
+ /* fspi_cs0n_m1 */
+ <2 RK_PB4 2 &pcfg_pull_up_drv_level_2>,
+ /* fspi_d0_m1 */
+ <2 RK_PA6 5 &pcfg_pull_up_drv_level_2>,
+ /* fspi_d1_m1 */
+ <2 RK_PA7 5 &pcfg_pull_up_drv_level_2>,
+ /* fspi_d2_m1 */
+ <2 RK_PB0 5 &pcfg_pull_up_drv_level_2>,
+ /* fspi_d3_m1 */
+ <2 RK_PB1 5 &pcfg_pull_up_drv_level_2>;
+ };
+
/omit-if-no-ref/
fspim2_pins: fspim2-pins {
rockchip,pins =
FriendlyELEC NanoPC-T6 has 32MB of SPI flash connected to SPI M1 lines (always present on LTS version, optional on non-LTS one). Signed-off-by: Marcin Juszkiewicz <marcin.juszkiewicz@linaro.org> --- arch/arm64/boot/dts/rockchip/rk3588-base-pinctrl.dtsi | 17 +++++++++++++++++ 1 file changed, 17 insertions(+)