| Message ID | 20240829132100.1723127-4-heiko@sntech.de (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | Some fixes for issues found by dtbs check | expand |
diff --git a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi index 94a1c83a322d..d035a44e5b20 100644 --- a/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi @@ -186,7 +186,6 @@ vcc3v3_pcie30: vcc3v3-pcie30-regulator { vcc3v3_sd_s0: vcc3v3-sd-s0-regulator { compatible = "regulator-fixed"; - enable-active-low; gpio = <&gpio4 RK_PA5 GPIO_ACTIVE_LOW>; regulator-boot-on; regulator-max-microvolt = <3300000>;
vcc3v3-sd-s0-regulator used enable-active-low. According the binding of the fixed regulator, that is the assumed mode of operation if enable-active-high is not specified. So this is property is not part of the binding, therefore remove it. Signed-off-by: Heiko Stuebner <heiko@sntech.de> --- arch/arm64/boot/dts/rockchip/rk3588-nanopc-t6.dtsi | 1 - 1 file changed, 1 deletion(-)