| Message ID | 20241007105657.6203-6-didi.debian@cknow.org (mailing list archive) |
|---|---|
| State | New |
| Headers | show |
| Series | [1/4] arm64: dts: rockchip: Add PD to csi dphy node on rk356x | expand |
Hey :-) , Am Montag, 7. Oktober 2024, 12:28:19 CEST schrieb Diederik de Haas: > Except for some compatibles, the "brcm,bluetooth.yaml" binding doesn't > allow the 'reset-gpios' property, so replace the invalid ones with the > 'shutdown-gpios' property. this probably needs more explanation in the commit message, because by name I'd expect reset and shutdown being different functionalities. But for these cases, things should be good, simply because when looking at the bt_enable_h pinctrl, that pin really provides the shutdown functionality. Heiko > Signed-off-by: Diederik de Haas <didi.debian@cknow.org> > --- > arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +- > arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 2 +- > 2 files changed, 2 insertions(+), 2 deletions(-) > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi > index 7381bb751852..100a2774bbb5 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi > @@ -686,9 +686,9 @@ bluetooth { > clock-names = "lpo"; > device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; > host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; > - reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; > pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>; > pinctrl-names = "default"; > + shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; > vbat-supply = <&vcc_wl>; > vddio-supply = <&vcca_1v8_pmu>; > }; > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi > index d09e6542e236..3e0cbfff96d8 100644 > --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi > +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi > @@ -402,9 +402,9 @@ bluetooth { > clock-names = "lpo"; > device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; > host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; > - reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; > pinctrl-names = "default"; > pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; > + shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; > vbat-supply = <&vcc_3v3>; > vddio-supply = <&vcc_1v8>; > }; >
Hello :) On Mon Oct 7, 2024 at 4:04 PM CEST, Heiko Stübner wrote: > Am Montag, 7. Oktober 2024, 12:28:19 CEST schrieb Diederik de Haas: > > Except for some compatibles, the "brcm,bluetooth.yaml" binding doesn't > > allow the 'reset-gpios' property, so replace the invalid ones with the > > 'shutdown-gpios' property. > > this probably needs more explanation in the commit message, because > by name I'd expect reset and shutdown being different functionalities. > > But for these cases, things should be good, simply because when looking > at the bt_enable_h pinctrl, that pin really provides the shutdown > functionality. I guess I forgot to add the reference to page 12 of the AzureWave-CM256SM datasheet (v1.9): Pin 34 'BT_REG_ON': Used by PMU to power up or power down the internal regulators used by the Bluetooth section. Also, when deasserted, this pin holds the Bluetooth section in reset. This pin has an internal 200k ohm pull down resistor that is enabled by default. It can be disabled through programming. So my research was more extensive then I actually put in the commit message ... will fix that in v2. Cheers, Diederik > > Signed-off-by: Diederik de Haas <didi.debian@cknow.org> > > --- > > arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +- > > arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 2 +- > > 2 files changed, 2 insertions(+), 2 deletions(-) > > > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi > > index 7381bb751852..100a2774bbb5 100644 > > --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi > > +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi > > @@ -686,9 +686,9 @@ bluetooth { > > clock-names = "lpo"; > > device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; > > host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; > > - reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; > > pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>; > > pinctrl-names = "default"; > > + shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; > > vbat-supply = <&vcc_wl>; > > vddio-supply = <&vcca_1v8_pmu>; > > }; > > diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi > > index d09e6542e236..3e0cbfff96d8 100644 > > --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi > > +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi > > @@ -402,9 +402,9 @@ bluetooth { > > clock-names = "lpo"; > > device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; > > host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; > > - reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; > > pinctrl-names = "default"; > > pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; > > + shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; > > vbat-supply = <&vcc_3v3>; > > vddio-supply = <&vcc_1v8>; > > }; > >
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi index 7381bb751852..100a2774bbb5 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi @@ -686,9 +686,9 @@ bluetooth { clock-names = "lpo"; device-wakeup-gpios = <&gpio0 RK_PC2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio0 RK_PC3 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; pinctrl-0 = <&bt_enable_h>, <&bt_host_wake_l>, <&bt_wake_h>; pinctrl-names = "default"; + shutdown-gpios = <&gpio0 RK_PC4 GPIO_ACTIVE_LOW>; vbat-supply = <&vcc_wl>; vddio-supply = <&vcca_1v8_pmu>; }; diff --git a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi index d09e6542e236..3e0cbfff96d8 100644 --- a/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi +++ b/arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi @@ -402,9 +402,9 @@ bluetooth { clock-names = "lpo"; device-wakeup-gpios = <&gpio2 RK_PB2 GPIO_ACTIVE_HIGH>; host-wakeup-gpios = <&gpio2 RK_PB1 GPIO_ACTIVE_HIGH>; - reset-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; pinctrl-names = "default"; pinctrl-0 = <&bt_host_wake_h &bt_reg_on_h &bt_wake_host_h>; + shutdown-gpios = <&gpio2 RK_PC0 GPIO_ACTIVE_LOW>; vbat-supply = <&vcc_3v3>; vddio-supply = <&vcc_1v8>; };
Except for some compatibles, the "brcm,bluetooth.yaml" binding doesn't allow the 'reset-gpios' property, so replace the invalid ones with the 'shutdown-gpios' property. Signed-off-by: Diederik de Haas <didi.debian@cknow.org> --- arch/arm64/boot/dts/rockchip/rk3566-pinenote.dtsi | 2 +- arch/arm64/boot/dts/rockchip/rk3566-radxa-cm3.dtsi | 2 +- 2 files changed, 2 insertions(+), 2 deletions(-)