[3/3] arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board

Message ID	20241028213314.476776-4-dmt.yashin@gmail.com (mailing list archive)
State	New
Headers	show Return-Path: <linux-rockchip-bounces+linux-rockchip=archiver.kernel.org@lists.infradead.org> From: Dmitry Yashin <dmt.yashin@gmail.com> To: Luca Ceresoli <luca.ceresoli@bootlin.com>, Liam Girdwood <lgirdwood@gmail.com>, Mark Brown <broonie@kernel.org>, Rob Herring <robh@kernel.org>, Krzysztof Kozlowski <krzk+dt@kernel.org>, Conor Dooley <conor+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de> Cc: linux-sound@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org, Dmitry Yashin <dmt.yashin@gmail.com> Subject: [PATCH 3/3] arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board Date: Tue, 29 Oct 2024 02:33:14 +0500 Message-ID: <20241028213314.476776-4-dmt.yashin@gmail.com> In-Reply-To: <20241028213314.476776-1-dmt.yashin@gmail.com> References: <20241028213314.476776-1-dmt.yashin@gmail.com> MIME-Version: 1.0 Precedence: list Content-Type: text/plain; charset="us-ascii" Content-Transfer-Encoding: 7bit Sender: "Linux-rockchip" <linux-rockchip-bounces@lists.infradead.org> Errors-To: linux-rockchip-bounces+linux-rockchip=archiver.kernel.org@lists.infradead.org
Series	arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board \| expand [0/3] arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board [1/3] ASoC: dt-bindings: rockchip,rk3308-codec: add port property [2/3] dt-bindings: arm: rockchip: add Banana Pi BPI-P2 Pro board [3/3] arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board

diff --git a/arch/arm64/boot/dts/rockchip/Makefile b/arch/arm64/boot/dts/rockchip/Makefile index 2e485553ce8b..4c1fd113bdef 100644 --- a/arch/arm64/boot/dts/rockchip/Makefile +++ b/arch/arm64/boot/dts/rockchip/Makefile @@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb +dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-bpi-p2-pro.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb diff --git a/arch/arm64/boot/dts/rockchip/rk3308-bpi-p2-pro.dts b/arch/arm64/boot/dts/rockchip/rk3308-bpi-p2-pro.dts new file mode 100644 index 000000000000..bd821fc38fea --- /dev/null +++ b/arch/arm64/boot/dts/rockchip/rk3308-bpi-p2-pro.dts @@ -0,0 +1,362 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) + +/dts-v1/; + +#include <dt-bindings/input/input.h> +#include <dt-bindings/leds/common.h> +#include "rk3308.dtsi" + +/ { + model = "Banana Pi BPI-P2 Pro (RK3308) Board"; + compatible = "sinovoip,rk3308-bpi-p2pro", "rockchip,rk3308"; + + aliases { + ethernet0 = &gmac; + mmc0 = &emmc; + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + + chosen { + stdout-path = "serial2:1500000n8"; + }; + + adc-keys { + compatible = "adc-keys"; + io-channels = <&saradc 1>; + io-channel-names = "buttons"; + keyup-threshold-microvolt = <1800000>; + poll-interval = <100>; + + button-recovery { + label = "Recovery"; + linux,code = <KEY_VENDOR>; + press-threshold-microvolt = <10000>; + }; + }; + + analog-sound { + compatible = "audio-graph-card"; + label = "rockchip,rk3308"; + + dais = <&i2s_8ch_2_p0>; + pinctrl-names = "default"; + pinctrl-0 = <&phone_ctl>; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&led_en0>, <&led_en1>; + + blue-led { + color = <LED_COLOR_ID_BLUE>; + default-state = "on"; + function = LED_FUNCTION_POWER; + gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>; + label = "blue:power"; + linux,default-trigger = "default-on"; + }; + + green-led { + color = <LED_COLOR_ID_GREEN>; + default-state = "on"; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>; + label = "green:heartbeat"; + linux,default-trigger = "heartbeat"; + }; + }; + + vdd_log: regulator-1v04-vdd-log { + compatible = "regulator-fixed"; + regulator-name = "vdd_log"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1040000>; + regulator-max-microvolt = <1040000>; + vin-supply = <&vcc_in>; + }; + + vcc_ddr: regulator-1v5-vcc-ddr { + compatible = "regulator-fixed"; + regulator-name = "vcc_ddr"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1500000>; + regulator-max-microvolt = <1500000>; + vin-supply = <&vcc_in>; + }; + + vcc_1v8: regulator-1v8-vcc { + compatible = "regulator-fixed"; + regulator-name = "vcc_1v8"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + vin-supply = <&vcc_io>; + }; + + vcc_io: regulator-3v3-vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + vin-supply = <&vcc_in>; + }; + + vcc_in: regulator-5v0-vcc-in { + compatible = "regulator-fixed"; + regulator-name = "vcc_in"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + }; + + vdd_core: regulator-vdd-core { + compatible = "pwm-regulator"; + pwms = <&pwm0 0 5000 1>; + pwm-supply = <&vcc_in>; + regulator-name = "vdd_core"; + regulator-always-on; + regulator-boot-on; + regulator-min-microvolt = <827000>; + regulator-max-microvolt = <1340000>; + regulator-settling-time-up-us = <250>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-0 = <&wifi_reg_on>; + pinctrl-names = "default"; + reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>; + }; +}; + +&codec { + status = "okay"; + + port { + codec_p0_0: endpoint { + remote-endpoint = <&i2s_8ch_2_p0_0>; + }; + }; +}; + +&cpu0 { + cpu-supply = <&vdd_core>; +}; + +&emmc { + cap-mmc-highspeed; + mmc-hs200-1_8v; + no-sd; + no-sdio; + non-removable; + pinctrl-names = "default"; + pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>; + status = "okay"; +}; + +&gmac { + assigned-clocks = <&cru SCLK_MAC>; + assigned-clock-parents = <&mac_clkin>; + clock_in_out = "input"; + phy-handle = <&rtl8201f>; + phy-supply = <&vcc_io>; + status = "okay"; + + mdio { + #address-cells = <1>; + #size-cells = <0>; + compatible = "snps,dwmac-mdio"; + + rtl8201f: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&mac_rst>; + reset-assert-us = <50000>; + reset-deassert-us = <50000>; + reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&i2s_8ch_2 { + #sound-dai-cells = <0>; + status = "okay"; + + i2s_8ch_2_p0: port { + i2s_8ch_2_p0_0: endpoint { + dai-format = "i2s"; + mclk-fs = <256>; + remote-endpoint = <&codec_p0_0>; + }; + }; +}; + +&io_domains { + vccio0-supply = <&vcc_io>; + vccio1-supply = <&vcc_io>; + vccio2-supply = <&vcc_io>; + vccio3-supply = <&vcc_io>; + vccio4-supply = <&vcc_1v8>; + vccio5-supply = <&vcc_io>; + status = "okay"; +}; + +&pinctrl { + pinctrl-names = "default"; + pinctrl-0 = <&rtc_32k>; + + bt { + bt_reg_on: bt-reg-on { + rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + bt_wake_host: bt-wake-host { + rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + host_wake_bt: host-wake-bt { + rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + gmac { + mac_rst: mac-rst { + rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + leds { + led_en0: led-en0 { + rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + led_en1: led-en1 { + rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sound { + phone_ctl: phone-ctl { + rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + wifi { + wifi_reg_on: wifi-reg-on { + rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + + wifi_wake_host: wifi-wake-host { + rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>; + }; + }; +}; + +&pwm0 { + pinctrl-names = "default"; + pinctrl-0 = <&pwm0_pin_pull_down>; + status = "okay"; +}; + +&saradc { + vref-supply = <&vcc_1v8>; + status = "okay"; +}; + +/* WIFI part of the AP6256 connected with SDIO */ +&sdio { + #address-cells = <1>; + #size-cells = <0>; + cap-sd-highspeed; + cap-sdio-irq; + disable-wp; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + no-mmc; + no-sd; + non-removable; + sd-uhs-sdr104; + status = "okay"; + + ap6256: wifi@1 { + compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac"; + reg = <1>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wake"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_wake_host>; + }; +}; + +&sdmmc { + cap-mmc-highspeed; + cap-sd-highspeed; + disable-wp; + vmmc-supply = <&vcc_io>; + status = "okay"; +}; + +&u2phy { + status = "okay"; +}; + +&u2phy_host { + status = "okay"; +}; + +&u2phy_otg { + status = "okay"; +}; + +&uart2 { + status = "okay"; +}; + +/* BT part of the AP6256 connected with UART */ +&uart4 { + uart-has-rtscts; + status = "okay"; + + bluetooth { + compatible = "brcm,bcm4345c5"; + clocks = <&cru SCLK_RTC32K>; + clock-names = "lpo"; + interrupt-parent = <&gpio4>; + interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>; + interrupt-names = "host-wakeup"; + device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>; + shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>; + max-speed = <1500000>; + pinctrl-names = "default"; + pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>; + vbat-supply = <&vcc_io>; + vddio-supply = <&vcc_1v8>; + }; +}; + +&usb20_otg { + dr_mode = "peripheral"; + status = "okay"; +}; + +&usb_host_ehci { + status = "okay"; +}; + +&usb_host_ohci { + status = "okay"; +}; + +&wdt { + status = "okay"; +};

[3/3] arm64: dts: rockchip: add Banana Pi BPI-P2 Pro board

Commit Message

Patch