@@ -5,6 +5,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-ctouch2-of10.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-engicam-px30-core-edimm2.2.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-firefly-jd4-core-mb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += px30-ringneck-haikou.dtb
+dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-bpi-p2-pro.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-evb.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-roc-cc.dtb
dtb-$(CONFIG_ARCH_ROCKCHIP) += rk3308-rock-pi-s.dtb
new file mode 100644
@@ -0,0 +1,362 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+
+/dts-v1/;
+
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/leds/common.h>
+#include "rk3308.dtsi"
+
+/ {
+ model = "Banana Pi P2 Pro (RK3308) Board";
+ compatible = "sinovoip,rk3308-bpi-p2pro", "rockchip,rk3308";
+
+ aliases {
+ ethernet0 = &gmac;
+ mmc0 = &emmc;
+ mmc1 = &sdmmc;
+ mmc2 = &sdio;
+ };
+
+ chosen {
+ stdout-path = "serial2:1500000n8";
+ };
+
+ adc-keys {
+ compatible = "adc-keys";
+ io-channels = <&saradc 1>;
+ io-channel-names = "buttons";
+ keyup-threshold-microvolt = <1800000>;
+ poll-interval = <100>;
+
+ button-recovery {
+ label = "Recovery";
+ linux,code = <KEY_VENDOR>;
+ press-threshold-microvolt = <10000>;
+ };
+ };
+
+ analog-sound {
+ compatible = "audio-graph-card";
+ label = "rockchip,rk3308";
+
+ dais = <&i2s_8ch_2_p0>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&phone_ctl>;
+ };
+
+ leds {
+ compatible = "gpio-leds";
+ pinctrl-names = "default";
+ pinctrl-0 = <&led_en0>, <&led_en1>;
+
+ blue-led {
+ color = <LED_COLOR_ID_BLUE>;
+ default-state = "on";
+ function = LED_FUNCTION_POWER;
+ gpios = <&gpio0 RK_PA6 GPIO_ACTIVE_HIGH>;
+ label = "blue:power";
+ linux,default-trigger = "default-on";
+ };
+
+ green-led {
+ color = <LED_COLOR_ID_GREEN>;
+ default-state = "on";
+ function = LED_FUNCTION_HEARTBEAT;
+ gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_HIGH>;
+ label = "green:heartbeat";
+ linux,default-trigger = "heartbeat";
+ };
+ };
+
+ vdd_log: regulator-1v04-vdd-log {
+ compatible = "regulator-fixed";
+ regulator-name = "vdd_log";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1040000>;
+ regulator-max-microvolt = <1040000>;
+ vin-supply = <&vcc_in>;
+ };
+
+ vcc_ddr: regulator-1v5-vcc-ddr {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_ddr";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1500000>;
+ regulator-max-microvolt = <1500000>;
+ vin-supply = <&vcc_in>;
+ };
+
+ vcc_1v8: regulator-1v8-vcc {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_1v8";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_io>;
+ };
+
+ vcc_io: regulator-3v3-vcc-io {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_io";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vcc_in>;
+ };
+
+ vcc_in: regulator-5v0-vcc-in {
+ compatible = "regulator-fixed";
+ regulator-name = "vcc_in";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ };
+
+ vdd_core: regulator-vdd-core {
+ compatible = "pwm-regulator";
+ pwms = <&pwm0 0 5000 1>;
+ pwm-supply = <&vcc_in>;
+ regulator-name = "vdd_core";
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-min-microvolt = <827000>;
+ regulator-max-microvolt = <1340000>;
+ regulator-settling-time-up-us = <250>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ pinctrl-0 = <&wifi_reg_on>;
+ pinctrl-names = "default";
+ reset-gpios = <&gpio0 RK_PA2 GPIO_ACTIVE_LOW>;
+ };
+};
+
+&codec {
+ status = "okay";
+
+ port {
+ codec_p0_0: endpoint {
+ remote-endpoint = <&i2s_8ch_2_p0_0>;
+ };
+ };
+};
+
+&cpu0 {
+ cpu-supply = <&vdd_core>;
+};
+
+&emmc {
+ cap-mmc-highspeed;
+ mmc-hs200-1_8v;
+ no-sd;
+ no-sdio;
+ non-removable;
+ pinctrl-names = "default";
+ pinctrl-0 = <&emmc_bus8 &emmc_clk &emmc_cmd &emmc_pwren>;
+ status = "okay";
+};
+
+&gmac {
+ assigned-clocks = <&cru SCLK_MAC>;
+ assigned-clock-parents = <&mac_clkin>;
+ clock_in_out = "input";
+ phy-handle = <&rtl8201f>;
+ phy-supply = <&vcc_io>;
+ status = "okay";
+
+ mdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ compatible = "snps,dwmac-mdio";
+
+ rtl8201f: ethernet-phy@1 {
+ compatible = "ethernet-phy-ieee802.3-c22";
+ reg = <1>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&mac_rst>;
+ reset-assert-us = <50000>;
+ reset-deassert-us = <50000>;
+ reset-gpios = <&gpio0 RK_PA7 GPIO_ACTIVE_LOW>;
+ };
+ };
+};
+
+&i2s_8ch_2 {
+ #sound-dai-cells = <0>;
+ status = "okay";
+
+ i2s_8ch_2_p0: port {
+ i2s_8ch_2_p0_0: endpoint {
+ dai-format = "i2s";
+ mclk-fs = <256>;
+ remote-endpoint = <&codec_p0_0>;
+ };
+ };
+};
+
+&io_domains {
+ vccio0-supply = <&vcc_io>;
+ vccio1-supply = <&vcc_io>;
+ vccio2-supply = <&vcc_io>;
+ vccio3-supply = <&vcc_io>;
+ vccio4-supply = <&vcc_1v8>;
+ vccio5-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&pinctrl {
+ pinctrl-names = "default";
+ pinctrl-0 = <&rtc_32k>;
+
+ bt {
+ bt_reg_on: bt-reg-on {
+ rockchip,pins = <4 RK_PB3 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ bt_wake_host: bt-wake-host {
+ rockchip,pins = <4 RK_PB4 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ host_wake_bt: host-wake-bt {
+ rockchip,pins = <4 RK_PB2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ gmac {
+ mac_rst: mac-rst {
+ rockchip,pins = <0 RK_PA7 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ leds {
+ led_en0: led-en0 {
+ rockchip,pins = <0 RK_PA5 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ led_en1: led-en1 {
+ rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ sound {
+ phone_ctl: phone-ctl {
+ rockchip,pins = <0 RK_PA1 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+ };
+
+ wifi {
+ wifi_reg_on: wifi-reg-on {
+ rockchip,pins = <0 RK_PA2 RK_FUNC_GPIO &pcfg_pull_none>;
+ };
+
+ wifi_wake_host: wifi-wake-host {
+ rockchip,pins = <0 RK_PA0 RK_FUNC_GPIO &pcfg_pull_down>;
+ };
+ };
+};
+
+&pwm0 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pwm0_pin_pull_down>;
+ status = "okay";
+};
+
+&saradc {
+ vref-supply = <&vcc_1v8>;
+ status = "okay";
+};
+
+/* WIFI part of the AP6256 connected with SDIO */
+&sdio {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ cap-sd-highspeed;
+ cap-sdio-irq;
+ disable-wp;
+ keep-power-in-suspend;
+ mmc-pwrseq = <&sdio_pwrseq>;
+ no-mmc;
+ no-sd;
+ non-removable;
+ sd-uhs-sdr104;
+ status = "okay";
+
+ ap6256: wifi@1 {
+ compatible = "brcm,bcm43456-fmac", "brcm,bcm4329-fmac";
+ reg = <1>;
+ interrupt-parent = <&gpio0>;
+ interrupts = <RK_PA0 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wake";
+ pinctrl-names = "default";
+ pinctrl-0 = <&wifi_wake_host>;
+ };
+};
+
+&sdmmc {
+ cap-mmc-highspeed;
+ cap-sd-highspeed;
+ disable-wp;
+ vmmc-supply = <&vcc_io>;
+ status = "okay";
+};
+
+&u2phy {
+ status = "okay";
+};
+
+&u2phy_host {
+ status = "okay";
+};
+
+&u2phy_otg {
+ status = "okay";
+};
+
+&uart2 {
+ status = "okay";
+};
+
+/* BT part of the AP6256 connected with UART */
+&uart4 {
+ uart-has-rtscts;
+ status = "okay";
+
+ bluetooth {
+ compatible = "brcm,bcm4345c5";
+ clocks = <&cru SCLK_RTC32K>;
+ clock-names = "lpo";
+ interrupt-parent = <&gpio4>;
+ interrupts = <RK_PB4 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "host-wakeup";
+ device-wakeup-gpios = <&gpio4 RK_PB2 GPIO_ACTIVE_HIGH>;
+ shutdown-gpios = <&gpio4 RK_PB3 GPIO_ACTIVE_HIGH>;
+ max-speed = <1500000>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&bt_reg_on &bt_wake_host &host_wake_bt>;
+ vbat-supply = <&vcc_io>;
+ vddio-supply = <&vcc_1v8>;
+ };
+};
+
+&usb20_otg {
+ dr_mode = "peripheral";
+ status = "okay";
+};
+
+&usb_host_ehci {
+ status = "okay";
+};
+
+&usb_host_ohci {
+ status = "okay";
+};
+
+&wdt {
+ status = "okay";
+};
Banana Pi P2 Pro is the SBC made by Shenzhen SINOVOIP based on Rockchip RK3308. Banana Pi P2 Pro features: - Rockchip RK3308B-S - DDR3 512 MB - eMMC 8 GB - 100M lan + onboard PoE - 40 pin and 12 pin headers - AP6256 BT + WIFI - TF card slot - 2x USB 2.0 (Type-C OTG and Type-A) - Headphone jack Add support for Banana Pi P2 Pro. Signed-off-by: Dmitry Yashin <dmt.yashin@gmail.com> --- arch/arm64/boot/dts/rockchip/Makefile | 1 + .../boot/dts/rockchip/rk3308-bpi-p2-pro.dts | 362 ++++++++++++++++++ 2 files changed, 363 insertions(+) create mode 100644 arch/arm64/boot/dts/rockchip/rk3308-bpi-p2-pro.dts